Hi,
I amusing Linphone on my iPhone 4, last version. If I turn my device on then try to make a call with Linphone, sometimes everything works fine. Sometimes I hear the first second, but then the sound somehow turns off. I've tried to hit the mute button on and off, it didn't do anything.
No matter how the first call is going, the next ones are all without sound. I am on a very good wifi, so I don't think the network should be involved. I indeed see on my device's screen that the signal is very good. my SIP account works fine on my Fedora, so I don't think my SIP provider is somehow involved.
At the end of the mail is the output of the console. there is an audio unit error, but I don't know much about it.
Any ideas/tips ?
Thanks,
Best regards,
Edouard
edI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]bandwidth usage: audio=[d=0.0,u=0.0] video=[d=0.0,u=0.0] kbit/secThread processing load: audio=12.492291 video=0.000000io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]bandwidth usage: audio=[d=0.0,u=0.0] video=[d=0.0,u=0.0] kbit/secThread processing load: audio=13.790056 video=0.000000io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive Packetio unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Could not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060bandwidth usage: audio=[d=0.0,u=0.0] video=[d=0.0,u=0.0] kbit/secio unit initializedThread processing load: audio=11.380020
video=0.000000I/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of
message.io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]bandwidth usage: audio=[d=0.0,u=0.0] video=[d=0.0,u=0.0] kbit/secAudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) Thread processing load: audio=10.765166
video=0.000000IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageio unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]eXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]bandwidth usage: audio=[d=0.0,u=0.0] video=[d=0.0,u=0.0] kbit/secThread processing load: audio=10.217780 video=0.000000io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive Packetio unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Could not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]bandwidth usage: audio=[d=0.0,u=0.0] video=[d=0.0,u=0.0] kbit/secThread processing load: audio=21.914694 video=0.000000io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive Packetio unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Could not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]bandwidth usage: audio=[d=0.0,u=0.0] video=[d=0.0,u=0.0] kbit/secThread processing load: audio=20.474463 video=0.000000io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of
message.io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]bandwidth usage: audio=[d=0.0,u=0.0] video=[d=0.0,u=0.0] kbit/secThread processing load: audio=17.895573 video=0.000000io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive Packetio unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Message received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of
message.io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]bandwidth usage: audio=[d=0.0,u=0.0] video=[d=0.0,u=0.0] kbit/secThread processing load: audio=14.276614
video=0.000000io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]bandwidth usage: audio=[d=0.0,u=0.0] video=[d=0.0,u=0.0] kbit/secThread processing load: audio=14.903146 video=0.000000io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of
message.io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]bandwidth usage: audio=[d=0.0,u=0.0] video=[d=0.0,u=0.0] kbit/secThread processing load: audio=14.642688 video=0.000000io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive Packetio unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Could not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]io unit initializedI/O unit latency [0.000000], quality [64]AudioUnit error for AudioOutputUnitStart: ret=unkown error (-50) IO unit started, current hw output latency [0.000000] input [0.000000] iobuf[0.000000] sample rate [0.000000]Authentication info for username [0952158320], id[0952158320], realm [(null)] added to eXosipINFO: authinfo: "
freephonie.net" INFO: authinfo: "
freephonie.net" allocating transaction ressource 54 734881045allocating NICT contextoRTP-stats:
Audio session's RTP statistics : number of rtp packet sent=0 number of rtp bytes sent=0 bytes number of rtp packet received=0 number of rtp bytes received=0 bytes number of incoming rtp bytes successfully delivered to the application=0 number of rtp packet lost=0 number of rtp packets received too late=0 number of bad formatted rtp packets=0 number of packet discarded because of queue overflow=0ms_filter_unlink: MSAURead:0x695b20,0-->MSResample:0x5d725c0,0ms_filter_unlink: MSResample:0x5d725c0,0-->MSVolume:0x6e8d70,0ms_filter_unlink: MSVolume:0x6e8d70,0-->MSDtmfGen:0x6ef190,0ms_filter_unlink: MSDtmfGen:0x6ef190,0-->MSAlawEnc:0x6e6390,0ms_filter_unlink: MSAlawEnc:0x6e6390,0-->MSRtpSend:0x6f4690,0ms_filter_unlink: MSRtpRecv:0x698d40,0-->MSAlawDec:0x5d5dd50,0ms_filter_unlink: MSAlawDec:0x5d5dd50,0-->MSGenericPLC:0x60b050,0ms_filter_unlink: MSGenericPLC:0x60b050,0-->MSDtmfGen:0x5d6adb0,0ms_filter_unlink: MSDtmfGen:0x5d6adb0,0-->MSVolume:0x5d582c0,0ms_filter_unlink: MSVolume:0x5d582c0,0-->MSEqualizer:0x5d705a0,0ms_filter_unlink: MSEqualizer:0x5d705a0,0-->MSResample:0x6569b0,0ms_filter_unlink: MSResample:0x6569b0,0-->MSAUWrite:0x6d8a70,0Audio MSTicker thread exitingFilter usage statistics:Name
