[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
LilyPond 2.5.8
From: |
Han-Wen Nienhuys |
Subject: |
LilyPond 2.5.8 |
Date: |
Mon, 17 Jan 2005 00:02:05 +0100 |
I've just uploaded LilyPond 2.5.8.
Version 2.5.8 is a release with many code cleanups relating to how
music expressions are stored internally. An important user-visible
change is the increased accuracy of error locations in the output.
Also, Werner has further cleaned up the MF font code.
2005-01-16 Graham Percival <address@hidden>
* Documentation/user/lilypond.tely: changed order of appendices;
unified index should be last.
* Documentation/user/notation.itely: add example of key signatures
and info about Staff.printKeyCancellation.
2005-01-16 Han-Wen Nienhuys <address@hidden>
* lily/include/repeated-music.hh (class Repeated_music): change
into "namespace" class.
* lily/event.cc: remove Key_change_event.
* lily/include/transposed-music.hh (class Transposed_music): remove.
* lily/transposed-music.cc: remove
* lily/include/relative-music.hh: remove.
* lily/include/music-sequence.hh (struct Music_sequence): change
into "namespace" class.
* lily/untransposable-music.cc (Module): remove
* lily/include/un-relativable-music.hh (Module): remove
* lily/include/untransposable-music.hh (Module): remove
* lily/include/music-list.hh (Module): remove file
* lily/un-relativable-music.cc: remove file.
2005-01-14 Jan Nieuwenhuizen <address@hidden>
* lily/parser.yy: Compile fix.
2005-01-14 Han-Wen Nienhuys <address@hidden>
* lily/include/music.hh (class Music): unvirtualize transpose().
* lily/sequential-music.cc: remove file.
* lily/include/lyric-combine-music.hh ("music.hh"): remove file.
* lily/slur-scoring.cc (get_best_curve): only switch on
DEBUG_SLUR_SCORING for non NDEBUG builds.
* lily/include/music.hh (class Music): replace Music::start_mom()
by start-callback property
* lily/include/grace-music.hh: remove file.
* lily/stem.cc (height): robustness fix.
* lily/time-scaled-music.cc: remove file.
* lily/include/music.hh (class Music): include SCM init argument.
(class Music): replace Music::get_length() virtual by
length-callback property everywhere.
* scripts/convert-ly.py (conv): add # to \property scalar value.
* mf/GNUmakefile: don't install *list.ly
2005-01-14 Jan Nieuwenhuizen <address@hidden>
* mf/GNUmakefile (CFF_FILES): Bugfix: only big cheeses and braces.
2005-01-12 Werner Lemberg <address@hidden>
This patch addresses the following problems in the feta sources
files which contribute to the fetaXX fonts.
. Many fixes for rasterization at low resolutions (consistent use of
`vround' and `hround', integer shift values for paths, applying
`eps' for mirrored paths, use of `define_whole_pixels' and
friends, etc.) -- while this probably looks like a waste of time
it has revealed deficiencies in some glyph shapes. See comment at
the end of feta-params.mf how vertical symmetry is achieved.
. The `---' operator has been replaced everywhere with `--'; this
both improves and considerably reduces the font size after
conversion with mf2pt1.
These change aren't explicitly mentioned below since virtually all
glyphs are affected.
Other notable differences:
. Glyphs from feta-accordion.mf now have charboxes around the
outline.
. Fixed incorrect charbox for `accDot'.
. The `rcomma' and `lcomma' glyphs were distorted due to a typo.
. Fixed position of the bow in the `upprall' glyph and its siblings.
. The bulb size in the `2/2 meter' and `4/4 meter' glyphs is now
dependent on the staff line thickness to avoid touching the middle
staff line at smaller sizes.
. Largely extended output for feta-testXX: Where useful, glyphs
are shown both between and on staff lines.
* mf/feta-params.mf (staff_space_rounded,
stafflinethickness_rounded, linethickness_rounded,
ledgerlinethickness_rounded, stemthickness_rounded): New variables.
Update all code which uses them where appropriate.
(feta_eps, feta_shift, feta_space_shift, feta_offset, feta_fillpen):
New variables used to control rasterization at low resolutions. Set
to zert if feta code is processed with metapost.
* mf/feta-macros.mf (draw_staff, draw_staff_outline): Updated.
(draw_rounded_block, draw_square_block): Updated to use `--' only.
(flare_path): Updated.
Make it work with `filldraw' (but only circular pens).
(hfloor, vfloor, hceiling, vceiling): New macros.
* mf/feta-params.mf (to_bp): New macro for mf2pt1.
(set_char_box): Updated.
Add code which emits specials for mf2pt1 if run with metapost.
* mf/feta-accordion.mf ("accDiscant", "accFreebase", "accStdbase"):
Use `draw' again in mf mode to have good pixel dropout control.
Fix intersection points of horizontal lines with circle.
