Re: [Ltib] updating u-boot package broke compilation

[Stuart Hughes]

Hi Rupesh,

You need to make sure the spec file that you want to be built for 
u-boot/kernel is in your config/platform/_target_/main.lkc and selected 
in the config/platform/_target_/defconfig file, which you can create by 
copy defconfig.dev to defconfig when you have the configuration you want 
setup.  This is covered in the FAQ: http://ltib.org/documentation-LtibFaq

Regards, Stuart

Rupesh Kumar wrote:
> Hi 
>
> Sorry for the confusion and not including list in my reply.
>
> I want to know about where shall i update the patch information so that 
> when i install my ISO it gets compiled.  I have already included this info 
> in spec file, is there any other place also which i missed ?
>
> Thanks
> Rupesh
>
>
>
>
>
> Stuart Hughes <address@hidden> 
> 09/15/2009 09:49 PM
>
> To
> Rupesh Kumar <address@hidden>
> cc
> "address@hidden" <address@hidden>
> Subject
> Re: [Ltib] updating u-boot package broke compilation
>
>
>
>
>
>
> Hi Rupesh,
>
> Is your question about the compilation error or needing to manually copy 
> when installed from your new ISO image? please be clear and provide 
> relevant information.
>
> Also please keep message on the list.
>
> Regards, Stuart
>
> Rupesh Kumar wrote:
> > Hi Stuart,
> >
> > Thanks for your reply. 
> > I have created patch for kernel also and that works fine. In the same 
> > manner i created patch for u-boot also(which is breaking compilation).
> > As i have told earlier, only different thing for u-boot i did was, i 
> have 
> > updated version of u-boot from 1.1.6 to 1.3.0. 
> > i have updated this info in platform config files, I just want to know 
> is 
> > there any other place also where i should mention about this change?
> >
> > Thanks
> > Rupesh
> >
> >
> >
> >
> > Stuart Hughes <address@hidden> 
> > 09/15/2009 09:29 PM
> >
> > To
> > Rupesh Kumar <address@hidden>
> > cc
> > address@hidden
> > Subject
> > Re: [Ltib] updating u-boot package broke compilation
> >
> >
> >
> >
> >
> >
> > Hi Rupesh,
> >
> > This is really outside the scope of this forum as this is a version of 
> > LTIB is not in Savannah public CVS.
> >
> > However, I'd guess that by whatever means you're making the ISO image, 
> > you not made sure that the new patch/sources are copied into the ISO 
> > pkgs directory.
> >
> > Regards, Stuart
> >
> > Rupesh Kumar wrote:
> > > Hi all,
> > >
> > > I am using MPC8313E_RDB_K26_20070831-LTIB.iso released by freescale for 
>
> > > MPC8313ERDB board. This LTIB comes with u-boot version 1.1.6 which i 
> > > updated to 1.3.0. I made ISO image for updated LTIB. When i tried to 
> > > install ltib & extract u-boot it did not compile & tried to connect to 
> > > internet.
> ///////////////////////////////////////////////////////////////////////////////////////////////////
> > > $ ./ltib -m prep -p u-boot-1.3.0-mpc8313erdb_revc.spec
> > >
> > > Processing platform: Freescale MPC8313E RDB PowerPC board
> > > ===========================================================
> > > using config/platform/mpc8313erdb/.config
> > >
> > > Processing: u-boot-1.3.0-mpc8313erdb_revc
> > > ===========================================
> > > Testing network connectivity
> > > Testing proxy connection for GPP :
> > >
> > >
> > > INT at ./ltib line 2275.
> > > Exiting on error or interrupt
> > > $
> ///////////////////////////////////////////////////////////////////////////////////////////////////
> > > This problem got fixed & it got compiled when i copied new patch for 
> the 
> > > u-boot source i.e.
> > >         $ cp /opt/freescale/pkgs/S600-u-boot-1.3.0-Rev21_1.patch 
> > > rpm/SOURCES/ 
> > >
> > > Can anyone please tell what shall i do so that it gets compiled without 
>
> > me 
> > > coping the above file.
> > >
> > >
> > >
> > > Thanks
> > > Rupesh
> > >
> > >
> > >
> > > _______________________________________________
> > > LTIB home page: http://ltib.org
> > >
> > > Ltib mailing list
> > > address@hidden
> > > http://lists.nongnu.org/mailman/listinfo/ltib