Hi Stuart,
Finally our IT people had unblocked the required ports and i could
checkout the LTIB sources.
Started building it & its seems going smooth.
I hope it worths the wait.
Will come back to you, if in case of any help.
Thanks for ur support.
2009/12/8 Stuart Hughes <address@hidden <mailto:address@hidden>>
Hi Naveen,
I will try to make an upload, but can't give a timescale. So you
should try to use CVS again.
Unless it's blocked at your site you should have no trouble getting
the latest from CVS using the command:
cvs -d:pserver:address@hidden:/sources/ltib co ltib
If that doesn't work ask someone who understands networking to help
you.
Regards, Stuart
Naveen Krishna Ch wrote:
Hi Stuart,
Sorry to bother you,
I asked my IT people to unblock the site
http://cvs.savannah.gnu.org/ with ip 199.232.41.69 as i found
using " ip finder ".
The CVS port i found is 2041 (googled it)
for CVS access they say, they have done everything they should.
I cant take in the sources (As u know some company polocies)
from my home.
Can you please suggest me some thing or up load a tar ball as
you said.
Thanks in Advance.
2009/12/4 Stuart Hughes <address@hidden <mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>>>
Hi Naveen,
Forget ltib-6.2.2-sv it's way too old.
I just tried CVS, it's fine. Are you at a company that
blocks this
port? maybe you need a proxy? If so you'll need to talk to
your IT
department. Failing that you could check-out from a another
location (home) that isn't blocked.
If you can't do this, let me know and I'll try to get a new
tarball
uploaded that you can get to from a browser.
Regards, Stuart
Naveen Krishna Ch wrote:
Hi Stuart,
I was not able to checkout the CVS sources
address@hidden LTIB]$ cvs
-d:pserver:address@hidden:/sources/ltib co ltib
cvs [checkout aborted]: connect to [cvs.sv.gnu.org
<http://cvs.sv.gnu.org/>
<http://cvs.sv.gnu.org/> <http://cvs.sv.gnu.org
<http://cvs.sv.gnu.org/>
<http://cvs.sv.gnu.org/>>]:2401 failed: Connection timed out
I m trying with "ltib-6.2.2-sv" and have the same problem.
Reinstalled all the dependencies. Still it is saying
install/upgrade these packages.
My suspicion is 64bit packages on X86.
Installed:
glibc-devel.x86_64 0:2.11-2 rpm-build.x86_64
0:4.7.1-6.fc12 zlib.i686 0:1.2.3-23.fc12
zlib.x86_64 0:1.2.3-23.fc12
Can you please put some light on this issue.
Thanks.
2009/12/2 Stuart Hughes <address@hidden
<mailto:address@hidden> <mailto:address@hidden <mailto:address@hidden>>
<mailto:address@hidden <mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>>>>
Hi Naveen,
Looking again at your earlier email I see that you're
using
ltib-8-1-2-sv. There have been many changes since then
(including
package detection). You need to get the latest from
CVS and
re-try.
Regards, Stuart
Naveen Krishna Ch wrote:
Hi Stuart,
2009/12/1 Stuart Hughes <address@hidden
<mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>>
<mailto:address@hidden <mailto:address@hidden> <mailto:address@hidden
<mailto:address@hidden>>>
<mailto:address@hidden <mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>>
<mailto:address@hidden <mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>>>>>
Hi Naveen,
You need to install the missing packages (su yum
install ...)
I tried that, the system says they are installed
at are
at their
latest versions.
address@hidden ~]$ sudo yum install glibc-devel
[sudo] password for chnaveen:
Loaded plugins: presto, refresh-packagekit
updates/metalink
| 5.8 kB 00:00
Setting up
Install Process
Package glibc-devel-2.11-2.x86_64 already
installed and
latest
version
Nothing to do
address@hidden ~]$ sudo yum install rpm-build
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Package rpm-build-4.7.1-6.fc12.x86_64 already
installed and
latest version
Nothing to do
address@hidden ~]$
I have 64bit processor and 64Bit Fedora 12, Could
this be
a problem
Am i missing anything,
Regards, Stuart
Naveen Krishna Ch wrote:
Hi Folks,
I brought in a new 64bit PC installed with
Fedora 12
64bit version.
when i do ./ltib The build failed saying
address@hidden Downloads]$ cd
ltib-8-1-2-sv/
address@hidden ltib-8-1-2-sv]$ ls
bin config COPYING CVS dist doc ltib
README
README-tarball.txt
address@hidden ltib-8-1-2-sv]$ ./ltib
ltib cannot be run because one or more of
the host
packages needed
to run it are either missing or out of date.
Please install/upgrade these packages and
then re-try.
Package Minimum ver
Installed info
------- -----------
---------------
glibc-devel 0 not
installed
rpm-build 0 not
installed
Died at ./ltib line 1267.
traceback:
main::host_checks:1267
main:480
Started: Tue Dec 1 16:32:49 2009
Ended: Tue Dec 1 16:32:50 2009
Elapsed: 1 seconds
Build Failed
Exiting on error or interrupt
address@hidden ltib-8-1-2-sv]$
I checked both the glibc and rpm are at their
latest versions
Is it a OS problem or any issue with the
configuration.
What am i missing, Appreciate if someone
could help me
with this.
-- Shine bright,
(: Naveen Krishna Ch :)
------------------------------------------------------------------------
_______________________________________________
LTIB home page: http://ltib.org
<http://ltib.org/> <http://ltib.org/>
Ltib mailing list
address@hidden <mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>>
<mailto:address@hidden <mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>>>
<mailto:address@hidden <mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>>
<mailto:address@hidden <mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>>>>
http://lists.nongnu.org/mailman/listinfo/ltib
-- Shine bright,
(: Naveen Krishna Ch :)
-- Shine bright,
(: Naveen Krishna Ch :)
--
Shine bright,
(: Naveen Krishna Ch :)
--
Shine bright,
(: Naveen Krishna Ch :)