lilypond-user
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: rest positioning and multiple vioces, esp. in a piano staff


From: Mats Bengtsson
Subject: Re: rest positioning and multiple vioces, esp. in a piano staff
Date: Fri, 27 Oct 2006 14:41:35 +0200
User-agent: Thunderbird 1.5.0.7 (X11/20060909)

It should be possible to use the \rest command to position the rests manually. I have just sent a bug report, since this doesn't seem to work when you have a
beam over the rest.

  /Mats

Alexander Rose wrote:
Hi,


Am 26.10.2006 um 21:31 schrieb Alexander Rose:

The attached example (lily 2.9.26) should speak for itself. If you have two voices and a rest under a beam, that rest may collide with the other voice. You can resolve this manually with an override, but than you may run into trouble in a piano staff system, because the override always affects both staffs, still if applied for each staff (then the later is dominant).

It works now. I put the notes (explicitly) into four different voices and I ommited the "Staff" in \override Staff.Rest #' ... See attached file.


Alex


------------------------------------------------------------------------

_______________________________________________
lilypond-user mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/lilypond-user

--
=============================================
        Mats Bengtsson
        Signal Processing
        Signals, Sensors and Systems
        Royal Institute of Technology
        SE-100 44  STOCKHOLM
        Sweden
        Phone: (+46) 8 790 8463                         
       Fax:   (+46) 8 790 7260
        Email: address@hidden
        WWW: http://www.s3.kth.se/~mabe
=============================================





reply via email to

[Prev in Thread] Current Thread [Next in Thread]