[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Problems : start action status is always "failed to start" when chec
From: |
kenichi.futatsumori |
Subject: |
RE: Problems : start action status is always "failed to start" when check process with matching |
Date: |
Thu, 10 Mar 2011 18:25:37 +0900 |
Hello,
> you can test the pattern with processes using the new
> command-line option "procmatch" which was added in monit
> 5.2.4 (available for download here:
>
I know this new function.
Using "monit procmatch", My process'name is matching !
My process'name, "a" is actual "jajs_spmd".
conf)
check process jajs_spmd matching "/opt/jp1ajs2/bin/jajs_spmd"
.....
result)
# monit procmatch /opt/jp1ajs2/bin/jajs_spmd
List of processes matching pattern "/opt/jp1ajs2/bin/jajs_spmd":
------------------------------------------
/opt/jp1ajs2/bin/jajs_spmd
------------------------------------------
Total matches: 1
But start action or restart action is always "failed to start".
Thanks,
Kenichi Futatsumori in Japan.
> -----Original Message-----
> From:
> address@hidden
> org
> [mailto:monit-general-bounces+kenichi.futatsumori=unisys.co.jp
> @nongnu.org] On Behalf Of Martin Pala
> Sent: Wednesday, March 09, 2011 5:11 AM
> To: This is the general mailing list for monit
> Subject: Re: Problems : start action status is always "failed
> to start" when check process with matching
>
> Hello,
>
> you can test the pattern with processes using the new
> command-line option "procmatch" which was added in monit
> 5.2.4 (available for download here:
> http://www.mmonit.com/monit/download/)
>
> Example:
> monit procmatch aaa
>
> ... will list all processes matching your pattern
>
> Please try to verify that your pattern returns what is expected.
>
> Regards,
> Martin
>
>
> On Mar 8, 2011, at 4:05 AM,
> <address@hidden>
> <address@hidden> wrote:
>
> > I added "with timeout" parameter, but no changes.
> > My process "a" is up within 10 sec.
> > Maybe nothing to relate timeout and this problem in my case.
> >
> >
> > Watching monit.log, I found debug entry. What's happen ?
> >
> > [JST Mar 8 11:54:57] info : start service 'a' on user request
> > [JST Mar 8 11:54:57] info : monit daemon at 1360 awakened
> > [JST Mar 8 11:54:57] info : Awakened by User defined signal 1
> > [JST Mar 8 11:54:57] info : 'a' start: /sbin/service
> > [JST Mar 8 11:55:27] error : 'a' failed to start
> > [JST Mar 8 11:55:27] debug :
> --------------------------------------------------------------
> -----------------
> > [JST Mar 8 11:55:27] debug : /usr/bin/monit [0x8053cce]
> > [JST Mar 8 11:55:27] debug :
> /usr/bin/monit(LogError+0x22) [0x8054092]
> > [JST Mar 8 11:55:27] debug :
> /usr/bin/monit(Event_post+0x382) [0x80517f2]
> > [JST Mar 8 11:55:27] debug : /usr/bin/monit [0x804f718]
> > [JST Mar 8 11:55:27] debug :
> /usr/bin/monit(control_service+0xbb) [0x804f90b]
> > [JST Mar 8 11:55:27] debug : /usr/bin/monit [0x8064368]
> > [JST Mar 8 11:55:27] debug :
> /usr/bin/monit(validate+0x78) [0x8064448]
> > [JST Mar 8 11:55:27] debug : /usr/bin/monit [0x8056005]
> > [JST Mar 8 11:55:27] debug :
> /usr/bin/monit(main+0x524) [0x80568c4]
> > [JST Mar 8 11:55:27] debug :
> /lib/i686/nosegneg/libc.so.6(__libc_start_main+0xdc) [0x190e8c]
> > [JST Mar 8 11:55:27] debug : /usr/bin/monit [0x804e8e1]
> > [JST Mar 8 11:55:27] debug :
> --------------------------------------------------------------
> -----------------
> > [JST Mar 8 11:55:27] debug : Execution failed
> notification is sent to address@hidden<--sorry,confidential
> > [JST Mar 8 11:55:27] debug : Monitoring enabled -- service a
> >
> >
> >
> > Thanks.
> > Kenichi Futatsumori in Japan.
> >
> >
> >
> >> -----Original Message-----
> >> From:
> >> address@hidden
> >> org
> >> [mailto:monit-general-bounces+kenichi.futatsumori=unisys.co.jp
> >> @nongnu.org] On Behalf Of Patrick Viola
> >> Sent: Friday, March 04, 2011 8:25 PM
> >> To: This is the general mailing list for monit
> >> Subject: Antwort: Problems : start action status is always
> "failed to
> >> start" when check process with matching
> >>
> >> I have had the same problem with two of my processes. I get rid of
> >> the messages with a timeout.
