[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[myserver-commit] [SCM] GNU MyServer branch, master, updated. 2b2688341a
|
From: |
Giuseppe Scrivano |
|
Subject: |
[myserver-commit] [SCM] GNU MyServer branch, master, updated. 2b2688341a4c6138b6ee3856b2456e95818505db |
|
Date: |
Fri, 21 Aug 2009 16:27:49 +0000 |
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU MyServer".
The branch, master has been updated
via 2b2688341a4c6138b6ee3856b2456e95818505db (commit)
via f42d766aca5c956573d6b9ec186e0bf4b6ef8d24 (commit)
from 84ecf068391d3b5468d8bad2e3772cd77392e6d7 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 2b2688341a4c6138b6ee3856b2456e95818505db
Author: Giuseppe Scrivano <address@hidden>
Date: Fri Aug 21 18:23:56 2009 +0200
Update build-system
diff --git a/myserver/INSTALL b/myserver/INSTALL
index 8fe942d..2550dab 100644
--- a/myserver/INSTALL
+++ b/myserver/INSTALL
@@ -1,50 +1,302 @@
- GNU MyServer
+Installation Instructions
+*************************
-Copyright (C) 2002-2009 Free Software Foundation, Inc.
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006, 2007, 2008, 2009 Free Software Foundation, Inc.
-This file contains generic information describing how build and
-install MyServer, please refer to your operating system manual for
-more detailed information about how source packages should be
-installed.
+ This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
-BULD MYSERVER FROM SOURCE CODE
+Basic Installation
+==================
-MyServer can be compiled from its source code using the `configure'
-shell script which attempts to guess the correct configuration for
-various system dependent variables.
+ Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
-After the configure script has checked if MyServer can be compiled on
-your system and have setted some variables, you can build it using the
-`make' utility.
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
-To compile MyServer from source code then you will need:
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
- 1. `cd' to the directory where the source code is contained.
- 2. ./configure
- 3. make
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
-It is possible to install the obtained binaries invoking:
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
-make install
+The simplest way to compile this package is:
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system.
-EXTERNAL DEPENDENCIES
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
-In order to build MyServer you will need the following external
-libraries:
+ 2. Type `make' to compile the package.
-- libxml2
-- GNU libidn
-- GNU tls
-- libevent
-- libz
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package.
-Be sure to have all of them before build MyServer.
+ 4. Type `make install' to install the programs and any data files and
+ documentation.
+ 5. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
-BINARIES
+ 6. Often, you can also type `make uninstall' to remove the installed
+ files again.
-It may be possible to find precompiled binaries for your platform
-here:
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you can use GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+ By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
+ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+ On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'. It is recommended to use the following options:
+
+ ./configure --prefix=/boot/common
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS
+ KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+ Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--prefix=DIR'
+ Use DIR as the installation prefix. *Note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
-http://savannah.gnu.org/projects/myserver/
diff --git a/myserver/Makefile.am b/myserver/Makefile.am
index f7579dd..8b80a2e 100644
--- a/myserver/Makefile.am
+++ b/myserver/Makefile.am
@@ -7,18 +7,12 @@ if BUILD_DOC
DOCS = documentation
endif
-am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-pthread-check.m4 \
- $(top_srcdir)/m4/libtool.m4 \
- $(top_srcdir)/m4/libxml.m4 $(top_srcdir)/m4/cppunit.m4 \
- $(top_srcdir)/configure.in
-
SUBDIRS = po src include $(CONTROL) $(CGI_LIB) binaries $(DOCS) $(TESTS_DIR)
-EXTRA_DIST = stdafx.h stdafx.cpp doxygen SConstruct
+EXTRA_DIST = config.rpath stdafx.h stdafx.cpp doxygen SConstruct
ACLOCAL_AMFLAGS = -I m4
-
localedir.h: Makefile
echo '/* This file is auto-generated by Makefile! */' >$@
echo '#define LOCALEDIR "$(localedir)"' >> $@
diff --git a/myserver/autogen.sh b/myserver/autogen.sh
index 59e71e9..72d0902 100755
--- a/myserver/autogen.sh
+++ b/myserver/autogen.sh
@@ -3,7 +3,7 @@
#
# http://www.myserverproject.net
#
-# Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation,
Inc.
+# Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007, 2009 Free Software
Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
@@ -18,42 +18,7 @@
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-(aclocal --version) < /dev/null > /dev/null 2>&1 ||
-{
- echo;
- echo "You will need aclocal to compile MyServer";
- echo;
- exit;
-}
-
-(autoheader --version) < /dev/null > /dev/null 2>&1 ||
-{
- echo;
- echo "You will need autoheader to compile MyServer";
- echo;
- exit;
-}
-
-(automake --version) < /dev/null > /dev/null 2>&1 ||
-{
- echo;
- echo "You will need automake to compile MyServer";
- echo;
- exit;
-}
-
-(autoconf --version) < /dev/null > /dev/null 2>&1 ||
-{
- echo;
- echo "You will need autoconf to compile MyServer";
- echo;
- exit;
-}
-
echo "Creating configuration files for MyServer. Please wait..."
echo;
-aclocal -I m4
-autoheader
-automake -a
-autoconf
+autoreconf -fis
diff --git a/myserver/binaries/Makefile.am b/myserver/binaries/Makefile.am
index 7e15cc3..c4982b5 100644
--- a/myserver/binaries/Makefile.am
+++ b/myserver/binaries/Makefile.am
@@ -3,7 +3,7 @@ SUBDIRS = logs system web certificates plugins
EXTRA_DIST = myserver-daemon MIMEtypes.default.xml myserver.default.xml \
virtualhosts.default.xml
-configdir = $(DESTDIR)/etc/myserver
+configdir = $(DESTDIR)$(prefix)/etc/myserver
install: install-recursive
$(install_sh_DATA) MIMEtypes.default.xml $(configdir)/MIMEtypes.xml
diff --git a/myserver/binaries/certificates/Makefile.am
b/myserver/binaries/certificates/Makefile.am
index 69501f5..52cbebc 100644
--- a/myserver/binaries/certificates/Makefile.am
+++ b/myserver/binaries/certificates/Makefile.am
@@ -1,4 +1,4 @@
EXTRA_DIST = how_create_certificates.txt
install :
- $(INSTALL) -d '$(DESTDIR)/etc/myserver/certificates'
- $(INSTALL) 'how_create_certificates.txt'
'$(DESTDIR)/etc/myserver/certificates/how_create_certificates.txt'
+ $(INSTALL) -d '$(DESTDIR)$(prefix)/etc/myserver/certificates'
+ $(INSTALL) 'how_create_certificates.txt'
'$(DESTDIR)$(prefix)/etc/myserver/certificates/how_create_certificates.txt'
diff --git a/myserver/binaries/logs/Makefile.am
b/myserver/binaries/logs/Makefile.am
index 1bc56a5..59d9fef 100644
--- a/myserver/binaries/logs/Makefile.am
+++ b/myserver/binaries/logs/Makefile.am
@@ -1,2 +1,2 @@
install :
- $(INSTALL) -d $(DESTDIR)/var/log/myserver
+ $(INSTALL) -d $(DESTDIR)$(prefix)/var/log/myserver
diff --git a/myserver/binaries/web/Makefile.am
b/myserver/binaries/web/Makefile.am
index 0e36859..2ed3505 100644
--- a/myserver/binaries/web/Makefile.am
+++ b/myserver/binaries/web/Makefile.am
@@ -4,6 +4,6 @@ endif
SUBDIRS = cgi-bin $(CGI_SRC)
-myserverdatadir = $(DESTDIR)/var/web
+myserverdatadir = $(prefix)/var/web
dist_myserverdata_DATA = logo.png goto.png default.html link.html
diff --git a/myserver/binaries/web/cgi-bin/Makefile.am
b/myserver/binaries/web/cgi-bin/Makefile.am
index 9eca560..4d1e64e 100644
--- a/myserver/binaries/web/cgi-bin/Makefile.am
+++ b/myserver/binaries/web/cgi-bin/Makefile.am
@@ -1,4 +1,3 @@
-myserverdatadir = $(DESTDIR)/var/web/cgi-bin
+myserverdatadir = $(prefix)/var/web/cgi-bin
dist_myserverdata_DATA = counter.html default.html counter.readme
-
diff --git a/myserver/binaries/web/cgi-src/math_sum/Makefile.am
b/myserver/binaries/web/cgi-src/math_sum/Makefile.am
index bc8f1a6..7213004 100644
--- a/myserver/binaries/web/cgi-src/math_sum/Makefile.am
+++ b/myserver/binaries/web/cgi-src/math_sum/Makefile.am
@@ -12,9 +12,9 @@ math_sum.mscgi : $(libmath_sum_a_OBJECTS)
$(libmath_sum_a_DEPENDENCIES)
$(CXX) $(libmath_sum_a_OBJECTS) ../../../../src/libmyserver.a
$(libmath_sum_a_LIBADD) $(PTHREAD_LIB) $(IDN_LIB) $(XNET_LIB) $(EVENT_LIB)
$(DL_LIB) $(SSL_LIB) $(ZLIB_LIB) $(XML_LIBS) $(LDFLAGS) -o math_sum.mscgi
-shared $(CXXFLAGS) $(XML_CFLAGS)
install : math_sum.mscgi
- $(INSTALL) -D 'math_sum.mscgi'
'$(DESTDIR)/var/web/cgi-bin/math_sum.mscgi'
+ $(INSTALL) -D 'math_sum.mscgi'
'$(DESTDIR)$(prefix)/var/web/cgi-bin/math_sum.mscgi'
-clean :
+clean-local:
rm -f math_sum.mscgi
rm -f *.o
diff --git a/myserver/binaries/web/cgi-src/post/Makefile.am
b/myserver/binaries/web/cgi-src/post/Makefile.am
index 301c2f8..4529ae3 100644
--- a/myserver/binaries/web/cgi-src/post/Makefile.am
+++ b/myserver/binaries/web/cgi-src/post/Makefile.am
@@ -13,8 +13,8 @@ post.mscgi : $(libpost_a_OBJECTS) $(libpost_a_DEPENDENCIES)
$(CXX) $(libpost_a_OBJECTS) ../../../../src/libmyserver.a
$(libpost_a_LIBADD) $(PTHREAD_LIB) $(IDN_LIB) $(XNET_LIB) $(EVENT_LIB)
$(DL_LIB) $(SSL_LIB) $(ZLIB_LIB) $(XML_LIBS) $(LDFLAGS) -o post.mscgi -shared
$(CXXFLAGS) $(XML_CFLAGS)
install : post.mscgi
- $(INSTALL) -D 'post.mscgi' '$(DESTDIR)/var/web/cgi-bin/post.mscgi'
+ $(INSTALL) -D 'post.mscgi'
'$(DESTDIR)$(prefix)/var/web/cgi-bin/post.mscgi'
-clean :
+clean-local:
rm -f post.mscgi
rm -f *.o
diff --git a/myserver/config.guess b/myserver/config.guess
deleted file mode 100755
index 278f9e9..0000000
--- a/myserver/config.guess
+++ /dev/null
@@ -1,1516 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
-# Inc.
-
-timestamp='2007-07-22'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner <address@hidden>.
-# Please send patches to <address@hidden>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <address@hidden>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit ;;
- --version | -v )
- echo "$version" ; exit ;;
- --help | --h* | -h )
- echo "$usage"; exit ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help" >&2
- exit 1 ;;
- * )
- break ;;
- esac
-done
-
-if test $# != 0; then
- echo "$me: too many arguments$help" >&2
- exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) &&
exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15
;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n
"$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp)
; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating
insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; }
;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int x;" > $dummy.c ;
- for c in cc gcc c89 c99 ; do
- if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
- CC_FOR_BUILD="$c"; break ;
- fi ;
- done ;
- if test x"$CC_FOR_BUILD" = x ; then
- CC_FOR_BUILD=no_compiler_found ;
- fi
- ;;
- ,,*) CC_FOR_BUILD=$CC ;;
- ,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac ; set_cc_for_build= ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (address@hidden 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
- PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- *:NetBSD:*:*)
- # NetBSD (nbsd) targets should (where applicable) match one or
- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
- # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
- # switched to ELF, *-*-netbsd* would select the old
- # object file format. This provides both forward
- # compatibility and a consistent mechanism for selecting the
- # object file format.
- #
- # Note: NetBSD doesn't particularly care about the vendor
- # portion of the name. We always set it to "unknown".
- sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
- case "${UNAME_MACHINE_ARCH}" in
- armeb) machine=armeb-unknown ;;
- arm*) machine=arm-unknown ;;
- sh3el) machine=shl-unknown ;;
- sh3eb) machine=sh-unknown ;;
- sh5el) machine=sh5le-unknown ;;
- *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
- esac
- # The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
- case "${UNAME_MACHINE_ARCH}" in
- arm*|i386|m68k|ns32k|sh3*|sparc|vax)
- eval $set_cc_for_build
- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep __ELF__ >/dev/null
- then
- # Once all utilities can be ECOFF (netbsdecoff) or a.out
(netbsdaout).
- # Return netbsd for either. FIX?
- os=netbsd
- else
- os=netbsdelf
- fi
- ;;
- *)
- os=netbsd
- ;;
- esac
- # The OS release
- # Debian GNU/NetBSD machines have a different userland, and
- # thus, need a distinct triplet. However, they do not need
- # kernel version information, so it can be replaced with a
- # suitable tag, in the style of linux-gnu.
- case "${UNAME_VERSION}" in
- Debian*)
- release='-gnu'
- ;;
- *)
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- ;;
- esac
- # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
- # contains redundant information, the shorter form:
- # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
- exit ;;
- *:OpenBSD:*:*)
- UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
- echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
- exit ;;
- *:ekkoBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
- exit ;;
- *:SolidBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
- exit ;;
- macppc:MirBSD:*:*)
- echo powerpc-unknown-mirbsd${UNAME_RELEASE}
- exit ;;
- *:MirBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
- exit ;;
- alpha:OSF1:*:*)
- case $UNAME_RELEASE in
- *4.0)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- ;;
- *5.*)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
- ;;
- esac
- # According to Compaq, /usr/sbin/psrinfo has been available on
- # OSF/1 and Tru64 systems produced since 1995. I hope that
- # covers most systems running today. This code pipes the CPU
- # types through head -n 1, so we only detect the type of CPU 0.
- ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\)
processor.*$/\1/p' | head -n 1`
- case "$ALPHA_CPU_TYPE" in
- "EV4 (21064)")
- UNAME_MACHINE="alpha" ;;
- "EV4.5 (21064)")
- UNAME_MACHINE="alpha" ;;
- "LCA4 (21066/21068)")
- UNAME_MACHINE="alpha" ;;
- "EV5 (21164)")
- UNAME_MACHINE="alphaev5" ;;
- "EV5.6 (21164A)")
- UNAME_MACHINE="alphaev56" ;;
- "EV5.6 (21164PC)")
- UNAME_MACHINE="alphapca56" ;;
- "EV5.7 (21164PC)")
- UNAME_MACHINE="alphapca57" ;;
- "EV6 (21264)")
- UNAME_MACHINE="alphaev6" ;;
- "EV6.7 (21264A)")
- UNAME_MACHINE="alphaev67" ;;
- "EV6.8CB (21264C)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8AL (21264B)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8CX (21264D)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.9A (21264/EV69A)")
- UNAME_MACHINE="alphaev69" ;;
- "EV7 (21364)")
- UNAME_MACHINE="alphaev7" ;;
- "EV7.9 (21364A)")
- UNAME_MACHINE="alphaev79" ;;
- esac
- # A Pn.n version is a patched version.
- # A Vn.n version is a released version.
- # A Tn.n version is a released field test version.
- # A Xn.n version is an unreleased experimental baselevel.
- # 1.2 uses "1.2" for uname -r.
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e
's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit ;;
- Alpha\ *:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # Should we change UNAME_MACHINE based on the output of uname instead
- # of the specific Alpha model?
- echo alpha-pc-interix
- exit ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit ;;
- Amiga*:UNIX_System_V:4.0:*)
- echo m68k-unknown-sysv4
- exit ;;
- *:[Aa]miga[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-amigaos
- exit ;;
- *:[Mm]orph[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-morphos
- exit ;;
- *:OS/390:*:*)
- echo i370-ibm-openedition
- exit ;;
- *:z/VM:*:*)
- echo s390-ibm-zvmoe
- exit ;;
- *:OS400:*:*)
- echo powerpc-ibm-os400
- exit ;;
- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
- exit ;;
- arm:riscos:*:*|arm:RISCOS:*:*)
- echo arm-unknown-riscos
- exit ;;
- SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
- echo hppa1.1-hitachi-hiuxmpp
- exit ;;
- Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
- # address@hidden (Earle F. Ake) contributed MIS and NILE.
- if test "`(/bin/universe) 2>/dev/null`" = att ; then
- echo pyramid-pyramid-sysv3
- else
- echo pyramid-pyramid-bsd
- fi
- exit ;;
- NILE*:*:*:dcosx)
- echo pyramid-pyramid-svr4
- exit ;;
- DRS?6000:unix:4.0:6*)
- echo sparc-icl-nx6
- exit ;;
- DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
- case `/usr/bin/uname -p` in
- sparc) echo sparc-icl-nx7; exit ;;
- esac ;;
- sun4H:SunOS:5.*:*)
- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
- echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:6*:*)
- # According to config.sub, this is the proper way to canonicalize
- # SunOS6. Hard to guess exactly what SunOS6 will be like, but
- # it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:*:*)
- case "`/usr/bin/arch -k`" in
- Series*|S4*)
- UNAME_RELEASE=`uname -v`
- ;;
- esac
- # Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit ;;
- sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
- exit ;;
- sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}')
2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
- case "`/bin/arch`" in
- sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
- ;;
- sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
- ;;
- esac
- exit ;;
- aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
- exit ;;
- # The situation for MiNT is a little confusing. The machine name
- # can be virtually everything (everything which is not
- # "atarist" or "atariste" at least should have a processor
- # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
- # to the lowercase version "mint" (or "freemint"). Finally
- # the system name "TOS" denotes a system which is actually not
- # MiNT. But MiNT is downward compatible to TOS, so this should
- # be no problem.
- atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit ;;
- hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit ;;
- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit ;;
- m68k:machten:*:*)
- echo m68k-apple-machten${UNAME_RELEASE}
- exit ;;
- powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
- exit ;;
- RISC*:Mach:*:*)
- echo mips-dec-mach_bsd4.3
- exit ;;
- RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
- exit ;;
- VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
- exit ;;
- 2020:CLIX:*:* | 2430:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
- exit ;;
- mips:*:*:UMIPS | mips:*:*:RISCos)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
- #if defined (host_mips) && defined (MIPSEB)
- #if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
- #endif
- #endif
- exit (-1);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c &&
- dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
- SYSTEM_NAME=`$dummy $dummyarg` &&
- { echo "$SYSTEM_NAME"; exit; }
- echo mips-mips-riscos${UNAME_RELEASE}
- exit ;;
- Motorola:PowerMAX_OS:*:*)
- echo powerpc-motorola-powermax
- exit ;;
- Motorola:*:4.3:PL8-*)
- echo powerpc-harris-powermax
- exit ;;
- Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
- echo powerpc-harris-powermax
- exit ;;
- Night_Hawk:Power_UNIX:*:*)
- echo powerpc-harris-powerunix
- exit ;;
- m88k:CX/UX:7*:*)
- echo m88k-harris-cxux7
- exit ;;
- m88k:*:4*:R4*)
- echo m88k-motorola-sysv4
- exit ;;
- m88k:*:3*:R3*)
- echo m88k-motorola-sysv3
- exit ;;
- AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
- then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
- [ ${TARGET_BINARY_INTERFACE}x = x ]
- then
- echo m88k-dg-dgux${UNAME_RELEASE}
- else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
- fi
- else
- echo i586-dg-dgux${UNAME_RELEASE}
- fi
- exit ;;
- M88*:DolphinOS:*:*) # DolphinOS (SVR3)
- echo m88k-dolphin-sysv3
- exit ;;
- M88*:*:R3*:*)
- # Delta 88k system running SVR3
- echo m88k-motorola-sysv3
- exit ;;
- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
- echo m88k-tektronix-sysv3
- exit ;;
- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
- echo m68k-tektronix-bsd
- exit ;;
- *:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit ;;
- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i*86:AIX:*:*)
- echo i386-ibm-aix
- exit ;;
- ia64:AIX:*:*)
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit ;;
- *:AIX:2:3)
- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <sys/systemcfg.h>
-
- main()
- {
- if (!__power_pc())
- exit(1);
- puts("powerpc-ibm-aix3.2.5");
- exit(0);
- }
-EOF
- if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
- then
- echo "$SYSTEM_NAME"
- else
- echo rs6000-ibm-aix3.2.5
- fi
- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
- echo rs6000-ibm-aix3.2.4
- else
- echo rs6000-ibm-aix3.2
- fi
- exit ;;
- *:AIX:*:[45])
- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk
'{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1;
then
- IBM_ARCH=rs6000
- else
- IBM_ARCH=powerpc
- fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit ;;
- *:AIX:*:*)
- echo rs6000-ibm-aix
- exit ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
- echo romp-ibm-bsd4.4
- exit ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit ;; # report: romp-ibm BSD 4.3
- *:BOSX:*:*)
- echo rs6000-bull-bosx
- exit ;;
- DPX/2?00:B.O.S.:*:*)
- echo m68k-bull-sysv3
- exit ;;
- 9000/[34]??:4.3bsd:1.*:*)
- echo m68k-hp-bsd
- exit ;;
- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
- echo m68k-hp-bsd4.4
- exit ;;
- 9000/[34678]??:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/[678][0-9][0-9])
- if [ -x /usr/bin/getconf ]; then
- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS
2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
- fi
- if [ "${HP_ARCH}" = "" ]; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-
- #define _HPUX_SOURCE
- #include <stdlib.h>
- #include <unistd.h>
-
- int main ()
- {
- #if defined(_SC_KERNEL_BITS)
- long bits = sysconf(_SC_KERNEL_BITS);
- #endif
- long cpu = sysconf (_SC_CPU_VERSION);
-
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
- #if defined(_SC_KERNEL_BITS)
- switch (bits)
- {
- case 64: puts ("hppa2.0w"); break;
- case 32: puts ("hppa2.0n"); break;
- default: puts ("hppa2.0"); break;
- } break;
- #else /* !defined(_SC_KERNEL_BITS) */
- puts ("hppa2.0"); break;
- #endif
- default: puts ("hppa1.0"); break;
- }
- exit (0);
- }
-EOF
- (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) &&
HP_ARCH=`$dummy`
- test -z "$HP_ARCH" && HP_ARCH=hppa
- fi ;;
- esac
- if [ ${HP_ARCH} = "hppa2.0w" ]
- then
- eval $set_cc_for_build
-
- # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
- # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
- # generating 64-bit code. GNU and HP use different nomenclature:
- #
- # $ CC_FOR_BUILD=cc ./config.guess
- # => hppa2.0w-hp-hpux11.23
- # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
- # => hppa64-hp-hpux11.23
-
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
- grep __LP64__ >/dev/null
- then
- HP_ARCH="hppa2.0w"
- else
- HP_ARCH="hppa64"
- fi
- fi
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit ;;
- ia64:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ia64-hp-hpux${HPUX_REV}
- exit ;;
- 3050*:HI-UX:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <unistd.h>
- int
- main ()
- {
- long cpu = sysconf (_SC_CPU_VERSION);
- /* The order matters, because CPU_IS_HP_MC68K erroneously returns
- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
- results, however. */
- if (CPU_IS_PA_RISC (cpu))
- {
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
- default: puts ("hppa-hitachi-hiuxwe2"); break;
- }
- }
- else if (CPU_IS_HP_MC68K (cpu))
- puts ("m68k-hitachi-hiuxwe2");
- else puts ("unknown-hitachi-hiuxwe2");
- exit (0);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
- echo unknown-hitachi-hiuxwe2
- exit ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
- echo hppa1.1-hp-bsd
- exit ;;
- 9000/8??:4.3bsd:*:*)
- echo hppa1.0-hp-bsd
- exit ;;
- *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
- echo hppa1.0-hp-mpeix
- exit ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
- echo hppa1.1-hp-osf
- exit ;;
- hp8??:OSF1:*:*)
- echo hppa1.0-hp-osf
- exit ;;
- i*86:OSF1:*:*)
- if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
- else
- echo ${UNAME_MACHINE}-unknown-osf1
- fi
- exit ;;
- parisc*:Lites*:*:*)
- echo hppa1.1-hp-lites
- exit ;;
- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
- echo c1-convex-bsd
- exit ;;
- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
- echo c34-convex-bsd
- exit ;;
- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
- echo c38-convex-bsd
- exit ;;
- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
- echo c4-convex-bsd
- exit ;;
- CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
- -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- *:UNICOS/mp:*:*)
- echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
- 5000:UNIX_System_V:4.*:*)
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
- i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit ;;
- sparc*:BSD/OS:*:*)
- echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit ;;
- *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit ;;
- *:FreeBSD:*:*)
- case ${UNAME_MACHINE} in
- pc98)
- echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e
's/[-(].*//'` ;;
- amd64)
- echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e
's/[-(].*//'` ;;
- *)
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed
-e 's/[-(].*//'` ;;
- esac
- exit ;;
- i*:CYGWIN*:*)
- echo ${UNAME_MACHINE}-pc-cygwin
- exit ;;
- *:MINGW*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
- exit ;;
- i*:windows32*:*)
- # uname -m includes "-pc" on this system.
- echo ${UNAME_MACHINE}-mingw32
- exit ;;
- i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
- exit ;;
- *:Interix*:[3456]*)
- case ${UNAME_MACHINE} in
- x86)
- echo i586-pc-interix${UNAME_RELEASE}
- exit ;;
- EM64T | authenticamd)
- echo x86_64-unknown-interix${UNAME_RELEASE}
- exit ;;
- esac ;;
- [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
- echo i${UNAME_MACHINE}-pc-mks
- exit ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
- echo i586-pc-interix
- exit ;;
- i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
- exit ;;
- amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
- echo x86_64-unknown-cygwin
- exit ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin
- exit ;;
- prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e
's/[^.]*//'`
- exit ;;
- *:GNU:*:*)
- # the GNU system
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo
${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit ;;
- *:GNU/*:*:*)
- # other systems with GNU libc and userland
- echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,'
| tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
- exit ;;
- i*86:Minix:*:*)
- echo ${UNAME_MACHINE}-pc-minix
- exit ;;
- arm*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- avr32*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- cris:Linux:*:*)
- echo cris-axis-linux-gnu
- exit ;;
- crisv32:Linux:*:*)
- echo crisv32-axis-linux-gnu
- exit ;;
- frv:Linux:*:*)
- echo frv-unknown-linux-gnu
- exit ;;
- ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- m32r*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- mips:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips
- #undef mipsel
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) ||
defined(MIPSEL)
- CPU=mipsel
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) ||
defined(MIPSEB)
- CPU=mips
- #else
- CPU=
- #endif
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^CPU/{
- s: ::g
- p
- }'`"
- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
- ;;
- mips64:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips64
- #undef mips64el
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) ||
defined(MIPSEL)
- CPU=mips64el
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) ||
defined(MIPSEB)
- CPU=mips64
- #else
- CPU=
- #endif
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^CPU/{
- s: ::g
- p
- }'`"
- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
- ;;
- or32:Linux:*:*)
- echo or32-unknown-linux-gnu
- exit ;;
- ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
- exit ;;
- ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-gnu
- exit ;;
- alpha:Linux:*:*)
- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
- EV5) UNAME_MACHINE=alphaev5 ;;
- EV56) UNAME_MACHINE=alphaev56 ;;
- PCA56) UNAME_MACHINE=alphapca56 ;;
- PCA57) UNAME_MACHINE=alphapca56 ;;
- EV6) UNAME_MACHINE=alphaev6 ;;
- EV67) UNAME_MACHINE=alphaev67 ;;
- EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
- objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit ;;
- parisc:Linux:*:* | hppa:Linux:*:*)
- # Look for CPU level
- case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-unknown-linux-gnu ;;
- PA8*) echo hppa2.0-unknown-linux-gnu ;;
- *) echo hppa-unknown-linux-gnu ;;
- esac
- exit ;;
- parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-gnu
- exit ;;
- s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux
- exit ;;
- sh64*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- vax:Linux:*:*)
- echo ${UNAME_MACHINE}-dec-linux-gnu
- exit ;;
- x86_64:Linux:*:*)
- echo x86_64-unknown-linux-gnu
- exit ;;
- xtensa:Linux:*:*)
- echo xtensa-unknown-linux-gnu
- exit ;;
- i*86:Linux:*:*)
- # The BFD linker knows what the default object file format is, so
- # first see if it will tell us. cd to the root directory to prevent
- # problems with other programs or directories called `ld' in the path.
- # Set LC_ALL=C to ensure ld outputs messages in English.
- ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
- | sed -ne '/supported targets:/!d
- s/[ ][ ]*/ /g
- s/.*supported targets: *//
- s/ .*//
- p'`
- case "$ld_supported_targets" in
- elf32-i386)
- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
- ;;
- a.out-i386-linux)
- echo "${UNAME_MACHINE}-pc-linux-gnuaout"
- exit ;;
- coff-i386)
- echo "${UNAME_MACHINE}-pc-linux-gnucoff"
- exit ;;
- "")
- # Either a pre-BFD a.out linker (linux-gnuoldld) or
- # one that does not give us useful --help.
- echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
- exit ;;
- esac
- # Determine whether the default compiler is a.out or elf
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #ifdef __ELF__
- # ifdef __GLIBC__
- # if __GLIBC__ >= 2
- LIBC=gnu
- # else
- LIBC=gnulibc1
- # endif
- # else
- LIBC=gnulibc1
- # endif
- #else
- #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C)
|| defined(__SUNPRO_CC)
- LIBC=gnu
- #else
- LIBC=gnuaout
- #endif
- #endif
- #ifdef __dietlibc__
- LIBC=dietlibc
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^LIBC/{
- s: ::g
- p
- }'`"
- test x"${LIBC}" != x && {
- echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
- exit
- }
- test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
- ;;
- i*86:DYNIX/ptx:4*:*)
- # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
- # earlier versions are messed up and put the nodename in both
- # sysname and nodename.
- echo i386-sequent-sysv4
- exit ;;
- i*86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
- # I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit ;;
- i*86:OS/2:*:*)
- # If we were able to find `uname', then EMX Unix compatibility
- # is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
- exit ;;
- i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
- exit ;;
- i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
- exit ;;
- i*86:syllable:*:*)
- echo ${UNAME_MACHINE}-pc-syllable
- exit ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit ;;
- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
- else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
- fi
- exit ;;
- i*86:*:5:[678]*)
- # UnixWare 7.x, OpenUNIX and OpenServer 6.
- case `/bin/uname -X | grep "^Machine"` in
- *486*) UNAME_MACHINE=i486 ;;
- *Pentium) UNAME_MACHINE=i586 ;;
- *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
- esac
- echo
${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit ;;
- i*86:*:3.2:*)
- if test -f /usr/options/cb.name; then
- UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
- elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
- (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
- && UNAME_MACHINE=i586
- (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
- && UNAME_MACHINE=i686
- (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
- && UNAME_MACHINE=i686
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
- else
- echo ${UNAME_MACHINE}-pc-sysv32
- fi
- exit ;;
- pc:*:*:*)
- # Left here for compatibility:
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i386.
- echo i386-pc-msdosdjgpp
- exit ;;
- Intel:Mach:3*:*)
- echo i386-pc-mach3
- exit ;;
- paragon:*:*:*)
- echo i860-intel-osf1
- exit ;;
- i860:*:4.*:*) # i860-SVR4
- if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
- else # Add other i860-SVR4 vendors below as they are discovered.
- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
- fi
- exit ;;
- mini*:CTIX:SYS*5:*)
- # "miniframe"
- echo m68010-convergent-sysv
- exit ;;
- mc68k:UNIX:SYSTEM5:3.51m)
- echo m68k-convergent-sysv
- exit ;;
- M680?0:D-NIX:5.3:*)
- echo m68k-diab-dnix
- exit ;;
- M68*:*:R3V[5678]*:*)
- test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
- 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 |
3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 |
SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
- OS_REL=''
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
- 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4; exit; } ;;
- m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
- echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- mc68030:UNIX_System_V:4.*:*)
- echo m68k-atari-sysv4
- exit ;;
- TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- rs6000:LynxOS:2.*:*)
- echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
- echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- SM[BE]S:UNIX_SV:*:*)
- echo mips-dde-sysv${UNAME_RELEASE}
- exit ;;
- RM*:ReliantUNIX-*:*:*)
- echo mips-sni-sysv4
- exit ;;
- RM*:SINIX-*:*:*)
- echo mips-sni-sysv4
- exit ;;
- *:SINIX-*:*:*)
- if uname -p 2>/dev/null >/dev/null ; then
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- echo ${UNAME_MACHINE}-sni-sysv4
- else
- echo ns32k-sni-sysv
- fi
- exit ;;
- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <address@hidden>
- echo i586-unisys-sysv4
- exit ;;
- *:UNIX_System_V:4*:FTX*)
- # From Gerald Hewes <address@hidden>.
- # How about differentiating between stratus architectures? -djm
- echo hppa1.1-stratus-sysv4
- exit ;;
- *:*:*:FTX*)
- # From address@hidden
- echo i860-stratus-sysv4
- exit ;;
- i*86:VOS:*:*)
- # From address@hidden
- echo ${UNAME_MACHINE}-stratus-vos
- exit ;;
- *:VOS:*:*)
- # From address@hidden
- echo hppa1.1-stratus-vos
- exit ;;
- mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
- exit ;;
- news*:NEWS-OS:6*:*)
- echo mips-sony-newsos6
- exit ;;
- R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
- if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
- else
- echo mips-unknown-sysv${UNAME_RELEASE}
- fi
- exit ;;
- BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
- echo powerpc-be-beos
- exit ;;
- BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
- echo powerpc-apple-beos
- exit ;;
- BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
- echo i586-pc-beos
- exit ;;
- SX-4:SUPER-UX:*:*)
- echo sx4-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-5:SUPER-UX:*:*)
- echo sx5-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-6:SUPER-UX:*:*)
- echo sx6-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-7:SUPER-UX:*:*)
- echo sx7-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-8:SUPER-UX:*:*)
- echo sx8-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-8R:SUPER-UX:*:*)
- echo sx8r-nec-superux${UNAME_RELEASE}
- exit ;;
- Power*:Rhapsody:*:*)
- echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit ;;
- *:Rhapsody:*:*)
- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit ;;
- *:Darwin:*:*)
- UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
- case $UNAME_PROCESSOR in
- unknown) UNAME_PROCESSOR=powerpc ;;
- esac
- echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
- exit ;;
- *:procnto*:*:* | *:QNX:[0123456789]*:*)
- UNAME_PROCESSOR=`uname -p`
- if test "$UNAME_PROCESSOR" = "x86"; then
- UNAME_PROCESSOR=i386
- UNAME_MACHINE=pc
- fi
- echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
- exit ;;
- *:QNX:*:4*)
- echo i386-pc-qnx
- exit ;;
- NSE-?:NONSTOP_KERNEL:*:*)
- echo nse-tandem-nsk${UNAME_RELEASE}
- exit ;;
- NSR-?:NONSTOP_KERNEL:*:*)
- echo nsr-tandem-nsk${UNAME_RELEASE}
- exit ;;
- *:NonStop-UX:*:*)
- echo mips-compaq-nonstopux
- exit ;;
- BS2000:POSIX*:*:*)
- echo bs2000-siemens-sysv
- exit ;;
- DS/*:UNIX_System_V:*:*)
- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit ;;
- *:Plan9:*:*)
- # "uname -m" is not consistent, so use $cputype instead. 386
- # is converted to i386 for consistency with other x86
- # operating systems.
