[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: impulse() giving error
From: |
Lukas Reichlin |
Subject: |
Re: impulse() giving error |
Date: |
Sat, 3 Apr 2010 12:55:06 +0200 |
On 03.04.2010, at 12:23, Huub wrote:
>
>> It is not possible to have both of them installed/loaded. If you install my
>> package (it becomes control-2.0 upon release of Octave 3.4), Octave will
>> remove control-1.0.11 automatically.
>>
>> Regards
>> Lukas
>
> It looks like there's some kind of error in the package:
>
> octave-3.2.3:5> pkg install control.tar.gz
> /var/folders/sS/sSh5rQruH4SgrVy6x4vesU+++TI/-Tmp-//ccOogLBg.s:2139:indirect
> jmp without `*'
> /var/folders/sS/sSh5rQruH4SgrVy6x4vesU+++TI/-Tmp-//ccOogLBg.s:2154:indirect
> jmp without `*'
> /var/folders/sS/sSh5rQruH4SgrVy6x4vesU+++TI/-Tmp-//ccOogLBg.s:2169:indirect
> jmp without `*'
> /var/folders/sS/sSh5rQruH4SgrVy6x4vesU+++TI/-Tmp-//ccOogLBg.s:2184:indirect
> jmp without `*'
>
> This goes on and on....
Let me guess: You are using Octave.app with g95 on MacOSX 10.6. These warnings
are due to an outdated version of the g95 Fortran compiler included with
Octave.app. You can safely ignore them. The package should install correctly
anyway. Note that installation may take up to several minutes (for compiling
the Fortran files). You can verify installation afterwards by running some
tests: try some of these
test ltimodels
test h2syn
test hinfsyn
test lyap
test care
...
- impulse() giving error, Huub, 2010/04/02
- Re: impulse() giving error, Huub, 2010/04/02
- Re: impulse() giving error, Doug Stewart, 2010/04/02
- Re: impulse() giving error, Lukas Reichlin, 2010/04/02
- Re: impulse() giving error, Huub, 2010/04/03
- Re: impulse() giving error, Lukas Reichlin, 2010/04/03
- Re: impulse() giving error, Huub, 2010/04/03
- Re: impulse() giving error,
Lukas Reichlin <=
- Re: impulse() giving error, Huub, 2010/04/03
- Re: impulse() giving error, Lukas Reichlin, 2010/04/03
- Re: impulse() giving error, Huub, 2010/04/03