("accDot"): Fix parameters for set_char_box.
("accOldEE"): Use `draw' again in mf mode to have good pixel dropout
control.
* mf/feta-banier.mf: Updated.
* mf/feta-bolletjes.mf (remember_pic): New variable, used for
testing.
(undraw_inside_ellipse): Remove `center' argument. Update all
callers.
(draw_brevis): New macro, called by "Brevis notehead".
(draw_whole_triangle_head): New macro, called by "Whole
trianglehead".
(draw_small_triangle_head): Use `filldraw'.
* mf/feta-eindelijk.mf: Remove useless global group.
Updated.
* mf/feta-klef.mf (draw_c_clef): Correct point positions for using
`filldraw'.
* mf/feta-pendaal.mf: Updated.
* mf/feta-puntje.mf: Updated.
* mf/feta-schrift.mf (draw_very_long_fermata): Simplified to use
less points.
("Flageolet"): Use `draw' again in mf mode to have good pixel
dropout control.
("Varied Coda"): Use `draw_block'.
(draw_comma): Fix typo.
(draw_arpeggio_arrow): Use `draw' also in mf mode to have good
pixel dropout control.
* mf/feta-slag.mf ("upprall", "downprall", "lineprall"): Fix start
position of bow.
* mf/feta-timesig.mf (draw_C): Reduce bulb size for smaller design
sizes.
* mf/feta-toevallig.mf (remember_pic): New variable, used for
testing.
(draw_meta_sharp): Much simplified.
("Sharp", "1/2 Sharp", "3/4 Sharp"): Don't rotate but shift.
* mf/feta-test-generic.mf: Include all files as in feta-generic.mf.
2005-01-13 Mats Bengtsson <address@hidden>
* Documentation/user/notation.itely (Ancient rests): Fix typo
(thanks Anthony)
2005-01-13 Jan Nieuwenhuizen <address@hidden>
* scm/auto-beam.scm (score-override-auto-beam-setting): New function.
* lily/main.cc (setup_paths): Add cff.
* mf/GNUmakefile (foe): Include actual target %.cff.
(INSTALLATION_OUT_SUFFIXES): Install CFF and SVG fonts too.
2005-01-10 Han-Wen Nienhuys <address@hidden>
* lily/include/lily-lexer.hh (class Lily_lexer): lose hungarian _b
suffix for main_input_b_.
* scm/music-functions.scm (toplevel-music-functions):
precompute music lengths for music expressions.
2005-01-11 Nicolas Sceaux <address@hidden>
* lily/include/input.hh (class Input): new `end_' slot for end of
input. Renamed defined_str0_ to start_.
* lily/input.cc (Input): Add Input::Input (Input const &) and
remove Input::Input (Source_file*, char const *). Use the new
slots.
(set_location): method used by bison to propagate input
locations (YYLLOC_DEFAULT).
(end_line_number, end_column_number, step_forward): new methods
* lily/input-scheme.cc (ly:input-both-locations): new function,
similar to ly:input-location, but also return the end line and
column.
* lily/include/includable-lexer.hh:
* lily/includable-lexer.cc:
* lily/include/lily-lexer.hh (class Lily_lexer):
* lily/lily-lexer.cc (add_lexed_char): Move add_lexed_char from
Includable_lexer to Lily_lexer, in order to update lexloc (the
yylloc), a new slot of Lily_lexer.
(here_input, LexerError): simplify by using the lexloc slot (aka
yylloc)
* lily/lexer.ll: #define yylloc to use input locations (it may
be useless here?). Fixed the #embedded_scm rule (step the location
forward in order to skip the sharp sign before parsing the scheme
expression)
* lily/include/lily-parser.hh (class Lily_parser):
* lily/lily-parser.cc: Remove push_spot(), pop_spot() and
here_input()
(parser_error): overload for more precise locations of errors.
* lily/parser.yy (YYLTYPE): set location type to Input
(YYLLOC_DEFAULT): use Input::set_location()
(yylex): add the YYLTYPE* location parameter.
Clean push_spot()/pop_spot()/here_input(), and use @$, @1, etc.
Give an Input parameter to THIS->parser-error() for more accurate
messages.
2005-01-10 Han-Wen Nienhuys <address@hidden>
* stepmake/aclocal.m4: do NDEBUG for optimizing builds.
* lily/include/beam.hh (DEBUG_QUANTING): performance: only switch
on BEAMQUANTING for non-NDEBUG builds.
* lily/stem.cc (head_count): performance: avoid String::String()
inside oft called function.
2005-01-09 Graham Percival <address@hidden>
* Documentation/user/examles.itely: attempted fix for broken
string quartet template.
* Documentation/user/notation.itely: remove unnecessary broken
link.
--
Han-Wen Nienhuys | address@hidden | http://www.xs4all.nl/~hanwen
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- LilyPond 2.5.8,
Han-Wen Nienhuys <=