lilypond-user
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: \breathe X-offset


From: Trevor Daniels
Subject: RE: \breathe X-offset
Date: Tue, 18 Sep 2007 15:37:55 +0100

Mats

Many thanks - this works perfectly!

Could I have discovered this for myself from the
documentation?  space-alist is not mentioned in the 2.10
User Manual, and although space-alist is shown as one of the
standard settings for BreathingSign in the Program Reference
the list shown there mentions neither next-note nor
fixed-space.  OTOH it _does_ say BreathingSign supports the
grob-interface, which says that X-offset is user-settable,
yet it is not.  Or am I misunderstanding something?

Trevor

> -----Original Message-----
> From: Mats Bengtsson [mailto:address@hidden
> Sent: 18 September 2007 09:12
> To: Trevor Daniels
> Cc: address@hidden
> Subject: Re: \breathe X-offset
>
>
> The horizontal position is determined using a
> completely different
> mechanism.
> For example, if you want to move the breathing
> sign further away from the
> next note, you can use
> \override BreathingSign #'space-alist #'next-note
> = #'(fixed-space . 2.5)
>
>    /Mats
>
> Trevor Daniels wrote:
> > Hi
> >
> > I'm having some difficulty adjusting the X position of a
> > breathing sign using X-offset.  According to the program
> > reference the BreathingSign obeys the
> grob-interface, and
> > indeed Y-offset works fine.  But if I replace
> Y-offset with
> > X-offset in the code below it seems to have no
> effect.  Is
> > this a known bug or is there some other reason why this
> > fails?
> >
> > Trevor (D)
> >
> > \version "2.10.20"
> > {
> >  \relative b' {
> >   b2.
> >   \once \override BreathingSign #'X-offset = #-5
> >   %\once \override BreathingSign #'Y-offset = #-5
> >   \breathe
> >   b4
> >  }
> > }
> >
> >
> >
> >
> >
> > _______________________________________________
> > lilypond-user mailing list
> > address@hidden
> > http://lists.gnu.org/mailman/listinfo/lilypond-user
> >
>
> --
> =============================================
>       Mats Bengtsson
>       Signal Processing
>       Signals, Sensors and Systems
>       Royal Institute of Technology
>       SE-100 44  STOCKHOLM
>       Sweden
>       Phone: (+46) 8 790 8463
>         Fax:   (+46) 8 790 7260
>       Email: address@hidden
>       WWW: http://www.s3.kth.se/~mabe
> =============================================
>
>
>







reply via email to

[Prev in Thread] Current Thread [Next in Thread]