[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [igraph] install error with python-igraph 0.6
From: |
Arun |
Subject: |
Re: [igraph] install error with python-igraph 0.6 |
Date: |
Wed, 7 Jul 2010 17:56:06 -0500 |
Well, this is a fresh install of the OS - so, 0.53 has never existed
on the system. So not sure how there could be a version mismatch.
Anyways, after having trouble with installing 0.6 locally - I decided
to go back and just install 0.5, but I am still encountering
(different) problems.
I will start a new and separate thread.
Thanks.
On Wed, Jul 7, 2010 at 5:35 PM, Tamas Nepusz <address@hidden> wrote:
>> Thanks for quick response.
>>
>> Yes, I have it in my path. [...]
>> Any other clues as to what's going on?
> Well, the error message you are seeing is characteristic to the case when
> there is a version mismatch between the core igraph library and the Python
> interface. (E.g., the Python interface may correspond to 0.5.3 while the C
> core that is picked up by the Python module corresponds to 0.6). You may try
> the following:
>
> LD_DEBUG=libs python -m igraph
>
> This will instruct the dynamic to print some debug information on the
> standard error that tells you where it looks for specific libraries. You have
> to make sure that both core.so (the Python interface) and libigraph.so.* (the
> C core) is picked up from the right directory. If you need even more detail,
> you can also try LD_DEBUG=all, but be warned, the latter output is HUGE as it
> lists the bindings for every single symbol in the symbol table.
>
> Anyway, make sure that you don't have an older igraph library lying around on
> your computer that might be picked up by the linker before the one in your
> home directory.
>
> --
> Tamas
>
>
> _______________________________________________
> igraph-help mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/igraph-help
>