| Hi Chris,
Not as far as I know, but it should be possible.
Regards, Stuart Thanks Stuart. Do you know if anyone was ever able to get IPSEC working with a Cisco ASA with the implementation in LTIB. I looked back through the message board but I did not find anything. Hi Chris, The reason is that the philosophy was to have the target configuration managed on the host. Standard init scripts could not do that.
Does anyone know why the current configuration of rc and init file organization in LTIB is not really conformant with typical Linux etc directory structure. I am trying to implement a StrongSwan implementation and the instructions from Cisco make reference to /etc/init.d for starting the ipsec service. I upgraded to 5.0.8 of the StrongSwan package but there is no startup script like /etc/rc.d/init.d/ipsec. Senior Product Development Engineer Advantor Systems.
12612 Challenger Pkwy
Suite 300
Orlando, FL
32826 Mobile: (407) 595-7023
Fax: (407) 857-1635
Notice of Confidentiality:
This e-mail communication and the attachments hereto, if any, are intended solely for the information and use of the addressee(s) identified above and may contain information which is legally privileged and/or otherwise confidential. If a recipient of this e-mail communication is not an addressee (or an authorized representative of an addressee), such recipient is hereby advised that any review, disclosure, reproduction, re-transmission or other dissemination or use of this e-mail communication (or any information contained herein) is strictly prohibited. If you are not an addressee and have received this e-mail communication in error, please advise the sender of that circumstance either by reply e-mail or by telephone at (800) 238-2686, immediately delete this e-mail communication from any computer and destroy all physical copies of same.
|