ezmlm response

[cygwin-announce-help]

Hi! This is the ezmlm program. I'm managing the
address@hidden mailing list.

Acknowledgment: The address

   address@hidden

was not on the cygwin-announce mailing list when I received
your request and is not a subscriber of this list.

If you unsubscribe, but continue to receive mail, you're subscribed
under a different address than you currently use. Please look at the
header for:

'Return-Path: <address@hidden>'

The unsubscribe address for this user would be:
'address@hidden'.
Just mail to that address, substituting user=host.dom for the real
values, reply to the confirmation request, and you should receive a message
that you're off the list.

For some mail programs, you need to make the headers visible to
see the return path:

For Eudora 4.0, click on the "Blah blah ..." button.
For PMMail, click on "Window->Show entire message/header". 

If this still doesn't work, I'm sorry to say that I can't help you.
Please FORWARD a list message together with a note about what you're
trying to achieve and a list of addresses that you might be subscribed
under to my owner:

    address@hidden

who will take care of it. My owner is a little bit slower than I am, 
so please be patient.


--- Administrative commands for the cygwin-announce list ---

I can handle administrative requests automatically. Please
DO NOT SEND THEM TO THE LIST ADDRESS! If you do, I will not
see them and other subscribers will be annoyed. Instead, send
your message to the correct command address:


To subscribe to the list, send a message to:
   <address@hidden>

To remove your address from the list, send a message to:
   <address@hidden>

To get messages 123 through 145 (a maximum of 100 per request), mail:
   <address@hidden>

To get an index with subject and author for messages 123-456 , mail:
   <address@hidden>

They are always returned as sets of 100, max 2000 per request,
so you'll actually get 100-499.

To receive all messages with the same subject as message 12345,
send an empty message to:
   <address@hidden>

The messages do not really need to be empty, but I will ignore
their content. Only the ADDRESS you send to is important.

You can start a subscription for an alternate address,
for example "address@hidden", just add a hyphen and your
address (with '=' instead of '@') after the command word:
<address@hidden>

To stop subscription for this address, mail:
<address@hidden>

In both cases, I'll send a confirmation message to that address. When
you receive it, simply reply to it to complete your subscription.

If despite following these instructions, you do not get the
desired results, please contact my owner at
address@hidden Please be patient, my owner is a
lot slower than I am ;-)

--- Enclosed is a copy of the request I received.

Return-Path: <address@hidden>
Received: (qmail 27216 invoked from network); 12 Apr 2004 04:02:52 -0000
Received: from unknown (HELO imo-d02.mx.aol.com) (205.188.157.34)
  by sources.redhat.com with SMTP; 12 Apr 2004 04:02:52 -0000
Received: from address@hidden
        by imo-d02.mx.aol.com (mail_out_v37_r1.2.) id s.1d.cfc950c (22682);
        Mon, 12 Apr 2004 00:02:46 -0400 (EDT)
Received: from  netscape.net (mow-d22.webmail.aol.com [205.188.139.163]) by 
air-in04.mx.aol.com (v98.19) with ESMTP id MAILININ43-589a407a14e51db; Mon, 12 
Apr 2004 00:02:45 -0500
Date: Mon, 12 Apr 2004 00:02:45 -0400
From: address@hidden
To: cygwin-announce-uc.1081721159.edfpihddhnjgkfkpnaha-lilypond-user=gnu
        address@hidden
Subject: RE: confirm unsubscribe from address@hidden
MIME-Version: 1.0
Message-ID: <address@hidden>
X-Mailer: Atlas Mailer 2.0
X-AOL-IP: 68.170.48.27
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

address@hidden wrote:

>Hi! This is the ezmlm program. I'm managing the
>address@hidden mailing list.
>
>To confirm that you would like
>
>   address@hidden
>
>removed from the cygwin-announce mailing list, please send an empty reply 
>to this address:
>
>   address@hidden
>
>Usually, this happens when you just hit the "reply" button.
>If this does not work, simply copy the address and paste it into
>the "To:" field of a new message.
>
>I haven't checked whether your address is currently on the mailing list.
>To see what address you used to subscribe, look at the messages you are
>receiving from the mailing list. Each message has your address hidden
>inside its return path; for example, address@hidden receives messages
>with return path: <cygwin-announce-return-<number>address@hidden
>
>Some mail programs are broken and cannot handle long addresses. If you
>cannot reply to this request, instead send a message to
><address@hidden> and put the entire address listed above
>into the "Subject:" line.
>
>
>--- Administrative commands for the cygwin-announce list ---
>
>I can handle administrative requests automatically. Please
>DO NOT SEND THEM TO THE LIST ADDRESS! If you do, I will not
>see them and other subscribers will be annoyed. Instead, send
>your message to the correct command address:
>
>
>To subscribe to the list, send a message to:
>   <address@hidden>
>
>To remove your address from the list, send a message to:
>   <address@hidden>
>
>To get messages 123 through 145 (a maximum of 100 per request), mail:
>   <address@hidden>
>
>To get an index with subject and author for messages 123-456 , mail:
>   <address@hidden>
>
>They are always returned as sets of 100, max 2000 per request,
>so you'll actually get 100-499.
>
>To receive all messages with the same subject as message 12345,
>send an empty message to:
>   <address@hidden>
>
>The messages do not really need to be empty, but I will ignore
>their content. Only the ADDRESS you send to is important.
>
>You can start a subscription for an alternate address,
>for example "address@hidden", just add a hyphen and your
>address (with '=' instead of '@') after the command word:
><address@hidden>
>
>To stop subscription for this address, mail:
><address@hidden>
>
>In both cases, I'll send a confirmation message to that address. When
>you receive it, simply reply to it to complete your subscription.
>
>If despite following these instructions, you do not get the
>desired results, please contact my owner at
>address@hidden Please be patient, my owner is a
>lot slower than I am ;-)
>
>--- Enclosed is a copy of the request I received.
>
>Return-Path: <address@hidden>
>Received: (qmail 24595 invoked from network); 11 Apr 2004 22:05:57 -0000
>Received: from unknown (80.126.34.178)
>  by sources.redhat.com with SMTP; 11 Apr 2004 22:05:57 -0000
>
>
>_______________________________________________
>Lilypond-user mailing list
>address@hidden
>http://mail.gnu.org/mailman/listinfo/lilypond-user
>

__________________________________________________________________
Introducing the New Netscape Internet Service. 
Only $9.95 a month -- Sign up today at http://isp.netscape.com/register

Netscape. Just the Net You Need. 

New! Netscape Toolbar for Internet Explorer
Search from anywhere on the Web and block those annoying pop-ups.
Download now at http://channels.netscape.com/ns/search/install.jsp