lwip-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [lwip-users] blocked udp


From: garibaldi pineda garcia
Subject: Re: [lwip-users] blocked udp
Date: Wed, 28 Sep 2016 13:51:13 +0100

Oooh, I see. Then I believe I have to revisit my code because I based my design on their app note.




Best,
Gary

On 28 September 2016 at 13:41, goldsimon <address@hidden> wrote:

On the contrary: Xilinx does it perfectly right. They use their hardware at interrupt level but feed rx packets into lwip in the main loop.

Simon

Gesendet mit AquaMail für Android
http://www.aqua-mail.com

Am 28. September 2016 2:35:54 nachm. schrieb garibaldi pineda garcia <address@hidden>:

Xilinx application notes seem to contradict the don't-mix interrupt/polling domains:

Creating an lwIP Application Using the RAW API

The lwIP RAW mode API is more complicated as it requires knowledge of lwIP internals. The typical structure of a RAW mode program is as follows:

1. The first step is to initialize all lwIP structures using lwip_init.

2. After lwIP has been initialized, an Ethernet MAC can be added using the xemac_add helper function.

3. Because the Xilinx lwIP adapters are interrupt-based, enable interrupts in the processor and in the interrupt controller.

4. Set up a timer to interrupt at a constant interval. Usually, the interval is around 250 ms. In the timer interrupt, update necessary flags to invoke the lwIP TCP APIs tcp_fasttmr and tcp_slowtmr from the main application loop explained previously.

5. After the application is initialized, the main program enters an infinite loop performing packet receive operation, and any other application specific operation it needs to perform.

6. The packet receive operation (xemacif_input), processes packets received by the interrupt handler, and passes them onto lwIP, which then calls the appropriate callback handlers for each received packet.




Best,
Gary

On 28 September 2016 at 13:20, garibaldi pineda garcia <address@hidden> wrote:
Hi,

Dirk you're right, I'm using LWIP with the NO_SYS flag set to true.

I'm somewhat confused, do I have two options?

1) Do a polling-like application that manages input/output without interrupts (I have no clue how to do this, should I follow the sample code?).

2) Send everything out when I get the ethernet input interrupt

I really don't need any of the data I get from the receiver side of ethernet (other than getting the MAC address), could I skip any checking of that input?




Best,
Gary

On 28 September 2016 at 12:44, Dirk Ziegelmeier <address@hidden> wrote:

A second way to do it, not so preferred by some peoples but worked for me, is to add critical

Sections in code that call’s LwIP functions. Adding a critical section means that you block other

Tasks for a short time. Especially the TCP task from running. It means that if you allocate a buffer from

the LwIP pool until you do not Call exit from the critical section the TCP task will not run and therefore

will not interfere.


Depends on what you mean by "critical section". If this is disable/enable interrupts, that only works if you don't use an OS.

NoSys:
1) Your ethernet MAC interrupt directly calls into lwIP to deliver RX packets in IRQ context​ (this implies all your lwIP callback functions are called in IRQ context). If you call into lwIP from your application code, then yes, all you need to to is disable interrupts. If timers are involved, even more locking code is needed to lock out timer IRQ and ethernet IRQ from each other (assuming these may be nested).

​OS:
​1) Use lwIP core locking. Then you only need to aquire the lwIP core lock using LOCK_TCPIP_CORE() / UNLOCK_TCPIP_CORE()​
​​
​ before calling into lwIP.
​2) Use tcpip_callback() to get called back from TCPIP thread and do the sending work there.​
​In both OS cases, take care of ethernet RX, you need to use tcpip_input() as input function in netif_add() to make RX thread-safe.​​

​Dirk

_______________________________________________
lwip-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/lwip-users


_______________________________________________
lwip-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/lwip-users

_______________________________________________
lwip-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/lwip-users


reply via email to

[Prev in Thread] Current Thread [Next in Thread]