[Libcdio-help] libcdio-0.78.2 fails with adaptec and plextor on linux 2.6.21.3

[BuraphaLinux Server]

Version:libcdio-0.78.2

Problem:

  The libcdio library cannot work with my computer.  Originally the problem
was thought to be xmms2, but the developers helped me find the problem.
We tried several different audio CDs and that makes no difference.
Finally they supplied a small sample program that demonstrates the problem
to help you with debugging the libcdio library.  The original cdparanoia can
rip a track, but the cd-paranoia from libcdio cannot (it segfaults).  The cd
used while running this sample is known good, plays fine on ide systems,
and cdparanoia-III-alpha9.8 can rip tracks from it on my computer which
then can play fine, but everything that uses libcdio does not work.  If you
need more data, please tell me.

Sample program:
-----8<   cut here   8<----
/* Author: Eclipser from xmms2 irc
  gcc -Wextra -Wall -ansi -pedantic $(pkg-config --libs --cflags
libcdio_cdda) cdio.c
  ./a.out /dev/sr0
*/
#include <cdio/cdda.h>
#include <stdlib.h>
#include <stdio.h>

CdIo_t*
open_cd( char const* device );

cdrom_drive_t*
open_cdda( CdIo_t* cdio );

int
main( int argc, char** argv )
{
   CdIo_t* cdio = NULL;
   cdrom_drive_t* drive = NULL;
   if( argc != 2 ) {
       printf( "No drive specified.\n" );
       return EXIT_FAILURE;
   }

   cdio = open_cd( argv[1] );
   if( !cdio ) {
       return EXIT_FAILURE;
   }

   drive = open_cdda( cdio );
   cdio_cddap_close_no_free_cdio( drive );
   cdio_destroy( cdio );

   return EXIT_SUCCESS;

}

CdIo_t*
open_cd( char const* device )
{

   CdIo_t* cdio = NULL;
   printf( "Trying to open device '%s', using default access
mode.\n", device );

   cdio = cdio_open( device, DRIVER_DEVICE );

   if( !cdio ) {
       printf( "Failed to open device '%s'.\n", device );
   }

   return cdio;

}

cdrom_drive_t*
open_cdda( CdIo_t* cdio )
{
   cdrom_drive_t* drive = cdio_cddap_identify_cdio( cdio, 1, NULL );
   if( !drive ) {
       printf( "Failed to identify drive.\n" );
       return NULL;
   }

   if( cdio_cddap_open( drive ) ) {
       printf( "Unable to open disc.\n" );
       cdio_cddap_close_no_free_cdio( drive );
       return NULL;
   }

   return drive;
}
-----8<   cut here   8<----

Output of sample program on my system:

bash-3.2$ gdb a.out
GNU gdb 6.6
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "i586-pc-linux-gnu"...
Using host libthread_db library "/lib/libthread_db.so.1".
(gdb) r /dev/sr0
Starting program: /home/zappaman/a.out /dev/sr0
Trying to open device '/dev/sr0', using default access mode.
Checking /dev/sr0 for cdrom...
               CDROM sensed:  d7  SCSI CD-ROM

++ WARN: error in ioctl CDROMREADTOCENTRY for track 165: No medium found


Attempting to determine drive endianness from data...
       Cannot determine CDROM drive endianness.

Program received signal SIGSEGV, Segmentation fault.
0xb7e45d27 in free () from /lib/libc.so.6
(gdb) bt
#0  0xb7e45d27 in free () from /lib/libc.so.6
#1  0xb7f21322 in cdtext_destroy () from /usr/lib/libcdio.so.7
#2  0xb7f1f725 in cdio_generic_free () from /usr/lib/libcdio.so.7
#3  0xb7f21900 in cdio_destroy () from /usr/lib/libcdio.so.7
#4  0x080486a1 in main ()
(gdb) q
The program is running.  Exit anyway? (y or n) y
bash-3.2$

Kernel information:

uname -a
Linux linux.cs.buu.ac.th 2.6.21.3 #1 SMP Sun May 27 16:53:53 ICT 2007
i686 pentium4 i386 GNU/Linux
sg is loaded and is modular, the other SCSI stuff for adaptec and hard
disk and cdrom drivers are compiled in.

Hardware:

cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
 Vendor: SEAGATE  Model: ST336706LW       Rev: 010A
 Type:   Direct-Access                    ANSI  SCSI revision: 03
Host: scsi0 Channel: 00 Id: 05 Lun: 00
 Vendor: PLEXTOR  Model: CD-R   PX-W4012S Rev: 1.01
 Type:   CD-ROM                           ANSI  SCSI revision: 02

kernel log output for SCSI at boot time from /var/log/messages:

scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
scsi 0:0:0:0: Direct-Access     SEAGATE  ST336706LW       010A PQ: 0 ANSI: 3
target0:0:0: Beginning Domain Validation
target0:0:0: wide asynchronous
target0:0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 63)
target0:0:0: Domain Validation skipping write tests
target0:0:0: Ending Domain Validation
scsi 0:0:5:0: CD-ROM            PLEXTOR  CD-R   PX-W4012S 1.01 PQ: 0 ANSI: 2
target0:0:5: Beginning Domain Validation
target0:0:5: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15)
target0:0:5: Domain Validation skipping write tests
target0:0:5: Ending Domain Validation
SCSI device sda: 71687370 512-byte hdwr sectors (36704 MB)
sda: Write Protect is off
SCSI device sda: write cache: disabled, read cache: enabled, supports
DPO and FUA
SCSI device sda: 71687370 512-byte hdwr sectors (36704 MB)
sda: Write Protect is off
SCSI device sda: write cache: disabled, read cache: enabled, supports
DPO and FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: Attached scsi disk sda
Uniform CD-ROM driver Revision: 3.20