- if test "$cputype" = "386"; then
- UNAME_MACHINE=i386
- else
- UNAME_MACHINE="$cputype"
- fi
- echo ${UNAME_MACHINE}-unknown-plan9
- exit ;;
- *:TOPS-10:*:*)
- echo pdp10-unknown-tops10
- exit ;;
- *:TENEX:*:*)
- echo pdp10-unknown-tenex
- exit ;;
- KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
- echo pdp10-dec-tops20
- exit ;;
- XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
- echo pdp10-xkl-tops20
- exit ;;
- *:TOPS-20:*:*)
- echo pdp10-unknown-tops20
- exit ;;
- *:ITS:*:*)
- echo pdp10-unknown-its
- exit ;;
- SEI:*:*:SEIUX)
- echo mips-sei-seiux${UNAME_RELEASE}
- exit ;;
- *:DragonFly:*:*)
- echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e
's/[-(].*//'`
- exit ;;
- *:*VMS:*:*)
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- case "${UNAME_MACHINE}" in
- A*) echo alpha-dec-vms ; exit ;;
- I*) echo ia64-dec-vms ; exit ;;
- V*) echo vax-dec-vms ; exit ;;
- esac ;;
- *:XENIX:*:SysV)
- echo i386-pc-xenix
- exit ;;
- i*86:skyos:*:*)
- echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/
.*$//'
- exit ;;
- i*86:rdos:*:*)
- echo ${UNAME_MACHINE}-pc-rdos
- exit ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- c34*)
- echo c34-convex-bsd
- exit ;;
- c38*)
- echo c38-convex-bsd
- exit ;;
- c4*)
- echo c4-convex-bsd
- exit ;;
- esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
- http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
-and
- http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <address@hidden> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo = `(hostinfo) 2>/dev/null`
-/bin/universe = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/myserver/config.sub b/myserver/config.sub
deleted file mode 100755
index 1761d8b..0000000
--- a/myserver/config.sub
+++ /dev/null
@@ -1,1626 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
-# Inc.
-
-timestamp='2007-06-28'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine. It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Please send patches to <address@hidden>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support. The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
- $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <address@hidden>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit ;;
- --version | -v )
- echo "$version" ; exit ;;
- --help | --h* | -h )
- echo "$usage"; exit ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help"
- exit 1 ;;
-
- *local*)
- # First pass through any local machine types.
- echo $1
- exit ;;
-
- * )
- break ;;
- esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
- exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
- exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
- nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
- uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* |
netbsd*-gnu* | \
- storm-chaos* | os2-emx* | rtmk-nova*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
- ;;
- *)
- basic_machine=`echo $1 | sed 's/-[^-]*$//'`
- if [ $basic_machine != $1 ]
- then os=`echo $1 | sed 's/.*-/-/'`
- else os=; fi
- ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work. We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
- -sun*os*)
- # Prevent following clause from handling this invalid input.
- ;;
- -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
- -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
- -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
- -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
- -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis | -knuth | -cray)
- os=
- basic_machine=$1
- ;;
- -sim | -cisco | -oki | -wec | -winbond)
- os=
- basic_machine=$1
- ;;
- -scout)
- ;;
- -wrs)
- os=-vxworks
- basic_machine=$1
- ;;
- -chorusos*)
- os=-chorusos
- basic_machine=$1
- ;;
- -chorusrdb)
- os=-chorusrdb
- basic_machine=$1
- ;;
- -hiux*)
- os=-hiuxwe2
- ;;
- -sco6)
- os=-sco5v6
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco5)
- os=-sco3.2v5
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco4)
- os=-sco3.2v4
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2.[4-9]*)
- os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2v[4-9]*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco5v6*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco*)
- os=-sco3.2v2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -udk*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -isc)
- os=-isc2.2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -clix*)
- basic_machine=clipper-intergraph
- ;;
- -isc*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -lynx*)
- os=-lynxos
- ;;
- -ptx*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
- ;;
- -windowsnt*)
- os=`echo $os | sed -e 's/windowsnt/winnt/'`
- ;;
- -psos*)
- os=-psos
- ;;
- -mint | -mint[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
- # Recognize the basic CPU types without company name.
- # Some are omitted here because they have special meanings below.
- 1750a | 580 \
- | a29k \
- | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
- | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] |
alpha64pca5[67] \
- | am33_2.0 \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr |
avr32 \
- | bfin \
- | c4x | clipper \
- | d10v | d30v | dlx | dsp16xx \
- | fido | fr30 | frv \
- | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
- | i370 | i860 | i960 | ia64 \
- | ip2k | iq2000 \
- | m32c | m32r | m32rle | m68000 | m68k | m88k \
- | maxq | mb | microblaze | mcore | mep \
- | mips | mipsbe | mipseb | mipsel | mipsle \
- | mips16 \
- | mips64 | mips64el \
- | mips64vr | mips64vrel \
- | mips64orion | mips64orionel \
- | mips64vr4100 | mips64vr4100el \
- | mips64vr4300 | mips64vr4300el \
- | mips64vr5000 | mips64vr5000el \
- | mips64vr5900 | mips64vr5900el \
- | mipsisa32 | mipsisa32el \
- | mipsisa32r2 | mipsisa32r2el \
- | mipsisa64 | mipsisa64el \
- | mipsisa64r2 | mipsisa64r2el \
- | mipsisa64sb1 | mipsisa64sb1el \
- | mipsisa64sr71k | mipsisa64sr71kel \
- | mipstx39 | mipstx39el \
- | mn10200 | mn10300 \
- | mt \
- | msp430 \
- | nios | nios2 \
- | ns16k | ns32k \
- | or32 \
- | pdp10 | pdp11 | pj | pjl \
- | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
- | pyramid \
- | score \
- | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle |
sh[1234]le | sh3ele \
- | sh64 | sh64le \
- | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet |
sparclite \
- | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
- | spu | strongarm \
- | tahoe | thumb | tic4x | tic80 | tron \
- | v850 | v850e \
- | we32k \
- | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
- | z8k)
- basic_machine=$basic_machine-unknown
- ;;
- m6811 | m68hc11 | m6812 | m68hc12)
- # Motorola 68HC11/12.
- basic_machine=$basic_machine-unknown
- os=-none
- ;;
- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
- ;;
- ms1)
- basic_machine=mt-unknown
- ;;
-
- # We use `pc' rather than `unknown'
- # because (1) that's what they normally are, and
- # (2) the word "unknown" tends to confuse beginning users.
- i*86 | x86_64)
- basic_machine=$basic_machine-pc
- ;;
- # Object if more than one company name word.
- *-*-*)
- echo Invalid configuration \`$1\': machine \`$basic_machine\'
not recognized 1>&2
- exit 1
- ;;
- # Recognize the basic CPU types with company name.
- 580-* \
- | a29k-* \
- | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
- | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
- | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
- | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
- | avr-* | avr32-* \
- | bfin-* | bs2000-* \
- | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
- | clipper-* | craynv-* | cydra-* \
- | d10v-* | d30v-* | dlx-* \
- | elxsi-* \
- | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
- | h8300-* | h8500-* \
- | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
- | i*86-* | i860-* | i960-* | ia64-* \
- | ip2k-* | iq2000-* \
- | m32c-* | m32r-* | m32rle-* \
- | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | maxq-* | mcore-* \
- | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
- | mips16-* \
- | mips64-* | mips64el-* \
- | mips64vr-* | mips64vrel-* \
- | mips64orion-* | mips64orionel-* \
- | mips64vr4100-* | mips64vr4100el-* \
- | mips64vr4300-* | mips64vr4300el-* \
- | mips64vr5000-* | mips64vr5000el-* \
- | mips64vr5900-* | mips64vr5900el-* \
- | mipsisa32-* | mipsisa32el-* \
- | mipsisa32r2-* | mipsisa32r2el-* \
- | mipsisa64-* | mipsisa64el-* \
- | mipsisa64r2-* | mipsisa64r2el-* \
- | mipsisa64sb1-* | mipsisa64sb1el-* \
- | mipsisa64sr71k-* | mipsisa64sr71kel-* \
- | mipstx39-* | mipstx39el-* \
- | mmix-* \
- | mt-* \
- | msp430-* \
- | nios-* | nios2-* \
- | none-* | np1-* | ns16k-* | ns32k-* \
- | orion-* \
- | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
- | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
- | pyramid-* \
- | romp-* | rs6000-* \
- | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* |
shbe-* \
- | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
- | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* |
sparclet-* \
- | sparclite-* \
- | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-*
| sx?-* \
- | tahoe-* | thumb-* \
- | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
- | tron-* \
- | v850-* | v850e-* | vax-* \
- | we32k-* \
- | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
- | xstormy16-* | xtensa-* \
- | ymp-* \
- | z8k-*)
- ;;
- # Recognize the various machine names and aliases which stand
- # for a CPU type and a company and sometimes even an OS.
- 386bsd)
- basic_machine=i386-unknown
- os=-bsd
- ;;
- 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
- basic_machine=m68000-att
- ;;
- 3b*)
- basic_machine=we32k-att
- ;;
- a29khif)
- basic_machine=a29k-amd
- os=-udi
- ;;
- abacus)
- basic_machine=abacus-unknown
- ;;
- adobe68k)
- basic_machine=m68010-adobe
- os=-scout
- ;;
- alliant | fx80)
- basic_machine=fx80-alliant
- ;;
- altos | altos3068)
- basic_machine=m68k-altos
- ;;
- am29k)
- basic_machine=a29k-none
- os=-bsd
- ;;
- amd64)
- basic_machine=x86_64-pc
- ;;
- amd64-*)
- basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- amdahl)
- basic_machine=580-amdahl
- os=-sysv
- ;;
- amiga | amiga-*)
- basic_machine=m68k-unknown
- ;;
- amigaos | amigados)
- basic_machine=m68k-unknown
- os=-amigaos
- ;;
- amigaunix | amix)
- basic_machine=m68k-unknown
- os=-sysv4
- ;;
- apollo68)
- basic_machine=m68k-apollo
- os=-sysv
- ;;
- apollo68bsd)
- basic_machine=m68k-apollo
- os=-bsd
- ;;
- aux)
- basic_machine=m68k-apple
- os=-aux
- ;;
- balance)
- basic_machine=ns32k-sequent
- os=-dynix
- ;;
- c90)
- basic_machine=c90-cray
- os=-unicos
- ;;
- convex-c1)
- basic_machine=c1-convex
- os=-bsd
- ;;
- convex-c2)
- basic_machine=c2-convex
- os=-bsd
- ;;
- convex-c32)
- basic_machine=c32-convex
- os=-bsd
- ;;
- convex-c34)
- basic_machine=c34-convex
- os=-bsd
- ;;
- convex-c38)
- basic_machine=c38-convex
- os=-bsd
- ;;
- cray | j90)
- basic_machine=j90-cray
- os=-unicos
- ;;
- craynv)
- basic_machine=craynv-cray
- os=-unicosmp
- ;;
- cr16)
- basic_machine=cr16-unknown
- os=-elf
- ;;
- crds | unos)
- basic_machine=m68k-crds
- ;;
- crisv32 | crisv32-* | etraxfs*)
- basic_machine=crisv32-axis
- ;;
- cris | cris-* | etrax*)
- basic_machine=cris-axis
- ;;
- crx)
- basic_machine=crx-unknown
- os=-elf
- ;;
- da30 | da30-*)
- basic_machine=m68k-da30
- ;;
- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 |
decstatn)
- basic_machine=mips-dec
- ;;
- decsystem10* | dec10*)
- basic_machine=pdp10-dec
- os=-tops10
- ;;
- decsystem20* | dec20*)
- basic_machine=pdp10-dec
- os=-tops20
- ;;
- delta | 3300 | motorola-3300 | motorola-delta \
- | 3300-motorola | delta-motorola)
- basic_machine=m68k-motorola
- ;;
- delta88)
- basic_machine=m88k-motorola
- os=-sysv3
- ;;
- djgpp)
- basic_machine=i586-pc
- os=-msdosdjgpp
- ;;
- dpx20 | dpx20-*)
- basic_machine=rs6000-bull
- os=-bosx
- ;;
- dpx2* | dpx2*-bull)
- basic_machine=m68k-bull
- os=-sysv3
- ;;
- ebmon29k)
- basic_machine=a29k-amd
- os=-ebmon
- ;;
- elxsi)
- basic_machine=elxsi-elxsi
- os=-bsd
- ;;
- encore | umax | mmax)
- basic_machine=ns32k-encore
- ;;
- es1800 | OSE68k | ose68k | ose | OSE)
- basic_machine=m68k-ericsson
- os=-ose
- ;;
- fx2800)
- basic_machine=i860-alliant
- ;;
- genix)
- basic_machine=ns32k-ns
- ;;
- gmicro)
- basic_machine=tron-gmicro
- os=-sysv
- ;;
- go32)
- basic_machine=i386-pc
- os=-go32
- ;;
- h3050r* | hiux*)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- h8300hms)
- basic_machine=h8300-hitachi
- os=-hms
- ;;
- h8300xray)
- basic_machine=h8300-hitachi
- os=-xray
- ;;
- h8500hms)
- basic_machine=h8500-hitachi
- os=-hms
- ;;
- harris)
- basic_machine=m88k-harris
- os=-sysv3
- ;;
- hp300-*)
- basic_machine=m68k-hp
- ;;
- hp300bsd)
- basic_machine=m68k-hp
- os=-bsd
- ;;
- hp300hpux)
- basic_machine=m68k-hp
- os=-hpux
- ;;
- hp3k9[0-9][0-9] | hp9[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k2[0-9][0-9] | hp9k31[0-9])
- basic_machine=m68000-hp
- ;;
- hp9k3[2-9][0-9])
- basic_machine=m68k-hp
- ;;
- hp9k6[0-9][0-9] | hp6[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k7[0-79][0-9] | hp7[0-79][0-9])
- basic_machine=hppa1.1-hp
- ;;
- hp9k78[0-9] | hp78[0-9])
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 |
hp9k893 | hp893)
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][13679] | hp8[0-9][13679])
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][0-9] | hp8[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hppa-next)
- os=-nextstep3
- ;;
- hppaosf)
- basic_machine=hppa1.1-hp
- os=-osf
- ;;
- hppro)
- basic_machine=hppa1.1-hp
- os=-proelf
- ;;
- i370-ibm* | ibm*)
- basic_machine=i370-ibm
- ;;
-# I'm not sure what "Sysv32" means. Should this be sysv3.2?
- i*86v32)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv32
- ;;
- i*86v4*)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv4
- ;;
- i*86v)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv
- ;;
- i*86sol2)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-solaris2
- ;;
- i386mach)
- basic_machine=i386-mach
- os=-mach
- ;;
- i386-vsta | vsta)
- basic_machine=i386-unknown
- os=-vsta
- ;;
- iris | iris4d)
- basic_machine=mips-sgi
- case $os in
- -irix*)
- ;;
- *)
- os=-irix4
- ;;
- esac
- ;;
- isi68 | isi)
- basic_machine=m68k-isi
- os=-sysv
- ;;
- m88k-omron*)
- basic_machine=m88k-omron
- ;;
- magnum | m3230)
- basic_machine=mips-mips
- os=-sysv
- ;;
- merlin)
- basic_machine=ns32k-utek
- os=-sysv
- ;;
- mingw32)
- basic_machine=i386-pc
- os=-mingw32
- ;;
- mingw32ce)
- basic_machine=arm-unknown
- os=-mingw32ce
- ;;
- miniframe)
- basic_machine=m68000-convergent
- ;;
- *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
- mips3*-*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
- ;;
- mips3*)
- basic_machine=`echo $basic_machine | sed -e
's/mips3/mips64/'`-unknown
- ;;
- monitor)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- morphos)
- basic_machine=powerpc-unknown
- os=-morphos
- ;;
- msdos)
- basic_machine=i386-pc
- os=-msdos
- ;;
- ms1-*)
- basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
- ;;
- mvs)
- basic_machine=i370-ibm
- os=-mvs
- ;;
- ncr3000)
- basic_machine=i486-ncr
- os=-sysv4
- ;;
- netbsd386)
- basic_machine=i386-unknown
- os=-netbsd
- ;;
- netwinder)
- basic_machine=armv4l-rebel
- os=-linux
- ;;
- news | news700 | news800 | news900)
- basic_machine=m68k-sony
- os=-newsos
- ;;
- news1000)
- basic_machine=m68030-sony
- os=-newsos
- ;;
- news-3600 | risc-news)
- basic_machine=mips-sony
- os=-newsos
- ;;
- necv70)
- basic_machine=v70-nec
- os=-sysv
- ;;
- next | m*-next )
- basic_machine=m68k-next
- case $os in
- -nextstep* )
- ;;
- -ns2*)
- os=-nextstep2
- ;;
- *)
- os=-nextstep3
- ;;
- esac
- ;;
- nh3000)
- basic_machine=m68k-harris
- os=-cxux
- ;;
- nh[45]000)
- basic_machine=m88k-harris
- os=-cxux
- ;;
- nindy960)
- basic_machine=i960-intel
- os=-nindy
- ;;
- mon960)
- basic_machine=i960-intel
- os=-mon960
- ;;
- nonstopux)
- basic_machine=mips-compaq
- os=-nonstopux
- ;;
- np1)
- basic_machine=np1-gould
- ;;
- nsr-tandem)
- basic_machine=nsr-tandem
- ;;
- op50n-* | op60c-*)
- basic_machine=hppa1.1-oki
- os=-proelf
- ;;
- openrisc | openrisc-*)
- basic_machine=or32-unknown
- ;;
- os400)
- basic_machine=powerpc-ibm
- os=-os400
- ;;
- OSE68000 | ose68000)
- basic_machine=m68000-ericsson
- os=-ose
- ;;
- os68k)
- basic_machine=m68k-none
- os=-os68k
- ;;
- pa-hitachi)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- paragon)
- basic_machine=i860-intel
- os=-osf
- ;;
- pbd)
- basic_machine=sparc-tti
- ;;
- pbb)
- basic_machine=m68k-tti
- ;;
- pc532 | pc532-*)
- basic_machine=ns32k-pc532
- ;;
- pc98)
- basic_machine=i386-pc
- ;;
- pc98-*)
- basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentium | p5 | k5 | k6 | nexgen | viac3)
- basic_machine=i586-pc
- ;;
- pentiumpro | p6 | 6x86 | athlon | athlon_*)
- basic_machine=i686-pc
- ;;
- pentiumii | pentium2 | pentiumiii | pentium3)
- basic_machine=i686-pc
- ;;
- pentium4)
- basic_machine=i786-pc
- ;;
- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumpro-* | p6-* | 6x86-* | athlon-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentium4-*)
- basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pn)
- basic_machine=pn-gould
- ;;
- power) basic_machine=power-ibm
- ;;
- ppc) basic_machine=powerpc-unknown
- ;;
- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
- basic_machine=powerpcle-unknown
- ;;
- ppcle-* | powerpclittle-*)
- basic_machine=powerpcle-`echo $basic_machine | sed
's/^[^-]*-//'`
- ;;
- ppc64) basic_machine=powerpc64-unknown
- ;;
- ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed
's/^[^-]*-//'`
- ;;
- ppc64le | powerpc64little | ppc64-le | powerpc64-little)
- basic_machine=powerpc64le-unknown
- ;;
- ppc64le-* | powerpc64little-*)
- basic_machine=powerpc64le-`echo $basic_machine | sed
's/^[^-]*-//'`
- ;;
- ps2)
- basic_machine=i386-ibm
- ;;
- pw32)
- basic_machine=i586-unknown
- os=-pw32
- ;;
- rdos)
- basic_machine=i386-pc
- os=-rdos
- ;;
- rom68k)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- rm[46]00)
- basic_machine=mips-siemens
- ;;
- rtpc | rtpc-*)
- basic_machine=romp-ibm
- ;;
- s390 | s390-*)
- basic_machine=s390-ibm
- ;;
- s390x | s390x-*)
- basic_machine=s390x-ibm
- ;;
- sa29200)
- basic_machine=a29k-amd
- os=-udi
- ;;
- sb1)
- basic_machine=mipsisa64sb1-unknown
- ;;
- sb1el)
- basic_machine=mipsisa64sb1el-unknown
- ;;
- sde)
- basic_machine=mipsisa32-sde
- os=-elf
- ;;
- sei)
- basic_machine=mips-sei
- os=-seiux
- ;;
- sequent)
- basic_machine=i386-sequent
- ;;
- sh)
- basic_machine=sh-hitachi
- os=-hms
- ;;
- sh5el)
- basic_machine=sh5le-unknown
- ;;
- sh64)
- basic_machine=sh64-unknown
- ;;
- sparclite-wrs | simso-wrs)
- basic_machine=sparclite-wrs
- os=-vxworks
- ;;
- sps7)
- basic_machine=m68k-bull
- os=-sysv2
- ;;
- spur)
- basic_machine=spur-unknown
- ;;
- st2000)
- basic_machine=m68k-tandem
- ;;
- stratus)
- basic_machine=i860-stratus
- os=-sysv4
- ;;
- sun2)
- basic_machine=m68000-sun
- ;;
- sun2os3)
- basic_machine=m68000-sun
- os=-sunos3
- ;;
- sun2os4)
- basic_machine=m68000-sun
- os=-sunos4
- ;;
- sun3os3)
- basic_machine=m68k-sun
- os=-sunos3
- ;;
- sun3os4)
- basic_machine=m68k-sun
- os=-sunos4
- ;;
- sun4os3)
- basic_machine=sparc-sun
- os=-sunos3
- ;;
- sun4os4)
- basic_machine=sparc-sun
- os=-sunos4
- ;;
- sun4sol2)
- basic_machine=sparc-sun
- os=-solaris2
- ;;
- sun3 | sun3-*)
- basic_machine=m68k-sun
- ;;
- sun4)
- basic_machine=sparc-sun
- ;;
- sun386 | sun386i | roadrunner)
- basic_machine=i386-sun
- ;;
- sv1)
- basic_machine=sv1-cray
- os=-unicos
- ;;
- symmetry)
- basic_machine=i386-sequent
- os=-dynix
- ;;
- t3e)
- basic_machine=alphaev5-cray
- os=-unicos
- ;;
- t90)
- basic_machine=t90-cray
- os=-unicos
- ;;
- tic54x | c54x*)
- basic_machine=tic54x-unknown
- os=-coff
- ;;
- tic55x | c55x*)
- basic_machine=tic55x-unknown
- os=-coff
- ;;
- tic6x | c6x*)
- basic_machine=tic6x-unknown
- os=-coff
- ;;
- tx39)
- basic_machine=mipstx39-unknown
- ;;
- tx39el)
- basic_machine=mipstx39el-unknown
- ;;
- toad1)
- basic_machine=pdp10-xkl
- os=-tops20
- ;;
- tower | tower-32)
- basic_machine=m68k-ncr
- ;;
- tpf)
- basic_machine=s390x-ibm
- os=-tpf
- ;;
- udi29k)
- basic_machine=a29k-amd
- os=-udi
- ;;
- ultra3)
- basic_machine=a29k-nyu
- os=-sym1
- ;;
- v810 | necv810)
- basic_machine=v810-nec
- os=-none
- ;;
- vaxv)
- basic_machine=vax-dec
- os=-sysv
- ;;
- vms)
- basic_machine=vax-dec
- os=-vms
- ;;
- vpp*|vx|vx-*)
- basic_machine=f301-fujitsu
- ;;
- vxworks960)
- basic_machine=i960-wrs
- os=-vxworks
- ;;
- vxworks68)
- basic_machine=m68k-wrs
- os=-vxworks
- ;;
- vxworks29k)
- basic_machine=a29k-wrs
- os=-vxworks
- ;;
- w65*)
- basic_machine=w65-wdc
- os=-none
- ;;
- w89k-*)
- basic_machine=hppa1.1-winbond
- os=-proelf
- ;;
- xbox)
- basic_machine=i686-pc
- os=-mingw32
- ;;
- xps | xps100)
- basic_machine=xps100-honeywell
- ;;
- ymp)
- basic_machine=ymp-cray
- os=-unicos
- ;;
- z8k-*-coff)
- basic_machine=z8k-unknown
- os=-sim
- ;;
- none)
- basic_machine=none-none
- os=-none
- ;;
-
-# Here we handle the default manufacturer of certain CPU types. It is in
-# some cases the only manufacturer, in others, it is the most popular.
- w89k)
- basic_machine=hppa1.1-winbond
- ;;
- op50n)
- basic_machine=hppa1.1-oki
- ;;
- op60c)
- basic_machine=hppa1.1-oki
- ;;
- romp)
- basic_machine=romp-ibm
- ;;
- mmix)
- basic_machine=mmix-knuth
- ;;
- rs6000)
- basic_machine=rs6000-ibm
- ;;
- vax)
- basic_machine=vax-dec
- ;;
- pdp10)
- # there are many clones, so DEC is not a safe bet
- basic_machine=pdp10-unknown
- ;;
- pdp11)
- basic_machine=pdp11-dec
- ;;
- we32k)
- basic_machine=we32k-att
- ;;
- sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
- basic_machine=sh-unknown
- ;;
- sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
- basic_machine=sparc-sun
- ;;
- cydra)
- basic_machine=cydra-cydrome
- ;;
- orion)
- basic_machine=orion-highlevel
- ;;
- orion105)
- basic_machine=clipper-highlevel
- ;;
- mac | mpw | mac-mpw)
- basic_machine=m68k-apple
- ;;
- pmac | pmac-mpw)
- basic_machine=powerpc-apple
- ;;
- *-unknown)
- # Make sure to match an already-canonicalized machine name.
- ;;
- *)
- echo Invalid configuration \`$1\': machine \`$basic_machine\'
not recognized 1>&2
- exit 1
- ;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
- *-digital*)
- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
- ;;
- *-commodore*)
- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
- ;;
- *)
- ;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
- # -solaris* is a basic system type, with this one exception.
- -solaris1 | -solaris1.*)
- os=`echo $os | sed -e 's|solaris1|sunos4|'`
- ;;
- -solaris)
- os=-solaris2
- ;;
- -svr4*)
- os=-sysv4
- ;;
- -unixware*)
- os=-sysv4.2uw
- ;;
- -gnu/linux*)
- os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
- ;;
- # First accept the basic system types.
- # The portable systems comes first.
- # Each alternative MUST END IN A *, to match a version number.
- # -sysv* is not here because it comes later, after sysvr4.
- -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
- | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* \
- | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
- | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
- | -openbsd* | -solidbsd* \
- | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
- | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* \
- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
- | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
- | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
- | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
- | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
- | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
- | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
- # Remember, each alternative MUST END IN *, to match a version number.
- ;;
- -qnx*)
- case $basic_machine in
- x86-* | i*86-*)
- ;;
- *)
- os=-nto$os
- ;;
- esac
- ;;
- -nto-qnx*)
- ;;
- -nto*)
- os=`echo $os | sed -e 's|nto|nto-qnx|'`
- ;;
- -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku*
\
- | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
- ;;
- -mac*)
- os=`echo $os | sed -e 's|mac|macos|'`
- ;;
- -linux-dietlibc)
- os=-linux-dietlibc
- ;;
- -linux*)
- os=`echo $os | sed -e 's|linux|linux-gnu|'`
- ;;
- -sunos5*)
- os=`echo $os | sed -e 's|sunos5|solaris2|'`
- ;;
- -sunos6*)
- os=`echo $os | sed -e 's|sunos6|solaris3|'`
- ;;
- -opened*)
- os=-openedition
- ;;
- -os400*)
- os=-os400
- ;;
- -wince*)
- os=-wince
- ;;
- -osfrose*)
- os=-osfrose
- ;;
- -osf*)
- os=-osf
- ;;
- -utek*)
- os=-bsd
- ;;
- -dynix*)
- os=-bsd
- ;;
- -acis*)
- os=-aos
- ;;
- -atheos*)
- os=-atheos
- ;;
- -syllable*)
- os=-syllable
- ;;
- -386bsd)
- os=-bsd
- ;;
- -ctix* | -uts*)
- os=-sysv
- ;;
- -nova*)
- os=-rtmk-nova
- ;;
- -ns2 )
- os=-nextstep2
- ;;
- -nsk*)
- os=-nsk
- ;;
- # Preserve the version number of sinix5.
- -sinix5.*)
- os=`echo $os | sed -e 's|sinix|sysv|'`
- ;;
- -sinix*)
- os=-sysv4
- ;;
- -tpf*)
- os=-tpf
- ;;
- -triton*)
- os=-sysv3
- ;;
- -oss*)
- os=-sysv3
- ;;
- -svr4)
- os=-sysv4
- ;;
- -svr3)
- os=-sysv3
- ;;
- -sysvr4)
- os=-sysv4
- ;;
- # This must come after -sysvr4.
- -sysv*)
- ;;
- -ose*)
- os=-ose
- ;;
- -es1800*)
- os=-ose
- ;;
- -xenix)
- os=-xenix
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- os=-mint
- ;;
- -aros*)
- os=-aros
- ;;
- -kaos*)
- os=-kaos
- ;;
- -zvmoe)
- os=-zvmoe
- ;;
- -none)
- ;;
- *)
- # Get rid of the `-' at the beginning of $os.
- os=`echo $os | sed 's/[^-]*-//'`
- echo Invalid configuration \`$1\': system \`$os\' not
recognized 1>&2
- exit 1
- ;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system. Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
- score-*)
- os=-elf
- ;;
- spu-*)
- os=-elf
- ;;
- *-acorn)
- os=-riscix1.2
- ;;
- arm*-rebel)
- os=-linux
- ;;
- arm*-semi)
- os=-aout
- ;;
- c4x-* | tic4x-*)
- os=-coff
- ;;
- # This must come before the *-dec entry.
- pdp10-*)
- os=-tops20
- ;;
- pdp11-*)
- os=-none
- ;;
- *-dec | vax-*)
- os=-ultrix4.2
- ;;
- m68*-apollo)
- os=-domain
- ;;
- i386-sun)
- os=-sunos4.0.2
- ;;
- m68000-sun)
- os=-sunos3
- # This also exists in the configure program, but was not the
- # default.
- # os=-sunos4
- ;;
- m68*-cisco)
- os=-aout
- ;;
- mep-*)
- os=-elf
- ;;
- mips*-cisco)
- os=-elf
- ;;
- mips*-*)
- os=-elf
- ;;
- or32-*)
- os=-coff
- ;;
- *-tti) # must be before sparc entry or we get the wrong os.
- os=-sysv3
- ;;
- sparc-* | *-sun)
- os=-sunos4.1.1
- ;;
- *-be)
- os=-beos
- ;;
- *-haiku)
- os=-haiku
- ;;
- *-ibm)
- os=-aix
- ;;
- *-knuth)
- os=-mmixware
- ;;
- *-wec)
- os=-proelf
- ;;
- *-winbond)
- os=-proelf
- ;;
- *-oki)
- os=-proelf
- ;;
- *-hp)
- os=-hpux
- ;;
- *-hitachi)
- os=-hiux
- ;;
- i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
- os=-sysv
- ;;
- *-cbm)
- os=-amigaos
- ;;
- *-dg)
- os=-dgux
- ;;
- *-dolphin)
- os=-sysv3
- ;;
- m68k-ccur)
- os=-rtu
- ;;
- m88k-omron*)
- os=-luna
- ;;
- *-next )
- os=-nextstep
- ;;
- *-sequent)
- os=-ptx
- ;;
- *-crds)
- os=-unos
- ;;
- *-ns)
- os=-genix
- ;;
- i370-*)
- os=-mvs
- ;;
- *-next)
- os=-nextstep3
- ;;
- *-gould)
- os=-sysv
- ;;
- *-highlevel)
- os=-bsd
- ;;
- *-encore)
- os=-bsd
- ;;
- *-sgi)
- os=-irix
- ;;
- *-siemens)
- os=-sysv4
- ;;
- *-masscomp)
- os=-rtu
- ;;
- f30[01]-fujitsu | f700-fujitsu)
- os=-uxpv
- ;;
- *-rom68k)
- os=-coff
- ;;
- *-*bug)
- os=-coff
- ;;
- *-apple)
- os=-macos
- ;;
- *-atari*)
- os=-mint
- ;;
- *)
- os=-none
- ;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer. We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
- *-unknown)
- case $os in
- -riscix*)
- vendor=acorn
- ;;
- -sunos*)
- vendor=sun
- ;;
- -aix*)
- vendor=ibm
- ;;
- -beos*)
- vendor=be
- ;;
- -hpux*)
- vendor=hp
- ;;
- -mpeix*)
- vendor=hp
- ;;
- -hiux*)
- vendor=hitachi
- ;;
- -unos*)
- vendor=crds
- ;;
- -dgux*)
- vendor=dg
- ;;
- -luna*)
- vendor=omron
- ;;
- -genix*)
- vendor=ns
- ;;
- -mvs* | -opened*)
- vendor=ibm
- ;;
- -os400*)
- vendor=ibm
- ;;
- -ptx*)
- vendor=sequent
- ;;
- -tpf*)
- vendor=ibm
- ;;
- -vxsim* | -vxworks* | -windiss*)
- vendor=wrs
- ;;
- -aux*)
- vendor=apple
- ;;
- -hms*)
- vendor=hitachi
- ;;
- -mpw* | -macos*)
- vendor=apple
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- vendor=atari
- ;;
- -vos*)
- vendor=stratus
- ;;
- esac
- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
- ;;
-esac
-
-echo $basic_machine$os
-exit
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/myserver/configure.in b/myserver/configure.ac
similarity index 96%
rename from myserver/configure.in
rename to myserver/configure.ac
index 5102d2a..0474f21 100644
--- a/myserver/configure.in
+++ b/myserver/configure.ac
@@ -17,7 +17,7 @@ dnl You should have received a copy of the GNU General Public
License
dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
AC_INIT([GNU MyServer], m4_esyscmd([cat version]), address@hidden)
-AC_PREREQ([2.50])
+AC_PREREQ([2.61])
AM_CONFIG_HEADER(config.h)
CFLAGS="${CFLAGS=}"
CXXFLAGS="${CXXFLAGS=}"
@@ -25,28 +25,33 @@ LDFLAGS="${LDFLAGS=}"
AC_CANONICAL_HOST
AC_CANONICAL_TARGET
-AM_INIT_AUTOMAKE
+AM_INIT_AUTOMAKE([gnu])
-PACKAGE_STRING="m4_esyscmd([cat version])"
-MYSERVER_VERSION="${PACKAGE_STRING}"
-
-AC_SUBST(MYSERVER_VERSION)
-
-AC_DEFINE_UNQUOTED([MYSERVER_VERSION], ["${MYSERVER_VERSION}"], [The software
version])
+AC_CONFIG_MACRO_DIR([m4])
+AC_PROG_INSTALL
AC_PROG_CC
-AC_PROG_CPP
+AC_PROG_CXX
+
AC_AIX
AC_ISC_POSIX
AC_MINIX
AC_HEADER_STDC
-AC_PROG_CXX
-AC_PROG_CXXCPP
-AC_PROG_RANLIB
-AC_PROG_LIBTOOL
AM_PROG_LEX
AC_PROG_YACC
AC_C_BIGENDIAN
+AC_PROG_RANLIB
+AC_PROG_LIBTOOL
+
+AC_CANONICAL_HOST
+AC_LIBTOOL_WIN32_DLL
+
+PACKAGE_STRING="m4_esyscmd([cat version])"
+MYSERVER_VERSION="${PACKAGE_STRING}"
+
+AC_SUBST(MYSERVER_VERSION)
+
+AC_DEFINE_UNQUOTED([MYSERVER_VERSION], ["${MYSERVER_VERSION}"], [The software
version])
AM_GNU_GETTEXT([external])
@@ -58,10 +63,6 @@ else
MAKE_DOC=yes
fi
-CFLAGS="$CFLAGS $_LT_AC_TAGVAR(lt_prog_compiler_pic, CXX)"
-CXXFLAGS="$CXXFLAGS $_LT_AC_TAGVAR(lt_prog_compiler_pic, CXX)"
-LDFLAGS="$LDFLAGS $_LT_AC_TAGVAR(lt_prog_compiler_pic, CXX)"
-
AC_ARG_ENABLE([ipv6], [--enable-ipv6 Build with IPv6 support],
enable_ipv6="yes", enable_ipv6="")
AC_ARG_ENABLE([tests], [--disable-tests Disable the tests suite],
@@ -110,7 +111,14 @@ case "${host}" in
;;
*)
dnl Looking for pthreads
- GNOME_PTHREAD_CHECK
+ PTHREAD_LIB=""
+ AC_CHECK_LIB(pthread, pthread_create, PTHREAD_LIB="-lpthread",
+ [AC_CHECK_LIB(pthreads, pthread_create,
PTHREAD_LIB="-lpthreads",
+ [AC_CHECK_LIB(c_r, pthread_create, PTHREAD_LIB="-lc_r",
+ [AC_CHECK_FUNC(pthread_create)]
+ )]
+ )]
+ )
if test x$PTHREAD_LIB = x; then
AC_MSG_ERROR([
*** This system appears to have no posix threads
@@ -118,6 +126,10 @@ case "${host}" in
])
fi
+
+
+ AC_SUBST(PTHREAD_LIB)
+
dnl Looking for dl
AC_SEARCH_LIBS([dlopen], [dl c], have_dl=yes)
diff --git a/myserver/depcomp b/myserver/depcomp
deleted file mode 100755
index 0d1c6db..0000000
--- a/myserver/depcomp
+++ /dev/null
@@ -1,423 +0,0 @@
-#! /bin/sh
-
-# depcomp - compile a program generating dependencies as side-effects
-# Copyright 1999, 2000 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <address@hidden>.