Count
Time/tick (ms)
CPU UsageMSAURead 14284 1.60804 94.2559MSRtpRecv 14284 0.0730986 4.2847MSDtmfGen 28568 0.00584144 0.684771MSRtpSend 14284 0.00738936 0.433129MSGenericPLC 14284 0.00582674 0.341536MSAQWrite 0 0 0MSEqualizer 0 0 0MSResample 0 0 0MSVolume 0 0 0MSAlawDec 0 0 0DNS resolution with 212.27.52.5:5060MSAlawEnc 0 0 0getaddrinfo returned the following addresses:MSFilePlayer 0 0 0MSAUWrite 0 0 0MSSpeexEC 0 0 0Call 0x5d70430: moving from state LinphoneCallStreamsRunning to LinphoneCallEndResetting the current call212.27.52.5 port 5060Message sent: (to dest=
212.27.52.5:5060)
Via: SIP/2.0/UDP 10.249.214.37:1095;rport;branch=z9hG4bK2038930984
Route: <sip:212.27.52.5:5060;transport=udp;lr>
Call-ID: 734881045
CSeq: 22 BYE
Proxy-Authorization: Digest username="0952158320", realm="
freephonie.net", nonce="01ef0d24185bfde77528916e2b8142aa", uri="sip:
172.17.20.241:5062", response="4ae87da5a09a2f4c96a057eafb2d5068", algorithm=MD5, opaque="01ee35e55c8eadf"
Max-Forwards: 70
User-Agent: Linphone/3.5.2 (eXosip2/3.6.0)
Content-Length: 0
Notifying all friends that we are in status 1UI - 'CALL_LARGE button' is now 'SHOWN' ('-[PhoneViewController updateCallAndBackButtons]')UI - 'CALL_SHORT button' is now 'HIDDEN' ('-[PhoneViewController updateCallAndBackButtons]')UI - 'BACK button' is now 'HIDDEN' ('-[PhoneViewController updateCallAndBackButtons]')cb_sndbye (id=54)eXosip: timer sec:0 usec:509945!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:0 usec:488363!UI - 'PAUSE button' is now 'HIDDEN' ('/Users/ydiorcet/Desktop/linphone-iphone/Classes/IncallViewController.m:382')UI - 'MERGE button' is now 'SHOWN' ('/Users/ydiorcet/Desktop/linphone-iphone/Classes/IncallViewController.m:386')Received message:
SIP/2.0 200 OK
Call-ID: 734881045
CSeq: 22 BYE
Record-Route: <sip:212.27.52.5:5060;transport=udp;lr>
Via: SIP/2.0/UDP 10.249.214.37:1095;received=10.249.214.37;rport=1095;branch=z9hG4bK2038930984
Server: Cirpack/v4.42q (gw_sip)
Content-Length: 0
Message received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
SIP/2.0 200 OK
Call-ID: 734881045
CSeq: 22 BYE
Record-Route: <sip:212.27.52.5:5060;transport=udp;lr>
Via: SIP/2.0/UDP 10.249.214.37:1095;received=10.249.214.37;rport=1095;branch=z9hG4bK2038930984
Server: Cirpack/v4.42q (gw_sip)
Content-Length: 0
MESSAGE REC. CALLID:734881045Message received from: 212.27.52.5:5060eXosip_trylock busy.cb_rcv2xx (id=54)eXosip: timer sec:5 usec:10000!linphone process event get a message 20
EXOSIP_CALL_MESSAGE_ANSWERED Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:4 usec:197517!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:3 usec:789448!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:3 usec:585758!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:3 usec:71365!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:3 usec:50367!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:3 usec:30029!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:2 usec:149887!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:1 usec:742249!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:1 usec:639700!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:1 usec:619813!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messagekeep alive: 0eXosip: Keep Alive sent on UDP!eXosip: timer sec:1 usec:120549!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:0 usec:819038!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:0 usec:616375!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:0 usec:411283!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:0 usec:204003!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:0 usec:184056!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:0 usec:136636!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:0 usec:116701!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: timer sec:0 usec:95281!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messagecb_nict_kill_transaction (id=54)eXosip: eXosip_release_finished_calls remove a dialog (cid=11 did=-1)eXosip: remove a callfree transaction ressource 53 734881045free ict ressourceeXosip: Reseting timer to 10s before waking up!eXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!linphone process event get a message 26
CALL_RELEASED
Call 0x5d70430: moving from state LinphoneCallEnd to LinphoneCallReleasedCleaning cid 11Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!Received message:
Cirpack KeepAlive PacketMessage received from: 212.27.52.5:5060Message received from: 212.27.52.5:5060Received message from
212.27.52.5:5060:
Cirpack KeepAlive PacketCould not parse start line of message.could not parse messageeXosip: Reseting timer to 10s before waking up!