Greetings,
I have a server application using lwIP 1.4.1. When I use a Python program
to connect to my server, the server always terminates the TCP connection
with a RST instead of a FIN packet. The RST appears to be negatively
impacting the performance of my communications. I have attached a Wireshark
capture of the traffic in the attached file lwIP141.pcapng. In this file my
server is at address 192.168.0.175.
I previously implemented a server using the lwIP 1.2.0 library (about a
decade ago), and did not encounter this problem. The attached file
lwip120.pcapng is a Wireshark capture of the same Python program
communicating with the old lwIP 1.2.0 server. In this file my server is at
address 192.168.0.175. Using lwIP 1.2.0 the TCP connection terminates
normally with a FIN, FIN+ACK, ACK set.
Does anyone have any insight into why the RST is being issued? Is there
anything I can do to eliminate this problem? I look forward to your reply.
Regards,
Roger W. Cover
Spectral Instruments, Inc.
420 N. Bonita Ave.
Tucson, AZ 85745
520-884-8821 ext. 144
----------
_______________________________________________
lwip-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/lwip-users