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
- echo "depcomp: Variables source, object and depmode must be set" 1>&2
- exit 1
-fi
-# `libtool' can also be set to `yes' or `no'.
-
-if test -z "$depfile"; then
- base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
- dir=`echo "$object" | sed 's,/.*$,/,'`
- if test "$dir" = "$object"; then
- dir=
- fi
- # FIXME: should be _deps on DOS.
- depfile="$dir.deps/$base"
-fi
-
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags. We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write. Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
- # HP compiler uses -M and no extra arg.
- gccflag=-M
- depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want. Yay! Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff. Hmm.
- "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- mv "$tmpdepfile" "$depfile"
- ;;
-
-gcc)
-## There are various ways to get dependency output from gcc. Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-## up in a subdir. Having to rename by hand is ugly.
-## (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-## than renaming).
- if test -z "$gccflag"; then
- gccflag=-MD,
- fi
- "$@" -Wp,"$gccflag$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
- sed -e 's/^[^:]*: / /' \
- -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header). We avoid this by adding
-## dummy dependencies for each header file. Too bad gcc doesn't do
-## this for us directly.
- tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'. On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-sgi)
- if test "$libtool" = yes; then
- "$@" "-Wp,-MDupdate,$tmpdepfile"
- else
- "$@" -MDupdate "$tmpdepfile"
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
-
- if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
- echo "$object : \\" > "$depfile"
-
- # Clip off the initial element (the dependent). Don't try to be
- # clever and replace this with sed code, as IRIX sed won't handle
- # lines with more than a fixed number of characters (4096 in
- # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like `#:fec' to the end of the
- # dependency line.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr '
-' ' ' >> $depfile
- echo >> $depfile
-
- # The second pass generates a dummy entry for each header file.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> $depfile
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-aix)
- # The C for AIX Compiler uses -M and outputs the dependencies
- # in a .u file. This file always lives in the current directory.
- # Also, the AIX compiler puts `$object:' at the start of each line;
- # $object doesn't have directory information.
- stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
- tmpdepfile="$stripped.u"
- outname="$stripped.o"
- if test "$libtool" = yes; then
- "$@" -Wc,-M
- else
- "$@" -M
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
-
- if test -f "$tmpdepfile"; then
- # Each line is of the form `foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
- sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in `foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
- if test "$libtool" = yes; then
- tmpdepfile1="$dir.libs/$base.lo.d"
- tmpdepfile2="$dir.libs/$base.d"
- "$@" -Wc,-MD
- else
- tmpdepfile1="$dir$base.o.d"
- tmpdepfile2="$dir$base.d"
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2"
- exit $stat
- fi
-
- if test -f "$tmpdepfile1"; then
- tmpdepfile="$tmpdepfile1"
- else
- tmpdepfile="$tmpdepfile2"
- fi
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a space and a tab in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-#nosideeffect)
- # This comment above is used by automake to tell side-effect
- # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
- # Important note: in order to support this mode, a compiler *must*
- # always write the proprocessed file to stdout, regardless of -o.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'. We will use -o /dev/null later,
- # however we can't do the remplacement now because
- # `-o $object' might simply not be used
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- test -z "$dashmflag" && dashmflag=-M
- "$@" -o /dev/null $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' >
"$tmpdepfile"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-dashXmstdout)
- # This case only exists to satisfy depend.m4. It is never actually
- # run, as this mode is specially recognized in the preamble.
- exit 1
- ;;
-
-makedepend)
- "$@" || exit $?
- # X makedepend
- shift
- cleared=no
- for arg in "$@"; do
- case $cleared in
- no)
- set ""; shift
- cleared=yes ;;
- esac
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift ;;
- -*)
- ;;
- *)
- set fnord "$@" "$arg"; shift ;;
- esac
- done
- obj_suffix="`echo $object | sed 's/^.*\././'`"
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile" "$tmpdepfile".bak
- ;;
-
-cpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the proprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- "$@" -E |
- sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- cat < "$tmpdepfile" >> "$depfile"
- sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvisualcpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the proprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- "$@" || exit $?
- IFS=" "
- for arg
- do
- case "$arg" in
- "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
- esac
- done
- "$@" -E |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p'
| sort | uniq > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >>
"$depfile"
- echo " " >> "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >>
"$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-none)
- exec "$@"
- ;;
-
-*)
- echo "Unknown depmode $depmode" 1>&2
- exit 1
- ;;
-esac
-
-exit 0
diff --git a/myserver/install-sh b/myserver/install-sh
deleted file mode 100755
index 4fbbae7..0000000
--- a/myserver/install-sh
+++ /dev/null
@@ -1,507 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2006-10-14.15
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" "" $nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-posix_glob=
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chmodcmd=$chmodprog
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-dstarg=
-no_target_directory=
-
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
- or: $0 [OPTION]... SRCFILES... DIRECTORY
- or: $0 [OPTION]... -t DIRECTORY SRCFILES...
- or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
--c (ignored)
--d create directories instead of installing files.
--g GROUP $chgrpprog installed files to GROUP.
--m MODE $chmodprog installed files to MODE.
--o USER $chownprog installed files to USER.
--s $stripprog installed files.
--t DIRECTORY install into DIRECTORY.
--T report an error if DSTFILE is a directory.
---help display this help and exit.
---version display version info and exit.
-
-Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
- case $1 in
- -c) shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- --help) echo "$usage"; exit $?;;
-
- -m) mode=$2
- shift
- shift
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd=$stripprog
- shift
- continue;;
-
- -t) dstarg=$2
- shift
- shift
- continue;;
-
- -T) no_target_directory=true
- shift
- continue;;
-
- --version) echo "$0 $scriptversion"; exit $?;;
-
- --) shift
- break;;
-
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
-
- *) break;;
- esac
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
- # When -d is used, all remaining arguments are directories to create.
- # When -t is used, the destination is already specified.
- # Otherwise, the last argument is the destination. Remove it from
address@hidden
- for arg
- do
- if test -n "$dstarg"; then
- # $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dstarg"
- shift # fnord
- fi
- shift # arg
- dstarg=$arg
- done
-fi
-
-if test $# -eq 0; then
- if test -z "$dir_arg"; then
- echo "$0: no input file specified." >&2
- exit 1
- fi
- # It's OK to call `install-sh -d' without argument.
- # This can happen when creating conditional directories.
- exit 0
-fi
-
-if test -z "$dir_arg"; then
- trap '(exit $?); exit' 1 2 13 15
-
- # Set umask so as not to create temps with too-generous modes.
- # However, 'strip' requires both read and write access to temps.
- case $mode in
- # Optimize common cases.
- *644) cp_umask=133;;
- *755) cp_umask=22;;
-
- *[0-7])
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw='% 200'
- fi
- cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
- *)
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw=,u+rw
- fi
- cp_umask=$mode$u_plus_rw;;
- esac
-fi
-
-for src
-do
- # Protect names starting with `-'.
- case $src in
- -*) src=./$src ;;
- esac
-
- if test -n "$dir_arg"; then
- dst=$src
- dstdir=$dst
- test -d "$dstdir"
- dstdir_status=$?
- else
-
- # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
- # might cause directories to be created, which would be especially bad
- # if $src (and thus $dsttmp) contains '*'.
- if test ! -f "$src" && test ! -d "$src"; then
- echo "$0: $src does not exist." >&2
- exit 1
- fi
-
- if test -z "$dstarg"; then
- echo "$0: no destination specified." >&2
- exit 1
- fi
-
- dst=$dstarg
- # Protect names starting with `-'.
- case $dst in
- -*) dst=./$dst ;;
- esac
-
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
- if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dstarg: Is a directory" >&2
- exit 1
- fi
- dstdir=$dst
- dst=$dstdir/`basename "$src"`
- dstdir_status=0
- else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
- test -d "$dstdir"
- dstdir_status=$?
- fi
- fi
-
- obsolete_mkdir_used=false
-
- if test $dstdir_status != 0; then
- case $posix_mkdir in
- '')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writeable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
- esac
-
- if
- $posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
- )
- then :
- else
-
- # The umask is ridiculous, or mkdir does not conform to POSIX,
- # or it failed possibly due to a race condition. Create the
- # directory the slow way, step by step, checking for races as we go.
-
- case $dstdir in
- /*) prefix=/ ;;
- -*) prefix=./ ;;
- *) prefix= ;;
- esac
-
- case $posix_glob in
- '')
- if (set -f) 2>/dev/null; then
- posix_glob=true
- else
- posix_glob=false
- fi ;;
- esac
-
- oIFS=$IFS
- IFS=/
- $posix_glob && set -f
- set fnord $dstdir
- shift
- $posix_glob && set +f
- IFS=$oIFS
-
- prefixes=
-
- for d
- do
- test -z "$d" && continue
-
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
- done
-
- if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
- fi
- fi
- fi
-
- if test -n "$dir_arg"; then
- { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
- { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
- test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
- else
-
- # Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
-
- # Trap to clean up those temp files at exit.
- trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
- # Copy the file name to the temp name.
- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
- # and set any options; do chmod last to preserve setuid bits.
- #
- # If any of these fail, we abort the whole thing. If we want to
- # ignore errors from any of these, just make sure not to ignore
- # errors from the above "$doit $cpprog $src $dsttmp" command.
- #
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
- && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
- # Now rename the file to the real destination.
- { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
- || {
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
-
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- if test -f "$dst"; then
- $doit $rmcmd -f "$dst" 2>/dev/null \
- || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
- && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
- || {
- echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- else
- :
- fi
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
- }
- } || exit 1
-
- trap '' 0
- fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
diff --git a/myserver/ltmain.sh b/myserver/ltmain.sh
deleted file mode 100755
index ac13f0a..0000000
--- a/myserver/ltmain.sh
+++ /dev/null
@@ -1,6928 +0,0 @@
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <address@hidden>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-basename="s,^.*/,,g"
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-# The name of this program:
-progname=`echo "$progpath" | $SED $basename`
-modename="$progname"
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.5.23a
-TIMESTAMP=" (1.1220.2.416 2006/10/24 20:18:28)"
-
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell, and then maybe $echo will work.
- exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit $EXIT_SUCCESS
-fi
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
- # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
- SP2NL='tr \040 \012'
- NL2SP='tr \015\012 \040\040'
- ;;
- *) # EBCDIC based system
- SP2NL='tr \100 \n'
- NL2SP='tr \r\n \100\100'
- ;;
-esac
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-do
- eval "if test \"\${$lt_var+set}\" = set; then
- save_$lt_var=\$$lt_var
- $lt_var=C
- export $lt_var
- fi"
-done
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" $lt_nl"
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- $echo "$modename: not configured to build any kind of library" 1>&2
- $echo "Fatal configuration error. See the $PACKAGE docs for more
information." 1>&2
- exit $EXIT_FAILURE
-fi
-
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-duplicate_deps=no
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
-
-#####################################
-# Shell function definitions:
-# This seems to be the best place for them
-
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible. If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
-{
- my_template="${TMPDIR-/tmp}/${1-$progname}"
-
- if test "$run" = ":"; then
- # Return a directory name, but don't create it in dry-run mode
- my_tmpdir="${my_template}-$$"
- else
-
- # If mktemp works, use that first and foremost
- my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-
- if test ! -d "$my_tmpdir"; then
- # Failing that, at least try and use $RANDOM to avoid a race
- my_tmpdir="${my_template}-${RANDOM-0}$$"
-
- save_mktempdir_umask=`umask`
- umask 0077
- $mkdir "$my_tmpdir"
- umask $save_mktempdir_umask
- fi
-
- # If we're not in dry-run mode, bomb out on failure
- test -d "$my_tmpdir" || {
- $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
- exit $EXIT_FAILURE
- }
- fi
-
- $echo "X$my_tmpdir" | $Xsed
-}
-
-
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
-{
- win32_libid_type="unknown"
- win32_fileres=`file -L $1 2>/dev/null`
- case $win32_fileres in
- *ar\ archive\ import\ library*) # definitely import
- win32_libid_type="x86 archive import"
- ;;
- *ar\ archive*) # could be an import, or static
- if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
- $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
- win32_nmres=`eval $NM -f posix -A $1 | \
- $SED -n -e '1,100{
- / I /{
- s,.*,import,
- p
- q
- }
- }'`
- case $win32_nmres in
- import*) win32_libid_type="x86 archive import";;
- *) win32_libid_type="x86 archive static";;
- esac
- fi
- ;;
- *DLL*)
- win32_libid_type="x86 DLL"
- ;;
- *executable*) # but shell scripts are "executable" too...
- case $win32_fileres in
- *MS\ Windows\ PE\ Intel*)
- win32_libid_type="x86 DLL"
- ;;
- esac
- ;;
- esac
- $echo $win32_libid_type
-}
-
-
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
-{
- if test -n "$available_tags" && test -z "$tagname"; then
- CC_quoted=
- for arg in $CC; do
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- CC_quoted="$CC_quoted $arg"
- done
- case $@ in
- # Blanks in the command may have been stripped by the calling shell,
- # but not from the CC environment variable when configure was run.
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"*
| "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
- # Blanks at the start of $base_compile will cause this to fail
- # if we don't check for them as well.
- *)
- for z in $available_tags; do
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" >
/dev/null; then
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^#
### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
- CC_quoted=
- for arg in $CC; do
- # Double-quote args containing other shell metacharacters.
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- CC_quoted="$CC_quoted $arg"
- done
- case "$@ " in
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | "
$CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted`
"*)
- # The compiler in the base compile command matches
- # the one in the tagged configuration.
- # Assume this is the tagged configuration we want.
- tagname=$z
- break
- ;;
- esac
- fi
- done
- # If $tagname still isn't set, then no tagged configuration
- # was found and let the user know that the "--tag" command
- # line option must be used.
- if test -z "$tagname"; then
- $echo "$modename: unable to infer tagged configuration"
- $echo "$modename: specify a tag with \`--tag'" 1>&2
- exit $EXIT_FAILURE
-# else
-# $echo "$modename: using $tagname tagged configuration"
- fi
- ;;
- esac
- fi
-}
-
-
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
- f_ex_an_ar_dir="$1"; shift
- f_ex_an_ar_oldlib="$1"
-
- $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
- $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
- if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: ERROR: object name conflicts:
$f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
- exit $EXIT_FAILURE
- fi
-}
-
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
-{
- my_gentop="$1"; shift
- my_oldlibs=${1+"$@"}
- my_oldobjs=""
- my_xlib=""
- my_xabs=""
- my_xdir=""
- my_status=""
-
- $show "${rm}r $my_gentop"
- $run ${rm}r "$my_gentop"
- $show "$mkdir $my_gentop"
- $run $mkdir "$my_gentop"
- my_status=$?
- if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
- exit $my_status
- fi
-
- for my_xlib in $my_oldlibs; do
- # Extract the objects.
- case $my_xlib in
- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
- *) my_xabs=`pwd`"/$my_xlib" ;;
- esac
- my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
- my_xlib_u=$my_xlib
- while :; do
- case " $extracted_archives " in
- *" $my_xlib_u "*)
- extracted_serial=`expr $extracted_serial + 1`
- my_xlib_u=lt$extracted_serial-$my_xlib ;;
- *) break ;;
- esac
- done
- extracted_archives="$extracted_archives $my_xlib_u"
- my_xdir="$my_gentop/$my_xlib_u"
-
- $show "${rm}r $my_xdir"
- $run ${rm}r "$my_xdir"
- $show "$mkdir $my_xdir"
- $run $mkdir "$my_xdir"
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
- exit $exit_status
- fi
- case $host in
- *-darwin*)
- $show "Extracting $my_xabs"
- # Do not bother doing anything if just a dry run
- if test -z "$run"; then
- darwin_orig_dir=`pwd`
- cd $my_xdir || exit $?
- darwin_archive=$my_xabs
- darwin_curdir=`pwd`
- darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
- darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP
Architectures 2>/dev/null`
- if test -n "$darwin_arches"; then
- darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
- darwin_arch=
- $show "$darwin_base_archive has multiple architectures
$darwin_arches"
- for darwin_arch in $darwin_arches ; do
- mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- lipo -thin $darwin_arch -output
"unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
"${darwin_archive}"
- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- func_extract_an_archive "`pwd`" "${darwin_base_archive}"
- cd "$darwin_curdir"
- $rm
"unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
- done # $darwin_arches
- ## Okay now we have a bunch of thin objects, gotta fatten them up :)
- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name
\*.lo -print| xargs basename | sort -u | $NL2SP`
- darwin_file=
- darwin_files=
- for darwin_file in $darwin_filelist; do
- darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
- lipo -create -output "$darwin_file" $darwin_files
- done # $darwin_filelist
- ${rm}r unfat-$$
- cd "$darwin_orig_dir"
- else
- cd "$darwin_orig_dir"
- func_extract_an_archive "$my_xdir" "$my_xabs"
- fi # $darwin_arches
- fi # $run
- ;;
- *)
- func_extract_an_archive "$my_xdir" "$my_xabs"
- ;;
- esac
- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name
\*.lo -print | $NL2SP`
- done
- func_extract_archives_result="$my_oldobjs"
-}
-# End of Shell function definitions
-#####################################
-
-# Darwin sucks
-eval std_shrext=\"$shrext_cmds\"
-
-disable_libs=no
-
-# Parse our command line options once, thoroughly.
-while test "$#" -gt 0
-do
- arg="$1"
- shift
-
- case $arg in
- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
- *) optarg= ;;
- esac
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case $prev in
- execute_dlfiles)
- execute_dlfiles="$execute_dlfiles $arg"
- ;;
- tag)
- tagname="$arg"
- preserve_args="${preserve_args}=$arg"
-
- # Check whether tagname contains only valid characters
- case $tagname in
- *[!-_A-Za-z0-9,/]*)
- $echo "$progname: invalid tag name: $tagname" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- case $tagname in
- CC)
- # Don't test for the "default" C tag, as we know, it's there, but
- # not specially marked.
- ;;
- *)
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" >
/dev/null; then
- taglist="$taglist $tagname"
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG:
'$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
- else
- $echo "$progname: ignoring unknown tag $tagname" 1>&2
- fi
- ;;
- esac
- ;;
- *)
- eval "$prev=\$arg"
- ;;
- esac
-
- prev=
- prevopt=
- continue
- fi
-
- # Have we seen a non-optional argument yet?
- case $arg in
- --help)
- show_help=yes
- ;;
-
- --version)
- echo "\
-
-$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
-
-Copyright (C) 2006 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
- exit $?
- ;;
-
- --config)
- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL
CONFIG/,$d' $progpath
- # Now print the configurations for the tags.
- for tagname in $taglist; do
- ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END
LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
- done
- exit $?
- ;;
-
- --debug)
- $echo "$progname: enabling shell trace mode"
- set -x
- preserve_args="$preserve_args $arg"
- ;;
-
- --dry-run | -n)
- run=:
- ;;
-
- --features)
- $echo "host: $host"
- if test "$build_libtool_libs" = yes; then
- $echo "enable shared libraries"
- else
- $echo "disable shared libraries"
- fi
- if test "$build_old_libs" = yes; then
- $echo "enable static libraries"
- else
- $echo "disable static libraries"
- fi
- exit $?
- ;;
-
- --finish) mode="finish" ;;
-
- --mode) prevopt="--mode" prev=mode ;;
- --mode=*) mode="$optarg" ;;
-
- --preserve-dup-deps) duplicate_deps="yes" ;;
-
- --quiet | --silent)
- show=:
- preserve_args="$preserve_args $arg"
- ;;
-
- --tag)
- prevopt="--tag"
- prev=tag
- preserve_args="$preserve_args --tag"
- ;;
- --tag=*)
- set tag "$optarg" ${1+"$@"}
- shift
- prev=tag
- preserve_args="$preserve_args --tag"
- ;;
-
- -dlopen)
- prevopt="-dlopen"
- prev=execute_dlfiles
- ;;
-
- -*)
- $echo "$modename: unrecognized option \`$arg'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
-
- *)
- nonopt="$arg"
- break
- ;;
- esac
-done
-
-if test -n "$prevopt"; then
- $echo "$modename: option \`$prevopt' requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
-fi
-
-case $disable_libs in
-no)
- ;;
-shared)
- build_libtool_libs=no
- build_old_libs=yes
- ;;
-static)
- build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;;
esac`
- ;;
-esac
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end. This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-if test -z "$show_help"; then
-
- # Infer the operation mode.
- if test -z "$mode"; then
- $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
- $echo "*** Future versions of Libtool will require --mode=MODE be
specified." 1>&2
- case $nonopt in
- *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
- mode=link
- for arg
- do
- case $arg in
- -c)
- mode=compile
- break
- ;;
- esac
- done
- ;;
- *db | *dbx | *strace | *truss)
- mode=execute
- ;;
- *install*|cp|mv)
- mode=install
- ;;
- *rm)
- mode=uninstall
- ;;
- *)
- # If we have no mode, but dlfiles were specified, then do execute mode.
- test -n "$execute_dlfiles" && mode=execute
-
- # Just use the default operation mode.
- if test -z "$mode"; then
- if test -n "$nonopt"; then
- $echo "$modename: warning: cannot infer operation mode from
\`$nonopt'" 1>&2
- else
- $echo "$modename: warning: cannot infer operation mode without
MODE-ARGS" 1>&2
- fi
- fi
- ;;
- esac
- fi
-
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$execute_dlfiles" && test "$mode" != execute; then
- $echo "$modename: unrecognized option \`-dlopen'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$modename --help --mode=$mode' for more information."
-
- # These modes are in order of execution frequency so that they run quickly.
- case $mode in
- # libtool compile mode
- compile)
- modename="$modename: compile"
- # Get the compilation command and the source file.
- base_compile=
- srcfile="$nonopt" # always keep a non-empty value in "srcfile"
- suppress_opt=yes
- suppress_output=
- arg_mode=normal
- libobj=
- later=
-
- for arg
- do
- case $arg_mode in
- arg )
- # do not "continue". Instead, add this to base_compile
- lastarg="$arg"
- arg_mode=normal
- ;;
-
- target )
- libobj="$arg"
- arg_mode=normal
- continue
- ;;
-
- normal )
- # Accept any command-line options.
- case $arg in
- -o)
- if test -n "$libobj" ; then
- $echo "$modename: you cannot specify \`-o' more than once" 1>&2
- exit $EXIT_FAILURE
- fi
- arg_mode=target
- continue
- ;;
-
- -static | -prefer-pic | -prefer-non-pic)
- later="$later $arg"
- continue
- ;;
-
- -no-suppress)
- suppress_opt=no
- continue
- ;;
-
- -Xcompiler)
- arg_mode=arg # the next one goes into the "base_compile" arg list
- continue # The current "srcfile" will either be retained or
- ;; # replaced later. I would guess that would be a bug.
-
- -Wc,*)
- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
- lastarg=
- save_ifs="$IFS"; IFS=','
- for arg in $args; do
- IFS="$save_ifs"
-
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- lastarg="$lastarg $arg"
- done
- IFS="$save_ifs"
- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
-
- # Add the arguments to base_compile.
- base_compile="$base_compile $lastarg"
- continue
- ;;
-
- * )
- # Accept the current argument as the source file.
- # The previous "srcfile" becomes the current argument.
- #
- lastarg="$srcfile"
- srcfile="$arg"
- ;;
- esac # case $arg
- ;;
- esac # case $arg_mode
-
- # Aesthetically quote the previous argument.
- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
- case $lastarg in
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, and some SunOS ksh mistreat backslash-escaping
- # in scan sets (worked around with variable expansion),
- # and furthermore cannot handle '|' '&' '(' ')' in scan sets
- # at all, so we specify them separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- lastarg="\"$lastarg\""
- ;;
- esac
-
- base_compile="$base_compile $lastarg"
- done # for arg
-
- case $arg_mode in
- arg)
- $echo "$modename: you must specify an argument for -Xcompile"
- exit $EXIT_FAILURE
- ;;
- target)
- $echo "$modename: you must specify a target with \`-o'" 1>&2
- exit $EXIT_FAILURE
- ;;
- *)
- # Get the name of the library object.
- [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
- ;;
- esac
-
- # Recognize several different file suffixes.
- # If the user specifies -o file.o, it is replaced with file.lo
- xform='[cCFSifmso]'
- case $libobj in
- *.ada) xform=ada ;;
- *.adb) xform=adb ;;
- *.ads) xform=ads ;;
- *.asm) xform=asm ;;
- *.c++) xform=c++ ;;
- *.cc) xform=cc ;;
- *.ii) xform=ii ;;
- *.class) xform=class ;;
- *.cpp) xform=cpp ;;
- *.cxx) xform=cxx ;;
- *.f90) xform=f90 ;;
- *.for) xform=for ;;
- *.java) xform=java ;;
- *.obj) xform=obj ;;
- esac
-
- libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
- case $libobj in
- *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
- *)
- $echo "$modename: cannot determine name of library object from
\`$libobj'" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- func_infer_tag $base_compile
-
- for arg in $later; do
- case $arg in
- -static)
- build_old_libs=yes
- continue
- ;;
-
- -prefer-pic)
- pic_mode=yes
- continue
- ;;
-
- -prefer-non-pic)
- pic_mode=no
- continue
- ;;
- esac
- done
-
- qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
- case $qlibobj in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qlibobj="\"$qlibobj\"" ;;
- esac
- test "X$libobj" != "X$qlibobj" \
- && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \
- && $echo "$modename: libobj name \`$libobj' may not contain shell
special characters."
- objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$obj"; then
- xdir=
- else
- xdir=$xdir/
- fi
- lobj=${xdir}$objdir/$objname
-
- if test -z "$base_compile"; then
- $echo "$modename: you must specify a compilation command" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Delete any leftover library objects.
- if test "$build_old_libs" = yes; then
- removelist="$obj $lobj $libobj ${libobj}T"
- else
- removelist="$lobj $libobj ${libobj}T"
- fi
-
- $run $rm $removelist
- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-
- # On Cygwin there's no "real" PIC flag so we must build both object types
- case $host_os in
- cygwin* | mingw* | pw32* | os2*)
- pic_mode=default
- ;;
- esac
- if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
- # non-PIC code in shared libraries is not supported
- pic_mode=default
- fi
-
- # Calculate the filename of the output object if compiler does
- # not support -o with -c
- if test "$compiler_c_o" = no; then
- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e
's%\.[^.]*$%%'`.${objext}
- lockfile="$output_obj.lock"
- removelist="$removelist $output_obj $lockfile"
- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
- else
- output_obj=
- need_locks=no
- lockfile=
- fi
-
- # Lock this critical section if it is needed
- # We use this script file to make the link, it avoids creating a new file
- if test "$need_locks" = yes; then
- until $run ln "$progpath" "$lockfile" 2>/dev/null; do
- $show "Waiting for $lockfile to be removed"
- sleep 2
- done
- elif test "$need_locks" = warn; then
- if test -f "$lockfile"; then
- $echo "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
- $echo "$srcfile" > "$lockfile"
- fi
-
- if test -n "$fix_srcfile_path"; then
- eval srcfile=\"$fix_srcfile_path\"
- fi
- qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
- case $qsrcfile in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qsrcfile="\"$qsrcfile\"" ;;
- esac
-
- $run $rm "$libobj" "${libobj}T"
-
- # Create a libtool object file (analogous to a ".la" file),
- # but don't create it if we're doing a dry run.
- test -z "$run" && cat > ${libobj}T <<EOF
-# $libobj - a libtool object file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-EOF
-
- # Only build a PIC object if we are building libtool libraries.
- if test "$build_libtool_libs" = yes; then
- # Without this assignment, base_compile gets emptied.
- fbsd_hideous_sh_bug=$base_compile
-
- if test "$pic_mode" != no; then
- command="$base_compile $qsrcfile $pic_flag"
- else
- # Don't build PIC code
- command="$base_compile $qsrcfile"
- fi
-
- if test ! -d "${xdir}$objdir"; then
- $show "$mkdir ${xdir}$objdir"
- $run $mkdir ${xdir}$objdir
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
- exit $exit_status
- fi
- fi
-
- if test -z "$output_obj"; then
- # Place PIC objects in $objdir
- command="$command -o $lobj"
- fi
-
- $run $rm "$lobj" "$output_obj"
-
- $show "$command"
- if $run eval "$command"; then :
- else
- test -n "$output_obj" && $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- if test "$need_locks" = warn &&
- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
- $echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- # Just move the object if needed, then go on to compile the next one
- if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
- $show "$mv $output_obj $lobj"
- if $run $mv $output_obj $lobj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
-
- # Append the name of the PIC object to the libtool object file.
- test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object='$objdir/$objname'
-
-EOF
-
- # Allow error messages only from the first compilation.
- if test "$suppress_opt" = yes; then
- suppress_output=' >/dev/null 2>&1'
- fi
- else
- # No PIC object so indicate it doesn't exist in the libtool
- # object file.
- test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object=none
-
-EOF
- fi
-
- # Only build a position-dependent object if we build old libraries.
- if test "$build_old_libs" = yes; then
- if test "$pic_mode" != yes; then
- # Don't build PIC code
- command="$base_compile $qsrcfile"
- else
- command="$base_compile $qsrcfile $pic_flag"
- fi
- if test "$compiler_c_o" = yes; then
- command="$command -o $obj"
- fi
-
- # Suppress compiler output if we already did a PIC compilation.
- command="$command$suppress_output"
- $run $rm "$obj" "$output_obj"
- $show "$command"
- if $run eval "$command"; then :
- else
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- if test "$need_locks" = warn &&
- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
- $echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $run $rm $removelist
- exit $EXIT_FAILURE
- fi
-
- # Just move the object if needed
- if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
- $show "$mv $output_obj $obj"
- if $run $mv $output_obj $obj; then :
- else
- error=$?
- $run $rm $removelist
- exit $error
- fi
- fi
-
- # Append the name of the non-PIC object the libtool object file.
- # Only append if the libtool object file exists.
- test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object='$objname'
-
-EOF
- else
- # Append the name of the non-PIC object the libtool object file.
- # Only append if the libtool object file exists.
- test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object=none
-
-EOF
- fi
-
- $run $mv "${libobj}T" "${libobj}"
-
- # Unlock the critical section if it was locked
- if test "$need_locks" != no; then
- $run $rm "$lockfile"
- fi
-
- exit $EXIT_SUCCESS
- ;;
-
- # libtool link mode
- link | relink)
- modename="$modename: link"
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- # It is impossible to link a dll without this setting, and
- # we shouldn't force the makefile maintainer to figure out
- # which system we are compiling for in order to pass an extra
- # flag for every libtool invocation.
- # allow_undefined=no
-
- # FIXME: Unfortunately, there are problems with the above when trying
- # to make a dll which has undefined symbols, in which case not
- # even a static library is built. For now, we need to specify
- # -no-undefined on the libtool link line when we can be certain
- # that all symbols are satisfied, otherwise we get a static library.
- allow_undefined=yes
- ;;
- *)
- allow_undefined=yes
- ;;
- esac
- libtool_args="$nonopt"
- base_compile="$nonopt $@"
- compile_command="$nonopt"
- finalize_command="$nonopt"
-
- compile_rpath=
- finalize_rpath=
- compile_shlibpath=
- finalize_shlibpath=
- convenience=
- old_convenience=
- deplibs=
- old_deplibs=
- compiler_flags=
- linker_flags=
- dllsearchpath=
- lib_search_path=`pwd`
- inst_prefix_dir=
-
- avoid_version=no
- dlfiles=
- dlprefiles=
- dlself=no
- export_dynamic=no
- export_symbols=
- export_symbols_regex=
- generated=
- libobjs=
- ltlibs=
- module=no
- no_install=no
- objs=
- non_pic_objects=
- notinst_path= # paths that contain not-installed libtool libraries
- precious_files_regex=
- prefer_static_libs=no
- preload=no
- prev=
- prevarg=
- release=
- rpath=
- xrpath=
- perm_rpath=
- temp_rpath=
- thread_safe=no
- vinfo=
- vinfo_number=no
-
- func_infer_tag $base_compile
-
- # We need to know -static, to get the right output filenames.
- for arg
- do
- case $arg in
- -all-static | -static | -static-libtool-libs)
- case $arg in
- -all-static)
- if test "$build_libtool_libs" = yes && test -z "$link_static_flag";
then
- $echo "$modename: warning: complete static linking is impossible in
this configuration" 1>&2
- fi
- if test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=yes
- ;;
- -static)
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=built
- ;;
- -static-libtool-libs)
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=yes
- ;;
- esac
- build_libtool_libs=no
- build_old_libs=yes
- break
- ;;
- esac
- done
-
- # See if our shared archives depend on static archives.
- test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
- # Go through the arguments, transforming them on the way.
- while test "$#" -gt 0; do
- arg="$1"
- shift
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite:
skip nested quoting test
- ;;
- *) qarg=$arg ;;
- esac
- libtool_args="$libtool_args $qarg"
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case $prev in
- output)
- compile_command="$compile_command @OUTPUT@"
- finalize_command="$finalize_command @OUTPUT@"
- ;;
- esac
-
- case $prev in
- dlfiles|dlprefiles)
- if test "$preload" = no; then
- # Add the symbol object into the linking commands.
- compile_command="$compile_command @SYMFILE@"
- finalize_command="$finalize_command @SYMFILE@"
- preload=yes
- fi
- case $arg in
- *.la | *.lo) ;; # We handle these cases below.
- force)
- if test "$dlself" = no; then
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- self)
- if test "$prev" = dlprefiles; then
- dlself=yes
- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
- dlself=yes
- else
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- *)
- if test "$prev" = dlfiles; then
- dlfiles="$dlfiles $arg"
- else
- dlprefiles="$dlprefiles $arg"
- fi
- prev=
- continue
- ;;
- esac
- ;;
- expsyms)
- export_symbols="$arg"
- if test ! -f "$arg"; then
- $echo "$modename: symbol file \`$arg' does not exist"
- exit $EXIT_FAILURE
- fi
- prev=
- continue
- ;;
- expsyms_regex)
- export_symbols_regex="$arg"
- prev=
- continue
- ;;
- inst_prefix)
- inst_prefix_dir="$arg"
- prev=
- continue
- ;;
- precious_regex)
- precious_files_regex="$arg"
- prev=
- continue
- ;;
- release)
- release="-$arg"
- prev=
- continue
- ;;
- objectlist)
- if test -f "$arg"; then
- save_arg=$arg
- moreargs=
- for fil in `cat $save_arg`
- do
-# moreargs="$moreargs $fil"
- arg=$fil
- # A libtool-controlled object.
-
- # Check to see that this really is a libtool object.
- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE")
>/dev/null 2>&1; then
- pic_object=
- non_pic_object=
-
- # Read the .lo file
- # If there is no directory component, then add one.
