[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Linphone-users] Linphone on TI OMAP - Sound issues
From: |
Adam Ward |
Subject: |
Re: [Linphone-users] Linphone on TI OMAP - Sound issues |
Date: |
Mon, 24 Apr 2006 17:52:00 +0000 (GMT) |
Hi,
I was just browsing the mailing list online archive and saw that I had had this
very same problem.
If I recall correctly, I had to create
/root/armbuild/lib/linphone/plugins/mediastreamer and copy all the executables
(i.e. mediastream, mstest, ring_test, test_alaw, test_gsm... etc, though I
suspect only the first is used) from the mediastreamer subdirectory after
building linphone.
I guess there's an ommision in the install process - or we both missed a step?
I'm using 1.2.0 on a PXA270 board by the way.
I wonder if there's a way to make it use /usr/lib/linphone/etc on the device,
instead of being stuck with the build system prefix...
Adam
>Hello,
>
>The cannot open directory warning is not a problem.
>The sound problem may be due to sound driver issue, or codec issue.
>Try with different codecs to investigate.
>
>SImon
>
>Le Lundi 27 Février 2006 11:18, address@hidden a écrit :
>> Hello All
>>
>> I am compiling linphone-1.1.0 for ARM (OMAP1510). I have succeded in
>> compiling without an error. Now when I run the 'linphonec' I am getting
>> the following warning ("Cannot open directory
>> /root/armbuild/lib/linphone/plugins/mediastreamer:
>> No such file or directory"). There after if I make a call the speaker
>> gives just noise, no legible sound. I have observed that the SIP messages
>> are going properly, only some problem with the sound. I have put as an
>> attachment the ouput logfile with linphonec -d 6 option. Below is the
>> screen dump of the warning I am getting while linphone is run.
>>
>> Thanks in advance
>>
>> Prakash
>>
>> linphonec> Message:Found /dev/dsp.
>> Warning:Cannot open directory
>> /root/armbuild/lib/linphone/plugins/mediastreamer: No such file or
>> directory
>> Warning:dsp block size set to 8192.
>> Warning:dsp block size set to 8192.
>> Message:Adding new codec PCMU/8000
>> Message:Adding new codec GSM/8000
>> Messa'Message:Found /dev/dsp.' : Cannot understand this.
>> linphonec> ge:Adding new codec PCMA/8000
>> Message:Adding new codec speex/8000
>> Message:Adding new codec speex/16000
>> Message:Adding new codec 1015/8000
>> Ready.
>>
>> ----------------------------------------------------------------
>> This message was sent using IMP, the Internet Messaging Program.
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Linphone-users] Linphone on TI OMAP - Sound issues,
Adam Ward <=