[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Ltib] Problem getting started with Microwindows/Nano-X
From: |
Stuart Hughes |
Subject: |
Re: [Ltib] Problem getting started with Microwindows/Nano-X |
Date: |
Sat, 14 Mar 2009 08:40:56 +0000 |
Hi Bob/all
FYI, if you need to reconfigure your kernel the easiest way is:
$ ./ltib -p kernel -c -f
That will drop you to the kernel's config system and on exit
build/install.
Regards, Stuart
On Fri, 2009-03-13 at 09:47 -0700, Matt Waddel wrote:
> Hi Bob,
>
> Which platform are you using? There are a couple m68knommu
> that have displays and there are 4 different display types supported.
> It sounds like the wrong display is selected in the kernel
> configuration. There is a 240Wx320H and if the last 1/3 of your
> 320W x 240H is messed up it may just be a wrong kernel
> configuration.
>
> About the microwindows demos. Most of the the scripts aren't
> really "executable scripts". I've had luck just starting them
> individually. Does the BSP you're using have the nanox.html
> document in <ltib>/Help/software/? There are some suggestions
> there for some of the nanox demos.
>
> Best regards,
> Matt
>
>
> --- On Thu, 3/12/09, Robert S. Grimes <address@hidden> wrote:
>
> > From: Robert S. Grimes <address@hidden>
> > Subject: [Ltib] Problem getting started with Microwindows/Nano-X
> > To: address@hidden
> > Date: Thursday, March 12, 2009, 7:59 PM
> >
> > Hi,
> >
> > So, I'm trying to get version 0.90 running on my embedded
> > target
> > (m68knommu under uClinux). Everything seems to build
> > properly, but
> > that's as far as I can get. I do see a /usr/nanox
> > directory on my
> > target, with several demo scripts and a bin
> > directory. But none of the
> > programs run very well.
> >
> > For example, I try the following from /usr/nanox:
> >
> > ./laucher.sh
> >
> > This results in the following output on my serial
> > terminal:
> >
> > $ ./launcher.sh
> > BIN_FLAT: bad header magic
> > BINFMT_FLAT: bad header magic
> > tsdev (compaq touchscreen emulation) is scheduled
> > for removal.
> > See Documentation/feature-removal-schedule.txt for
> > details.
> > nxclient: retry connect attempt 1
> >
> > and the LCD (320W x 240 H) is interesting: the left 2/3 of
> > the screen
> > show a matrix of eight icon, presumably representing
> > sub-demos (which
> > seem to exist in the /usr/nanox/bin directory), seems a
> > good start.
> > But, the right third of the screen is garbage, and the
> > bottom 2-3 lines
> > are also garbled across the entire width. Seems a
> > configuration
> > problem?
> >
> > I couldn't seem to find anything within LTIB to specify the
> > correct
> > screen configuration for Microwindows, but the framebuffer
> > _seems_
> > correct, and the Penguin logo is displayed on startup.
> >
> > Any ideas?
> >
> > Oh, and is this even an issue for here, or is this solely a
> > Microwindows
> > issue?
> >
> > Thanks!
> > -Bob
> >
> >
> >
> >
> > _______________________________________________
> > LTIB home page: http://bitshrine.org
> >
> > Ltib mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/ltib
> >
>
>
>
>
>
>
> _______________________________________________
> LTIB home page: http://bitshrine.org
>
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib
>
- [Ltib] Problem getting started with Microwindows/Nano-X, Robert S. Grimes, 2009/03/12
- Re: [Ltib] Problem getting started with Microwindows/Nano-X, Matt Waddel, 2009/03/13
- Re: [Ltib] Problem getting started with Microwindows/Nano-X, Robert S. Grimes, 2009/03/18
- Re: [Ltib] Problem getting started with Microwindows/Nano-X, Matt Waddel, 2009/03/18
- Re: [Ltib] Problem getting started with Microwindows/Nano-X, Matt Waddel, 2009/03/19
- Re: [Ltib] Problem getting started with Microwindows/Nano-X, Robert S. Grimes, 2009/03/19