[Ltib] PHP(5.0.4) build success, installation fail, Please help.

[Kevin Li]

Hello Everyone,

I need PHP extension functions. so I did:
1. ./ltib -m prep -p php
2.  cd ..../php-5.0.4 and run ./configure
3. then build it by : ./ltib -m scbuild -p php, it was success.
4. then I tried install it by:  ./ltib -m scinstall -p php

it shows fail by /bin/sh: /home/kevin/lpc3250/ltib-qs/rpm/BUILD/php-5.0.4/sapi/cli/php: cannot execute binary file.

I am using Ubuntu 9.10 with bash.

Any help are welcome!
Thank you.

Kevin




Processing: php
=================
Build path taken because: directory build, build key set,

rpmbuild --dbpath /home/kevin/lpc3250/ltib-qs/rootfs//var/lib/rpm --target arm --define '_unpackaged_files_terminate_build 0' --define '_target_cpu arm' --define '__strip strip' --define '_topdir /home/kevin/lpc3250/ltib-qs/rpm' --define '_prefix /usr' --define '_tmppath /home/kevin/lpc3250/ltib-qs/tmp' --define '_rpmdir /home/kevin/lpc3250/ltib-qs/rpm/RPMS'  --define '_mandir /usr/share/man' --define '_sysconfdir /etc' --define '_localstatedir /var' -bi --short-circuit  /home/kevin/lpc3250/ltib-qs/dist/lfs-5.1/php/php.spec
Building target platforms: arm
Building for target arm
Executing(%install): /bin/sh -e /home/kevin/lpc3250/ltib-qs/tmp/rpm-tmp.75940
+ umask 022
+ cd /home/kevin/lpc3250/ltib-qs/rpm/BUILD
+ cd php-5.0.4
+ rm -rf /home/kevin/lpc3250/ltib-qs/tmp/php
+ mkdir -p /home/kevin/lpc3250/ltib-qs/tmp/php//opt/freescale/rootfs/arm//usr
+ mkdir -p /home/kevin/lpc3250/ltib-qs/tmp/php//opt/freescale/rootfs/arm//usr/modules
+ mkdir -p /home/kevin/lpc3250/ltib-qs/tmp/php//opt/freescale/rootfs/arm//usr/conf
+ mkdir -p /home/kevin/lpc3250/ltib-qs/tmp/php//opt/freescale/rootfs/arm//usr/htdocs
+ cp /home/kevin/lpc3250/ltib-qs/rootfs/usr/conf/httpd.conf /home/kevin/lpc3250/ltib-qs/tmp/php//opt/freescale/rootfs/arm//usr/conf
+ '[' '!' -f ./sapi/cli/php.orig ']'
+ make -j1 install prefix=/home/kevin/lpc3250/ltib-qs/tmp/php//opt/freescale/rootfs/arm//usr
Installing PHP SAPI module:       apache2handler
/home/kevin/lpc3250/ltib-qs/rootfs/usr/bin/../build/instdso.sh SH_LIBTOOL='/home/kevin/lpc3250/ltib-qs/rootfs/usr/build/libtool' libphp5.la /home/kevin/lpc3250/ltib-qs/tmp/php//opt/freescale/rootfs/arm//usr/modules
/home/kevin/lpc3250/ltib-qs/rootfs/usr/build/libtool --mode=install cp libphp5.la /home/kevin/lpc3250/ltib-qs/tmp/php//opt/freescale/rootfs/arm//usr/modules/
cp .libs/libphp5.so /home/kevin/lpc3250/ltib-qs/tmp/php//opt/freescale/rootfs/arm//usr/modules/libphp5.so
cp .libs/libphp5.lai /home/kevin/lpc3250/ltib-qs/tmp/php//opt/freescale/rootfs/arm//usr/modules/libphp5.la
libtool: install: warning: remember to run `libtool --finish /home/kevin/lpc3250/ltib-qs/rpm/BUILD/php-5.0.4/libs'
chmod 755 /home/kevin/lpc3250/ltib-qs/tmp/php//opt/freescale/rootfs/arm//usr/modules/libphp5.so
[activating module `php5' in /home/kevin/lpc3250/ltib-qs/tmp/php//opt/freescale/rootfs/arm//usr/conf/httpd.conf]
Installing PHP CLI binary:        /home/kevin/lpc3250/ltib-qs/tmp/php//opt/freescale/rootfs/arm//usr/bin/
Installing PHP CLI man page:      /home/kevin/lpc3250/ltib-qs/tmp/php//opt/freescale/rootfs/arm//usr/man/man1/
Installing PEAR environment:      /home/kevin/lpc3250/ltib-qs/tmp/php//opt/freescale/rootfs/arm//usr/lib/php/
/bin/sh: /home/kevin/lpc3250/ltib-qs/rpm/BUILD/php-5.0.4/sapi/cli/php: cannot execute binary file
make[1]: *** [install-pear-installer] Error 126
make: *** [install-pear] Error 2
error: Bad exit status from /home/kevin/lpc3250/ltib-qs/tmp/rpm-tmp.75940 (%install)


RPM build errors:
    Bad exit status from /home/kevin/lpc3250/ltib-qs/tmp/rpm-tmp.75940 (%install)
Build time for php: 1 seconds

Failed building php


f_scinstall() returned an error, exiting
traceback:
 main:567

Exiting on error or interrupt