On Wed, 2009-08-19 at 08:09 -0700, JM wrote:
> I have lwIP setup with MSS = 1460, and TCP_WND = 2*MSS. As I
> understand it, this means that the transmitter will send lwIP up to
> 2*MSS of data before expecting an ACK from lwIP. In one example, the
> transmitter sends lwIP two consecutive
segments in rapid succession,
> each carrying the full MSS. lwIP quickly ACKs the first segment only.
> The transmitter retransmits the second segment, then lwIP debug output
> complains of recieving a duplicate seqno. Could this be caused by a
> configuration problem, or is it likely something else? I feel like
> I'm finally starting to get a handle on understanding my lwIP issues,
> but don't understand why lwIP was so quick to ACK the first segment
> but not wait for the second, so one ACK could be sent. The trace was
> in another message I posted with the subject "Duplicate sequence
> numbers". Thanks for everyone's help so far.
ACKs are sent for lots of different reasons. Perhaps you could get a
packet capture of this behaviour to illustrate your problem, and knowing
which version of lwIP you're using would be useful too.
The implementation
of delayed ACK in lwIP is not based on the number of
bytes received, but on the number of packets received. It will ACK at
least every other packet (whether they are MSS sized or not) but may
send ACKs more frequently (e.g. for a window update) if it wishes. It
should always send an ACK for a received packet before the other side
retransmits it though, and this is where the packet capture would be
interesting.
Kieran
_______________________________________________
lwip-users mailing list
address@hiddenhttp://lists.nongnu.org/mailman/listinfo/lwip-users
capture.pcap