- case $arg in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
- esac
-
- if test -z "$pic_object" || \
- test -z "$non_pic_object" ||
- test "$pic_object" = none && \
- test "$non_pic_object" = none; then
- $echo "$modename: cannot find name of object for \`$arg'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- if test "$pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test
"$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to
preload.
- prev=dlprefiles
- fi
- fi
-
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
- prev=
- fi
-
- # A PIC object.
- libobjs="$libobjs $pic_object"
- arg="$pic_object"
- fi
-
- # Non-PIC object.
- if test "$non_pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
-
- # A standard non-PIC object
- non_pic_objects="$non_pic_objects $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
- fi
- else
- # If the PIC object exists, use it instead.
- # $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- else
- # Only an error if not doing a dry-run.
- if test -z "$run"; then
- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
- exit $EXIT_FAILURE
- else
- # Dry-run case.
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e
"$lo2o"`
- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
- libobjs="$libobjs $pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- fi
- done
- else
- $echo "$modename: link input file \`$save_arg' does not exist"
- exit $EXIT_FAILURE
- fi
- arg=$save_arg
- prev=
- continue
- ;;
- rpath | xrpath)
- # We need an absolute path.
- case $arg in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- if test "$prev" = rpath; then
- case "$rpath " in
- *" $arg "*) ;;
- *) rpath="$rpath $arg" ;;
- esac
- else
- case "$xrpath " in
- *" $arg "*) ;;
- *) xrpath="$xrpath $arg" ;;
- esac
- fi
- prev=
- continue
- ;;
- xcompiler)
- compiler_flags="$compiler_flags $qarg"
- prev=
- compile_command="$compile_command $qarg"
- finalize_command="$finalize_command $qarg"
- continue
- ;;
- xlinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $wl$qarg"
- prev=
- compile_command="$compile_command $wl$qarg"
- finalize_command="$finalize_command $wl$qarg"
- continue
- ;;
- xcclinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $qarg"
- prev=
- compile_command="$compile_command $qarg"
- finalize_command="$finalize_command $qarg"
- continue
- ;;
- shrext)
- shrext_cmds="$arg"
- prev=
- continue
- ;;
- darwin_framework|darwin_framework_skip)
- test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags
$arg"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- prev=
- continue
- ;;
- *)
- eval "$prev=\"\$arg\""
- prev=
- continue
- ;;
- esac
- fi # test -n "$prev"
-
- prevarg="$arg"
-
- case $arg in
- -all-static)
- if test -n "$link_static_flag"; then
- compile_command="$compile_command $link_static_flag"
- finalize_command="$finalize_command $link_static_flag"
- fi
- continue
- ;;
-
- -allow-undefined)
- # FIXME: remove this flag sometime in the future.
- $echo "$modename: \`-allow-undefined' is deprecated because it is the
default" 1>&2
- continue
- ;;
-
- -avoid-version)
- avoid_version=yes
- continue
- ;;
-
- -dlopen)
- prev=dlfiles
- continue
- ;;
-
- -dlpreopen)
- prev=dlprefiles
- continue
- ;;
-
- -export-dynamic)
- export_dynamic=yes
- continue
- ;;
-
- -export-symbols | -export-symbols-regex)
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: more than one -exported-symbols argument is not
allowed"
- exit $EXIT_FAILURE
- fi
- if test "X$arg" = "X-export-symbols"; then
- prev=expsyms
- else
- prev=expsyms_regex
- fi
- continue
- ;;
-
- -framework|-arch|-isysroot)
- case " $CC " in
- *" ${arg} ${1} "* | *" ${arg} ${1} "*)
- prev=darwin_framework_skip ;;
- *) compiler_flags="$compiler_flags $arg"
- prev=darwin_framework ;;
- esac
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- continue
- ;;
-
- -inst-prefix-dir)
- prev=inst_prefix
- continue
- ;;
-
- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
- # so, if we see these flags be careful not to treat them like -L
- -L[A-Z][A-Z]*:*)
- case $with_gcc/$host in
- no/*-*-irix* | /*-*-irix*)
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- ;;
- esac
- continue
- ;;
-
- -L*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: cannot determine absolute directory name of
\`$dir'" 1>&2
- absdir="$dir"
- notinst_path="$notinst_path $dir"
- fi
- dir="$absdir"
- ;;
- esac
- case "$deplibs " in
- *" -L$dir "*) ;;
- *)
- deplibs="$deplibs -L$dir"
- lib_search_path="$lib_search_path $dir"
- ;;
- esac
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
- case :$dllsearchpath: in
- *":$dir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$dir";;
- esac
- case :$dllsearchpath: in
- *":$testbindir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$testbindir";;
- esac
- ;;
- esac
- continue
- ;;
-
- -l*)
- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
- # These systems don't actually have a C or math library (as such)
- continue
- ;;
- *-*-os2*)
- # These systems don't actually have a C library (as such)
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc due to us having libc/libc_r.
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C and math libraries are in the System framework
- deplibs="$deplibs -framework System"
- continue
- ;;
- *-*-sco3.2v5* | *-*-sco5v6*)
- # Causes problems with __ctype
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
- # Compiler inserts libc in the correct place for threads to work
- test "X$arg" = "X-lc" && continue
- ;;
- esac
- elif test "X$arg" = "X-lc_r"; then
- case $host in
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc_r directly, use -pthread flag.
- continue
- ;;
- esac
- fi
- deplibs="$deplibs $arg"
- continue
- ;;
-
- # Tru64 UNIX uses -model [arg] to determine the layout of C++
- # classes, name mangling, and exception handling.
- -model)
- compile_command="$compile_command $arg"
- compiler_flags="$compiler_flags $arg"
- finalize_command="$finalize_command $arg"
- prev=xcompiler
- continue
- ;;
-
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
- compiler_flags="$compiler_flags $arg"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- continue
- ;;
-
- -module)
- module=yes
- continue
- ;;
-
- # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
- # -r[0-9][0-9]* specifies the processor on the SGI compiler
- # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
- # +DA*, +DD* enable 64-bit mode on the HP compiler
- # -q* pass through compiler args for the IBM compiler
- # -m* pass through architecture-specific compiler args for GCC
- # -m*, -t[45]*, -txscale* pass through architecture-specific
- # compiler args for GCC
- # -pg, --coverage pass through profiling flag for GCC
- # -F/path gives path to uninstalled frameworks, gcc on darwin
- # @file GCC response files
- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
- -t[45]*|-txscale*|-pg|--coverage|-F*|@*)
-
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- compiler_flags="$compiler_flags $arg"
- continue
- ;;
-
- -shrext)
- prev=shrext
- continue
- ;;
-
- -no-fast-install)
- fast_install=no
- continue
- ;;
-
- -no-install)
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- # The PATH hackery in wrapper scripts is required on Windows
- # in order for the loader to find any dlls it needs.
- $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
- $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
- fast_install=no
- ;;
- *) no_install=yes ;;
- esac
- continue
- ;;
-
- -no-undefined)
- allow_undefined=no
- continue
- ;;
-
- -objectlist)
- prev=objectlist
- continue
- ;;
-
- -o) prev=output ;;
-
- -precious-files-regex)
- prev=precious_regex
- continue
- ;;
-
- -release)
- prev=release
- continue
- ;;
-
- -rpath)
- prev=rpath
- continue
- ;;
-
- -R)
- prev=xrpath
- continue
- ;;
-
- -R*)
- dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- $echo "$modename: only absolute run-paths are allowed" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- case "$xrpath " in
- *" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
- esac
- continue
- ;;
-
- -static | -static-libtool-libs)
- # The effects of -static are defined in a previous loop.
- # We used to do the same as -all-static on platforms that
- # didn't have a PIC flag, but the assumption that the effects
- # would be equivalent was wrong. It would break on at least
- # Digital Unix and AIX.
- continue
- ;;
-
- -thread-safe)
- thread_safe=yes
- continue
- ;;
-
- -version-info)
- prev=vinfo
- continue
- ;;
- -version-number)
- prev=vinfo
- vinfo_number=yes
- continue
- ;;
-
- -Wc,*)
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
- arg=
- save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- case $flag in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- flag="\"$flag\""
- ;;
- esac
- arg="$arg $wl$flag"
- compiler_flags="$compiler_flags $flag"
- done
- IFS="$save_ifs"
- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
- ;;
-
- -Wl,*)
- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
- arg=
- save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- case $flag in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- flag="\"$flag\""
- ;;
- esac
- arg="$arg $wl$flag"
- compiler_flags="$compiler_flags $wl$flag"
- linker_flags="$linker_flags $flag"
- done
- IFS="$save_ifs"
- arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
- ;;
-
- -Xcompiler)
- prev=xcompiler
- continue
- ;;
-
- -Xlinker)
- prev=xlinker
- continue
- ;;
-
- -XCClinker)
- prev=xcclinker
- continue
- ;;
-
- # Some other compiler flag.
- -* | +*)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- ;;
-
- *.$objext)
- # A standard object.
- objs="$objs $arg"
- ;;
-
- *.lo)
- # A libtool-controlled object.
-
- # Check to see that this really is a libtool object.
- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null
2>&1; then
- pic_object=
- non_pic_object=
-
- # Read the .lo file
- # If there is no directory component, then add one.
- case $arg in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
- esac
-
- if test -z "$pic_object" || \
- test -z "$non_pic_object" ||
- test "$pic_object" = none && \
- test "$non_pic_object" = none; then
- $echo "$modename: cannot find name of object for \`$arg'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- if test "$pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" =
yes; then
- dlfiles="$dlfiles $pic_object"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
- prev=
- fi
-
- # A PIC object.
- libobjs="$libobjs $pic_object"
- arg="$pic_object"
- fi
-
- # Non-PIC object.
- if test "$non_pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
-
- # A standard non-PIC object
- non_pic_objects="$non_pic_objects $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
- fi
- else
- # If the PIC object exists, use it instead.
- # $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- else
- # Only an error if not doing a dry-run.
- if test -z "$run"; then
- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
- exit $EXIT_FAILURE
- else
- # Dry-run case.
-
- # Extract subdirectory from the argument.
- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$xdir" = "X$arg"; then
- xdir=
- else
- xdir="$xdir/"
- fi
-
- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
- libobjs="$libobjs $pic_object"
- non_pic_objects="$non_pic_objects $non_pic_object"
- fi
- fi
- ;;
-
- *.$libext)
- # An archive.
- deplibs="$deplibs $arg"
- old_deplibs="$old_deplibs $arg"
- continue
- ;;
-
- *.la)
- # A libtool-controlled library.
-
- if test "$prev" = dlfiles; then
- # This library was specified with -dlopen.
- dlfiles="$dlfiles $arg"
- prev=
- elif test "$prev" = dlprefiles; then
- # The library was specified with -dlpreopen.
- dlprefiles="$dlprefiles $arg"
- prev=
- else
- deplibs="$deplibs $arg"
- fi
- continue
- ;;
-
- # Some other compiler argument.
- *)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- ;;
- esac # arg
-
- # Now actually substitute the argument into the commands.
- if test -n "$arg"; then
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
- done # argument parsing loop
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec";
then
- eval arg=\"$export_dynamic_flag_spec\"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
-
- oldlibs=
- # calculate the name of the file, without its directory
- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
- libobjs_save="$libobjs"
-
- if test -n "$shlibpath_var"; then
- # get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e
\'s/:/ /g\'\`
- else
- shlib_search_path=
- fi
- eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$output_objdir" = "X$output"; then
- output_objdir="$objdir"
- else
- output_objdir="$output_objdir/$objdir"
- fi
- # Create the object directory.
- if test ! -d "$output_objdir"; then
- $show "$mkdir $output_objdir"
- $run $mkdir $output_objdir
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
- exit $exit_status
- fi
- fi
-
- # Determine the type of output
- case $output in
- "")
- $echo "$modename: you must specify an output file" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- *.$libext) linkmode=oldlib ;;
- *.lo | *.$objext) linkmode=obj ;;
- *.la) linkmode=lib ;;
- *) linkmode=prog ;; # Anything else should be a program.
- esac
-
- case $host in
- *cygwin* | *mingw* | *pw32*)
- # don't eliminate duplications in $postdeps and $predeps
- duplicate_compiler_generated_deps=yes
- ;;
- *)
- duplicate_compiler_generated_deps=$duplicate_deps
- ;;
- esac
- specialdeplibs=
-
- libs=
- # Find all interdependent deplibs by searching for libraries
- # that are linked more than once (e.g. -la -lb -la)
- for deplib in $deplibs; do
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- libs="$libs $deplib"
- done
-
- if test "$linkmode" = lib; then
- libs="$predeps $libs $compiler_lib_search_path $postdeps"
-
- # Compute libraries that are listed more than once in $predeps
- # $postdeps and mark them as special (i.e., whose duplicates are
- # not to be eliminated).
- pre_post_deps=
- if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
- for pre_post_dep in $predeps $postdeps; do
- case "$pre_post_deps " in
- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps"
;;
- esac
- pre_post_deps="$pre_post_deps $pre_post_dep"
- done
- fi
- pre_post_deps=
- fi
-
- deplibs=
- newdependency_libs=
- newlib_search_path=
- need_relink=no # whether we're linking any uninstalled libtool libraries
- notinst_deplibs= # not-installed libtool libraries
- case $linkmode in
- lib)
- passes="conv link"
- for file in $dlfiles $dlprefiles; do
- case $file in
- *.la) ;;
- *)
- $echo "$modename: libraries can \`-dlopen' only libtool libraries:
$file" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- done
- ;;
- prog)
- compile_deplibs=
- finalize_deplibs=
- alldeplibs=no
- newdlfiles=
- newdlprefiles=
- passes="conv scan dlopen dlpreopen link"
- ;;
- *) passes="conv"
- ;;
- esac
- for pass in $passes; do
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan"; then
- libs="$deplibs"
- deplibs=
- fi
- if test "$linkmode" = prog; then
- case $pass in
- dlopen) libs="$dlfiles" ;;
- dlpreopen) libs="$dlprefiles" ;;
- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
- esac
- fi
- if test "$pass" = dlopen; then
- # Collect dlpreopened libraries
- save_deplibs="$deplibs"
- deplibs=
- fi
- for deplib in $libs; do
- lib=
- found=no
- case $deplib in
-
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- compiler_flags="$compiler_flags $deplib"
- fi
- continue
- ;;
- -l*)
- if test "$linkmode" != lib && test "$linkmode" != prog; then
- $echo "$modename: warning: \`-l' is ignored for archives/objects"
1>&2
- continue
- fi
- name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
- for searchdir in $newlib_search_path $lib_search_path
$sys_lib_search_path $shlib_search_path; do
- for search_ext in .la $std_shrext .so .a; do
- # Search the libtool library
- lib="$searchdir/lib${name}${search_ext}"
- if test -f "$lib"; then
- if test "$search_ext" = ".la"; then
- found=yes
- else
- found=no
- fi
- break 2
- fi
- done
- done
- if test "$found" != yes; then
- # deplib doesn't seem to be a libtool library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib
$newdependency_libs"
- fi
- continue
- else # deplib is a libtool library
- # If $allow_libtool_libs_with_static_runtimes && $deplib is a
stdlib,
- # We need to do some special things here, and not later.
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $deplib "*)
- if (${SED} -e '2q' $lib |
- grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- library_names=
- old_library=
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
- for l in $old_library $library_names; do
- ll="$l"
- done
- if test "X$ll" = "X$old_library" ; then # only static version
available
- found=no
- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$ladir" = "X$lib" && ladir="."
- lib=$ladir/$old_library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib
$newdependency_libs"
- fi
- continue
- fi
- fi
- ;;
- *) ;;
- esac
- fi
- fi
- ;; # -l
- -L*)
- case $linkmode in
- lib)
- deplibs="$deplib $deplibs"
- test "$pass" = conv && continue
- newdependency_libs="$deplib $newdependency_libs"
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed
-e 's/^-L//'`
- ;;
- prog)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- if test "$pass" = scan; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed
-e 's/^-L//'`
- ;;
- *)
- $echo "$modename: warning: \`-L' is ignored for archives/objects"
1>&2
- ;;
- esac # linkmode
- continue
- ;; # -L
- -R*)
- if test "$pass" = link; then
- dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
- # Make sure the xrpath contains only unique directories.
- case "$xrpath " in
- *" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
- esac
- fi
- deplibs="$deplib $deplibs"
- continue
- ;;
- *.la) lib="$deplib" ;;
- *.$libext)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- case $linkmode in
- lib)
- valid_a_lib=no
- case $deplibs_check_method in
- match_pattern*)
- set dummy $deplibs_check_method
- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- if eval $echo \"$deplib\" 2>/dev/null \
- | $SED 10q \
- | $EGREP "$match_pattern_regex" > /dev/null; then
- valid_a_lib=yes
- fi
- ;;
- pass_all)
- valid_a_lib=yes
- ;;
- esac
- if test "$valid_a_lib" != yes; then
- $echo
- $echo "*** Warning: Trying to link with static lib archive
$deplib."
- $echo "*** I have the capability to make that library
automatically link in when"
- $echo "*** you link to this library. But I can only do this if
you have a"
- $echo "*** shared version of the library, which you do not appear
to have"
- $echo "*** because the file extensions .$libext of this argument
makes me believe"
- $echo "*** that it is just a static archive that I should not
used here."
- else
- $echo
- $echo "*** Warning: Linking the shared library $output against
the"
- $echo "*** static library $deplib is not portable!"
- deplibs="$deplib $deplibs"
- fi
- continue
- ;;
- prog)
- if test "$pass" != link; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- continue
- ;;
- esac # linkmode
- ;; # *.$libext
- *.lo | *.$objext)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- elif test "$linkmode" = prog; then
- if test "$pass" = dlpreopen || test "$dlopen_support" != yes ||
test "$build_libtool_libs" = no; then
- # If there is no dlopen support or we're linking statically,
- # we need to preload.
- newdlprefiles="$newdlprefiles $deplib"
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- newdlfiles="$newdlfiles $deplib"
- fi
- fi
- continue
- ;;
- %DEPLIBS%)
- alldeplibs=yes
- continue
- ;;
- esac # case $deplib
- if test "$found" = yes || test -f "$lib"; then :
- else
- $echo "$modename: cannot find the library \`$lib' or unhandled
argument \`$deplib'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null
2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
-
- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$ladir" = "X$lib" && ladir="."
-
- dlname=
- dlopen=
- dlpreopen=
- libdir=
- library_names=
- old_library=
- # If the library was installed with an old release of libtool,
- # it will not redefine variables installed, or shouldnotlink
- installed=yes
- shouldnotlink=no
- avoidtemprpath=
-
-
- # Read the .la file
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
-
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan" ||
- { test "$linkmode" != prog && test "$linkmode" != lib; }; then
- test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
- fi
-
- if test "$pass" = conv; then
- # Only check for convenience libraries
- deplibs="$lib $deplibs"
- if test -z "$libdir"; then
- if test -z "$old_library"; then
- $echo "$modename: cannot find name of link library for \`$lib'"
1>&2
- exit $EXIT_FAILURE
- fi
- # It is a libtool convenience library, so add in its objects.
- convenience="$convenience $ladir/$objdir/$old_library"
- old_convenience="$old_convenience $ladir/$objdir/$old_library"
- tmp_libs=
- for deplib in $dependency_libs; do
- deplibs="$deplib $deplibs"
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done
- elif test "$linkmode" != prog && test "$linkmode" != lib; then
- $echo "$modename: \`$lib' is not a convenience library" 1>&2
- exit $EXIT_FAILURE
- fi
- continue
- fi # $pass = conv
-
-
- # Get the name of the library we link against.
- linklib=
- for l in $old_library $library_names; do
- linklib="$l"
- done
- if test -z "$linklib"; then
- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # This library was specified with -dlopen.
- if test "$pass" = dlopen; then
- if test -z "$libdir"; then
- $echo "$modename: cannot -dlopen a convenience library: \`$lib'"
1>&2
- exit $EXIT_FAILURE
- fi
- if test -z "$dlname" ||
- test "$dlopen_support" != yes ||
- test "$build_libtool_libs" = no; then
- # If there is no dlname, no dlopen support or we're linking
- # statically, we need to preload. We also need to preload any
- # dependent libraries so libltdl's deplib preloader doesn't
- # bomb out in the load deplibs phase.
- dlprefiles="$dlprefiles $lib $dependency_libs"
- else
- newdlfiles="$newdlfiles $lib"
- fi
- continue
- fi # $pass = dlopen
-
- # We need an absolute path.
- case $ladir in
- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
- *)
- abs_ladir=`cd "$ladir" && pwd`
- if test -z "$abs_ladir"; then
- $echo "$modename: warning: cannot determine absolute directory name
of \`$ladir'" 1>&2
- $echo "$modename: passing it literally to the linker, although it
might fail" 1>&2
- abs_ladir="$ladir"
- fi
- ;;
- esac
- laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-
- # Find the relevant object directory and library name.
- if test "X$installed" = Xyes; then
- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- $echo "$modename: warning: library \`$lib' was moved." 1>&2
- dir="$ladir"
- absdir="$abs_ladir"
- libdir="$abs_ladir"
- else
- dir="$libdir"
- absdir="$libdir"
- fi
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
- else
- if test ! -f "$ladir/$objdir/$linklib" && test -f
"$abs_ladir/$linklib"; then
- dir="$ladir"
- absdir="$abs_ladir"
- # Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
- else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
- # Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
- fi
- fi # $installed = yes
- name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-
- # This library was specified with -dlpreopen.
- if test "$pass" = dlpreopen; then
- if test -z "$libdir"; then
- $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'"
1>&2
- exit $EXIT_FAILURE
- fi
- # Prefer using a static library (so that no silly _DYNAMIC symbols
- # are required to link).
- if test -n "$old_library"; then
- newdlprefiles="$newdlprefiles $dir/$old_library"
- # Otherwise, use the dlname, so that lt_dlopen finds it.
- elif test -n "$dlname"; then
- newdlprefiles="$newdlprefiles $dir/$dlname"
- else
- newdlprefiles="$newdlprefiles $dir/$linklib"
- fi
- fi # $pass = dlpreopen
-
- if test -z "$libdir"; then
- # Link the convenience library
- if test "$linkmode" = lib; then
- deplibs="$dir/$old_library $deplibs"
- elif test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$dir/$old_library $compile_deplibs"
- finalize_deplibs="$dir/$old_library $finalize_deplibs"
- else
- deplibs="$lib $deplibs" # used for prog,scan pass
- fi
- continue
- fi
-
-
- if test "$linkmode" = prog && test "$pass" != link; then
- newlib_search_path="$newlib_search_path $ladir"
- deplibs="$lib $deplibs"
-
- linkalldeplibs=no
- if test "$link_all_deplibs" != no || test -z "$library_names" ||
- test "$build_libtool_libs" = no; then
- linkalldeplibs=yes
- fi
-
- tmp_libs=
- for deplib in $dependency_libs; do
- case $deplib in
- -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" |
$Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
- esac
- # Need to link against all dependency_libs?
- if test "$linkalldeplibs" = yes; then
- deplibs="$deplib $deplibs"
- else
- # Need to hardcode shared library paths
- # or/and link against static libraries
- newdependency_libs="$deplib $newdependency_libs"
- fi
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done # for deplib
- continue
- fi # $linkmode = prog...
-
- if test "$linkmode,$pass" = "prog,link"; then
- if test -n "$library_names" &&
- { { test "$prefer_static_libs" = no ||
- test "$prefer_static_libs,$installed" = "built,yes"; } ||
- test -z "$old_library"; }; then
- # We need to hardcode the library path
- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
- # Make sure the rpath contains only unique directories.
- case "$temp_rpath " in
- *" $dir "*) ;;
- *" $absdir "*) ;;
- *) temp_rpath="$temp_rpath $absdir" ;;
- esac
- fi
-
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
- esac
- ;;
- esac
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
- esac
- ;;
- esac
- fi # $linkmode,$pass = prog,link...
-
- if test "$alldeplibs" = yes &&
- { test "$deplibs_check_method" = pass_all ||
- { test "$build_libtool_libs" = yes &&
- test -n "$library_names"; }; }; then
- # We only need to search for static libraries
- continue
- fi
- fi
-
- link_static=no # Whether the deplib will be linked statically
- use_static_libs=$prefer_static_libs
- if test "$use_static_libs" = built && test "$installed" = yes ; then
- use_static_libs=no
- fi
- if test -n "$library_names" &&
- { test "$use_static_libs" = no || test -z "$old_library"; }; then
- if test "$installed" = no; then
- notinst_deplibs="$notinst_deplibs $lib"
- need_relink=yes
- fi
- # This is a shared library
-
- # Warn about portability, can't link against -module's on
- # some systems (darwin)
- if test "$shouldnotlink" = yes && test "$pass" = link ; then
- $echo
- if test "$linkmode" = prog; then
- $echo "*** Warning: Linking the executable $output against the
loadable module"
- else
- $echo "*** Warning: Linking the shared library $output against
the loadable module"
- fi
- $echo "*** $linklib is not portable!"
- fi
- if test "$linkmode" = lib &&
- test "$hardcode_into_libs" = yes; then
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
- esac
- ;;
- esac
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
- esac
- ;;
- esac
- fi
-
- if test -n "$old_archive_from_expsyms_cmds"; then
- # figure out the soname
- set dummy $library_names
- realname="$2"
- shift; shift
- libname=`eval \\$echo \"$libname_spec\"`
- # use dlname if we got it. it's perfectly good, no?
- if test -n "$dlname"; then
- soname="$dlname"
- elif test -n "$soname_spec"; then
- # bleh windows
- case $host in
- *cygwin* | mingw*)
- major=`expr $current - $age`
- versuffix="-$major"
- ;;
- esac
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
-
- # Make a new name for the extract_expsyms_cmds to use
- soroot="$soname"
- soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
- newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
-
- # If the library has no export list, then create one now
- if test -f "$output_objdir/$soname-def"; then :
- else
- $show "extracting exported symbol list from \`$soname'"
- save_ifs="$IFS"; IFS='~'
- cmds=$extract_expsyms_cmds
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
-
- # Create $newlib
- if test -f "$output_objdir/$newlib"; then :; else
- $show "generating import library for \`$soname'"
- save_ifs="$IFS"; IFS='~'
- cmds=$old_archive_from_expsyms_cmds
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
- # make sure the library variables are pointing to the new library
- dir=$output_objdir
- linklib=$newlib
- fi # test -n "$old_archive_from_expsyms_cmds"
-
- if test "$linkmode" = prog || test "$mode" != relink; then
- add_shlibpath=
- add_dir=
- add=
- lib_linked=yes
- case $hardcode_action in
- immediate | unsupported)
- if test "$hardcode_direct" = no; then
- add="$dir/$linklib"
- case $host in
- *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
- *-*-sysv4*uw2*) add_dir="-L$dir" ;;
- *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
- *-*-unixware7*) add_dir="-L$dir" ;;
- *-*-darwin* )
- # if the lib is a module then we can not link against
- # it, someone is ignoring the new warnings I added
- if /usr/bin/file -L $add 2> /dev/null |
- $EGREP ": [^:]* bundle" >/dev/null ; then
- $echo "** Warning, lib $linklib is a module, not a shared
library"
- if test -z "$old_library" ; then
- $echo
- $echo "** And there doesn't seem to be a static archive
available"
- $echo "** The link will probably fail, sorry"
- else
- add="$dir/$old_library"
- fi
- fi
- esac
- elif test "$hardcode_minus_L" = no; then
- case $host in
- *-*-sunos*) add_shlibpath="$dir" ;;
- esac
- add_dir="-L$dir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- add_shlibpath="$dir"
- add="-l$name"
- else
- lib_linked=no
- fi
- ;;
- relink)
- if test "$hardcode_direct" = yes; then
- add="$dir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$dir"
- # Try looking first in the location we're being installed to.
- if test -n "$inst_prefix_dir"; then
- case $libdir in
- [\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- add_shlibpath="$dir"
- add="-l$name"
- else
- lib_linked=no
- fi
- ;;
- *) lib_linked=no ;;
- esac
-
- if test "$lib_linked" != yes; then
- $echo "$modename: configuration error: unsupported hardcode
properties"
- exit $EXIT_FAILURE
- fi
-
- if test -n "$add_shlibpath"; then
- case :$compile_shlibpath: in
- *":$add_shlibpath:"*) ;;
- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
- esac
- fi
- if test "$linkmode" = prog; then
- test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
- test -n "$add" && compile_deplibs="$add $compile_deplibs"
- else
- test -n "$add_dir" && deplibs="$add_dir $deplibs"
- test -n "$add" && deplibs="$add $deplibs"
- if test "$hardcode_direct" != yes && \
- test "$hardcode_minus_L" != yes && \
- test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
- esac
- fi
- fi
- fi
-
- if test "$linkmode" = prog || test "$mode" = relink; then
- add_shlibpath=
- add_dir=
- add=
- # Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes; then
- add="$libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$libdir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
- esac
- add="-l$name"
- elif test "$hardcode_automatic" = yes; then
- if test -n "$inst_prefix_dir" &&
- test -f "$inst_prefix_dir$libdir/$linklib" ; then
- add="$inst_prefix_dir$libdir/$linklib"
- else
- add="$libdir/$linklib"
- fi
- else
- # We cannot seem to hardcode it, guess we'll fake it.
- add_dir="-L$libdir"
- # Try looking first in the location we're being installed to.
- if test -n "$inst_prefix_dir"; then
- case $libdir in
- [\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
- add="-l$name"
- fi
-
- if test "$linkmode" = prog; then
- test -n "$add_dir" && finalize_deplibs="$add_dir
$finalize_deplibs"
- test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
- else
- test -n "$add_dir" && deplibs="$add_dir $deplibs"
- test -n "$add" && deplibs="$add $deplibs"
- fi
- fi
- elif test "$linkmode" = prog; then
- # Here we assume that one of hardcode_direct or hardcode_minus_L
- # is not unsupported. This is valid on all known static and
- # shared platforms.
- if test "$hardcode_direct" != unsupported; then
- test -n "$old_library" && linklib="$old_library"
- compile_deplibs="$dir/$linklib $compile_deplibs"
- finalize_deplibs="$dir/$linklib $finalize_deplibs"
- else
- compile_deplibs="-l$name -L$dir $compile_deplibs"
- finalize_deplibs="-l$name -L$dir $finalize_deplibs"
- fi
- elif test "$build_libtool_libs" = yes; then
- # Not a shared library
- if test "$deplibs_check_method" != pass_all; then
- # We're trying link a shared library against a static one
- # but the system doesn't support it.
-
- # Just print a warning and add the library to dependency_libs so
- # that the program can be linked against the static library.
- $echo
- $echo "*** Warning: This system can not link to static lib archive
$lib."
- $echo "*** I have the capability to make that library automatically
link in when"
- $echo "*** you link to this library. But I can only do this if you
have a"
- $echo "*** shared version of the library, which you do not appear
to have."
- if test "$module" = yes; then
- $echo "*** But as you try to build a module library, libtool will
still create "
- $echo "*** a static module, that should work as long as the
dlopening application"
- $echo "*** is linked with the -dlopen flag to resolve symbols at
runtime."
- if test -z "$global_symbol_pipe"; then
- $echo
- $echo "*** However, this would only work if libtool was able to
extract symbol"
- $echo "*** lists from a program, using \`nm' or equivalent, but
libtool could"
- $echo "*** not find such a program. So, this module is
probably useless."
- $echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- fi
- else
- deplibs="$dir/$old_library $deplibs"
- link_static=yes
- fi
- fi # link shared/static library?
-
- if test "$linkmode" = lib; then
- if test -n "$dependency_libs" &&
- { test "$hardcode_into_libs" != yes ||
- test "$build_old_libs" = yes ||
- test "$link_static" = yes; }; then
- # Extract -R from dependency_libs
- temp_deplibs=
- for libdir in $dependency_libs; do
- case $libdir in
- -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
- case " $xrpath " in
- *" $temp_xrpath "*) ;;
- *) xrpath="$xrpath $temp_xrpath";;
- esac;;
- *) temp_deplibs="$temp_deplibs $libdir";;
- esac
- done
- dependency_libs="$temp_deplibs"
- fi
-
- newlib_search_path="$newlib_search_path $absdir"
- # Link against this library
- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname
$newdependency_libs"
- # ... and its dependency_libs
- tmp_libs=
- for deplib in $dependency_libs; do
- newdependency_libs="$deplib $newdependency_libs"
- if test "X$duplicate_deps" = "Xyes" ; then
- case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
- esac
- fi
- tmp_libs="$tmp_libs $deplib"
- done
-
- if test "$link_all_deplibs" != no; then
- # Add the search paths of all dependency libraries
- for deplib in $dependency_libs; do
- case $deplib in
- -L*) path="$deplib" ;;
- *.la)
- dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$deplib" && dir="."
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: warning: cannot determine absolute
directory name of \`$dir'" 1>&2
- absdir="$dir"
- fi
- ;;
- esac
- if grep "^installed=no" $deplib > /dev/null; then
- path="$absdir/$objdir"
- else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
- $echo "$modename: \`$deplib' is not a valid libtool
archive" 1>&2
- exit $EXIT_FAILURE
- fi
- if test "$absdir" != "$libdir"; then
- $echo "$modename: warning: \`$deplib' seems to be moved"
1>&2
- fi
- path="$absdir"
- fi
- depdepl=
- case $host in
- *-*-darwin*)
- # we do not want to link against static libs,
- # but need to link against shared
- eval deplibrary_names=`${SED} -n -e
's/^library_names=\(.*\)$/\1/p' $deplib`
- if test -n "$deplibrary_names" ; then
- for tmp in $deplibrary_names ; do
- depdepl=$tmp
- done
- if test -f "$path/$depdepl" ; then
- depdepl="$path/$depdepl"
- fi
- # do not add paths which are already there
- case " $newlib_search_path " in
- *" $path "*) ;;
- *) newlib_search_path="$newlib_search_path $path";;
- esac
- fi
- path=""
- ;;
- *)
- path="-L$path"
- ;;
- esac
- ;;
- -l*)
- case $host in
- *-*-darwin*)
- # Again, we only want to link against shared libraries
- eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
- for tmp in $newlib_search_path ; do
- if test -f "$tmp/lib$tmp_libs.dylib" ; then
- eval depdepl="$tmp/lib$tmp_libs.dylib"
- break
- fi
- done
- path=""
- ;;
- *) continue ;;
- esac
- ;;
- *) continue ;;
- esac
- case " $deplibs " in
- *" $path "*) ;;
- *) deplibs="$path $deplibs" ;;
- esac
- case " $deplibs " in
- *" $depdepl "*) ;;
- *) deplibs="$depdepl $deplibs" ;;
- esac
- done
- fi # link_all_deplibs != no
- fi # linkmode = lib
- done # for deplib in $libs
- dependency_libs="$newdependency_libs"
- if test "$pass" = dlpreopen; then
- # Link the dlpreopened libraries before other libraries
- for deplib in $save_deplibs; do
- deplibs="$deplib $deplibs"
- done
- fi
- if test "$pass" != dlopen; then
- if test "$pass" != conv; then
- # Make sure lib_search_path contains only unique directories.
- lib_search_path=
- for dir in $newlib_search_path; do
- case "$lib_search_path " in
- *" $dir "*) ;;
- *) lib_search_path="$lib_search_path $dir" ;;
- esac
- done
- newlib_search_path=
- fi
-
- if test "$linkmode,$pass" != "prog,link"; then
- vars="deplibs"
- else
- vars="compile_deplibs finalize_deplibs"
- fi
- for var in $vars dependency_libs; do
- # Add libraries to $var in reverse order
- eval tmp_libs=\"\$$var\"
- new_libs=
- for deplib in $tmp_libs; do
- # FIXME: Pedantically, this is the right thing to do, so
- # that some nasty dependency loop isn't accidentally
- # broken:
- #new_libs="$deplib $new_libs"
- # Pragmatically, this seems to cause very few problems in
- # practice:
- case $deplib in
- -L*) new_libs="$deplib $new_libs" ;;
- -R*) ;;
- *)
- # And here is the reason: when a library appears more
- # than once as an explicit dependence of a library, or
- # is implicitly linked in more than once by the
- # compiler, it is considered special, and multiple
- # occurrences thereof are not removed. Compare this
- # with having the same library being listed as a
- # dependency of multiple other libraries: in this case,
- # we know (pedantically, we assume) the library does not
- # need to be listed more than once, so we keep only the
- # last copy. This is not always right, but it is rare
- # enough that we require users that really mean to play
- # such unportable linking tricks to link the library
- # using -Wl,-lname, so that libtool does not consider it
- # for duplicate removal.
