lwip-users
[
Top
][
All Lists
]
Advanced
[
Date Prev
][
Date Next
][
Thread Prev
][
Thread Next
][
Date Index
][
Thread Index
]
Re: [lwip-users] After tcp_close PCB is still in active pcb in specific
From
:
CHASE CHENG
Subject
:
Re: [lwip-users] After tcp_close PCB is still in active pcb in specific situation.
Date
:
Mon, 13 May 2013 10:53:01 +0800
I found that the connection would be stayed in FIN-WAIT1 state as the link is plugged out, and it seems no way to take the connection out.
Is it make sense to add a judgement in slowtmr to remove the connection from active PCB? otherwise the connection will waste memory space.
regards,
Chase
reply via email to
[Prev in Thread]
Current Thread
[
Next in Thread
]
Re: [lwip-users] After tcp_close PCB is still in active pcb in specific situation.
,
CHASE CHENG
<=
Re: [lwip-users] After tcp_close PCB is still in active pcb inspecific situation.
,
Noam weissman
,
2013/05/13
Prev by Date:
Re: [lwip-users] NETCONN_NOCOPY not sending
Next by Date:
Re: [lwip-users] After tcp_close PCB is still in active pcb inspecific situation.
Previous by thread:
[lwip-users] where should I call tcp_accepted?
Next by thread:
Re: [lwip-users] After tcp_close PCB is still in active pcb inspecific situation.
Index(es):
Date
Thread