[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: tics number and tics location
From: |
Evan |
Subject: |
Re: tics number and tics location |
Date: |
Thu, 15 Nov 2007 23:34:45 +0800 |
On Nov 15, 2007 2:10 AM, Henry F. Mollet <address@hidden> wrote:
> on 11/14/07 5:09 AM, Evan at address@hidden wrote:
>
> > Can I specify number of tics and their locations when ploting in octave?
> >
> > Thanks in advance.
> > _______________________________________________
> octave-2.9.17:1> get (gca)
> ans =
> {
> CUT
> xtick = [](0x0)
> ytick = [](0x0)
> ztick = [](0x0)
> CUT
>
> octave-2.9.17:2> set (gca, 'xtick', [0.0 0.5 1.0])
> octave-2.9.17:3> get (gca)
> CUT
> xtick =
>
> 0.00000 0.50000 1.00000
>
> ytick = [](0x0)
> ztick = [](0x0)
> CUT
>
> On my Mac the first get (gca) command will open an AquaTerm window with
> xaxis ticks [0 0.2 0.4 0.6 0.8 1] and same yaxis ticks and then the set
> command will change the x-axis ticks to [0.0, 0.5, 1.0] . Otherwise blank
> AquaTerm window without any plot.
> Henry
>
>
Thanks
If I don't want very tick labeled by a number, which property should I adjust