- case " $specialdeplibs " in
- *" $deplib "*) new_libs="$deplib $new_libs" ;;
- *)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$deplib $new_libs" ;;
- esac
- ;;
- esac
- ;;
- esac
- done
- tmp_libs=
- for deplib in $new_libs; do
- case $deplib in
- -L*)
- case " $tmp_libs " in
- *" $deplib "*) ;;
- *) tmp_libs="$tmp_libs $deplib" ;;
- esac
- ;;
- *) tmp_libs="$tmp_libs $deplib" ;;
- esac
- done
- eval $var=\"$tmp_libs\"
- done # for var
- fi
- # Last step: remove runtime libs from dependency_libs
- # (they stay in deplibs)
- tmp_libs=
- for i in $dependency_libs ; do
- case " $predeps $postdeps $compiler_lib_search_path " in
- *" $i "*)
- i=""
- ;;
- esac
- if test -n "$i" ; then
- tmp_libs="$tmp_libs $i"
- fi
- done
- dependency_libs=$tmp_libs
- done # for pass
- if test "$linkmode" = prog; then
- dlfiles="$newdlfiles"
- dlprefiles="$newdlprefiles"
- fi
-
- case $linkmode in
- oldlib)
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for archives"
1>&2
- fi
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
- fi
-
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
- fi
-
- if test -n "$xrpath"; then
- $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info/-version-number' is ignored
for archives" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
- fi
-
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: warning: \`-export-symbols' is ignored for archives"
1>&2
- fi
-
- # Now set the variables for building old libraries.
- build_libtool_libs=no
- oldlibs="$output"
- objs="$objs$old_deplibs"
- ;;
-
- lib)
- # Make sure we only generate libraries of the form `libNAME.la'.
- case $outputname in
- lib*)
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
- eval shared_ext=\"$shrext_cmds\"
- eval libname=\"$libname_spec\"
- ;;
- *)
- if test "$module" = no; then
- $echo "$modename: libtool library \`$output' must begin with \`lib'"
1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
- if test "$need_lib_prefix" != no; then
- # Add the "lib" prefix for modules if required
- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
- eval shared_ext=\"$shrext_cmds\"
- eval libname=\"$libname_spec\"
- else
- libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
- fi
- ;;
- esac
-
- if test -n "$objs"; then
- if test "$deplibs_check_method" != pass_all; then
- $echo "$modename: cannot build libtool library \`$output' from
non-libtool objects on this host:$objs" 2>&1
- exit $EXIT_FAILURE
- else
- $echo
- $echo "*** Warning: Linking the shared library $output against the
non-libtool"
- $echo "*** objects $objs is not portable!"
- libobjs="$libobjs $objs"
- fi
- fi
-
- if test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen self' is ignored for libtool
libraries" 1>&2
- fi
-
- set dummy $rpath
- if test "$#" -gt 2; then
- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool
library" 1>&2
- fi
- install_libdir="$2"
-
- oldlibs=
- if test -z "$rpath"; then
- if test "$build_libtool_libs" = yes; then
- # Building a libtool convenience library.
- # Some compilers have problems with a `.al' extension so
- # convenience libraries should have the same extension an
- # archive normally would.
- oldlibs="$output_objdir/$libname.$libext $oldlibs"
- build_libtool_libs=convenience
- build_old_libs=yes
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info/-version-number' is
ignored for convenience libraries" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for convenience
libraries" 1>&2
- fi
- else
-
- # Parse the version information argument.
- save_ifs="$IFS"; IFS=':'
- set dummy $vinfo 0 0 0
- IFS="$save_ifs"
-
- if test -n "$8"; then
- $echo "$modename: too many parameters to \`-version-info'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # convert absolute version numbers to libtool ages
- # this retains compatibility with .la files and attempts
- # to make the code below a bit more comprehensible
-
- case $vinfo_number in
- yes)
- number_major="$2"
- number_minor="$3"
- number_revision="$4"
- #
- # There are really only two kinds -- those that
- # use the current revision as the major version
- # and those that subtract age and use age as
- # a minor version. But, then there is irix
- # which has an extra 1 added just for fun
- #
- case $version_type in
- darwin|linux|osf|windows|none)
- current=`expr $number_major + $number_minor`
- age="$number_minor"
- revision="$number_revision"
- ;;
- freebsd-aout|freebsd-elf|sunos)
- current="$number_major"
- revision="$number_minor"
- age="0"
- ;;
- irix|nonstopux)
- current=`expr $number_major + $number_minor - 1`
- age="$number_minor"
- revision="$number_minor"
- ;;
- esac
- ;;
- no)
- current="$2"
- revision="$3"
- age="$4"
- ;;
- esac
-
- # Check that each of the things are valid numbers.
- case $current in
-
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9])
;;
- *)
- $echo "$modename: CURRENT \`$current' must be a nonnegative integer"
1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- case $revision in
-
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9])
;;
- *)
- $echo "$modename: REVISION \`$revision' must be a nonnegative
integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- case $age in
-
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9])
;;
- *)
- $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- if test "$age" -gt "$current"; then
- $echo "$modename: AGE \`$age' is greater than the current interface
number \`$current'" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Calculate the version variables.
- major=
- versuffix=
- verstring=
- case $version_type in
- none) ;;
-
- darwin)
- # Like Linux, but with the current version available in
- # verstring for coding it into the library header
- major=.`expr $current - $age`
- versuffix="$major.$age.$revision"
- # Darwin ld doesn't like 0 for these options...
- minor_current=`expr $current + 1`
- verstring="${wl}-compatibility_version ${wl}$minor_current
${wl}-current_version ${wl}$minor_current.$revision"
- ;;
-
- freebsd-aout)
- major=".$current"
- versuffix=".$current.$revision";
- ;;
-
- freebsd-elf)
- major=".$current"
- versuffix=".$current";
- ;;
-
- irix | nonstopux)
- major=`expr $current - $age + 1`
-
- case $version_type in
- nonstopux) verstring_prefix=nonstopux ;;
- *) verstring_prefix=sgi ;;
- esac
- verstring="$verstring_prefix$major.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$revision
- while test "$loop" -ne 0; do
- iface=`expr $revision - $loop`
- loop=`expr $loop - 1`
- verstring="$verstring_prefix$major.$iface:$verstring"
- done
-
- # Before this point, $major must not contain `.'.
- major=.$major
- versuffix="$major.$revision"
- ;;
-
- linux)
- major=.`expr $current - $age`
- versuffix="$major.$age.$revision"
- ;;
-
- osf)
- major=.`expr $current - $age`
- versuffix=".$current.$age.$revision"
- verstring="$current.$age.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$age
- while test "$loop" -ne 0; do
- iface=`expr $current - $loop`
- loop=`expr $loop - 1`
- verstring="$verstring:${iface}.0"
- done
-
- # Make executables depend on our current version.
- verstring="$verstring:${current}.0"
- ;;
-
- sunos)
- major=".$current"
- versuffix=".$current.$revision"
- ;;
-
- windows)
- # Use '-' rather than '.', since we only want one
- # extension on DOS 8.3 filesystems.
- major=`expr $current - $age`
- versuffix="-$major"
- ;;
-
- *)
- $echo "$modename: unknown library version type \`$version_type'" 1>&2
- $echo "Fatal configuration error. See the $PACKAGE docs for more
information." 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- # Clear the version info if we defaulted, and they specified a release.
- if test -z "$vinfo" && test -n "$release"; then
- major=
- case $version_type in
- darwin)
- # we can't check for "0.0" in archive_cmds due to quoting
- # problems, so we reset it completely
- verstring=
- ;;
- *)
- verstring="0.0"
- ;;
- esac
- if test "$need_version" = no; then
- versuffix=
- else
- versuffix=".0.0"
- fi
- fi
-
- # Remove version info from name if versioning should be avoided
- if test "$avoid_version" = yes && test "$need_version" = no; then
- major=
- versuffix=
- verstring=""
- fi
-
- # Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- $echo "$modename: warning: undefined symbols not allowed in $host
shared libraries" 1>&2
- build_libtool_libs=no
- build_old_libs=yes
- fi
- else
- # Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
- fi
- fi
-
- if test "$mode" != relink; then
- # Remove our outputs, but don't remove object files since they
- # may have been created when compiling PIC objects.
- removelist=
- tempremovelist=`$echo "$output_objdir/*"`
- for p in $tempremovelist; do
- case $p in
- *.$objext)
- ;;
- $output_objdir/$outputname | $output_objdir/$libname.* |
$output_objdir/${libname}${release}.*)
- if test "X$precious_files_regex" != "X"; then
- if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
- then
- continue
- fi
- fi
- removelist="$removelist $p"
- ;;
- *) ;;
- esac
- done
- if test -n "$removelist"; then
- $show "${rm}r $removelist"
- $run ${rm}r $removelist
- fi
- fi
-
- # Now set the variables for building old libraries.
- if test "$build_old_libs" = yes && test "$build_libtool_libs" !=
convenience ; then
- oldlibs="$oldlibs $output_objdir/$libname.$libext"
-
- # Transform .lo files to .o files.
- oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e
'/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
- fi
-
- # Eliminate all temporary directories.
- #for path in $notinst_path; do
- # lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s%
$path % %g"`
- # deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
- # dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s%
-L$path % %g"`
- #done
-
- if test -n "$xrpath"; then
- # If the user specified any rpath flags, then add them.
- temp_xrpath=
- for libdir in $xrpath; do
- temp_xrpath="$temp_xrpath -R$libdir"
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
- esac
- done
- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes;
then
- dependency_libs="$temp_xrpath $dependency_libs"
- fi
- fi
-
- # Make sure dlfiles contains only unique files that won't be dlpreopened
- old_dlfiles="$dlfiles"
- dlfiles=
- for lib in $old_dlfiles; do
- case " $dlprefiles $dlfiles " in
- *" $lib "*) ;;
- *) dlfiles="$dlfiles $lib" ;;
- esac
- done
-
- # Make sure dlprefiles contains only unique files
- old_dlprefiles="$dlprefiles"
- dlprefiles=
- for lib in $old_dlprefiles; do
- case "$dlprefiles " in
- *" $lib "*) ;;
- *) dlprefiles="$dlprefiles $lib" ;;
- esac
- done
-
- if test "$build_libtool_libs" = yes; then
- if test -n "$rpath"; then
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
- # these systems don't actually have a c library (as such)!
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C library is in the System framework
- deplibs="$deplibs -framework System"
- ;;
- *-*-netbsd*)
- # Don't link with libc until the a.out ld.so is fixed.
- ;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc due to us having libc/libc_r.
- ;;
- *-*-sco3.2v5* | *-*-sco5v6*)
- # Causes problems with __ctype
- ;;
- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
- # Compiler inserts libc in the correct place for threads to work
- ;;
- *)
- # Add libc to deplibs on all other systems if necessary.
- if test "$build_libtool_need_lc" = "yes"; then
- deplibs="$deplibs -lc"
- fi
- ;;
- esac
- fi
-
- # Transform deplibs into only deplibs that can be linked in shared.
- name_save=$name
- libname_save=$libname
- release_save=$release
- versuffix_save=$versuffix
- major_save=$major
- # I'm not sure if I'm treating the release correctly. I think
- # release should show up in the -l (ie -lgmp5) so we don't want to
- # add it in twice. Is that correct?
- release=""
- versuffix=""
- major=""
- newdeplibs=
- droppeddeps=no
- case $deplibs_check_method in
- pass_all)
- # Don't check for shared/static. Everything works.
- # This might be a little naive. We might want to check
- # whether the library exists or not. But this is on
- # osf3 & osf4 and I'm not really sure... Just
- # implementing what was already the behavior.
- newdeplibs=$deplibs
- ;;
- test_compile)
- # This code stresses the "libraries are programs" paradigm to its
- # limits. Maybe even breaks it. We compile a program, linking it
- # against the deplibs as a proxy for the library. Then we can check
- # whether they linked in statically or dynamically with ldd.
- $rm conftest.c
- cat > conftest.c <<EOF
- int main() { return 0; }
-EOF
- $rm conftest
- if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
- ldd_output=`ldd conftest`
- for i in $deplibs; do
- name=`expr $i : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ;
then
- case " $predeps $postdeps " in
- *" $i "*)
- newdeplibs="$newdeplibs $i"
- i=""
- ;;
- esac
- fi
- if test -n "$i" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- $echo
- $echo "*** Warning: dynamic linker does not accept needed
library $i."
- $echo "*** I have the capability to make that library
automatically link in when"
- $echo "*** you link to this library. But I can only do
this if you have a"
- $echo "*** shared version of the library, which I believe
you do not have"
- $echo "*** because a test_compile did reveal that the
linker did not use it for"
- $echo "*** its dynamic dependency list that programs get
resolved with at runtime."
- fi
- fi
- else
- newdeplibs="$newdeplibs $i"
- fi
- done
- else
- # Error occurred in the first compile. Let's try to salvage
- # the situation: Compile a separate program for each library.
- for i in $deplibs; do
- name=`expr $i : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
- $rm conftest
- if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
- ldd_output=`ldd conftest`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes"
; then
- case " $predeps $postdeps " in
- *" $i "*)
- newdeplibs="$newdeplibs $i"
- i=""
- ;;
- esac
- fi
- if test -n "$i" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ;
then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- $echo
- $echo "*** Warning: dynamic linker does not accept needed
library $i."
- $echo "*** I have the capability to make that library
automatically link in when"
- $echo "*** you link to this library. But I can only do
this if you have a"
- $echo "*** shared version of the library, which you do
not appear to have"
- $echo "*** because a test_compile did reveal that the
linker did not use this one"
- $echo "*** as a dynamic dependency that programs can get
resolved with at runtime."
- fi
- fi
- else
- droppeddeps=yes
- $echo
- $echo "*** Warning! Library $i is needed by this library but
I was not able to"
- $echo "*** make it link in! You will probably need to
install it or some"
- $echo "*** library that it depends on before this library
will be fully"
- $echo "*** functional. Installing it before continuing would
be even better."
- fi
- else
- newdeplibs="$newdeplibs $i"
- fi
- done
- fi
- ;;
- file_magic*)
- set dummy $deplibs_check_method
- file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- for a_deplib in $deplibs; do
- name=`expr $a_deplib : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" != "0"; then
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ;
then
- case " $predeps $postdeps " in
- *" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- ;;
- esac
- fi
- if test -n "$a_deplib" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- for i in $lib_search_path $sys_lib_search_path
$shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
- # Follow soft links.
- if ls -lLd "$potent_lib" 2>/dev/null \
- | grep " -> " >/dev/null; then
- continue
- fi
- # The statement above tries to avoid entering an
- # endless loop below, in case of cyclic links.
- # We might still enter an endless loop, since a link
- # loop can be closed while we follow links,
- # but so what?
- potlib="$potent_lib"
- while test -h "$potlib" 2>/dev/null; do
- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
- case $potliblink in
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$echo "X$potlib" | $Xsed -e
's,[^/]*$,,'`"$potliblink";;
- esac
- done
- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
- | ${SED} 10q \
- | $EGREP "$file_magic_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- break 2
- fi
- done
- done
- fi
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- $echo
- $echo "*** Warning: linker path does not have real file for
library $a_deplib."
- $echo "*** I have the capability to make that library
automatically link in when"
- $echo "*** you link to this library. But I can only do this if
you have a"
- $echo "*** shared version of the library, which you do not
appear to have"
- $echo "*** because I did check the linker path looking for a
file starting"
- if test -z "$potlib" ; then
- $echo "*** with $libname but no candidates were found.
(...for file magic test)"
- else
- $echo "*** with $libname and none of the candidates passed a
file format test"
- $echo "*** using a file magic. Last file checked: $potlib"
- fi
- fi
- else
- # Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
- fi
- done # Gone through all deplibs.
- ;;
- match_pattern*)
- set dummy $deplibs_check_method
- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
- for a_deplib in $deplibs; do
- name=`expr $a_deplib : '-l\(.*\)'`
- # If $name is empty we are operating on a -L argument.
- if test -n "$name" && test "$name" != "0"; then
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ;
then
- case " $predeps $postdeps " in
- *" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- ;;
- esac
- fi
- if test -n "$a_deplib" ; then
- libname=`eval \\$echo \"$libname_spec\"`
- for i in $lib_search_path $sys_lib_search_path
$shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
- potlib="$potent_lib" # see symlink-check above in
file_magic test
- if eval $echo \"$potent_lib\" 2>/dev/null \
- | ${SED} 10q \
- | $EGREP "$match_pattern_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
- a_deplib=""
- break 2
- fi
- done
- done
- fi
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- $echo
- $echo "*** Warning: linker path does not have real file for
library $a_deplib."
- $echo "*** I have the capability to make that library
automatically link in when"
- $echo "*** you link to this library. But I can only do this if
you have a"
- $echo "*** shared version of the library, which you do not
appear to have"
- $echo "*** because I did check the linker path looking for a
file starting"
- if test -z "$potlib" ; then
- $echo "*** with $libname but no candidates were found.
(...for regex pattern test)"
- else
- $echo "*** with $libname and none of the candidates passed a
file format test"
- $echo "*** using a regex pattern. Last file checked: $potlib"
- fi
- fi
- else
- # Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
- fi
- done # Gone through all deplibs.
- ;;
- none | unknown | *)
- newdeplibs=""
- tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
- -e 's/ -[LR][^ ]*//g'`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- for i in $predeps $postdeps ; do
- # can't use Xsed below, because $i might contain '/'
- tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e
"s,$i,,"`
- done
- fi
- if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \
- | grep . >/dev/null; then
- $echo
- if test "X$deplibs_check_method" = "Xnone"; then
- $echo "*** Warning: inter-library dependencies are not supported
in this platform."
- else
- $echo "*** Warning: inter-library dependencies are not known to
be supported."
- fi
- $echo "*** All declared inter-library dependencies are being
dropped."
- droppeddeps=yes
- fi
- ;;
- esac
- versuffix=$versuffix_save
- major=$major_save
- release=$release_save
- libname=$libname_save
- name=$name_save
-
- case $host in
- *-*-rhapsody* | *-*-darwin1.[012])
- # On Rhapsody replace the C library is the System framework
- newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework
System /'`
- ;;
- esac
-
- if test "$droppeddeps" = yes; then
- if test "$module" = yes; then
- $echo
- $echo "*** Warning: libtool could not satisfy all declared
inter-library"
- $echo "*** dependencies of module $libname. Therefore, libtool
will create"
- $echo "*** a static module, that should work as long as the
dlopening"
- $echo "*** application is linked with the -dlopen flag."
- if test -z "$global_symbol_pipe"; then
- $echo
- $echo "*** However, this would only work if libtool was able to
extract symbol"
- $echo "*** lists from a program, using \`nm' or equivalent, but
libtool could"
- $echo "*** not find such a program. So, this module is probably
useless."
- $echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- else
- $echo "*** The inter-library dependencies that have been dropped
here will be"
- $echo "*** automatically added whenever a program is linked with
this library"
- $echo "*** or is declared to -dlopen it."
-
- if test "$allow_undefined" = no; then
- $echo
- $echo "*** Since this library must not contain undefined symbols,"
- $echo "*** because either the platform does not support them or"
- $echo "*** it was explicitly requested with -no-undefined,"
- $echo "*** libtool will only create a static version of it."
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- fi
- fi
- fi
- # Done checking deplibs!
- deplibs=$newdeplibs
- fi
-
-
- # move library search paths that coincide with paths to not yet
- # installed libraries to the beginning of the library search list
- new_libs=
- for path in $notinst_path; do
- case " $new_libs " in
- *" -L$path/$objdir "*) ;;
- *)
- case " $deplibs " in
- *" -L$path/$objdir "*)
- new_libs="$new_libs -L$path/$objdir" ;;
- esac
- ;;
- esac
- done
- for deplib in $deplibs; do
- case $deplib in
- -L*)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- done
- deplibs="$new_libs"
-
-
- # All the library-specific variables (install_libdir is set above).
- library_names=
- old_library=
- dlname=
-
- # Test again, we may have decided not to build it any more
- if test "$build_libtool_libs" = yes; then
- if test "$hardcode_into_libs" = yes; then
- # Hardcode the library paths
- hardcode_libdirs=
- dep_rpath=
- rpath="$finalize_rpath"
- test "$mode" != relink && rpath="$compile_rpath$rpath"
- for libdir in $rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case
$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
-
hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- dep_rpath="$dep_rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- if test -n "$hardcode_libdir_flag_spec_ld"; then
- case $archive_cmds in
- *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;;
- *) eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;;
- esac
- else
- eval dep_rpath=\"$hardcode_libdir_flag_spec\"
- fi
- fi
- if test -n "$runpath_var" && test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- rpath="$rpath$dir:"
- done
- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
- fi
- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
- fi
-
- shlibpath="$finalize_shlibpath"
- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
- if test -n "$shlibpath"; then
- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export
$shlibpath_var"
- fi
-
- # Get the real and link names of the library.
- eval shared_ext=\"$shrext_cmds\"
- eval library_names=\"$library_names_spec\"
- set dummy $library_names
- realname="$2"
- shift; shift
-
- if test -n "$soname_spec"; then
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
- if test -z "$dlname"; then
- dlname=$soname
- fi
-
- lib="$output_objdir/$realname"
- linknames=
- for link
- do
- linknames="$linknames $link"
- done
-
- # Use standard objects if they are pic
- test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e
"$lo2o" | $NL2SP`
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- if test "$always_export_symbols" = yes || test -n
"$export_symbols_regex"; then
- $show "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $run $rm $export_symbols
- cmds=$export_symbols_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- if len=`expr "X$cmd" : ".*"` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1;
then
- $show "$cmd"
- $run eval "$cmd" || exit $?
- skipped_export=false
- else
- # The command line is too long to execute in one step.
- $show "using reloadable object file for export list..."
- skipped_export=:
- # Break out early, otherwise skipped_export may be
- # set to false by a later but shorter cmd.
- break
- fi
- done
- IFS="$save_ifs"
- if test -n "$export_symbols_regex"; then
- $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" >
\"${export_symbols}T\""
- $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" >
"${export_symbols}T"'
- $show "$mv \"${export_symbols}T\" \"$export_symbols\""
- $run eval '$mv "${export_symbols}T" "$export_symbols"'
- fi
- fi
- fi
-
- if test -n "$export_symbols" && test -n "$include_expsyms"; then
- $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
- fi
-
- tmp_deplibs=
- for test_deplib in $deplibs; do
- case " $convenience " in
- *" $test_deplib "*) ;;
- *)
- tmp_deplibs="$tmp_deplibs $test_deplib"
- ;;
- esac
- done
- deplibs="$tmp_deplibs"
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- else
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- func_extract_archives $gentop $convenience
- libobjs="$libobjs $func_extract_archives_result"
- fi
- fi
-
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
- eval flag=\"$thread_safe_flag_spec\"
- linker_flags="$linker_flags $flag"
- fi
-
- # Make a backup of the uninstalled library when relinking
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname
${realname}U)' || exit $?
- fi
-
- # Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
- eval test_cmds=\"$module_expsym_cmds\"
- cmds=$module_expsym_cmds
- else
- eval test_cmds=\"$module_cmds\"
- cmds=$module_cmds
- fi
- else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- eval test_cmds=\"$archive_expsym_cmds\"
- cmds=$archive_expsym_cmds
- else
- eval test_cmds=\"$archive_cmds\"
- cmds=$archive_cmds
- fi
- fi
-
- if test "X$skipped_export" != "X:" &&
- len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- :
- else
- # The command line is too long to link in one step, link piecewise.
- $echo "creating reloadable object files..."
-
- # Save the value of $output and $libobjs because we want to
- # use them later. If we have whole_archive_flag_spec, we
- # want to use save_libobjs as it was before
- # whole_archive_flag_spec was expanded, because we can't
- # assume the linker understands whole_archive_flag_spec.
- # This may have to be revisited, in case too many
- # convenience libraries get linked in and end up exceeding
- # the spec.
- if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
- fi
- save_output=$output
- output_la=`$echo "X$output" | $Xsed -e "$basename"`
-
- # Clear the reloadable object creation command queue and
- # initialize k to one.
- test_cmds=
- concat_cmds=
- objlist=
- delfiles=
- last_robj=
- k=1
- output=$output_objdir/$output_la-${k}.$objext
- # Loop over the list of objects to be linked.
- for obj in $save_libobjs
- do
- eval test_cmds=\"$reload_cmds $objlist $last_robj\"
- if test "X$objlist" = X ||
- { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len"; }; then
- objlist="$objlist $obj"
- else
- # The command $test_cmds is almost too long, add a
- # command to the queue.
- if test "$k" -eq 1 ; then
- # The first file doesn't have a previous command to add.
- eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
- else
- # All subsequent reloadable object files will link in
- # the last one created.
- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist
$last_robj\"
- fi
- last_robj=$output_objdir/$output_la-${k}.$objext
- k=`expr $k + 1`
- output=$output_objdir/$output_la-${k}.$objext
- objlist=$obj
- len=1
- fi
- done
- # Handle the remaining objects by creating one last
- # reloadable object file. All subsequent reloadable object
- # files will link in the last one created.
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-
- if ${skipped_export-false}; then
- $show "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $run $rm $export_symbols
- libobjs=$output
- # Append the command to create the export file.
- eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
- fi
-
- # Set up a command to remove the reloadable object files
- # after they are used.
- i=0
- while test "$i" -lt "$k"
- do
- i=`expr $i + 1`
- delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
- done
-
- $echo "creating a temporary reloadable object file: $output"
-
- # Loop through the commands generated above and execute them.
- save_ifs="$IFS"; IFS='~'
- for cmd in $concat_cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- libobjs=$output
- # Restore the value of output.
- output=$save_output
-
- if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- fi
- # Expand the library linking commands again to reset the
- # value of $libobjs for piecewise linking.
-
- # Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
- cmds=$module_expsym_cmds
- else
- cmds=$module_cmds
- fi
- else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- cmds=$archive_expsym_cmds
- else
- cmds=$archive_cmds
- fi
- fi
-
- # Append the command to remove the reloadable object files
- # to the just-reset $cmds.
- eval cmds=\"\$cmds~\$rm $delfiles\"
- fi
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || {
- lt_exit=$?
-
- # Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv
${realname}U $realname)'
- fi
-
- exit $lt_exit
- }
- done
- IFS="$save_ifs"
-
- # Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname
${realname}T && $mv "$realname"U $realname)' || exit $?
-
- if test -n "$convenience"; then
- if test -z "$whole_archive_flag_spec"; then
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- fi
- fi
-
- exit $EXIT_SUCCESS
- fi
-
- # Create links to the real library.
- for linkname in $linknames; do
- if test "$realname" != "$linkname"; then
- $show "(cd $output_objdir && $rm $linkname && $LN_S $realname
$linkname)"
- $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname
$linkname)' || exit $?
- fi
- done
-
- # If -module or -export-dynamic was specified, set the dlname.
- if test "$module" = yes || test "$export_dynamic" = yes; then
- # On all known operating systems, these are identical.
- dlname="$soname"
- fi
- fi
- ;;
-
- obj)
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
- fi
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
- fi
-
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
- fi
-
- if test -n "$xrpath"; then
- $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
- fi
-
- case $output in
- *.lo)
- if test -n "$objs$old_deplibs"; then
- $echo "$modename: cannot build library object \`$output' from
non-libtool objects" 1>&2
- exit $EXIT_FAILURE
- fi
- libobj="$output"
- obj=`$echo "X$output" | $Xsed -e "$lo2o"`
- ;;
- *)
- libobj=
- obj="$output"
- ;;
- esac
-
- # Delete the old objects.
- $run $rm $obj $libobj
-
- # Objects from convenience libraries. This assumes
- # single-version convenience libraries. Whenever we create
- # different ones for PIC/non-PIC, this we'll have to duplicate
- # the extraction.
- reload_conv_objs=
- gentop=
- # reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec and hope we can get by with
- # turning comma into space..
- wl=
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
- reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" |
$Xsed -e 's|,| |g'`
- else
- gentop="$output_objdir/${obj}x"
- generated="$generated $gentop"
-
- func_extract_archives $gentop $convenience
- reload_conv_objs="$reload_objs $func_extract_archives_result"
- fi
- fi
-
- # Create the old-style object.
- reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e
'/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ###
testsuite: skip nested quoting test
-
- output="$obj"
- cmds=$reload_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- # Exit if we aren't doing a library object file.
- if test -z "$libobj"; then
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- exit $EXIT_SUCCESS
- fi
-
- if test "$build_libtool_libs" != yes; then
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- # Create an invalid libtool object if no PIC, so that we don't
- # accidentally link it into a program.
- # $show "echo timestamp > $libobj"
- # $run eval "echo timestamp > $libobj" || exit $?
- exit $EXIT_SUCCESS
- fi
-
- if test -n "$pic_flag" || test "$pic_mode" != default; then
- # Only do commands if we really have different PIC objects.
- reload_objs="$libobjs $reload_conv_objs"
- output="$libobj"
- cmds=$reload_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
-
- if test -n "$gentop"; then
- $show "${rm}r $gentop"
- $run ${rm}r $gentop
- fi
-
- exit $EXIT_SUCCESS
- ;;
-
- prog)
- case $host in
- *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
- esac
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored for programs"
1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
- fi
-
- if test "$preload" = yes; then
- if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
- test "$dlopen_self_static" = unknown; then
- $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no
dlopen support."
- fi
- fi
-
- case $host in
- *-*-rhapsody* | *-*-darwin1.[012])
- # On Rhapsody replace the C library is the System framework
- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc /
-framework System /'`
- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc /
-framework System /'`
- ;;
- esac
-
- case $host in
- *darwin*)
- # Don't allow lazy linking, it breaks C++ global constructors
- if test "$tagname" = CXX ; then
- compile_command="$compile_command ${wl}-bind_at_load"
- finalize_command="$finalize_command ${wl}-bind_at_load"
- fi
- ;;
- esac
-
-
- # move library search paths that coincide with paths to not yet
- # installed libraries to the beginning of the library search list
- new_libs=
- for path in $notinst_path; do
- case " $new_libs " in
- *" -L$path/$objdir "*) ;;
- *)
- case " $compile_deplibs " in
- *" -L$path/$objdir "*)
- new_libs="$new_libs -L$path/$objdir" ;;
- esac
- ;;
- esac
- done
- for deplib in $compile_deplibs; do
- case $deplib in
- -L*)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- ;;
- *) new_libs="$new_libs $deplib" ;;
- esac
- done
- compile_deplibs="$new_libs"
-
-
- compile_command="$compile_command $compile_deplibs"
- finalize_command="$finalize_command $finalize_deplibs"
-
- if test -n "$rpath$xrpath"; then
- # If the user specified any rpath flags, then add them.
- for libdir in $rpath $xrpath; do
- # This is the magic to use -rpath.
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
- esac
- done
- fi
-
- # Now hardcode the library paths
- rpath=
- hardcode_libdirs=
- for libdir in $compile_rpath $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case
$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
-
hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
- testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
- case :$dllsearchpath: in
- *":$libdir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$libdir";;
- esac
- case :$dllsearchpath: in
- *":$testbindir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$testbindir";;
- esac
- ;;
- esac
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- compile_rpath="$rpath"
-
- rpath=
- hardcode_libdirs=
- for libdir in $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case
$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
-
hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$finalize_perm_rpath " in
- *" $libdir "*) ;;
- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- finalize_rpath="$rpath"
-
- if test -n "$libobjs" && test "$build_old_libs" = yes; then
- # Transform all the library objects into standard objects.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o"
| $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e
"$lo2o" | $NL2SP`
- fi
-
- dlsyms=
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- if test -n "$NM" && test -n "$global_symbol_pipe"; then
- dlsyms="${outputname}S.c"
- else
- $echo "$modename: not configured to extract global symbols from
dlpreopened files" 1>&2
- fi
- fi
-
- if test -n "$dlsyms"; then
- case $dlsyms in
- "") ;;
- *.c)
- # Discover the nlist of each of the dlfiles.
- nlist="$output_objdir/${outputname}.nm"
-
- $show "$rm $nlist ${nlist}S ${nlist}T"
- $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
- # Parse the name list into a source file.
- $show "creating $output_objdir/$dlsyms"
-
- test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
- if test "$dlself" = yes; then
- $show "generating symbol list for \`$output'"
-
- test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
- # Add our own program objects to the symbol list.
- progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" |
$NL2SP`
- for arg in $progfiles; do
- $show "extracting global C symbols from \`$arg'"
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -n "$exclude_expsyms"; then
- $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- if test -n "$export_symbols_regex"; then
- $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
- $run eval '$mv "$nlist"T "$nlist"'
- fi
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$outputname.exp"
- $run $rm $export_symbols
- $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.*
\(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
- case $host in
- *cygwin* | *mingw* )
- $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
- $run eval 'cat "$export_symbols" >>
"$output_objdir/$outputname.def"'
- ;;
- esac
- else
- $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e
's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
- $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" >
"$nlist"T'
- $run eval 'mv "$nlist"T "$nlist"'
- case $host in
- *cygwin* | *mingw* )
- $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
- $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- fi
- fi
-
- for arg in $dlprefiles; do
- $show "extracting global C symbols from \`$arg'"
- name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
- $run eval '$echo ": $name " >> "$nlist"'
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -z "$run"; then
- # Make sure we have at least an empty file.
- test -f "$nlist" || : > "$nlist"
-
- if test -n "$exclude_expsyms"; then
- $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
- $mv "$nlist"T "$nlist"
- fi
-
- # Try sorting and uniquifying the output.
- if grep -v "^: " < "$nlist" |
- if sort -k 3 </dev/null >/dev/null 2>&1; then
- sort -k 3
- else
- sort +2
- fi |
- uniq > "$nlist"S; then
- :
- else
- grep -v "^: " < "$nlist" > "$nlist"S
- fi
-
- if test -f "$nlist"S; then
- eval "$global_symbol_to_cdecl"' < "$nlist"S >>
"$output_objdir/$dlsyms"'
- else
- $echo '/* NONE */' >> "$output_objdir/$dlsyms"
- fi
-
- $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-"
-
- case $host in
- *cygwin* | *mingw* )
- $echo >> "$output_objdir/$dlsyms" "\
-/* DATA imports from DLLs on WIN32 can't be const, because
- runtime relocations are performed -- see ld's documentation
- on pseudo-relocs */
-struct {
-"
- ;;
- * )
- $echo >> "$output_objdir/$dlsyms" "\
-const struct {
-"
- ;;
- esac
-
-
- $echo >> "$output_objdir/$dlsyms" "\
- const char *name;
- lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
- eval "$global_symbol_to_c_name_address" < "$nlist" >>
"$output_objdir/$dlsyms"
-
- $echo >> "$output_objdir/$dlsyms" "\
- {0, (lt_ptr) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
- return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
- fi
-
- pic_flag_for_symtable=
- case $host in
- # compiling the symbol table file with pic_flag works around
- # a FreeBSD bug that causes programs to crash when -lm is
- # linked before any other PIC object. But we must not use
- # pic_flag when linking with -static. The problem exists in
- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
- case "$compile_command " in
- *" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
- esac;;
- *-*-hpux*)
- case "$compile_command " in
- *" -static "*) ;;
- *) pic_flag_for_symtable=" $pic_flag";;
- esac
- esac
-
- # Now compile the dynamic symbol file.
- $show "(cd $output_objdir && $LTCC $LTCFLAGS
-c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
- $run eval '(cd $output_objdir && $LTCC $LTCFLAGS
-c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
- # Clean up the generated files.
- $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
- $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
- # Transform the symbol file into the correct name.
