ltib
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Ltib] Ubuntu 11.10 Can't exec "mconf" error


From: address@hidden
Subject: Re: [Ltib] Ubuntu 11.10 Can't exec "mconf" error
Date: Wed, 11 Jan 2012 14:02:12 +0100 (CET)

Hi Stuart,

 

I removed .host_wait_warning files and also all /opt/ltib folder.

Restarted ltib but still the same result:

all host rpm packages are created but only rpm-fs is installed into

/opt/ltib/usr/bin... nothing less nothing more

 

after that

 

i reinstalled my ubuntu 11.10 from scratch,

 

reinstalled ltib from cvs,

added this line at 974: 

 

$cmd .= "--force-debian " if $rpm =~ m/rpm-fs/ && `uname -a` =~ m/ubuntu/i;

 

just after

 

 $cmd .= "--excludedocs $cf->{noscripts} ";

 

launched ./ltib

 

and...

 

still the same result :-(

 

For curiosity, i have installed an OpenSuse 12.1 on a VM 

and tried ltib and there it works.

So what's happening with Ubuntu 11.10 (32 bits) ???  

 

Regards,

 

Michel 

 

 

 

 


Le 11 janvier 2012 à 12:39, Stuart Hughes <address@hidden> a écrit :

> Hi Michel,
>
> I think the first time you ran ltib, before adding the "--force debian"
> it only installed /opt/ltib/usr/bin/rpm.
>
> Can you remove your ~/.host_wait* file and try again and see if it tries
> to install the other host rpms to /opt/ltib
>
> Regards, Stuart
>
> On 11/01/12 10:08, address@hidden wrote:
> >
> > Hi Stuart,
> >
> > /opt/ltib/usr/bin/rpm -qa
> >
> > give only that as result:
> >
> > rpm-fs-4.0.4-1
> >
> > and conf, mconf are not installed into /opt/ltib/usr/bin/
> >
> > i don't understand why rpm did not install others packages...
> >
> > Regards,
> >
> > Michel
> >
> >
> > Le 8 janvier 2012 à 13:03, Stuart Hughes <address@hidden> a écrit :
> >
> > > Hi Michel,
> > >
> > > Looking at the log file you attached (which is too big to get to the
> > > list), your initial install run of ltib is building, but not install
> > the
> > > the rpms, for example, lkc, which provides mconf build the rpm and then
> > > just goes onto building the next one:
> > >
> > > Processing files: lkc-1.4-10
> > > Finding  Provides: (using /opt/ltib/usr/lib/rpm/find-provides)...
> > > Finding  Requires: (using /opt/ltib/usr/lib/rpm/find-requires)...
> > > PreReq: rpmlib(PayloadFilesHavePrefix) <= 4.0-1
> > > rpmlib(CompressedFileNames) <= 3.0.4-1
> > > Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1
> > > rpmlib(CompressedFileNames) <= 3.0.4-1
> > > Requires: libc.so.6 libdl.so.2 libncurses.so.5 libtinfo.so.5
> > > linux-gate.so.1 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1)
> > > libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4)
> > > libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7)
> > > Ecrit: /opt/ltib/usr/src/rpm/RPMS/i686/lkc-1.4-10.i686.rpm
> > > Exécution_de(%clean): /bin/sh -e /home/host/ltib/tmp/rpm-tmp.43073
> > > + umask 022
> > > + cd /opt/ltib/usr/src/rpm/BUILD
> > > + cd lkc-1.4
> > > + rm -rf /home/host/ltib/tmp/lkc
> > > + exit 0
> > > Exécution_de(--clean): /bin/sh -e /home/host/ltib/tmp/rpm-tmp.43073
> > > + umask 022
> > > + cd /opt/ltib/usr/src/rpm/BUILD
> > > + rm -rf lkc-1.4
> > > + exit 0
> > > Build time for lkc: 3 seconds
> > >
> > >
> > >
> > > Processing: patch
> > > ===================
> > > Build path taken because: no prebuilt rpm,
> > > Try patch-2.5.4.tar.gz.md5 from the GPP
> > >
> > >
> > > You should see after the build time, something like this:
> > > sudo /opt/ltib/usr/bin/rpm --root / --dbpath /opt/ltib/var/lib/rpm -e
> > > --allmatches --nodeps --noscripts --define '_tmppath
> > > /data/seh/Src/ltib_bsps/savannah_ltib/tmp' lkc 2>/dev/null
> > > sudo /opt/ltib/usr/bin/rpm --root / --dbpath /opt/ltib/var/lib/rpm
> > > --prefix / --ignorearch -ivh --force --nodeps --excludedocs --noscripts
> > > --define '_tmppath /data/seh/Src/ltib_bsps/savannah_ltib/tmp'
> > > /opt/ltib/usr/src/rpm/RPMS/i686/lkc-1.4-10.i686.rpm
> > > Preparing...                ###########################################
> > > [100%]
> > >    1:lkc                    ###########################################
> > > [100%]
> > >
> > >
> > > Can you run this: /opt/ltib/usr/bin/rpm -qa
> > > that should list the packages that that rpm copy thinks it has
> > > installed, for example:
> > >
> > > /opt/ltib/usr/bin/rpm -q lkc
> > > lkc-1.4-10
> > >
> > > If you do get this output, it means rpm thinks the package is
> > installed.
> > >  In which case, confirm this with:
> > >
> > >
> > > /opt/ltib/usr/bin/rpm -ql lkc
> > > //opt
> > > //opt/ltib
> > > //opt/ltib/usr
> > > //opt/ltib/usr/bin
> > > //opt/ltib/usr/bin/conf
> > > //opt/ltib/usr/bin/mconf
> > >
> > > and then check those files are actually present on the filesystem:
> > > ls -l /opt/ltib/usr/bin/mconf
> > >
> > > Regards, Stuart
> > >
> > >
> > >
> > >
> > >
> > >
> > > On 06/01/12 16:37, address@hidden wrote:
> > > > Hi Peter,
> > > >
> > > >
> > > > All seems correct in file host_config.log .
> > > >
> > > > No Error on rpm construction and install but no files installed into
> > > > /opt/ltib/usr/bin.
> > > >
> > > > Only rpm related files(rpm,rpm2cpio, and links) are there.
> > > >
> > > >
> > > > i joined the host_config.log file
> > > >
> > > >
> > > > Regards,
> > > >
> > > >
> > > > Michel
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > LTIB home page: http://ltib.org
> > > >
> > > > Ltib mailing list
> > > > address@hidden
> > > > https://lists.nongnu.org/mailman/listinfo/ltib
>

reply via email to

[Prev in Thread] Current Thread [Next in Thread]