[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Vortex NIC problem
From: |
Ciro Cavani |
Subject: |
Vortex NIC problem |
Date: |
04 Mar 2003 14:51:24 -0300 |
Hi,
I have a 3Com 3c905C-TX [Tornado] that I believe it is compatible with
GNU Mach and OSKit-Mach vortex driver, but it never works in Hurd (I
already use it on NetBSD, FreeBSD and Linux... the NIC had a similar
problem with linux < 2.2.17).
On GNU Mach, the device seem it is running because there is an eth0,
then I set translator pfinet, but I can't ping the gateway server.
It is like this (as it happens this was on bochs, but is the same):
hurd:~# ping 161.24.72.1
PING 161.24.72.1 (161.24.72.1): 56 data bytes
64 bytes from 161.24.73.87: Destination Host Unreachable
Vr HL TOS Len ID Flg off TTL Pro cks Src Dst Data
4 5 c0 8400 0200 0 0000 ff 01 d7e5 161.24.73.87 161.24.73.87
64 bytes from 161.24.73.87: Destination Host Unreachable
Vr HL TOS Len ID Flg off TTL Pro cks Src Dst Data
4 5 c0 8400 0300 0 0000 ff 01 d6e5 161.24.73.87 161.24.73.87
^C--- 161.24.72.1 ping statistics ---
4 packets transmitted, 0 packets received, 100% packet loss
hurd:~#
On OSKit-Mach, that I compile from CVS, when boot it show a common
message of device drive but no eth0 device probed. The translator die
before any ping.
I change my NIC by a friend's one (RealTek RTL8139C) and try GNU Mach
only... All works fine!!!
I like to try anything before think in buy other NIC. Somebody knows
what is happens?
--
Ciro Cavani <cavani@h8.ita.br>
Instituto Tecnológico de Aeronáutica
- Vortex NIC problem,
Ciro Cavani <=