- case $host in
- *cygwin* | *mingw* )
- if test -f "$output_objdir/${outputname}.def" ; then
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e
"address@hidden@%$output_objdir/${outputname}.def
$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e
"address@hidden@%$output_objdir/${outputname}.def
$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- else
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- fi
- ;;
- * )
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e
"address@hidden@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
- ;;
- esac
- ;;
- *)
- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- else
- # We keep going just in case the user didn't refer to
- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
- # really was required.
-
- # Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%
@address@hidden" | $NL2SP`
- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%
@address@hidden" | $NL2SP`
- fi
-
- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
- # Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e
'address@hidden@%'"$output"'%g' | $NL2SP`
- link_command="$compile_command$compile_rpath"
-
- # We have no uninstalled library dependencies, so finalize right now.
- $show "$link_command"
- $run eval "$link_command"
- exit_status=$?
-
- # Delete the generated files.
- if test -n "$dlsyms"; then
- $show "$rm $output_objdir/${outputname}S.${objext}"
- $run $rm "$output_objdir/${outputname}S.${objext}"
- fi
-
- exit $exit_status
- fi
-
- if test -n "$shlibpath_var"; then
- # We should set the shlibpath_var
- rpath=
- for dir in $temp_rpath; do
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*)
- # Absolute path.
- rpath="$rpath$dir:"
- ;;
- *)
- # Relative path: add a thisdir entry.
- rpath="$rpath\$thisdir/$dir:"
- ;;
- esac
- done
- temp_rpath="$rpath"
- fi
-
- if test -n "$compile_shlibpath$finalize_shlibpath"; then
-
compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\"
$compile_command"
- fi
- if test -n "$finalize_shlibpath"; then
-
finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\"
$finalize_command"
- fi
-
- compile_var=
- finalize_var=
- if test -n "$runpath_var"; then
- if test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- rpath="$rpath$dir:"
- done
- compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- if test -n "$finalize_perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $finalize_perm_rpath; do
- rpath="$rpath$dir:"
- done
- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- fi
-
- if test "$no_install" = yes; then
- # We don't need to create a wrapper script.
- link_command="$compile_var$compile_command$compile_rpath"
- # Replace the output file specification.
- link_command=`$echo "X$link_command" | $Xsed -e
'address@hidden@%'"$output"'%g'`
- # Delete the old output file.
- $run $rm $output
- # Link the executable and exit
- $show "$link_command"
- $run eval "$link_command" || exit $?
- exit $EXIT_SUCCESS
- fi
-
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
-
- $echo "$modename: warning: this platform does not like uninstalled
shared libraries" 1>&2
- $echo "$modename: \`$output' will be relinked during installation" 1>&2
- else
- if test "$fast_install" != no; then
- link_command="$finalize_var$compile_command$finalize_rpath"
- if test "$fast_install" = yes; then
- relink_command=`$echo "X$compile_var$compile_command$compile_rpath"
| $SP2NL | $Xsed -e 'address@hidden@%\$progdir/\$file%g' | $NL2SP`
- else
- # fast_install is set to needless
- relink_command=
- fi
- else
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
- fi
- fi
-
- # Replace the output file specification.
- link_command=`$echo "X$link_command" | $Xsed -e
'address@hidden@%'"$output_objdir/$outputname"'%g'`
-
- # Delete the old output files.
- $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
- $show "$link_command"
- $run eval "$link_command" || exit $?
-
- # Now create the wrapper script.
- $show "creating $output"
-
- # Quote the relink command for shipping.
- if test -n "$relink_command"; then
- # Preserve any variables that may affect compiler behavior
- for var in $variables_saved_for_relink; do
- if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || unset $var || {
$var=; export $var; }; }; $relink_command"
- elif eval var_value=\$$var; test -z "$var_value"; then
- relink_command="$var=; export $var; $relink_command"
- else
- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
- relink_command="$var=\"$var_value\"; export $var; $relink_command"
- fi
- done
- relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e
"$sed_quote_subst" | $NL2SP`
- fi
-
- # Quote $echo for shipping.
- if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
- case $progpath in
- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
- *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
- esac
- qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
- else
- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
- fi
-
- # Only actually do things if our run command is non-null.
- if test -z "$run"; then
- # win32 will think the script is a binary if it has
- # a .exe suffix, so we strip it off here.
- case $output in
- *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
- esac
- # test for cygwin because mv fails w/o .exe extensions
- case $host in
- *cygwin*)
- exeext=.exe
- outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
- *) exeext= ;;
- esac
- case $host in
- *cygwin* | *mingw* )
- output_name=`basename $output`
- output_path=`dirname $output`
- cwrappersource="$output_path/$objdir/lt-$output_name.c"
- cwrapper="$output_path/$output_name.exe"
- $rm $cwrappersource $cwrapper
- trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
- cat > $cwrappersource <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
- Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-
- The $output program cannot be directly executed until all the libtool
- libraries that it depends on are installed.
-
- This wrapper executable should never be moved out of the build directory.
- If it is, it will not operate correctly.
-
- Currently, it simply execs the wrapper *script* "/bin/sh $output",
- but could eventually absorb all of the scripts functionality and
- exec $objdir/$outputname directly.
-*/
-EOF
- cat >> $cwrappersource<<"EOF"
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <sys/stat.h>
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
- defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# ifndef DIR_SEPARATOR_2
-# define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-# define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
- (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-
-#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
- if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-/* -DDEBUG is fairly common in CFLAGS. */
-#undef DEBUG
-#if defined DEBUGWRAPPER
-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
-#else
-# define DEBUG(format, ...)
-#endif
-
-const char *program_name = NULL;
-
-void * xmalloc (size_t num);
-char * xstrdup (const char *string);
-const char * base_name (const char *name);
-char * find_executable(const char *wrapper);
-int check_executable(const char *path);
-char * strendzap(char *str, const char *pat);
-void lt_fatal (const char *message, ...);
-
-int
-main (int argc, char *argv[])
-{
- char **newargz;
- int i;
-
- program_name = (char *) xstrdup (base_name (argv[0]));
- DEBUG("(main) argv[0] : %s\n",argv[0]);
- DEBUG("(main) program_name : %s\n",program_name);
- newargz = XMALLOC(char *, argc+2);
-EOF
-
- cat >> $cwrappersource <<EOF
- newargz[0] = (char *) xstrdup("$SHELL");
-EOF
-
- cat >> $cwrappersource <<"EOF"
- newargz[1] = find_executable(argv[0]);
- if (newargz[1] == NULL)
- lt_fatal("Couldn't find %s", argv[0]);
- DEBUG("(main) found exe at : %s\n",newargz[1]);
- /* we know the script has the same name, without the .exe */
- /* so make sure newargz[1] doesn't end in .exe */
- strendzap(newargz[1],".exe");
- for (i = 1; i < argc; i++)
- newargz[i+1] = xstrdup(argv[i]);
- newargz[argc+1] = NULL;
-
- for (i=0; i<argc+1; i++)
- {
- DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]);
- ;
- }
-
-EOF
-
- case $host_os in
- mingw*)
- cat >> $cwrappersource <<EOF
- execv("$SHELL",(char const **)newargz);
-EOF
- ;;
- *)
- cat >> $cwrappersource <<EOF
- execv("$SHELL",newargz);
-EOF
- ;;
- esac
-
- cat >> $cwrappersource <<"EOF"
- return 127;
-}
-
-void *
-xmalloc (size_t num)
-{
- void * p = (void *) malloc (num);
- if (!p)
- lt_fatal ("Memory exhausted");
-
- return p;
-}
-
-char *
-xstrdup (const char *string)
-{
- return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) :
NULL
-;
-}
-
-const char *
-base_name (const char *name)
-{
- const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- /* Skip over the disk name in MSDOS pathnames. */
- if (isalpha ((unsigned char)name[0]) && name[1] == ':')
- name += 2;
-#endif
-
- for (base = name; *name; name++)
- if (IS_DIR_SEPARATOR (*name))
- base = name + 1;
- return base;
-}
-
-int
-check_executable(const char * path)
-{
- struct stat st;
-
- DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") :
"NULL!");
- if ((!path) || (!*path))
- return 0;
-
- if ((stat (path, &st) >= 0) &&
- (
- /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
-#if defined (S_IXOTH)
- ((st.st_mode & S_IXOTH) == S_IXOTH) ||
-#endif
-#if defined (S_IXGRP)
- ((st.st_mode & S_IXGRP) == S_IXGRP) ||
-#endif
- ((st.st_mode & S_IXUSR) == S_IXUSR))
- )
- return 1;
- else
- return 0;
-}
-
-/* Searches for the full path of the wrapper. Returns
- newly allocated full path name if found, NULL otherwise */
-char *
-find_executable (const char* wrapper)
-{
- int has_slash = 0;
- const char* p;
- const char* p_next;
- /* static buffer for getcwd */
- char tmp[LT_PATHMAX + 1];
- int tmp_len;
- char* concat_name;
-
- DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!")
: "NULL!");
-
- if ((wrapper == NULL) || (*wrapper == '\0'))
- return NULL;
-
- /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
- {
- concat_name = xstrdup (wrapper);
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
- else
- {
-#endif
- if (IS_DIR_SEPARATOR (wrapper[0]))
- {
- concat_name = xstrdup (wrapper);
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- }
-#endif
-
- for (p = wrapper; *p; p++)
- if (*p == '/')
- {
- has_slash = 1;
- break;
- }
- if (!has_slash)
- {
- /* no slashes; search PATH */
- const char* path = getenv ("PATH");
- if (path != NULL)
- {
- for (p = path; *p; p = p_next)
- {
- const char* q;
- size_t p_len;
- for (q = p; *q; q++)
- if (IS_PATH_SEPARATOR(*q))
- break;
- p_len = q - p;
- p_next = (*q == '\0' ? q : q + 1);
- if (p_len == 0)
- {
- /* empty path: current directory */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
- tmp_len = strlen(tmp);
- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
- concat_name[tmp_len] = '/';
- strcpy (concat_name + tmp_len + 1, wrapper);
- }
- else
- {
- concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, p, p_len);
- concat_name[p_len] = '/';
- strcpy (concat_name + p_len + 1, wrapper);
- }
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- }
- }
- /* not found in PATH; assume curdir */
- }
- /* Relative path | not found in path: prepend cwd */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
- tmp_len = strlen(tmp);
- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
- concat_name[tmp_len] = '/';
- strcpy (concat_name + tmp_len + 1, wrapper);
-
- if (check_executable(concat_name))
- return concat_name;
- XFREE(concat_name);
- return NULL;
-}
-
-char *
-strendzap(char *str, const char *pat)
-{
- size_t len, patlen;
-
- assert(str != NULL);
- assert(pat != NULL);
-
- len = strlen(str);
- patlen = strlen(pat);
-
- if (patlen <= len)
- {
- str += len - patlen;
- if (strcmp(str, pat) == 0)
- *str = '\0';
- }
- return str;
-}
-
-static void
-lt_error_core (int exit_status, const char * mode,
- const char * message, va_list ap)
-{
- fprintf (stderr, "%s: %s: ", program_name, mode);
- vfprintf (stderr, message, ap);
- fprintf (stderr, ".\n");
-
- if (exit_status >= 0)
- exit (exit_status);
-}
-
-void
-lt_fatal (const char *message, ...)
-{
- va_list ap;
- va_start (ap, message);
- lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
- va_end (ap);
-}
-EOF
- # we should really use a build-platform specific compiler
- # here, but OTOH, the wrappers (shell script and this C one)
- # are only useful if you want to execute the "real" binary.
- # Since the "real" binary is built for $host, then this
- # wrapper might as well be built for $host, too.
- $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
- ;;
- esac
- $rm $output
- trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
-
- $echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on \${1+\"address@hidden"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"address@hidden"}'='\"address@hidden"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
- # install mode needs the following variable:
- notinst_deplibs='$notinst_deplibs'
-else
- # When we are sourced in execute mode, \$file and \$echo are already set.
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- echo=\"$qecho\"
- file=\"\$0\"
- # Make sure echo works.
- if test \"X\$1\" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
- elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
- # Yippee, \$echo works!
- :
- else
- # Restart under the correct shell, and then maybe \$echo will work.
- exec $SHELL \"\$0\" --no-reexec \${1+\"address@hidden"}
- fi
- fi\
-"
- $echo >> $output "\
-
- # Find the directory that this script lives in.
- thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
- # Follow symbolic links until we get to the real thisdir.
- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
- while test -n \"\$file\"; do
- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
- # If there was a directory component, then change thisdir.
- if test \"x\$destdir\" != \"x\$file\"; then
- case \"\$destdir\" in
- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
- *) thisdir=\"\$thisdir/\$destdir\" ;;
- esac
- fi
-
- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
- done
-
- # Try to get the absolute directory name.
- absdir=\`cd \"\$thisdir\" && pwd\`
- test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
- if test "$fast_install" = yes; then
- $echo >> $output "\
- program=lt-'$outputname'$exeext
- progdir=\"\$thisdir/$objdir\"
-
- if test ! -f \"\$progdir/\$program\" || \\
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\"
2>/dev/null | ${SED} 1q\`; \\
- test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
- file=\"\$\$-\$program\"
-
- if test ! -d \"\$progdir\"; then
- $mkdir \"\$progdir\"
- else
- $rm \"\$progdir/\$file\"
- fi"
-
- $echo >> $output "\
-
- # relink executable if necessary
- if test -n \"\$relink_command\"; then
- if relink_command_output=\`eval \$relink_command 2>&1\`; then :
- else
- $echo \"\$relink_command_output\" >&2
- $rm \"\$progdir/\$file\"
- exit $EXIT_FAILURE
- fi
- fi
-
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
- { $rm \"\$progdir/\$program\";
- $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
- $rm \"\$progdir/\$file\"
- fi"
- else
- $echo >> $output "\
- program='$outputname'
- progdir=\"\$thisdir/$objdir\"
-"
- fi
-
- $echo >> $output "\
-
- if test -f \"\$progdir/\$program\"; then"
-
- # Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n
"$shlibpath_var" && test -n "$temp_rpath"; then
- $echo >> $output "\
- # Add our own library path to $shlibpath_var
- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
- # Some systems cannot cope with colon-terminated $shlibpath_var
- # The second colon is a workaround for a bug in BeOS R4 sed
- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
- export $shlibpath_var
-"
- fi
-
- # fixup the dll searchpath if we need to.
- if test -n "$dllsearchpath"; then
- $echo >> $output "\
- # Add the dll search path components to the executable PATH
- PATH=$dllsearchpath:\$PATH
-"
- fi
-
- $echo >> $output "\
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- # Run the actual program with our arguments.
-"
- case $host in
- # Backslashes separate directories on plain windows
- *-*-mingw | *-*-os2*)
- $echo >> $output "\
- exec \"\$progdir\\\\\$program\" \${1+\"address@hidden"}
-"
- ;;
-
- *)
- $echo >> $output "\
- exec \"\$progdir/\$program\" \${1+\"address@hidden"}
-"
- ;;
- esac
- $echo >> $output "\
- \$echo \"\$0: cannot exec \$program \$*\"
- exit $EXIT_FAILURE
- fi
- else
- # The program doesn't exist.
- \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
- \$echo \"This script is just a wrapper for \$program.\" 1>&2
- $echo \"See the $PACKAGE documentation for more information.\" 1>&2
- exit $EXIT_FAILURE
- fi
-fi\
-"
- chmod +x $output
- fi
- exit $EXIT_SUCCESS
- ;;
- esac
-
- # See if we need to build an old-fashioned archive.
- for oldlib in $oldlibs; do
-
- if test "$build_libtool_libs" = convenience; then
- oldobjs="$libobjs_save"
- addlibs="$convenience"
- build_libtool_libs=no
- else
- if test "$build_libtool_libs" = module; then
- oldobjs="$libobjs_save"
- build_libtool_libs=no
- else
- oldobjs="$old_deplibs $non_pic_objects"
- fi
- addlibs="$old_convenience"
- fi
-
- if test -n "$addlibs"; then
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- func_extract_archives $gentop $addlibs
- oldobjs="$oldobjs $func_extract_archives_result"
- fi
-
- # Do each command in the archive commands.
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" =
yes; then
- cmds=$old_archive_from_new_cmds
- else
- # POSIX demands no paths to be encoded in archives. We have
- # to avoid creating archives with duplicate basenames if we
- # might have to extract them afterwards, e.g., when creating a
- # static archive out of a convenience library, or when linking
- # the entirety of a libtool archive into another (currently
- # not supported by libtool).
- if (for obj in $oldobjs
- do
- $echo "X$obj" | $Xsed -e 's%^.*/%%'
- done | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "copying selected object files to avoid basename conflicts..."
-
- if test -z "$gentop"; then
- gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
-
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- exit_status=$?
- if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
- exit $exit_status
- fi
- fi
-
- save_oldobjs=$oldobjs
- oldobjs=
- counter=1
- for obj in $save_oldobjs
- do
- objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
- case " $oldobjs " in
- " ") oldobjs=$obj ;;
- *[\ /]"$objbase "*)
- while :; do
- # Make sure we don't pick an alternate name that also
- # overlaps.
- newobj=lt$counter-$objbase
- counter=`expr $counter + 1`
- case " $oldobjs " in
- *[\ /]"$newobj "*) ;;
- *) if test ! -f "$gentop/$newobj"; then break; fi ;;
- esac
- done
- $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
- $run ln "$obj" "$gentop/$newobj" ||
- $run cp "$obj" "$gentop/$newobj"
- oldobjs="$oldobjs $gentop/$newobj"
- ;;
- *) oldobjs="$oldobjs $obj" ;;
- esac
- done
- fi
-
- eval cmds=\"$old_archive_cmds\"
-
- if len=`expr "X$cmds" : ".*"` &&
- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- cmds=$old_archive_cmds
- else
- # the command line is too long to link in one step, link in parts
- $echo "using piecewise archive linking..."
- save_RANLIB=$RANLIB
- RANLIB=:
- objlist=
- concat_cmds=
- save_oldobjs=$oldobjs
-
- # Is there a better way of finding the last object in the list?
- for obj in $save_oldobjs
- do
- last_oldobj=$obj
- done
- for obj in $save_oldobjs
- do
- oldobjs="$objlist $obj"
- objlist="$objlist $obj"
- eval test_cmds=\"$old_archive_cmds\"
- if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
- test "$len" -le "$max_cmd_len"; then
- :
- else
- # the above command should be used before it gets too long
- oldobjs=$objlist
- if test "$obj" = "$last_oldobj" ; then
- RANLIB=$save_RANLIB
- fi
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
- objlist=
- fi
- done
- RANLIB=$save_RANLIB
- oldobjs=$objlist
- if test "X$oldobjs" = "X" ; then
- eval cmds=\"\$concat_cmds\"
- else
- eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
- fi
- fi
- fi
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- eval cmd=\"$cmd\"
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- done
-
- if test -n "$generated"; then
- $show "${rm}r$generated"
- $run ${rm}r$generated
- fi
-
- # Now create the libtool archive.
- case $output in
- *.la)
- old_library=
- test "$build_old_libs" = yes && old_library="$libname.$libext"
- $show "creating $output"
-
- # Preserve any variables that may affect compiler behavior
- for var in $variables_saved_for_relink; do
- if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=;
export $var; }; }; $relink_command"
- elif eval var_value=\$$var; test -z "$var_value"; then
- relink_command="$var=; export $var; $relink_command"
- else
- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
- relink_command="$var=\"$var_value\"; export $var; $relink_command"
- fi
- done
- # Quote the link command for shipping.
- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink
$libtool_args @inst_prefix_dir@)"
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e
"$sed_quote_subst" | $NL2SP`
- if test "$hardcode_automatic" = yes ; then
- relink_command=
- fi
-
-
- # Only create the output if not a dry run.
- if test -z "$run"; then
- for installed in no yes; do
- if test "$installed" = yes; then
- if test -z "$install_libdir"; then
- break
- fi
- output="$output_objdir/$outputname"i
- # Replace all uninstalled libtool libraries with the installed ones
- newdependency_libs=
- for deplib in $dependency_libs; do
- case $deplib in
- *.la)
- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- if test -z "$libdir"; then
- $echo "$modename: \`$deplib' is not a valid libtool archive"
1>&2
- exit $EXIT_FAILURE
- fi
- newdependency_libs="$newdependency_libs $libdir/$name"
- ;;
- *) newdependency_libs="$newdependency_libs $deplib" ;;
- esac
- done
- dependency_libs="$newdependency_libs"
- newdlfiles=
- for lib in $dlfiles; do
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- if test -z "$libdir"; then
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdlfiles="$newdlfiles $libdir/$name"
- done
- dlfiles="$newdlfiles"
- newdlprefiles=
- for lib in $dlprefiles; do
- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- if test -z "$libdir"; then
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit $EXIT_FAILURE
- fi
- newdlprefiles="$newdlprefiles $libdir/$name"
- done
- dlprefiles="$newdlprefiles"
- else
- newdlfiles=
- for lib in $dlfiles; do
- case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
- *) abs=`pwd`"/$lib" ;;
- esac
- newdlfiles="$newdlfiles $abs"
- done
- dlfiles="$newdlfiles"
- newdlprefiles=
- for lib in $dlprefiles; do
- case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
- *) abs=`pwd`"/$lib" ;;
- esac
- newdlprefiles="$newdlprefiles $abs"
- done
- dlprefiles="$newdlprefiles"
- fi
- $rm $output
- # place dlname in correct position for cygwin
- tdlname=$dlname
- case $host,$output,$installed,$module,$dlname in
- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll)
tdlname=../bin/$dlname ;;
- esac
- $echo > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Should we warn about portability when linking against -modules?
-shouldnotlink=$module
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
- if test "$installed" = no && test "$need_relink" = yes; then
- $echo >> $output "\
-relink_command=\"$relink_command\""
- fi
- done
- fi
-
- # Do a symbolic link so that the libtool archive can be found in
- # LD_LIBRARY_PATH before the program is installed.
- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname
$outputname)"
- $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname
$outputname)' || exit $?
- ;;
- esac
- exit $EXIT_SUCCESS
- ;;
-
- # libtool install mode
- install)
- modename="$modename: install"
-
- # There may be an optional sh(1) argument at the beginning of
- # install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
- # Allow the use of GNU shtool's install command.
- $echo "X$nonopt" | grep shtool > /dev/null; then
- # Aesthetically quote it.
- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$arg "
- arg="$1"
- shift
- else
- install_prog=
- arg=$nonopt
- fi
-
- # The real first argument should be the name of the installation program.
- # Aesthetically quote it.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog$arg"
-
- # We need to accept at least all the BSD install flags.
- dest=
- files=
- opts=
- prev=
- install_type=
- isdir=no
- stripme=
- for arg
- do
- if test -n "$dest"; then
- files="$files $dest"
- dest=$arg
- continue
- fi
-
- case $arg in
- -d) isdir=yes ;;
- -f)
- case " $install_prog " in
- *[\\\ /]cp\ *) ;;
- *) prev=$arg ;;
- esac
- ;;
- -g | -m | -o) prev=$arg ;;
- -s)
- stripme=" -s"
- continue
- ;;
- -*)
- ;;
- *)
- # If the previous option needed an argument, then skip it.
- if test -n "$prev"; then
- prev=
- else
- dest=$arg
- continue
- fi
- ;;
- esac
-
- # Aesthetically quote the argument.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog $arg"
- done
-
- if test -z "$install_prog"; then
- $echo "$modename: you must specify an install program" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prev' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -z "$files"; then
- if test -z "$dest"; then
- $echo "$modename: no file or destination specified" 1>&2
- else
- $echo "$modename: you must specify a destination" 1>&2
- fi
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Strip any trailing slash from the destination.
- dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
- # Check to see that the destination is a directory.
- test -d "$dest" && isdir=yes
- if test "$isdir" = yes; then
- destdir="$dest"
- destname=
- else
- destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
- test "X$destdir" = "X$dest" && destdir=.
- destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
- # Not a directory, so check to see that there is only one file specified.
- set dummy $files
- if test "$#" -gt 2; then
- $echo "$modename: \`$dest' is not a directory" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
- fi
- case $destdir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- for file in $files; do
- case $file in
- *.lo) ;;
- *)
- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
- done
- ;;
- esac
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- staticlibs=
- future_libdirs=
- current_libdirs=
- for file in $files; do
-
- # Do each installation.
- case $file in
- *.$libext)
- # Do the static libraries later.
- staticlibs="$staticlibs $file"
- ;;
-
- *.la)
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE")
>/dev/null 2>&1; then :
- else
- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- library_names=
- old_library=
- relink_command=
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Add the libdir to current_libdirs if it is the destination.
- if test "X$destdir" = "X$libdir"; then
- case "$current_libdirs " in
- *" $libdir "*) ;;
- *) current_libdirs="$current_libdirs $libdir" ;;
- esac
- else
- # Note the libdir as a future libdir.
- case "$future_libdirs " in
- *" $libdir "*) ;;
- *) future_libdirs="$future_libdirs $libdir" ;;
- esac
- fi
-
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
- test "X$dir" = "X$file/" && dir=
- dir="$dir$objdir"
-
- if test -n "$relink_command"; then
- # Determine the prefix the user has applied to our future dir.
- inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
-
- # Don't allow the user to place us outside of our expected
- # location b/c this prevents finding dependent libraries that
- # are installed to the same prefix.
- # At present, this check doesn't affect windows .dll's that
- # are installed into $libdir/../bin (currently, that works fine)
- # but it's something to keep an eye on.
- if test "$inst_prefix_dir" = "$destdir"; then
- $echo "$modename: error: cannot install \`$file' to a directory not
ending in $libdir" 1>&2
- exit $EXIT_FAILURE
- fi
-
- if test -n "$inst_prefix_dir"; then
- # Stick the inst_prefix_dir data into the link command.
- relink_command=`$echo "$relink_command" | $SP2NL | $SED
"address@hidden@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
- else
- relink_command=`$echo "$relink_command" | $SP2NL | $SED
"address@hidden@%%" | $NL2SP`
- fi
-
- $echo "$modename: warning: relinking \`$file'" 1>&2
- $show "$relink_command"
- if $run eval "$relink_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command
before installing it" 1>&2
- exit $EXIT_FAILURE
- fi
- fi
-
- # See the names of the shared library.
- set dummy $library_names
- if test -n "$2"; then
- realname="$2"
- shift
- shift
-
- srcname="$realname"
- test -n "$relink_command" && srcname="$realname"T
-
- # Install the shared library and build the symlinks.
- $show "$install_prog $dir/$srcname $destdir/$realname"
- $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
- if test -n "$stripme" && test -n "$striplib"; then
- $show "$striplib $destdir/$realname"
- $run eval "$striplib $destdir/$realname" || exit $?
- fi
-
- if test "$#" -gt 0; then
- # Delete the old symlinks, and create new ones.
- # Try `ln -sf' first, because the `ln' binary might depend on
- # the symlink we replace! Solaris /bin/ln does not understand -f,
- # so we also need to try rm && ln -s.
- for linkname
- do
- if test "$linkname" != "$realname"; then
- $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm
$linkname && $LN_S $realname $linkname; }; })"
- $run eval "(cd $destdir && { $LN_S -f $realname $linkname || {
$rm $linkname && $LN_S $realname $linkname; }; })"
- fi
- done
- fi
-
- # Do each command in the postinstall commands.
- lib="$destdir/$realname"
- cmds=$postinstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || {
- lt_exit=$?
-
- # Restore the uninstalled library and exit
- if test "$mode" = relink; then
- $run eval '(cd $output_objdir && $rm ${realname}T && $mv
${realname}U $realname)'
- fi
-
- exit $lt_exit
- }
- done
- IFS="$save_ifs"
- fi
-
- # Install the pseudo-library for information purposes.
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- instname="$dir/$name"i
- $show "$install_prog $instname $destdir/$name"
- $run eval "$install_prog $instname $destdir/$name" || exit $?
-
- # Maybe install the static library, too.
- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
- ;;
-
- *.lo)
- # Install (i.e. copy) a libtool object.
-
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # Deduce the name of the destination old-style object file.
- case $destfile in
- *.lo)
- staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
- ;;
- *.$objext)
- staticdest="$destfile"
- destfile=
- ;;
- *)
- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- # Install the libtool object if requested.
- if test -n "$destfile"; then
- $show "$install_prog $file $destfile"
- $run eval "$install_prog $file $destfile" || exit $?
- fi
-
- # Install the old object if enabled.
- if test "$build_old_libs" = yes; then
- # Deduce the name of the old-style object file.
- staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
- $show "$install_prog $staticobj $staticdest"
- $run eval "$install_prog \$staticobj \$staticdest" || exit $?
- fi
- exit $EXIT_SUCCESS
- ;;
-
- *)
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # If the file is missing, and there is a .exe on the end, strip it
- # because it is most likely a libtool script we actually want to
- # install
- stripped_ext=""
- case $file in
- *.exe)
- if test ! -f "$file"; then
- file=`$echo $file|${SED} 's,.exe$,,'`
- stripped_ext=".exe"
- fi
- ;;
- esac
-
- # Do a test to see if this is really a libtool program.
- case $host in
- *cygwin*|*mingw*)
- wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
- ;;
- *)
- wrapper=$file
- ;;
- esac
- if (${SED} -e '4q' $wrapper | grep "^# Generated by
.*$PACKAGE")>/dev/null 2>&1; then
- notinst_deplibs=
- relink_command=
-
- # Note that it is not necessary on cygwin/mingw to append a dot to
- # foo even if both foo and FILE.exe exist: automatic-append-.exe
- # behavior happens only for exec(3), not for open(2)! Also, sourcing
- # `FILE.' does not work on cygwin managed mounts.
- #
- # If there is no directory component, then add one.
- case $wrapper in
- */* | *\\*) . ${wrapper} ;;
- *) . ./${wrapper} ;;
- esac
-
- # Check the variables that should have been set.
- if test -z "$notinst_deplibs"; then
- $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
- exit $EXIT_FAILURE
- fi
-
- finalize=yes
- for lib in $notinst_deplibs; do
- # Check to see that each library is installed.
- libdir=
- if test -f "$lib"; then
- # If there is no directory component, then add one.
- case $lib in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
- fi
- libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ###
testsuite: skip nested quoting test
- if test -n "$libdir" && test ! -f "$libfile"; then
- $echo "$modename: warning: \`$lib' has not been installed in
\`$libdir'" 1>&2
- finalize=no
- fi
- done
-
- relink_command=
- # Note that it is not necessary on cygwin/mingw to append a dot to
- # foo even if both foo and FILE.exe exist: automatic-append-.exe
- # behavior happens only for exec(3), not for open(2)! Also, sourcing
- # `FILE.' does not work on cygwin managed mounts.
- #
- # If there is no directory component, then add one.
- case $wrapper in
- */* | *\\*) . ${wrapper} ;;
- *) . ./${wrapper} ;;
- esac
-
- outputname=
- if test "$fast_install" = no && test -n "$relink_command"; then
- if test "$finalize" = yes && test -z "$run"; then
- tmpdir=`func_mktempdir`
- file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
- outputname="$tmpdir/$file"
- # Replace the output file specification.
- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e
'address@hidden@%'"$outputname"'%g' | $NL2SP`
-
- $show "$relink_command"
- if $run eval "$relink_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command
before installing it" 1>&2
- ${rm}r "$tmpdir"
- continue
- fi
- file="$outputname"
- else
- $echo "$modename: warning: cannot relink \`$file'" 1>&2
- fi
- else
- # Install the binary that we compiled earlier.
- file=`$echo "X$file$stripped_ext" | $Xsed -e
"s%\([^/]*\)$%$objdir/\1%"`
- fi
- fi
-
- # remove .exe since cygwin /usr/bin/install will append another
- # one anyway
- case $install_prog,$host in
- */usr/bin/install*,*cygwin*)
- case $file:$destfile in
- *.exe:*.exe)
- # this is ok
- ;;
- *.exe:*)
- destfile=$destfile.exe
- ;;
- *:*.exe)
- destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
- ;;
- esac
- ;;
- esac
- $show "$install_prog$stripme $file $destfile"
- $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
- test -n "$outputname" && ${rm}r "$tmpdir"
- ;;
- esac
- done
-
- for file in $staticlibs; do
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
- # Set up the ranlib parameters.
- oldlib="$destdir/$name"
-
- $show "$install_prog $file $oldlib"
- $run eval "$install_prog \$file \$oldlib" || exit $?
-
- if test -n "$stripme" && test -n "$old_striplib"; then
- $show "$old_striplib $oldlib"
- $run eval "$old_striplib $oldlib" || exit $?
- fi
-
- # Do each command in the postinstall commands.
- cmds=$old_postinstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- done
-
- if test -n "$future_libdirs"; then
- $echo "$modename: warning: remember to run \`$progname
--finish$future_libdirs'" 1>&2
- fi
-
- if test -n "$current_libdirs"; then
- # Maybe just do a dry run.
- test -n "$run" && current_libdirs=" -n$current_libdirs"
- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
- else
- exit $EXIT_SUCCESS
- fi
- ;;
-
- # libtool finish mode
- finish)
- modename="$modename: finish"
- libdirs="$nonopt"
- admincmds=
-
- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
- for dir
- do
- libdirs="$libdirs $dir"
- done
-
- for libdir in $libdirs; do
- if test -n "$finish_cmds"; then
- # Do each command in the finish commands.
- cmds=$finish_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd" || admincmds="$admincmds
- $cmd"
- done
- IFS="$save_ifs"
- fi
- if test -n "$finish_eval"; then
- # Do the single finish_eval.
- eval cmds=\"$finish_eval\"
- $run eval "$cmds" || admincmds="$admincmds
- $cmds"
- fi
- done
- fi
-
- # Exit here if they wanted silent mode.
- test "$show" = : && exit $EXIT_SUCCESS
-
- $echo
"X----------------------------------------------------------------------" |
$Xsed
- $echo "Libraries have been installed in:"
- for libdir in $libdirs; do
- $echo " $libdir"
- done
- $echo
- $echo "If you ever happen to want to link against installed libraries"
- $echo "in a given directory, LIBDIR, you must either use libtool, and"
- $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
- $echo "flag during linking and do at least one of the following:"
- if test -n "$shlibpath_var"; then
- $echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
- $echo " during execution"
- fi
- if test -n "$runpath_var"; then
- $echo " - add LIBDIR to the \`$runpath_var' environment variable"
- $echo " during linking"
- fi
- if test -n "$hardcode_libdir_flag_spec"; then
- libdir=LIBDIR
- eval flag=\"$hardcode_libdir_flag_spec\"
-
- $echo " - use the \`$flag' linker flag"
- fi
- if test -n "$admincmds"; then
- $echo " - have your system administrator run these commands:$admincmds"
- fi
- if test -f /etc/ld.so.conf; then
- $echo " - have your system administrator add LIBDIR to
\`/etc/ld.so.conf'"
- fi
- $echo
- $echo "See any operating system documentation about shared libraries for"
- $echo "more information, such as the ld(1) and ld.so(8) manual pages."
- $echo
"X----------------------------------------------------------------------" |
$Xsed
- exit $EXIT_SUCCESS
- ;;
-
- # libtool execute mode
- execute)
- modename="$modename: execute"
-
- # The first argument is the command name.
- cmd="$nonopt"
- if test -z "$cmd"; then
- $echo "$modename: you must specify a COMMAND" 1>&2
- $echo "$help"
- exit $EXIT_FAILURE
- fi
-
- # Handle -dlopen flags immediately.
- for file in $execute_dlfiles; do
- if test ! -f "$file"; then
- $echo "$modename: \`$file' is not a file" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- dir=
- case $file in
- *.la)
- # Check to see that this really is a libtool archive.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE")
>/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Read the libtool library.
- dlname=
- library_names=
-
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Skip this library if it cannot be dlopened.
- if test -z "$dlname"; then
- # Warn if it was a shared library.
- test -n "$library_names" && $echo "$modename: warning: \`$file' was
not linked with \`-export-dynamic'"
- continue
- fi
-
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
-
- if test -f "$dir/$objdir/$dlname"; then
- dir="$dir/$objdir"
- else
- if test ! -f "$dir/$dlname"; then
- $echo "$modename: cannot find \`$dlname' in \`$dir' or
\`$dir/$objdir'" 1>&2
- exit $EXIT_FAILURE
- fi
- fi
- ;;
-
- *.lo)
- # Just add the directory containing the .lo file.
