[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Help-tar] Extracting from tape problem.
From: |
Tony |
Subject: |
Re: [Help-tar] Extracting from tape problem. |
Date: |
Thu, 2 Oct 2003 23:51:44 +0000 |
FYI,
If using an IDE Colorado Tape on SuSE, you must run the device with
scsi-emulation.:
SDB article: http://sdb.suse.de/en/sdb/html/mkrapp_colorado.html
Regards, Tony.
On Friday 29 August 2003 9:11 pm, Tony Hall wrote:
> Hi,
>
> I'm having a problem extracting an archive from tape, I can backup to the
> same device ok, but when I attempt to restore the archive I get the
> following error:
>
> tar: /dev/ht0: Cannot read: Input/output error
> tar: At beginning of tape, quitting now
> tar: Error is not recoverable: exiting now
>
> The commands I use are:
> Backup: tar -cvf /dev/ht0 /home ** Works OK.
> Restore: tar -xvf /dev/ht0 /home
>
> Device is an Internal HP Colorado 5Gb EIDE tape.
> OS - Linux, k2.4.18
> tar Version - (GNU tar) 1.13.18
>
> thx, Tony.
>
>
> _______________________________________________
> Help-tar mailing list
> address@hidden
> http://mail.gnu.org/mailman/listinfo/help-tar
- Re: [Help-tar] Extracting from tape problem.,
Tony <=