[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Help-gnucap] simulating with MOSFET
From: |
address@hidden |
Subject: |
[Help-gnucap] simulating with MOSFET |
Date: |
Tue, 12 Feb 2013 18:45:29 -0800 |
Hi,
I just started with GNUCAP with gschem (gEDA) and gspiceui. I was able
to simulate BJT based circuits but wanted to add BS170 MOSFET.
I read this post here:
http://lists.gnu.org/archive/html/help-gnucap/2010-10/msg00001.html
As stated in the post, in my schematic, I added BS170 with refdes of
M1 instead of Q1. When I extract the netlist using gnetlist M1 is
converted to QM1.
I edited the netlist by hand and changed QM1 to M1 and ran it through gnucap.
I still get following error:
M1: missing args -- need model name
Here is my gnucap session (including netlist) http://pastebin.com/3dj8HcW9
What could I be doing wrong? Is the model for BS170 wrong?
Thanks.
- [Help-gnucap] simulating with MOSFET,
address@hidden <=
- Re: [Help-gnucap] simulating with MOSFET, al davis, 2013/02/12
- Re: [Help-gnucap] simulating with MOSFET, address@hidden, 2013/02/12
- Re: [Help-gnucap] simulating with MOSFET, al davis, 2013/02/12
- Re: [Help-gnucap] simulating with MOSFET, address@hidden, 2013/02/12
- Re: [Help-gnucap] simulating with MOSFET, al davis, 2013/02/12
- Re: [Help-gnucap] simulating with MOSFET, address@hidden, 2013/02/12
- Re: [Help-gnucap] simulating with MOSFET, Felix Salfelder, 2013/02/13