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
- ;;
-
- *)
- $echo "$modename: warning \`-dlopen' is ignored for non-libtool
libraries and objects" 1>&2
- continue
- ;;
- esac
-
- # Get the absolute pathname.
- absdir=`cd "$dir" && pwd`
- test -n "$absdir" && dir="$absdir"
-
- # Now add the directory to shlibpath_var.
- if eval "test -z \"\$$shlibpath_var\""; then
- eval "$shlibpath_var=\"\$dir\""
- else
- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
- fi
- done
-
- # This variable tells wrapper scripts just to set shlibpath_var
- # rather than running their programs.
- libtool_execute_magic="$magic"
-
- # Check if any of the arguments is a wrapper script.
- args=
- for file
- do
- case $file in
- -*) ;;
- *)
- # Do a test to see if this is really a libtool program.
- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE")
>/dev/null 2>&1; then
- # If there is no directory component, then add one.
- case $file in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Transform arg to wrapped name.
- file="$progdir/$program"
- fi
- ;;
- esac
- # Quote arguments (to preserve shell metacharacters).
- file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
- args="$args \"$file\""
- done
-
- if test -z "$run"; then
- if test -n "$shlibpath_var"; then
- # Export the shlibpath_var.
- eval "export $shlibpath_var"
- fi
-
- # Restore saved environment variables
- for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
- do
- eval "if test \"\${save_$lt_var+set}\" = set; then
- $lt_var=\$save_$lt_var; export $lt_var
- else
- $lt_unset $lt_var
- fi"
- done
-
- # Now prepare to actually exec the command.
- exec_cmd="\$cmd$args"
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
- $echo "export $shlibpath_var"
- fi
- $echo "$cmd$args"
- exit $EXIT_SUCCESS
- fi
- ;;
-
- # libtool clean and uninstall mode
- clean | uninstall)
- modename="$modename: $mode"
- rm="$nonopt"
- files=
- rmforce=
- exit_status=0
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- for arg
- do
- case $arg in
- -f) rm="$rm $arg"; rmforce=yes ;;
- -*) rm="$rm $arg" ;;
- *) files="$files $arg" ;;
- esac
- done
-
- if test -z "$rm"; then
- $echo "$modename: you must specify an RM program" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- rmdirs=
-
- origobjdir="$objdir"
- for file in $files; do
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$dir" = "X$file"; then
- dir=.
- objdir="$origobjdir"
- else
- objdir="$dir/$origobjdir"
- fi
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- test "$mode" = uninstall && objdir="$dir"
-
- # Remember objdir for removal later, being careful to avoid duplicates
- if test "$mode" = clean; then
- case " $rmdirs " in
- *" $objdir "*) ;;
- *) rmdirs="$rmdirs $objdir" ;;
- esac
- fi
-
- # Don't error if the file doesn't exist and rm -f was used.
- if (test -L "$file") >/dev/null 2>&1 \
- || (test -h "$file") >/dev/null 2>&1 \
- || test -f "$file"; then
- :
- elif test -d "$file"; then
- exit_status=1
- continue
- elif test "$rmforce" = yes; then
- continue
- fi
-
- rmfiles="$file"
-
- case $name in
- *.la)
- # Possibly a libtool archive, so verify it.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE")
>/dev/null 2>&1; then
- . $dir/$name
-
- # Delete the libtool libraries and symlinks.
- for n in $library_names; do
- rmfiles="$rmfiles $objdir/$n"
- done
- test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-
- case "$mode" in
- clean)
- case " $library_names " in
- # " " in the beginning catches empty $dlname
- *" $dlname "*) ;;
- *) rmfiles="$rmfiles $objdir/$dlname" ;;
- esac
- test -n "$libdir" && rmfiles="$rmfiles $objdir/$name
$objdir/${name}i"
- ;;
- uninstall)
- if test -n "$library_names"; then
- # Do each command in the postuninstall commands.
- cmds=$postuninstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd"
- if test "$?" -ne 0 && test "$rmforce" != yes; then
- exit_status=1
- fi
- done
- IFS="$save_ifs"
- fi
-
- if test -n "$old_library"; then
- # Do each command in the old_postuninstall commands.
- cmds=$old_postuninstall_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $show "$cmd"
- $run eval "$cmd"
- if test "$?" -ne 0 && test "$rmforce" != yes; then
- exit_status=1
- fi
- done
- IFS="$save_ifs"
- fi
- # FIXME: should reinstall the best remaining shared library.
- ;;
- esac
- fi
- ;;
-
- *.lo)
- # Possibly a libtool object, so verify it.
- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE")
>/dev/null 2>&1; then
-
- # Read the .lo file
- . $dir/$name
-
- # Add PIC object to the list of files to remove.
- if test -n "$pic_object" \
- && test "$pic_object" != none; then
- rmfiles="$rmfiles $dir/$pic_object"
- fi
-
- # Add non-PIC object to the list of files to remove.
- if test -n "$non_pic_object" \
- && test "$non_pic_object" != none; then
- rmfiles="$rmfiles $dir/$non_pic_object"
- fi
- fi
- ;;
-
- *)
- if test "$mode" = clean ; then
- noexename=$name
- case $file in
- *.exe)
- file=`$echo $file|${SED} 's,.exe$,,'`
- noexename=`$echo $name|${SED} 's,.exe$,,'`
- # $file with .exe has already been added to rmfiles,
- # add $file without .exe
- rmfiles="$rmfiles $file"
- ;;
- esac
- # Do a test to see if this is a libtool program.
- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE")
>/dev/null 2>&1; then
- relink_command=
- . $dir/$noexename
-
- # note $name still contains .exe if it was in $file originally
- # as does the version of $file that was added into $rmfiles
- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
- if test "$fast_install" = yes && test -n "$relink_command"; then
- rmfiles="$rmfiles $objdir/lt-$name"
- fi
- if test "X$noexename" != "X$name" ; then
- rmfiles="$rmfiles $objdir/lt-${noexename}.c"
- fi
- fi
- fi
- ;;
- esac
- $show "$rm $rmfiles"
- $run $rm $rmfiles || exit_status=1
- done
- objdir="$origobjdir"
-
- # Try to remove the ${objdir}s in the directories where we deleted files
- for dir in $rmdirs; do
- if test -d "$dir"; then
- $show "rmdir $dir"
- $run rmdir $dir >/dev/null 2>&1
- fi
- done
-
- exit $exit_status
- ;;
-
- "")
- $echo "$modename: you must specify a MODE" 1>&2
- $echo "$generic_help" 1>&2
- exit $EXIT_FAILURE
- ;;
- esac
-
- if test -z "$exec_cmd"; then
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$generic_help" 1>&2
- exit $EXIT_FAILURE
- fi
-fi # test -z "$show_help"
-
-if test -n "$exec_cmd"; then
- eval exec $exec_cmd
- exit $EXIT_FAILURE
-fi
-
-# We need to display help for each of the modes.
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
- --config show all configuration variables
- --debug enable verbose shell tracing
--n, --dry-run display commands without modifying any files
- --features display basic configuration information and exit
- --finish same as \`--mode=finish'
- --help display this help message and exit
- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
- --quiet same as \`--silent'
- --silent don't print informational messages
- --tag=TAG use configuration variables from tag TAG
- --version print version information
-
-MODE must be one of the following:
-
- clean remove files from the build directory
- compile compile a source file into a libtool object
- execute automatically set library path, then run a program
- finish complete the installation of libtool libraries
- install install libraries or executables
- link create a library or an executable
- uninstall remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE.
-
-Report bugs to <address@hidden>."
- exit $EXIT_SUCCESS
- ;;
-
-clean)
- $echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
- ;;
-
-compile)
- $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
- -o OUTPUT-FILE set the output file name to OUTPUT-FILE
- -prefer-pic try to building PIC objects only
- -prefer-non-pic try to building non-PIC objects only
- -static always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
- ;;
-
-execute)
- $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
- -dlopen FILE add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
- ;;
-
-finish)
- $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
- ;;
-
-install)
- $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
- ;;
-
-link)
- $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
- -all-static do not do any dynamic linking at all
- -avoid-version do not add a version suffix if possible
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
- -export-symbols SYMFILE
- try to export only the symbols listed in SYMFILE
- -export-symbols-regex REGEX
- try to export only the symbols matching REGEX
- -LLIBDIR search LIBDIR for required installed libraries
- -lNAME OUTPUT-FILE requires the installed library libNAME
- -module build a library that can dlopened
- -no-fast-install disable the fast-install mode
- -no-install link a not-installable executable
- -no-undefined declare that a library does not refer to external symbols
- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -objectlist FILE Use a list of object files found in FILE to specify objects
- -precious-files-regex REGEX
- don't remove output files matching REGEX
- -release RELEASE specify package release information
- -rpath LIBDIR the created library will eventually be installed in LIBDIR
- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
- -static do not do any dynamic linking of uninstalled libtool
libraries
- -static-libtool-libs
- do not do any dynamic linking of libtool libraries
- -version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename. Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
- ;;
-
-uninstall)
- $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
- ;;
-
-*)
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$help" 1>&2
- exit $EXIT_FAILURE
- ;;
-esac
-
-$echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit $?
-
-# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries. Given conflicting
-# choices, we go for a static library, that is the most portable,
-# since we can't tell whether shared libraries were disabled because
-# the user asked for that or because the platform doesn't support
-# them. This is particularly important on AIX, because we don't
-# support having both static and shared libraries enabled at the same
-# time on that platform, so we default to a shared-only configuration.
-# If a disable-shared tag is given, we'll fallback to a static-only
-# configuration. But we'll never go from static-only to shared-only.
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-disable_libs=shared
-# ### END LIBTOOL TAG CONFIG: disable-shared
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-disable_libs=static
-# ### END LIBTOOL TAG CONFIG: disable-static
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
diff --git a/myserver/m4/gnome-pthread-check.m4
b/myserver/m4/gnome-pthread-check.m4
deleted file mode 100644
index eb6f739..0000000
--- a/myserver/m4/gnome-pthread-check.m4
+++ /dev/null
@@ -1,17 +0,0 @@
-# Barrowed from gnome for use with MyServer
-dnl
-dnl And better, use gthreads instead...
-dnl
-
-AC_DEFUN([GNOME_PTHREAD_CHECK],[
- PTHREAD_LIB=""
- AC_CHECK_LIB(pthread, pthread_create, PTHREAD_LIB="-lpthread",
- [AC_CHECK_LIB(pthreads, pthread_create,
PTHREAD_LIB="-lpthreads",
- [AC_CHECK_LIB(c_r, pthread_create, PTHREAD_LIB="-lc_r",
- [AC_CHECK_FUNC(pthread_create)]
- )]
- )]
- )
- AC_SUBST(PTHREAD_LIB)
- AC_PROVIDE([GNOME_PTHREAD_CHECK])
-])
diff --git a/myserver/m4/iconv.m4 b/myserver/m4/iconv.m4
deleted file mode 100644
index 66bc76f..0000000
--- a/myserver/m4/iconv.m4
+++ /dev/null
@@ -1,180 +0,0 @@
-# iconv.m4 serial AM6 (gettext-0.17)
-dnl Copyright (C) 2000-2002, 2007 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
-[
- dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
-
- dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
- dnl accordingly.
- AC_LIB_LINKFLAGS_BODY([iconv])
-])
-
-AC_DEFUN([AM_ICONV_LINK],
-[
- dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
- dnl those with the standalone portable GNU libiconv installed).
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
-
- dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
- dnl accordingly.
- AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
-
- dnl Add $INCICONV to CPPFLAGS before performing the following checks,
- dnl because if the user has installed libiconv and not disabled its use
- dnl via --without-libiconv-prefix, he wants to use it. The first
- dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed.
- am_save_CPPFLAGS="$CPPFLAGS"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
-
- AC_CACHE_CHECK([for iconv], am_cv_func_iconv, [
- am_cv_func_iconv="no, consider installing GNU libiconv"
- am_cv_lib_iconv=no
- AC_TRY_LINK([#include <stdlib.h>
-#include <iconv.h>],
- [iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);],
- am_cv_func_iconv=yes)
- if test "$am_cv_func_iconv" != yes; then
- am_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBICONV"
- AC_TRY_LINK([#include <stdlib.h>
-#include <iconv.h>],
- [iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);],
- am_cv_lib_iconv=yes
- am_cv_func_iconv=yes)
- LIBS="$am_save_LIBS"
- fi
- ])
- if test "$am_cv_func_iconv" = yes; then
- AC_CACHE_CHECK([for working iconv], am_cv_func_iconv_works, [
- dnl This tests against bugs in AIX 5.1 and HP-UX 11.11.
- am_save_LIBS="$LIBS"
- if test $am_cv_lib_iconv = yes; then
- LIBS="$LIBS $LIBICONV"
- fi
- AC_TRY_RUN([
-#include <iconv.h>
-#include <string.h>
-int main ()
-{
- /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
- returns. */
- {
- iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
- if (cd_utf8_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\342\202\254"; /* EURO SIGN */
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_utf8_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- return 1;
- }
- }
-#if 0 /* This bug could be worked around by the caller. */
- /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
- {
- iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
- if (cd_88591_to_utf8 != (iconv_t)(-1))
- {
- static const char input[] = "\304rger mit b\366sen B\374bchen ohne
Augenma\337";
- char buf[50];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_88591_to_utf8,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if ((int)res > 0)
- return 1;
- }
- }
-#endif
- /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
- provided. */
- if (/* Try standardized names. */
- iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
- /* Try IRIX, OSF/1 names. */
- && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
- /* Try AIX names. */
- && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
- /* Try HP-UX names. */
- && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
- return 1;
- return 0;
-}], [am_cv_func_iconv_works=yes], [am_cv_func_iconv_works=no],
- [case "$host_os" in
- aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
- *) am_cv_func_iconv_works="guessing yes" ;;
- esac])
- LIBS="$am_save_LIBS"
- ])
- case "$am_cv_func_iconv_works" in
- *no) am_func_iconv=no am_cv_lib_iconv=no ;;
- *) am_func_iconv=yes ;;
- esac
- else
- am_func_iconv=no am_cv_lib_iconv=no
- fi
- if test "$am_func_iconv" = yes; then
- AC_DEFINE(HAVE_ICONV, 1,
- [Define if you have the iconv() function and it works.])
- fi
- if test "$am_cv_lib_iconv" = yes; then
- AC_MSG_CHECKING([how to link with libiconv])
- AC_MSG_RESULT([$LIBICONV])
- else
- dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
- dnl either.
- CPPFLAGS="$am_save_CPPFLAGS"
- LIBICONV=
- LTLIBICONV=
- fi
- AC_SUBST(LIBICONV)
- AC_SUBST(LTLIBICONV)
-])
-
-AC_DEFUN([AM_ICONV],
-[
- AM_ICONV_LINK
- if test "$am_cv_func_iconv" = yes; then
- AC_MSG_CHECKING([for iconv declaration])
- AC_CACHE_VAL(am_cv_proto_iconv, [
- AC_TRY_COMPILE([
-#include <stdlib.h>
-#include <iconv.h>
-extern
-#ifdef __cplusplus
-"C"
-#endif
-#if defined(__STDC__) || defined(__cplusplus)
-size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf,
size_t *outbytesleft);
-#else
-size_t iconv();
-#endif
-], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const")
- am_cv_proto_iconv="extern size_t iconv (iconv_t cd,
$am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf,
size_t *outbytesleft);"])
- am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/(
/(/'`
- AC_MSG_RESULT([$]{ac_t:-
- }[$]am_cv_proto_iconv)
- AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1,
- [Define as const if the declaration of iconv() needs const.])
- fi
-])
diff --git a/myserver/m4/lib-ld.m4 b/myserver/m4/lib-ld.m4
deleted file mode 100644
index 96c4e2c..0000000
--- a/myserver/m4/lib-ld.m4
+++ /dev/null
@@ -1,110 +0,0 @@
-# lib-ld.m4 serial 3 (gettext-0.13)
-dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl Subroutines of libtool.m4,
-dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
-dnl with libtool.m4.
-
-dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
-AC_DEFUN([AC_LIB_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- acl_cv_prog_gnu_ld=yes ;;
-*)
- acl_cv_prog_gnu_ld=no ;;
-esac])
-with_gnu_ld=$acl_cv_prog_gnu_ld
-])
-
-dnl From libtool-1.4. Sets the variable LD.
-AC_DEFUN([AC_LIB_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [[\\/]* | [A-Za-z]:[\\/]*)]
- [re_direlt='/[^/][^/]*/\.\./']
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(acl_cv_path_LD,
-[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- acl_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break ;;
- *)
- test "$with_gnu_ld" != yes && break ;;
- esac
- fi
- done
- IFS="$ac_save_ifs"
-else
- acl_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$acl_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_LIB_PROG_LD_GNU
-])
diff --git a/myserver/m4/lib-link.m4 b/myserver/m4/lib-link.m4
deleted file mode 100644
index e3d26fc..0000000
--- a/myserver/m4/lib-link.m4
+++ /dev/null
@@ -1,709 +0,0 @@
-# lib-link.m4 serial 13 (gettext-0.17)
-dnl Copyright (C) 2001-2007 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-AC_PREREQ(2.54)
-
-dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
-dnl augments the CPPFLAGS variable.
-dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
-dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
-AC_DEFUN([AC_LIB_LINKFLAGS],
-[
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
- define([Name],[translit([$1],[./-], [___])])
- define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
- AC_LIB_LINKFLAGS_BODY([$1], [$2])
- ac_cv_lib[]Name[]_libs="$LIB[]NAME"
- ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
- ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
- ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
- ])
- LIB[]NAME="$ac_cv_lib[]Name[]_libs"
- LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
- INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
- LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
- AC_SUBST([LIB]NAME)
- AC_SUBST([LTLIB]NAME)
- AC_SUBST([LIB]NAME[_PREFIX])
- dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
- dnl results of this search when this library appears as a dependency.
- HAVE_LIB[]NAME=yes
- undefine([Name])
- undefine([NAME])
-])
-
-dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
-dnl searches for libname and the libraries corresponding to explicit and
-dnl implicit dependencies, together with the specified include files and
-dnl the ability to compile and link the specified testcode. If found, it
-dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
-dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
-dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
-dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
-dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
-dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
-AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
-[
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
- define([Name],[translit([$1],[./-], [___])])
- define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
-
- dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
- dnl accordingly.
- AC_LIB_LINKFLAGS_BODY([$1], [$2])
-
- dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
- dnl because if the user has installed lib[]Name and not disabled its use
- dnl via --without-lib[]Name-prefix, he wants to use it.
- ac_save_CPPFLAGS="$CPPFLAGS"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
-
- AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
- ac_save_LIBS="$LIBS"
- LIBS="$LIBS $LIB[]NAME"
- AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
- LIBS="$ac_save_LIBS"
- ])
- if test "$ac_cv_lib[]Name" = yes; then
- HAVE_LIB[]NAME=yes
- AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
- AC_MSG_CHECKING([how to link with lib[]$1])
- AC_MSG_RESULT([$LIB[]NAME])
- else
- HAVE_LIB[]NAME=no
- dnl If $LIB[]NAME didn't lead to a usable library, we don't need
- dnl $INC[]NAME either.
- CPPFLAGS="$ac_save_CPPFLAGS"
- LIB[]NAME=
- LTLIB[]NAME=
- LIB[]NAME[]_PREFIX=
- fi
- AC_SUBST([HAVE_LIB]NAME)
- AC_SUBST([LIB]NAME)
- AC_SUBST([LTLIB]NAME)
- AC_SUBST([LIB]NAME[_PREFIX])
- undefine([Name])
- undefine([NAME])
-])
-
-dnl Determine the platform dependent parameters needed to use rpath:
-dnl acl_libext,
-dnl acl_shlibext,
-dnl acl_hardcode_libdir_flag_spec,
-dnl acl_hardcode_libdir_separator,
-dnl acl_hardcode_direct,
-dnl acl_hardcode_minus_L.
-AC_DEFUN([AC_LIB_RPATH],
-[
- dnl Tell automake >= 1.10 to complain if config.rpath is missing.
- m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
- AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
- AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
- AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
- AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
- CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld"
\
- ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
- . ./conftest.sh
- rm -f ./conftest.sh
- acl_cv_rpath=done
- ])
- wl="$acl_cv_wl"
- acl_libext="$acl_cv_libext"
- acl_shlibext="$acl_cv_shlibext"
- acl_libname_spec="$acl_cv_libname_spec"
- acl_library_names_spec="$acl_cv_library_names_spec"
- acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- acl_hardcode_direct="$acl_cv_hardcode_direct"
- acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
- dnl Determine whether the user wants rpath handling at all.
- AC_ARG_ENABLE(rpath,
- [ --disable-rpath do not hardcode runtime library paths],
- :, enable_rpath=yes)
-])
-
-dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
-dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
-dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
-AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
-[
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- dnl Autoconf >= 2.61 supports dots in --with options.
-
define([N_A_M_E],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit([$1],[.],[_])],[$1])])
- dnl By default, look in $includedir and $libdir.
- use_additional=yes
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- AC_LIB_ARG_WITH([lib]N_A_M_E[-prefix],
-[ --with-lib]N_A_M_E[-prefix[=DIR] search for lib$1 in DIR/include and
DIR/lib
- --without-lib]N_A_M_E[-prefix don't search for lib$1 in includedir and
libdir],
-[
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- fi
- fi
-])
- dnl Search the library and its dependencies in $additional_libdir and
- dnl $LDFLAGS. Using breadth-first-seach.
- LIB[]NAME=
- LTLIB[]NAME=
- INC[]NAME=
- LIB[]NAME[]_PREFIX=
- rpathdirs=
- ltrpathdirs=
- names_already_handled=
- names_next_round='$1 $2'
- while test -n "$names_next_round"; do
- names_this_round="$names_next_round"
- names_next_round=
- for name in $names_this_round; do
- already_handled=
- for n in $names_already_handled; do
- if test "$n" = "$name"; then
- already_handled=yes
- break
- fi
- done
- if test -z "$already_handled"; then
- names_already_handled="$names_already_handled $name"
- dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
- dnl or AC_LIB_HAVE_LINKFLAGS call.
- uppername=`echo "$name" | sed -e
'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
- eval value=\"\$HAVE_LIB$uppername\"
- if test -n "$value"; then
- if test "$value" = yes; then
- eval value=\"\$LIB$uppername\"
- test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
- eval value=\"\$LTLIB$uppername\"
- test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+
}$value"
- else
- dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
- dnl that this library doesn't exist. So just drop it.
- :
- fi
- else
- dnl Search the library lib$name in $additional_libdir and $LDFLAGS
- dnl and the already constructed $LIBNAME/$LTLIBNAME.
- found_dir=
- found_la=
- found_so=
- found_a=
- eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
- if test -n "$acl_shlibext"; then
- shrext=".$acl_shlibext" # typically: shrext=.so
- else
- shrext=
- fi
- if test $use_additional = yes; then
- dir="$additional_libdir"
- dnl The same code as in the loop below:
- dnl First look for a shared library.
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" =
'$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver";
then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- dnl Then look for a static library.
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- for x in $LDFLAGS $LTLIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- case "$x" in
- -L*)
- dir=`echo "X$x" | sed -e 's/^X-L//'`
- dnl First look for a shared library.
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" =
'$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done
\
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4
-k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f
"$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- dnl Then look for a static library.
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- ;;
- esac
- if test "X$found_dir" != "X"; then
- break
- fi
- done
- fi
- if test "X$found_dir" != "X"; then
- dnl Found the library.
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
- if test "X$found_so" != "X"; then
- dnl Linking with a shared library. We attempt to hardcode its
- dnl directory into the executable's runpath, unless it's the
- dnl standard /usr/lib.
- if test "$enable_rpath" = no || test "X$found_dir" =
"X/usr/$acl_libdirstem"; then
- dnl No hardcoding is needed.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- dnl Use an explicit option to hardcode DIR into the resulting
- dnl binary.
- dnl Potentially add DIR to ltrpathdirs.
- dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $found_dir"
- fi
- dnl The hardcoding into $LIBNAME is system dependent.
- if test "$acl_hardcode_direct" = yes; then
- dnl Using DIR/libNAME.so during linking hardcodes DIR into
the
- dnl resulting binary.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- if test -n "$acl_hardcode_libdir_flag_spec" && test
"$acl_hardcode_minus_L" = no; then
- dnl Use an explicit option to hardcode DIR into the
resulting
- dnl binary.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- dnl Potentially add DIR to rpathdirs.
- dnl The rpathdirs will be appended to $LIBNAME at the end.
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $found_dir"
- fi
- else
- dnl Rely on "-L$found_dir".
- dnl But don't add it if it's already contained in the
LDFLAGS
- dnl or the already constructed $LIBNAME
- haveit=
- for x in $LDFLAGS $LIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
- fi
- if test "$acl_hardcode_minus_L" != no; then
- dnl FIXME: Not sure whether we should use
- dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
- dnl here.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- dnl We cannot use $acl_hardcode_runpath_var and
LD_RUN_PATH
- dnl here, because this doesn't fit in flags passed to the
- dnl compiler. So give up. No hardcoding. This affects
only
- dnl very old systems.
- dnl FIXME: Not sure whether we should use
- dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
- dnl here.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
- fi
- fi
- fi
- fi
- else
- if test "X$found_a" != "X"; then
- dnl Linking with a static library.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
- else
- dnl We shouldn't come here, but anyway it's good to have a
- dnl fallback.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
- fi
- fi
- dnl Assume the include files are nearby.
- additional_includedir=
- case "$found_dir" in
- */$acl_libdirstem | */$acl_libdirstem/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e
"s,/$acl_libdirstem/"'*$,,'`
- LIB[]NAME[]_PREFIX="$basedir"
- additional_includedir="$basedir/include"
- ;;
- esac
- if test "X$additional_includedir" != "X"; then
- dnl Potentially add $additional_includedir to $INCNAME.
- dnl But don't add it
- dnl 1. if it's the standard /usr/include,
- dnl 2. if it's /usr/local/include and we are using GCC on
Linux,
- dnl 3. if it's already present in $CPPFLAGS or the already
- dnl constructed $INCNAME,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- for x in $CPPFLAGS $INC[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- dnl Really add $additional_includedir to $INCNAME.
- INC[]NAME="${INC[]NAME}${INC[]NAME:+
}-I$additional_includedir"
- fi
- fi
- fi
- fi
- fi
- dnl Look for dependencies.
- if test -n "$found_la"; then
- dnl Read the .la file. It defines the variables
- dnl dlname, library_names, old_library, dependency_libs, current,
- dnl age, revision, installed, dlopen, dlpreopen, libdir.
- save_libdir="$libdir"
- case "$found_la" in
- */* | *\\*) . "$found_la" ;;
- *) . "./$found_la" ;;
- esac
- libdir="$save_libdir"
- dnl We use only dependency_libs.
- for dep in $dependency_libs; do
- case "$dep" in
- -L*)
- additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
- dnl Potentially add $additional_libdir to $LIBNAME and
$LTLIBNAME.
- dnl But don't add it
- dnl 1. if it's the standard /usr/lib,
- dnl 2. if it's /usr/local/lib and we are using GCC on
Linux,
- dnl 3. if it's already present in $LDFLAGS or the already
- dnl constructed $LIBNAME,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem";
then
- haveit=
- if test "X$additional_libdir" =
"X/usr/local/$acl_libdirstem"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- haveit=
- for x in $LDFLAGS $LIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LIBNAME.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+
}-L$additional_libdir"
- fi
- fi
- haveit=
- for x in $LDFLAGS $LTLIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LTLIBNAME.
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+
}-L$additional_libdir"
- fi
- fi
- fi
- fi
- ;;
- -R*)
- dir=`echo "X$dep" | sed -e 's/^X-R//'`
- if test "$enable_rpath" != no; then
- dnl Potentially add DIR to rpathdirs.
- dnl The rpathdirs will be appended to $LIBNAME at the
end.
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $dir"
- fi
- dnl Potentially add DIR to ltrpathdirs.
- dnl The ltrpathdirs will be appended to $LTLIBNAME at
the end.
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $dir"
- fi
- fi
- ;;
- -l*)
- dnl Handle this in the next round.
- names_next_round="$names_next_round "`echo "X$dep" | sed
-e 's/^X-l//'`
- ;;
- *.la)
- dnl Handle this in the next round. Throw away the .la's
- dnl directory; it is already contained in a preceding -L
- dnl option.
- names_next_round="$names_next_round "`echo "X$dep" | sed
-e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
- ;;
- *)
- dnl Most likely an immediate library name.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
- ;;
- esac
- done
- fi
- else
- dnl Didn't find the library; assume it is in the system directories
- dnl known to the linker and runtime loader. (All the system
- dnl directories known to the linker should also be known to the
- dnl runtime loader, otherwise the system is severely
misconfigured.)
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
- fi
- fi
- fi
- done
- done
- if test "X$rpathdirs" != "X"; then
- if test -n "$acl_hardcode_libdir_separator"; then
- dnl Weird platform: only the last -rpath option counts, the user must
- dnl pass all path elements in one option. We can arrange that for a
- dnl single library, but not when more than one $LIBNAMEs are used.
- alldirs=
- for found_dir in $rpathdirs; do
-
alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
- done
- dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
- else
- dnl The -rpath options are cumulative.
- for found_dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$found_dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
- done
- fi
- fi
- if test "X$ltrpathdirs" != "X"; then
- dnl When using libtool, the option that works for both libraries and
- dnl executables is -R. The -R options are cumulative.
- for found_dir in $ltrpathdirs; do
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
- done
- fi
-])
-
-dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
-dnl unless already present in VAR.
-dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
-dnl contains two or three consecutive elements that belong together.
-AC_DEFUN([AC_LIB_APPENDTOVAR],
-[
- for element in [$2]; do
- haveit=
- for x in $[$1]; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X$element"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- [$1]="${[$1]}${[$1]:+ }$element"
- fi
- done
-])
-
-dnl For those cases where a variable contains several -L and -l options
-dnl referring to unknown libraries and directories, this macro determines the
-dnl necessary additional linker options for the runtime path.
-dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
-dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
-dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
-dnl otherwise linking without libtool is assumed.
-AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
-[
- AC_REQUIRE([AC_LIB_RPATH])
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- $1=
- if test "$enable_rpath" != no; then
- if test -n "$acl_hardcode_libdir_flag_spec" && test
"$acl_hardcode_minus_L" = no; then
- dnl Use an explicit option to hardcode directories into the resulting
- dnl binary.
- rpathdirs=
- next=
- for opt in $2; do
- if test -n "$next"; then
- dir="$next"
- dnl No need to hardcode the standard /usr/lib.
- if test "X$dir" != "X/usr/$acl_libdirstem"; then
- rpathdirs="$rpathdirs $dir"
- fi
- next=
- else
- case $opt in
- -L) next=yes ;;
- -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
- dnl No need to hardcode the standard /usr/lib.
- if test "X$dir" != "X/usr/$acl_libdirstem"; then
- rpathdirs="$rpathdirs $dir"
- fi
- next= ;;
- *) next= ;;
- esac
- fi
- done
- if test "X$rpathdirs" != "X"; then
- if test -n ""$3""; then
- dnl libtool is used for linking. Use -R options.
- for dir in $rpathdirs; do
- $1="${$1}${$1:+ }-R$dir"
- done
- else
- dnl The linker is used for linking directly.
- if test -n "$acl_hardcode_libdir_separator"; then
- dnl Weird platform: only the last -rpath option counts, the user
- dnl must pass all path elements in one option.
- alldirs=
- for dir in $rpathdirs; do
-
alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
- done
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- $1="$flag"
- else
- dnl The -rpath options are cumulative.
- for dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- $1="${$1}${$1:+ }$flag"
- done
- fi
- fi
- fi
- fi
- fi
- AC_SUBST([$1])
-])
diff --git a/myserver/m4/lib-prefix.m4 b/myserver/m4/lib-prefix.m4
deleted file mode 100644
index a8684e1..0000000
--- a/myserver/m4/lib-prefix.m4
+++ /dev/null
@@ -1,185 +0,0 @@
-# lib-prefix.m4 serial 5 (gettext-0.15)
-dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
-dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
-dnl require excessive bracketing.
-ifdef([AC_HELP_STRING],
-[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
-[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
-
-dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
-dnl to access previously installed libraries. The basic assumption is that
-dnl a user will want packages to use other packages he previously installed
-dnl with the same --prefix option.
-dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
-dnl libraries, but is otherwise very convenient.
-AC_DEFUN([AC_LIB_PREFIX],
-[
- AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
- AC_REQUIRE([AC_PROG_CC])
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- dnl By default, look in $includedir and $libdir.
- use_additional=yes
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- AC_LIB_ARG_WITH([lib-prefix],
-[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
- --without-lib-prefix don't search for libraries in includedir and libdir],
-[
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- fi
- fi
-])
- if test $use_additional = yes; then
- dnl Potentially add $additional_includedir to $CPPFLAGS.
- dnl But don't add it
- dnl 1. if it's the standard /usr/include,
- dnl 2. if it's already present in $CPPFLAGS,
- dnl 3. if it's /usr/local/include and we are using GCC on Linux,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- for x in $CPPFLAGS; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- dnl Really add $additional_includedir to $CPPFLAGS.
- CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- dnl Potentially add $additional_libdir to $LDFLAGS.
- dnl But don't add it
- dnl 1. if it's the standard /usr/lib,
- dnl 2. if it's already present in $LDFLAGS,
- dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
- haveit=
- for x in $LDFLAGS; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
- if test -n "$GCC"; then
- case $host_os in
- linux*) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LDFLAGS.
- LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- fi
-])
-
-dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
-dnl acl_final_exec_prefix, containing the values to which $prefix and
-dnl $exec_prefix will expand at the end of the configure script.
-AC_DEFUN([AC_LIB_PREPARE_PREFIX],
-[
- dnl Unfortunately, prefix and exec_prefix get only finally determined
- dnl at the end of configure.
- if test "X$prefix" = "XNONE"; then
- acl_final_prefix="$ac_default_prefix"
- else
- acl_final_prefix="$prefix"
- fi
- if test "X$exec_prefix" = "XNONE"; then
- acl_final_exec_prefix='${prefix}'
- else
- acl_final_exec_prefix="$exec_prefix"
- fi
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
- prefix="$acl_save_prefix"
-])
-
-dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
-dnl variables prefix and exec_prefix bound to the values they will have
-dnl at the end of the configure script.
-AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
-[
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- $1
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-])
-
-dnl AC_LIB_PREPARE_MULTILIB creates a variable acl_libdirstem, containing
-dnl the basename of the libdir, either "lib" or "lib64".
-AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
-[
- dnl There is no formal standard regarding lib and lib64. The current
- dnl practice is that on a system supporting 32-bit and 64-bit instruction
- dnl sets or ABIs, 64-bit libraries go under $prefix/lib64 and 32-bit
- dnl libraries go under $prefix/lib. We determine the compiler's default
- dnl mode by looking at the compiler's library search path. If at least
- dnl of its elements ends in /lib64 or points to a directory whose absolute
- dnl pathname ends in /lib64, we assume a 64-bit ABI. Otherwise we use the
- dnl default, namely "lib".
- acl_libdirstem=lib
- searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e
's,^libraries: ,,p' | sed -e 's,^=,,'`
- if test -n "$searchpath"; then
- acl_save_IFS="${IFS= }"; IFS=":"
- for searchdir in $searchpath; do
- if test -d "$searchdir"; then
- case "$searchdir" in
- */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
- *) searchdir=`cd "$searchdir" && pwd`
- case "$searchdir" in
- */lib64 ) acl_libdirstem=lib64 ;;
- esac ;;
- esac
- fi
- done
- IFS="$acl_save_IFS"
- fi
-])
diff --git a/myserver/m4/libtool.m4 b/myserver/m4/libtool.m4
index 469dc0f..1e7ea47 100644
--- a/myserver/m4/libtool.m4
+++ b/myserver/m4/libtool.m4
@@ -1,122 +1,185 @@
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-## Copyright 1996, 1997, 1998, 1999, 2000, 2001
-## Free Software Foundation, Inc.
