Hi,
I am a bit new
to the ltib.
I've a custom
LogicPD omap board based on ARM AM3703 with 256
MB ram and NAND 1GB.
My current
bootargs is
nand-ecc=hw
console=ttyO2,115200n8 address@hidden
mpurate=600 i2c_bus=3,100 displ
ay=15
ignore_loglevel early_printk no_console_suspend
mtdparts=omap2-nand.0:512k(x-loader),1664k(u-boot),384k(u-boot-env),5m(kernel),20m(ramdisk),-(fs)
root=/dev/ram rw ramdisk_size=64000
and the mtd
partitions are
mtd0:
00080000 00020000 "x-loader"
mtd1:
001a0000 00020000 "u-boot"
mtd2:
00060000 00020000 "u-boot-env"
mtd3:
00500000 00020000 "kernel"
mtd4:
01400000 00020000 "ramdisk"
mtd5:
1e480000 00020000 "fs"
I am trying
to increase the rootfs partition to be 30mb
and the ramdisk size to 128k as my rootfs is
increased.
When I
changed the bootargs, the board failed to
boot-up and complains about writing beyond.