> >>
> >> May your process needs some time to stop or start?
> >> Try to add a timeout behind your stop / start command.
> >>
> >> start program = "/sbin/service aaa start" with timeout 20 seconds
> >>
> >>
> >>
> >> Mit freundlichen Grüßen
> >> Patrick Viola
> >> Projektentwicklung Business Information
> >>
> >> Tel: +49 2152 143 - 439, Fax: +49 2152 44 47
> >> E-Mail: address@hidden, Lotus Notes: Patrick address@hidden
> >>
> >> GEDAK - Gesellschaft für Datenverarbeitung und Kommunikation mbH
> >> Mülhauser Str. 157 · D-47906 Kempen, Geschäftsführer:
> >> Bernd Kothes Amtsgericht Krefeld HRB 9087, Steuer-Nr.
> >> 115/5715/0137, USt.-ID DE119998337
> >>
> >> www.gedak.de
> >>
> >>
> >>
> >> Von: <address@hidden>
> >> An: <address@hidden>
> >> Datum: 04.03.2011 08:08
> >> Betreff: Problems : start action status is always
> >> "failed to start" when check process with matching
> >> Gesendet von: address@hidden
> >>
> >> ________________________________
> >>
> >>
> >>
> >>
> >> Hi,
> >>
> >> I am trying to use monit for monitoring a process.
> >> A process doesn't create pid file, so I would like to use
> matching
> >> option.
> >> (monit is version 5.2.4 on linux.)
> >>
> >> check process aaa with matching "aaa"
> >> start = "/sbin/service aaa start"
> >> stop = "/sbin/service aaa stop"
> >>
> >>
> >> # monit start aaa
> >>
> >> The process "aaa" is running but monit's service status
> is always
> >> "Execution failed",
> >> and I recieved a mail. And "failed to start" was put syslog.
> >>
> >> And "monit procmatch" is OK.
> >>
> >> Why ?
> >>
> >> # monit status
> >> ....
> >> Process 'aaa'
> >> status Execution failed
> >> monitoring status monitored
> >> pid 15376 <--- but process
> >> is running !
> >> parent pid 1
> >> uptime 1m
> >> children 17
> >> memory kilobytes 2232
> >> memory kilobytes total 68428
> >> memory percent 0.1%
> >> memory percent total 3.2%
> >> cpu percent 0.0%
> >> cpu percent total 0.0%
> >> data collected Fri Mar 1 16:02:33 2011
> >>
> >>
> >> Thanks.
> >>
> >> Kenichi in Japan.
> >>
> >>
> >> --
> >> To unsubscribe:
> >> http://lists.nongnu.org/mailman/listinfo/monit-general
> >> <http://lists.nongnu.org/mailman/listinfo/monit-general>
> >>
> >>
> >>
> > --
> > To unsubscribe:
> > http://lists.nongnu.org/mailman/listinfo/monit-general
>
>
> --
> To unsubscribe:
> http://lists.nongnu.org/mailman/listinfo/monit-general
>
- Problems : start action status is always "failed to start" when check process with matching, kenichi.futatsumori, 2011/03/04
- Re: Problems : start action status is always "failed to start" when check process with matching, James A R Brown, 2011/03/04
- Antwort: Problems : start action status is always "failed to start" when check process with matching, Patrick Viola, 2011/03/04
- RE: Problems : start action status is always "failed to start" when check process with matching, kenichi.futatsumori, 2011/03/07
- Re: Problems : start action status is always "failed to start" when check process with matching, Martin Pala, 2011/03/08
- Re: Problems : start action status is always "failed to start" when check process with matching, Mike Schmidt, 2011/03/08
- RE: Problems : start action status is always "failed to start" when check process with matching,
kenichi.futatsumori <=
- Re: Problems : start action status is always "failed to start" when check process with matching, Jan-Henrik Haukeland, 2011/03/10
- RE: Problems : start action status is always "failed to start" when check process with matching, kenichi.futatsumori, 2011/03/17
- Re: Problems : start action status is always "failed to start" when check process with matching, Martin Pala, 2011/03/18
- Re: Problems : start action status is always "failed to start" when check process with matching, Martin Pala, 2011/03/21
- RE: Problems : start action status is always "failed to start" when check process with matching, kenichi.futatsumori, 2011/03/21