[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [lwip-devel] Query Regarding LWIP Stack

From: Pomeroy, Marty
Subject: Re: [lwip-devel] Query Regarding LWIP Stack
Date: Tue, 28 May 2013 13:38:57 -0400

There is no single answer for this because there are many hardware architectures with orders of magnitude differences in performance, and traffic types with different packet processing demands (many small packets is typically more demanding than fewer large packets).
It's better if you post your expected traffic sizes and types (sending what, receiving what), throughput requirements (Kbytes/sec and packets/sec), and architecture (CPU type and speed).  Someone may have some experience with lwip on that configuration.
In any case, you are not going to find an open source stack that is significantly faster.  Lwip is pretty good.  If your hardware cannot keep up, it is probably not the stack.
FWIW I think this belongs on the lwip-user thread.

From: address@hidden [mailto:address@hidden On Behalf Of praveen ch
Sent: Tuesday, May 28, 2013 7:03 AM
To: address@hidden
Subject: [lwip-devel] Query Regarding LWIP Stack


I am going thru the code for LWIP stack implementation..I would like to know the permormance of the stack for processing 1packet??

Can you please let us know the performance of the stack for both In & Out packet processing?

Please let me know if u need more detals?

praveen chebolu

reply via email to

[Prev in Thread] Current Thread [Next in Thread]