|
From: | Morgan Thunder |
Subject: | Re: monit & m/monit on the same machine |
Date: | Sat, 22 Jun 2013 20:25:58 +0200 |
Hello,the use of Monit and M/Monit on the same machine is possible - each application uses by default different port (Monit 2812, M/Monit 8080).The problem will be most probably caused by the "allow" option settings in your monit configuration file - it should allow the access from M/Monit host, if you need also access it directly from other machines, they (or their network) should be listed as well.The simplest setup is to not use "allow <IP address>" option (i.e. allow access from any host) - try to use just "allow username:password" to protect the access (i.e. username and password based).M/Monit requires Monit >= 5.2 ... there are pre-build binaries which you can use for upgrade or you can compile monit from source code.Regards,Martin
On Jun 21, 2013, at 6:45 PM, Morgan Thunder <address@hidden> wrote:--Hello i'm student and have a project for a professional.
i've installed monit on a VM with debian 5, 6, 7 which are on ESXi server.the web interface are accessible on the different VMbut i would like to use M/Monit on debian 7 VM and if i make this, the web interface of monit (https://192.168.3.11:2812) isn't accessibleif i configure correctly this VM, M/monit check correctly Monit on the same machine but the web interface of monit isnt accessible.is it possible to use m/monit & monit on the same machine ?and m/monit is capable to check monit(5.1.1) on debian 6 and monit(4.10.1) on debian 5 ?
bets regardsthanksĀsorry for my english , i'm french :D
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general
--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general
[Prev in Thread] | Current Thread | [Next in Thread] |