Re: [Libreboot] T400 woes (2nd try)

[The Gluglug]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Do you have a way to get debugging info from the coreboot log?
(EHCI Debug, spkmodem, etc)

On 01/04/15 21:01, Bella Riosa wrote:
> Hello,
> 
> i tried to flash my T400 today with the latest released version
> (20150208) and the latest snapshot (20150401).
> 
> Unfortunately it wasn't successful. Both versions had the same
> symptoms. The flashing went well, but the new BIOS didn't boot. The
> LCD screen was flickering a little bit on startup and then went
> black (with backlight on). An external Monitor attached to the
> VGA-Port didn't work either, saying some- thing about a wrong
> signal.
> 
> After i reflashed the backup of the original BIOS everything worked
> again.
> 
> i used the following command to flash the rom:
> 
> # flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=512 -V -w \ 
> libreboot_bin/bin/x200_8mb/x200_8mb_usqwerty_vesafb.rom
> 
> BTW, my programmer is a RaspPi.
> 
> After the reflash of the backup i made several logs as suggested by
> fchmmr at IRC (many thanks for the help, btw)
> 
> The original Bios version is 1.2 (7UET50WW) from 2008-10-03 The EC
> version is 1.01 and my CPU is a P8600. I'm using a samsung 2GB
> SODIMM (PC3-8500S-07-10-F2) but tried a faster one from Hynux, too
> (10600S-9-11-B2)
> 
> I hope i didn't forget any critical infos.
> 
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1

iQEcBAEBAgAGBQJVHpnXAAoJEP9Ft0z50c+U/7IH/jrBrOKhBnIbs0xhLdyTzgco
Zvk/kWp1qmEZZG48eJ/joDYOvthquH4h8JfvfZYed+z4/B0rLpT/tVufwBRATIU8
yFjUztYqNA0S7pSDSzUuqxrZ4FB+V5v0VGGOAhl/WfAaFqRirEtk82CoZV5ixUPi
fLjvwbg5dmtk0X+OuIjwGWmkRpesHXRfvptQxoS3Dsa4jKL29BVqYZF5NJzpA/uO
3JHGWCxHWSEQlXLK6GKGd7Qwvz//JGJg+4eV5jZKe5yObqBcdK+h/V/59HFDvZZn
Q47IzkaUDwVzu4Cn1JRXdIUV9+LpJLJtb+k6SqlVs/vFxLjA8ugC5g05AruR4jU=
=yjsk
-----END PGP SIGNATURE-----