libreboot
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Libreboot] Thinkpad x200 with Libreboot 20160818: problem booting f


From: Leah Rowe
Subject: Re: [Libreboot] Thinkpad x200 with Libreboot 20160818: problem booting from USB
Date: Wed, 24 Aug 2016 16:35:36 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Icedove/38.8.0

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

pretty much trial error


Op 23/08/16 om 16:40 schreef Marcel Maci:
> 
> Hi Leah, It worked perfectly with another stick indeed. Is there
> any rule/criteria/list for the sticks that work or is it just trial
> and error ... ? ;-) Thx + greetings, Marcel
> 
>> El 23 ago 2016, a las 9:24, Leah Rowe <address@hidden>
>> escribió:
>> 
> Hi Marcel,
> 
> Op 23/08/16 om 08:20 schreef Marcel Maci:
>>>> 
>>>> Hi all, I get strange behaviour with Libreboot 20160818 on
>>>> Thinkpad x200. When Grub shows up, I select "Boot from usb".
>>>> It then loads the Trisquel menu where I select whatever I
>>>> want (e.g. install, boot from live cd) and I get the error
>>>> message:
>>>> 
>>>> Error: USB mass storage stalled Error: you need to load
>>>> kernel first
>>>> 
>>>> Press any key to continue
>>>> 
>>>> I tried the same with another usb-stick with Tails and it
>>>> booted without any complaint (tried several times). Other
>>>> strange behaviour: sometimes I get a "kernel panic" message
>>>> with the uppercase led blinking and the system stops (this
>>>> can occur with both sticks, but with Tails the message just
>>>> pops up a fraction of a second and then it continues
>>>> booting). Does anybody know what the problem could be? BTW:
>>>> flashing the x200 was very slow (due to bad connection with
>>>> the clip I had to reduce speed to 128 and it took 1.5 hours
>>>> (!) - I also had to specify manually the "MX25L6405D" with
>>>> the -c option), but the content of the flash chip seems to
>>>> be correct (it said VERIFIED in the end). Thx and greetings,
>>>> Marcel
> 
> Can you try another USB drive? Not all drives work reliably in the 
> GRUB payload.
> 
> 

- -- 
Leah Rowe

Libreboot developer

Use free software. Free as in freedom.
https://www.gnu.org/philosophy/free-sw.html

Use a free operating system, GNU/Linux.
https://www.gnu.org/

Use a free BIOS.
https://libreboot.org/

Support freedom. Join the Free Software Foundation.
https://fsf.org/

Minifree Ltd, trading as Ministry of Freedom | Registered in England,
No. 9361826 | VAT No. GB202190462
Registered Office: 19 Hilton Road, Canvey Island, Essex SS8 9QA, UK |
Web: http://minifree.org/

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)

iQEcBAEBAgAGBQJXvb7IAAoJEP9Ft0z50c+UtQsIAIqZBBW3KzgX+vn/OBQSUgXC
AdFtpQuEXJokhYZ55RrplLw83HMvZvPcc4SHj3qi1y0b4vDh6MGmd/pgjEGBUNRZ
gc5U75PSHdAHlOcC2UcDjx3Ce8MyJHyeDo9kGFA+nRyEAOGzpDV2CwidhPKzwyRl
1ejELpVL2xZvW3YSuXxAxMMOqn5VHYfmZ7I6IoH07kGWLF+7+JibNWbTp2ZTtaJG
R+lppbyZMT5dg2M9zxMgsYFTZjYE1BCInRSTBnaDHIZPECUClUnYKjww9chxuVAh
zg5b4iYPFcs4Ue0thbK1vltapIYjg1lSCpyifMpsTlfz9a8RiEYTIhBzxKOCpa4=
=gYeA
-----END PGP SIGNATURE-----



reply via email to

[Prev in Thread] Current Thread [Next in Thread]