[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [lwip-users] Any sucess in porting lwip-1.3.0-rc1 to at32uc3a?
From: |
Josh Rothstein |
Subject: |
RE: [lwip-users] Any sucess in porting lwip-1.3.0-rc1 to at32uc3a? |
Date: |
Tue, 5 Feb 2008 11:18:34 -0800 |
And the program is stuck at sys_mbox_fetch in tcpip.c, and the last
thing I see at the serial port is a "sys_timeout: ... " debug message.
Did the program initially work with lwIP 1.2? Is the peer responding with
tcp data and the UC3 not handling it? I had a similar problem where I was
transmitting to Hyperterm but was unprepared for its two packet responses.
-josh
-----Original Message-----
From: address@hidden
[mailto:address@hidden On Behalf Of Jakob
Hilmer
Sent: Tuesday, February 05, 2008 4:09 AM
To: lwip-users
Subject: [lwip-users] Any sucess in porting lwip-1.3.0-rc1 to at32uc3a?
Hi,
Anybody having success in porting lwip 1.3.0-rc1 to at32uc3a?
I have the evk1100 eval board. I have tried make a port by follow the
changelog and fixes the compile errors when compiling the control-panel
example application against lwip-1.3.0-rc1.
It was easy to implement the few extra function needed 1.3.0-rc1
sys_mbox_tryfetch and sys_mbox_trypost.
I think my biggest problems is to adjust the different parameters
correct in lwipopts.h - mostly because my very limited understanding of
the lwip and freertos code. Current I use the LED and serial port as
simple debug.
And the program is stuck at sys_mbox_fetch in tcpip.c, and the last
thing I see at the serial port is a "sys_timeout: ... " debug message.
Jakob Hilmer
Software Developer
_______________________________________________
lwip-users mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/lwip-users