-## Originally by Gordon Matzigkeit <address@hidden>, 1996
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful, but
-## WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02110-1301, USA.
-##
-## As a special exception to the GNU General Public License, if you
-## distribute this file as part of a program that contains a
-## configuration script generated by Autoconf, you may include it under
-## the same distribution terms that you use for the rest of that program.
-
-# serial 47 AC_PROG_LIBTOOL
-
-
-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-# -----------------------------------------------------------
-# If this macro is not defined by Autoconf, define it here.
-m4_ifdef([AC_PROVIDE_IFELSE],
- [],
- [m4_define([AC_PROVIDE_IFELSE],
- [m4_ifdef([AC_PROVIDE_$1],
- [$2], [$3])])])
-
-
-# AC_PROG_LIBTOOL
-# ---------------
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
- AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [AC_LIBTOOL_CXX],
- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
- ])])
-dnl And a similar setup for Fortran 77 support
- AC_PROVIDE_IFELSE([AC_PROG_F77],
- [AC_LIBTOOL_F77],
- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [ifdef([AC_PROG_GCJ],
- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
- ifdef([A][M_PROG_GCJ],
- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
- ifdef([LT_AC_PROG_GCJ],
- [define([LT_AC_PROG_GCJ],
- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-])])# AC_PROG_LIBTOOL
-
-
-# _AC_PROG_LIBTOOL
-# ----------------
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
+
+# serial 56 LT_INIT
+
+
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+ [m4_default([$3],
+ [m4_fatal([Libtool version $1 or higher is required],
+ 63)])],
+ [$2])])
+
+
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+ *\ * | *\ *)
+ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+LIBTOOL_DEPS="$ltmain"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])# _AC_PROG_LIBTOOL
+_LT_SETUP
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
-# AC_LIBTOOL_SETUP
-# ----------------
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.50)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
-AC_LIBTOOL_SYS_MAX_CMD_LEN
-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-AC_LIBTOOL_OBJDIR
+_LT_CHECK_OBJDIR
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-_LT_AC_PROG_ECHO_BACKSLASH
+m4_require([_LT_TAG_COMPILER])dnl
+_LT_PROG_ECHO_BACKSLASH
case $host_os in
aix3*)
@@ -132,174 +195,885 @@ esac
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
# Same as above, but do not quote variable references.
-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
# Sed substitution to avoid accidental globbing in evaled expressions
no_glob_subst='s/\*/\\\*/g'
-# Constants:
-rm="rm -f"
-
# Global variables:
-default_ofile=libtool
+ofile=libtool
can_build_shared=yes
-# All known linkers require a `.a' archive for static linking (except M$VC,
+# All known linkers require a `.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-AC_CHECK_TOOL(AR, ar, false)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
+with_gnu_ld="$lt_cv_prog_gnu_ld"
old_CC="$CC"
old_CFLAGS="$CFLAGS"
# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
test -z "$CC" && CC=cc
test -z "$LTCC" && LTCC=$CC
-test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
test -z "$ac_objext" && ac_objext=o
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
- case $host_os in
- openbsd*)
- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
- ;;
- *)
- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
- ;;
- esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
+_LT_CC_BASENAME([$compiler])
# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
case $deplibs_check_method in
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- AC_PATH_MAGIC
+ _LT_PATH_MAGIC
fi
;;
esac
-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
-AC_ARG_ENABLE([libtool-lock],
- [AC_HELP_STRING([--disable-libtool-lock],
- [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-AC_ARG_WITH([pic],
- [AC_HELP_STRING([--with-pic],
- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
- [pic_mode="$withval"],
- [pic_mode=default])
-test -z "$pic_mode" && pic_mode=default
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
-# Use C for the default configuration in the libtool script
-tagname=
-AC_LIBTOOL_LANG_C_CONFIG
-_LT_AC_TAGCONFIG
-])# AC_LIBTOOL_SETUP
+## ------------------------------------- ##
+## Accumulate code for creating libtool. ##
+## ------------------------------------- ##
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+## ------------------------ ##
+## FIXME: Eliminate VARNAME ##
+## ------------------------ ##
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME. Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+ [m4_ifval([$1], [$1], [$2])])
+ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+ m4_ifval([$4],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+ lt_dict_add_subkey([lt_decl_dict], [$2],
+ [tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+ [0], [m4_fatal([$0: too few arguments: $#])],
+ [1], [m4_fatal([$0: too few arguments: $#: $1])],
+ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+ [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_if([$2], [],
+ m4_quote(lt_decl_varnames),
+ m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'. VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly. In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
-# _LT_AC_SYS_COMPILER
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this
script])dnl
+available_tags="_LT_TAGS"dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+# # Some comment about what VAR is for.
+# visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+ [description])))[]dnl
+m4_pushdef([_libtool_name],
+ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+ [0], [_libtool_name=[$]$1],
+ [1], [_libtool_name=$lt_[]$1],
+ [2], [_libtool_name=$lt_[]$1],
+ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
# -------------------
-AC_DEFUN([_LT_AC_SYS_COMPILER],
+# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'. Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+ dnl If the libtool generation code has been placed in $CONFIG_LT,
+ dnl instead of duplicating it all over again into config.status,
+ dnl then we will have config.status run $CONFIG_LT later, so it
+ dnl needs to know what name is stored there:
+ [AC_CONFIG_COMMANDS([libtool],
+ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+ dnl If the libtool generation code is destined for config.status,
+ dnl expand the accumulated commands and init code now:
+ [AC_CONFIG_COMMANDS([libtool],
+ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e
\\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e
\\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e
\\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\[$]0 --fallback-echo"')dnl "
+ lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0
--fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+ ;;
+esac
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+cat >"$CONFIG_LT" <<_LTEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate a libtool stub with the current configuration.
+
+lt_cl_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AS_SHELL_SANITIZE
+_AS_PREPARE
+
+exec AS_MESSAGE_FD>&1
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+ echo
+ AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+
+Report bugs to <address@hidden>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2008 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test $[#] != 0
+do
+ case $[1] in
+ --version | --v* | -V )
+ echo "$lt_cl_version"; exit 0 ;;
+ --help | --h* | -h )
+ echo "$lt_cl_help"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --quiet | --q* | --silent | --s* | -q )
+ lt_cl_silent=: ;;
+
+ -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+ *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+ esac
+ shift
+done
+
+if $lt_cl_silent; then
+ exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure. Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+if test "$no_create" != yes; then
+ lt_cl_success=:
+ test "$silent" = yes &&
+ lt_config_lt_args="$lt_config_lt_args --quiet"
+ exec AS_MESSAGE_LOG_FD>/dev/null
+ $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+ exec AS_MESSAGE_LOG_FD>>config.log
+ $lt_cl_success || AS_EXIT(1)
+fi
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars. Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+ m4_if(_LT_TAG, [C], [
+ # See if we are running on zsh, and set the options which allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile="${ofile}T"
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building
support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+ _LT_PROG_LTMAIN
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ _LT_PROG_XSI_SHELLFNS
+
+ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >>
"$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ TIMESTAMP='$TIMESTAMP'
+ RM='$RM'
+ ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+# autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+ [C], [_LT_LANG(C)],
+ [C++], [_LT_LANG(CXX)],
+ [Java], [_LT_LANG(GCJ)],
+ [Fortran 77], [_LT_LANG(F77)],
+ [Fortran], [_LT_LANG(FC)],
+ [Windows Resource], [_LT_LANG(RC)],
+ [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+ [_LT_LANG($1)],
+ [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+ [LT_SUPPORTED_TAG([$1])dnl
+ m4_append([_LT_TAGS], [$1 ])dnl
+ m4_define([_LT_LANG_]$1[_enabled], [])dnl
+ _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [LT_LANG(CXX)],
+ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+ [LT_LANG(F77)],
+ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+ [LT_LANG(FC)],
+ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [m4_ifdef([AC_PROG_GCJ],
+ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([A][M_PROG_GCJ],
+ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([LT_PROG_GCJ],
+ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+ [LT_LANG(RC)],
+ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
[AC_REQUIRE([AC_PROG_CC])dnl
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
# Allow CC to be a program name with arguments.
compiler=$CC
-])# _LT_AC_SYS_COMPILER
+])# _LT_TAG_COMPILER
-# _LT_AC_SYS_LIBPATH_AIX
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+ case $host_os in
+ rhapsody* | darwin*)
+ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+ AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+ AC_CHECK_TOOL([LIPO], [lipo], [:])
+ AC_CHECK_TOOL([OTOOL], [otool], [:])
+ AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+ _LT_DECL([], [DSYMUTIL], [1],
+ [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+ _LT_DECL([], [NMEDIT], [1],
+ [Tool to change global to local symbols on Mac OS X])
+ _LT_DECL([], [LIPO], [1],
+ [Tool to manipulate fat objects and archives on Mac OS X])
+ _LT_DECL([], [OTOOL], [1],
+ [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+ _LT_DECL([], [OTOOL64], [1],
+ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+ AC_CACHE_CHECK([for -single_module linker
flag],[lt_cv_apple_cc_single_mod],
+ [lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ if test -f libconftest.dylib && test ! -s conftest.err && test
$_lt_result = 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi])
+ AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+ [lt_cv_ld_exported_symbols_list],
+ [lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [lt_cv_ld_exported_symbols_list=yes],
+ [lt_cv_ld_exported_symbols_list=no])
+ LDFLAGS="$save_LDFLAGS"
+ ])
+ case $host_os in
+ rhapsody* | darwin1.[[012]])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined
${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined
${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms='
${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s
$output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+])
+
+
+# _LT_DARWIN_LINKER_FEATURES
+# --------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+ m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=echo
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o
\$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname
\$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle
\$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols >
\$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib
\$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags
-install_name \$rpath/\$soname \$verstring
${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols >
\$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib
-bundle \$libobjs \$deplibs
\$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ m4_if([$1], [CXX],
+[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o
\${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib
\${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname
\$verstring${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols >
\$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs
-nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag
-o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name
\$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+ fi
+],[])
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX
+# -----------------------
# Links a minimal program and checks the executable
# for the system default hardcoded library path. In most cases,
# this is /usr/lib:/lib, but when the MPI compilers are used
# the location of the communication and MPI libs are included too.
# If we don't find anything, use the default library path according
# to the aix ld manual.
-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File
Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e
"$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext
2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0
*\(.*\)$/\1/; p; }
-}'`; fi],[])
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e
"$lt_aix_libpath_sed"`
+fi],[])
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_AC_SYS_LIBPATH_AIX
+])# _LT_SYS_MODULE_PATH_AIX
-# _LT_AC_SHELL_INIT(ARG)
-# ----------------------
-AC_DEFUN([_LT_AC_SHELL_INIT],
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
[ifdef([AC_DIVERSION_NOTICE],
[AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
[AC_DIVERT_PUSH(NOTICE)])
$1
AC_DIVERT_POP
-])# _LT_AC_SHELL_INIT
+])# _LT_SHELL_INIT
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
# Add some code to the start of the generated configure script which
# will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[_LT_AC_SHELL_INIT([
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[_LT_SHELL_INIT([
# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}
-case X$ECHO in
+case X$lt_ECHO in
X*--fallback-echo)
# Remove one level of quotation (which was required for Make).
- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
;;
esac
-echo=${ECHO-echo}
+ECHO=${lt_ECHO-echo}
if test "X[$]1" = X--no-reexec; then
# Discard the --no-reexec flag, and continue.
shift
elif test "X[$]1" = X--fallback-echo; then
# Avoid inline document here, it may be left over
:
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
- # Yippee, $echo works!
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+ # Yippee, $ECHO works!
:
else
# Restart under the correct shell.
@@ -309,134 +1083,137 @@ fi
if test "X[$]1" = X--fallback-echo; then
# used as fallback echo
shift
- cat <<EOF
+ cat <<_LT_EOF
[$]*
-EOF
+_LT_EOF
exit 0
fi
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q
"[$]0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
- echo_test_string="`eval $cmd`" &&
- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
- then
- break
- fi
- done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
-else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test -z "$lt_ECHO"; then
+ if test "X${echo_test_string+set}" != Xset; then
+ # find a string as large as possible, as long as the shell can cope with it
+ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q
"[$]0"' 'echo test'; do
+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+ if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+ then
+ break
+ fi
+ done
+ fi
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ :
+ else
+ # The Solaris, AIX, and Digital Unix default echo programs unquote
+ # backslashes. This makes it impossible to quote backslashes using
+ # echo "$something" | sed 's/\\/\\\\/g'
+ #
+ # So, first we look for a working echo in the user's PATH.
+
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for dir in $PATH /usr/ucb; do
+ IFS="$lt_save_ifs"
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$dir/echo"
+ break
+ fi
+ done
IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
- if test "X$echo" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- echo='print -r'
- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
- else
- # Try using printf.
- echo='printf %s\n'
- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo
'\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo
"$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- echo="$CONFIG_SHELL [$]0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t')
2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo
"$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$CONFIG_SHELL [$]0 --fallback-echo"
+ if test "X$ECHO" = Xecho; then
+ # We didn't find a better echo, so look for alternatives.
+ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # This shell has a builtin print -r that does the trick.
+ ECHO='print -r'
+ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+ test "X$CONFIG_SHELL" != X/bin/ksh; then
+ # If we have ksh, try running configure again with it.
+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+ export ORIGINAL_CONFIG_SHELL
+ CONFIG_SHELL=/bin/ksh
+ export CONFIG_SHELL
+ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
else
- # maybe with a smaller string...
- prev=:
+ # Try using printf.
+ ECHO='printf %s\n'
+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # Cool, printf works
+ :
+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0"
--fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0"
--fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+ export CONFIG_SHELL
+ SHELL="$CONFIG_SHELL"
+ export SHELL
+ ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t')
2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo
"$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+ else
+ # maybe with a smaller string...
+ prev=:
- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q
"[$]0"' 'sed 50q "[$]0"'; do
- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
+ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q
"[$]0"' 'sed 50q "[$]0"'; do
+ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+ then
+ break
+ fi
+ prev="$cmd"
+ done
- if test "$prev" != 'sed 50q "[$]0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0"
${1+"[$]@"}
- else
- # Oops. We lost completely, so just stick with echo.
- echo=echo
- fi
+ if test "$prev" != 'sed 50q "[$]0"'; then
+ echo_test_string=`eval $prev`
+ export echo_test_string
+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0"
${1+"[$]@"}
+ else
+ # Oops. We lost completely, so just stick with echo.
+ ECHO=echo
+ fi
+ fi
fi
fi
fi
fi
-fi
# Copy echo and quote the copy suitably for passing to libtool from
# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+ lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
fi
-AC_SUBST(ECHO)
-])])# _LT_AC_PROG_ECHO_BACKSLASH
+AC_SUBST(lt_ECHO)
+])
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1],
+ [An echo program that does not interpret backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
-# _LT_AC_LOCK
-# -----------
-AC_DEFUN([_LT_AC_LOCK],
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
[AC_ARG_ENABLE([libtool-lock],
- [AC_HELP_STRING([--disable-libtool-lock],
- [avoid locking (might break parallel builds)])])
+ [AS_HELP_STRING([--disable-libtool-lock],
+ [avoid locking (might break parallel builds)])])
test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
@@ -447,12 +1224,12 @@ ia64-*-hpux*)
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.$ac_objext` in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
esac
fi
rm -rf conftest*
@@ -461,72 +1238,79 @@ ia64-*-hpux*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
- esac
- else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
fi
rm -rf conftest*
;;
-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
- case "`/usr/bin/file conftest.o`" in
- *32-bit*)
- case $host in
- x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
- ;;
- ppc64-*linux*|powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- ppc*-*linux*|powerpc*-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
esac
fi
rm -rf conftest*
@@ -538,37 +1322,90 @@
x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_LANG_PUSH(C)
- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+
AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
AC_LANG_POP])
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
fi
;;
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
+sparc*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
;;
- ])
esac
need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
-])# _LT_AC_LOCK
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[AC_CHECK_TOOL(AR, ar, false)
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1])
-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+ [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+ [Commands used to build an old-style archive])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
# ----------------------------------------------------------------
# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
[$2=no
- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="$3"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
@@ -576,7 +1413,7 @@ AC_CACHE_CHECK([$1], [$2],
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
@@ -586,58 +1423,78 @@ AC_CACHE_CHECK([$1], [$2],
echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test ! -s conftest.err; then
+ # So say no if there are warnings other than the usual output.
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null;
then
$2=yes
fi
fi
- $rm conftest*
+ $RM conftest*
])
if test x"[$]$2" = xyes; then
- ifelse([$5], , :, [$5])
+ m4_if([$5], , :, [$5])
else
- ifelse([$6], , :, [$6])
+ m4_if([$6], , :, [$6])
fi
-])# AC_LIBTOOL_COMPILER_OPTION
+])# _LT_COMPILER_OPTION
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [ACTION-SUCCESS], [ACTION-FAILURE])
-# ------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_CACHE_CHECK([$1], [$2],
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
[$2=no
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $3"
- printf "$lt_simple_link_test_code" > conftest.$ac_ext
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The compiler can only warn and ignore the option if not recognized
+ # The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&AS_MESSAGE_LOG_FD
+ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
else
$2=yes
fi
fi
- $rm conftest*
+ $RM -r conftest*
LDFLAGS="$save_LDFLAGS"
])
if test x"[$]$2" = xyes; then
- ifelse([$4], , :, [$4])
+ m4_if([$4], , :, [$4])
else
- ifelse([$5], , :, [$5])
+ m4_if([$5], , :, [$5])
fi
-])# AC_LIBTOOL_LINKER_OPTION
+])# _LT_LINKER_OPTION
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
-# AC_LIBTOOL_SYS_MAX_CMD_LEN
-# --------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-[# find the maximum length of command line arguments
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
i=0
@@ -659,7 +1516,7 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
lt_cv_sys_max_cmd_len=-1;
;;
- cygwin* | mingw*)
+ cygwin* | mingw* | cegcc*)
# On Win9x/ME, this test blows up -- it succeeds, but takes
# about 5 minutes as the teststring grows exponentially.
# Worse, since 9x/ME are not pre-emptively multitasking,
@@ -676,24 +1533,79 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
lt_cv_sys_max_cmd_len=8192;
;;
- *)
- # If test is not a shell built-in, we'll probably end up computing a
- # maximum length that is only half of the actual maximum length, but
- # we can't tell.
- while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring"
2>/dev/null` \
- = "XX$teststring") >/dev/null 2>&1 &&
- new_result=`expr "X$teststring" : ".*" 2>&1` &&
- lt_cv_sys_max_cmd_len=$new_result &&
- test $i != 17 # 1/2 MB should be enough
- do
- i=`expr $i + 1`
- teststring=$teststring$teststring
- done
- teststring=
- # Add a significant safety factor because C++ compilers can tack on massive
- # amounts of additional arguments before passing them to the linker.
- # It appears as though 1/2 is a usable value.
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring"
2>/dev/null` \
+ = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
;;
esac
])
@@ -702,27 +1614,35 @@ if test -n $lt_cv_sys_max_cmd_len ; then
else
AC_MSG_RESULT(none)
fi
-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+ [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
-# _LT_AC_CHECK_DLFCN
-# --------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)dnl
-])# _LT_AC_CHECK_DLFCN
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
if test "$cross_compiling" = yes; then :
[$4]
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
+ cat > conftest.$ac_ext <<_LT_EOF
[#line __oline__ "configure"
#include "confdefs.h"
@@ -764,10 +1684,6 @@ else
# endif
#endif
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
void fnord() { int i=42;}
int main ()
{
@@ -780,17 +1696,19 @@ int main ()
else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
/* dlclose (self); */
}
+ else
+ puts (dlerror ());
- exit (status);
+ return status;
}]
-EOF
+_LT_EOF
if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) 2>/dev/null
+ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) $1 ;;
x$lt_dlneed_uscore) $2 ;;
- x$lt_unknown|x*) $3 ;;
+ x$lt_dlunknown|x*) $3 ;;
esac
else :
# compilation failed
@@ -798,13 +1716,13 @@ EOF
fi
fi
rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
+])# _LT_TRY_DLOPEN_SELF
-# AC_LIBTOOL_DLOPEN_SELF
-# -------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
if test "x$enable_dlopen" != xyes; then
enable_dlopen=unknown
enable_dlopen_self=unknown
@@ -820,15 +1738,15 @@ else
lt_cv_dlopen_self=yes
;;
- mingw* | pw32*)
+ mingw* | pw32* | cegcc*)
lt_cv_dlopen="LoadLibrary"
lt_cv_dlopen_libs=
- ;;
+ ;;
cygwin*)
lt_cv_dlopen="dlopen"
lt_cv_dlopen_libs=
- ;;
+ ;;
darwin*)
# if libdl is installed we need to link against it
@@ -838,13 +1756,13 @@ else
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
])
- ;;
+ ;;
*)
AC_CHECK_FUNC([shl_load],
[lt_cv_dlopen="shl_load"],
[AC_CHECK_LIB([dld], [shl_load],
- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
+ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
[AC_CHECK_FUNC([dlopen],
[lt_cv_dlopen="dlopen"],
[AC_CHECK_LIB([dl], [dlopen],
@@ -852,7 +1770,7 @@ else
[AC_CHECK_LIB([svld], [dlopen],
[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
[AC_CHECK_LIB([dld], [dld_link],
- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
])
])
])
@@ -873,23 +1791,23 @@ else
test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
save_LDFLAGS="$LDFLAGS"
- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS
$export_dynamic_flag_spec\"
save_LIBS="$LIBS"
LIBS="$lt_cv_dlopen_libs $LIBS"
AC_CACHE_CHECK([whether a program can dlopen itself],
lt_cv_dlopen_self, [dnl
- _LT_AC_TRY_DLOPEN_SELF(
+ _LT_TRY_DLOPEN_SELF(
lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
])
if test "x$lt_cv_dlopen_self" = xyes; then
- LDFLAGS="$LDFLAGS $link_static_flag"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS
$lt_prog_compiler_static\"
AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
- lt_cv_dlopen_self_static, [dnl
- _LT_AC_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self_static, [dnl
+ _LT_TRY_DLOPEN_SELF(
lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
])
@@ -911,22 +1829,36 @@ else
*) enable_dlopen_self_static=unknown ;;
esac
fi
-])# AC_LIBTOOL_DLOPEN_SELF
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+ [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+ [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+ [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-# ---------------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler
-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
- $rm -r conftest 2>/dev/null
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+ $RM -r conftest 2>/dev/null
mkdir conftest
cd conftest
mkdir out
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
@@ -934,7 +1866,7 @@ AC_CACHE_CHECK([if $compiler supports -c -o
file.$ac_objext],
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
@@ -946,35 +1878,41 @@ AC_CACHE_CHECK([if $compiler supports -c -o
file.$ac_objext],
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- if test ! -s out/conftest.err; then
- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2
>/dev/null; then
+ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
fi
fi
- chmod u+w .
- $rm conftest*
+ chmod u+w . 2>&AS_MESSAGE_LOG_FD
+ $RM conftest*
# SGI C++ compiler will create directory out/ii_files/ for
# template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
cd ..
- rmdir conftest
- $rm conftest*
+ $RM -r conftest
+ $RM conftest*
])
-])# AC_LIBTOOL_PROG_CC_C_O
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+ [Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-# -----------------------------------------
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
# Check to see if we can do hard links to lock some files if needed
-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-[AC_REQUIRE([_LT_AC_LOCK])dnl
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
hard_links="nottested"
-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test
"$need_locks" != no; then
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks"
!= no; then
# do not overwrite the value of need_locks provided by the user
AC_MSG_CHECKING([if we can lock with hard links])
hard_links=yes
- $rm conftest*
+ $RM conftest*
ln conftest.a conftest.b 2>/dev/null && hard_links=no
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
@@ -987,12 +1925,13 @@ if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" =
no && test "$need_locks"
else
need_locks=no
fi
-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
-# AC_LIBTOOL_OBJDIR
-# -----------------
-AC_DEFUN([AC_LIBTOOL_OBJDIR],
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
[rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
@@ -1004,40 +1943,46 @@ else
fi
rmdir .libs 2>/dev/null])
objdir=$lt_cv_objdir
-])# AC_LIBTOOL_OBJDIR
+_LT_DECL([], [objdir], [0],
+ [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+ [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-# ----------------------------------------------
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
# Check hardcoding attributes.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_AC_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
- test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+ test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
- # We can hardcode non-existant directories.
- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
+ # We can hardcode non-existent directories.
+ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
# Linking always hardcodes the temporary library directory.
- _LT_AC_TAGVAR(hardcode_action, $1)=relink
+ _LT_TAGVAR(hardcode_action, $1)=relink
else
# We can link without hardcoding, and we can hardcode nonexisting dirs.
- _LT_AC_TAGVAR(hardcode_action, $1)=immediate
+ _LT_TAGVAR(hardcode_action, $1)=immediate
fi
else
# We cannot hardcode anything, or else we can only hardcode existing
# directories.
- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
+ _LT_TAGVAR(hardcode_action, $1)=unsupported
fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
# Fast installation is not supported
enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
@@ -1045,43 +1990,107 @@ elif test "$shlibpath_overrides_runpath" = yes ||
# Fast installation is not necessary
enable_fast_install=needless
fi
-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
+_LT_TAGDECL([], [hardcode_action], [0],
+ [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
-# AC_LIBTOOL_SYS_LIB_STRIP
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-[striplib=
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
old_striplib=
AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
test -z "$striplib" && striplib="$STRIP --strip-unneeded"
AC_MSG_RESULT([yes])
else
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
- darwin*)
- if test -n "$STRIP" ; then
- striplib="$STRIP -x"
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
-fi
- ;;
- *)
- AC_MSG_RESULT([no])
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ fi
+ ;;
+ *)
+ AC_MSG_RESULT([no])
;;
esac
fi
-])# AC_LIBTOOL_SYS_LIB_STRIP
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+# _LT_SYS_DYNAMIC_LINKER([TAG])
# -----------------------------
# PORTME Fill in your ld.so characteristics
-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_MSG_CHECKING([dynamic linker characteristics])
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+ [], [
+if test "$GCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e
"s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e
"s/$PATH_SEPARATOR/ /g"`
+ fi
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory
2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec
$lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
library_names_spec=
libname_spec='lib$name'
soname_spec=
@@ -1095,20 +2104,6 @@ shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
-if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED
-e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/
/g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e
"s/$PATH_SEPARATOR/ /g"`
- fi
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
need_lib_prefix=unknown
hardcode_into_libs=no
@@ -1126,7 +2121,7 @@ aix3*)
soname_spec='${libname}${release}${shared_ext}$major'
;;
-aix4* | aix5*)
+aix[[4-9]]*)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -1145,7 +2140,7 @@ aix4* | aix5*)
aix4 | aix4.[[01]] | aix4.[[01]].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
@@ -1171,9 +2166,18 @@ aix4* | aix5*)
;;
amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do
libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`;
test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib
${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a ||
exit 1; done'
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the
compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do
libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`;
test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib
${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a ||
exit 1; done'
+ ;;
+ esac
;;
beos*)
@@ -1182,7 +2186,7 @@ beos*)
shlibpath_var=LIBRARY_PATH
;;
-bsdi4*)
+bsdi[[45]]*)
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -1196,24 +2200,28 @@ bsdi4*)
# libtool to hard-code these into programs
;;
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
shrext_cmds=".dll"
need_version=no
need_lib_prefix=no
case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
+ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo
\$dlname'\''`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo
\$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname'
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
- $rm \$dlpath'
+ $RM \$dlpath'
shlibpath_overrides_runpath=yes
case $host_os in
@@ -1222,25 +2230,25 @@ cygwin* | mingw* | pw32*)
soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} |
$SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
;;
- mingw*)
+ mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='${libname}`echo ${release} | $SED -e
's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" |
$SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null];
then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" |
$SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null];
then
# It is most probably a Windows format PATH printed by
# mingw gcc, but we are running on Cygwin. Gcc prints its search
# path with ; separators, and with drive letters. We can handle the
# drive letters (cygwin fileutils understands them), so leave them,
# especially as we might pass files found there to a mingw objdump,
# which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e
's/;/ /g'`
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e
's/;/ /g'`
else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e
"s/$PATH_SEPARATOR/ /g"`
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e
"s/$PATH_SEPARATOR/ /g"`
fi
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo
${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo
${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
;;
esac
;;
@@ -1259,17 +2267,13 @@ darwin* | rhapsody*)
version_type=darwin
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext
${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ library_names_spec='${libname}${release}${major}$shared_ext
${libname}$shared_ext'
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
- if test "$GCC" = yes; then
- sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n"
"$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep
"^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR,
,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
- else
- sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
- fi
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
@@ -1286,20 +2290,17 @@ freebsd1*)
dynamic_linker=no
;;
-kfreebsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='GNU ld.so'
- ;;
-
-freebsd*)
- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[[123]]*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
@@ -1317,14 +2318,19 @@ freebsd*)
freebsd2*)
shlibpath_overrides_runpath=yes
;;
- freebsd3.[01]* | freebsdelf3.[01]*)
+ freebsd3.[[01]]* | freebsdelf3.[[01]]*)
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
- *) # from 3.2 on
+ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
esac
;;
@@ -1344,7 +2350,7 @@ hpux9* | hpux10* | hpux11*)
version_type=sunos
need_lib_prefix=no
need_version=no
- case "$host_cpu" in
+ case $host_cpu in
ia64*)
shrext_cmds='.so'
hardcode_into_libs=yes
@@ -1360,18 +2366,18 @@ hpux9* | hpux10* | hpux11*)
fi
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
shrext_cmds='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
@@ -1384,6 +2390,18 @@ hpux9* | hpux10* | hpux11*)
postinstall_cmds='chmod 555 $lib'
;;
+interix[[3-9]]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
irix5* | irix6* | nonstopux*)
case $host_os in
nonstopux*) version_type=nonstopux ;;
@@ -1427,7 +2445,7 @@ linux*oldld* | linux*aout* | linux*coff*)
;;
# This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -1436,6 +2454,17 @@ linux*)
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
+ # Some binutils ld are patched to set DT_RUNPATH
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep
"RUNPATH.*$libdir" >/dev/null],
+ [shlibpath_overrides_runpath=yes])])
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
@@ -1443,7 +2472,7 @@ linux*)
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g'
/etc/ld.so.conf | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s
2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' <
/etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/
/g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -1456,7 +2485,7 @@ linux*)
dynamic_linker='GNU/Linux ld.so'
;;
-knetbsd*-gnu)
+netbsdelf*-gnu)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -1465,14 +2494,14 @@ knetbsd*-gnu)
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
- dynamic_linker='GNU ld.so'
+ dynamic_linker='NetBSD ld.elf_so'
;;
netbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
@@ -1493,24 +2522,31 @@ newsos6)
shlibpath_overrides_runpath=yes
;;
-nto-qnx*)
- version_type=linux
+*nto* | *qnx*)
+ version_type=qnx
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
;;
openbsd*)
version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
need_lib_prefix=no
- need_version=yes
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
case $host_os in
openbsd2.[[89]] | openbsd2.[[89]].*)
shlibpath_overrides_runpath=no
@@ -1544,11 +2580,8 @@ osf3* | osf4* | osf5*)
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
-sco3.2v5*)
- version_type=osf
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
+rdos*)
+ dynamic_linker=no
;;
solaris*)
@@ -1576,7 +2609,7 @@ sunos4*)
need_version=yes
;;
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+sysv4 | sysv4.3*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
@@ -1585,7 +2618,6 @@ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
sni)
shlibpath_overrides_runpath=no
need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
runpath_var=LD_RUN_PATH
;;
siemens)
@@ -1609,6 +2641,39 @@ sysv4*MP*)
fi
;;
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib
/usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
uts4*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -1622,271 +2687,59 @@ uts4*)
esac
AC_MSG_RESULT([$dynamic_linker])
test "$dynamic_linker" = no && can_build_shared=no
-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-
-
-# _LT_AC_TAGCONFIG
-# ----------------
-AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_ARG_WITH([tags],
- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
- [include additional configurations @<:@automatic@:>@])],
- [tagnames="$withval"])
-
-if test -f "$ltmain" && test -n "$tagnames"; then
- if test ! -f "${ofile}"; then
- AC_MSG_WARN([output file `$ofile' does not exist])
- fi
-
- if test -z "$LTCC"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
- if test -z "$LTCC"; then
- AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
- else
- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
- fi
- fi
- # Extract list of available tagged configurations in $ofile.
- # Note that this assumes the entire list is on one line.
- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e
's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for tagname in $tagnames; do
- IFS="$lt_save_ifs"
- # Check whether tagname contains only valid characters
- case `$echo "X$tagname" | $Xsed -e
's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'`
in
- "") ;;
- *) AC_MSG_ERROR([invalid tag name: $tagname])
- ;;
- esac
-
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" >
/dev/null
- then
- AC_MSG_ERROR([tag name \"$tagname\" already exists])
- fi
-
- # Update the list of available tags.
- if test -n "$tagname"; then
- echo appending configuration tag \"$tagname\" to $ofile
-
- case $tagname in
- CXX)
- if test -n "$CXX" && test "X$CXX" != "Xno"; then
- AC_LIBTOOL_LANG_CXX_CONFIG
- else
- tagname=""
- fi
- ;;
-
- F77)
- if test -n "$F77" && test "X$F77" != "Xno"; then
- AC_LIBTOOL_LANG_F77_CONFIG
- else
- tagname=""
- fi
- ;;
-
- GCJ)
- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
- AC_LIBTOOL_LANG_GCJ_CONFIG
- else
- tagname=""
- fi
- ;;
-
- RC)
- AC_LIBTOOL_LANG_RC_CONFIG
- ;;
-
- *)
- AC_MSG_ERROR([Unsupported tag name: $tagname])
- ;;
- esac
-
- # Append the new tag name to the list of available tags.
- if test -n "$tagname" ; then
- available_tags="$available_tags $tagname"
- fi
- fi
- done
- IFS="$lt_save_ifs"
-
- # Now substitute the updated list of available tags.
- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/'
\"$ofile\" > \"${ofile}T\""; then
- mv "${ofile}T" "$ofile"
- chmod +x "$ofile"
- else
- rm -f "${ofile}T"
- AC_MSG_ERROR([unable to update list of available tagged configurations.])
- fi
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX
COMPILER_PATH LIBRARY_PATH"
fi
-])# _LT_AC_TAGCONFIG
-
-
-# AC_LIBTOOL_DLOPEN
-# -----------------
-# enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN],
- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_DLOPEN
-
-
-# AC_LIBTOOL_WIN32_DLL
-# --------------------
-# declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_WIN32_DLL
-
-
-# AC_ENABLE_SHARED([DEFAULT])
-# ---------------------------
-# implement the --enable-shared flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([shared],
- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_shared=yes ;;
- no) enable_shared=no ;;
- *)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-])# AC_ENABLE_SHARED
-
-
-# AC_DISABLE_SHARED
-# -----------------
-#- set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)
-])# AC_DISABLE_SHARED
-
-
-# AC_ENABLE_STATIC([DEFAULT])
-# ---------------------------
-# implement the --enable-static flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([static],
- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_static=yes ;;
- no) enable_static=no ;;
- *)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-])# AC_ENABLE_STATIC
-
-
-# AC_DISABLE_STATIC
-# -----------------
-# set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)
-])# AC_DISABLE_STATIC
-
-
-# AC_ENABLE_FAST_INSTALL([DEFAULT])
-# ---------------------------------
-# implement the --enable-fast-install flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([fast-install],
- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
- [optimize for fast installation
@<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_fast_install=yes ;;
- no) enable_fast_install=no ;;
- *)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-])# AC_ENABLE_FAST_INSTALL
-
-
-# AC_DISABLE_FAST_INSTALL
-# -----------------------
-# set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)
-])# AC_DISABLE_FAST_INSTALL
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
-# AC_LIBTOOL_PICMODE([MODE])
+_LT_DECL([], [variables_saved_for_relink], [1],
+ [Variables whose values should be saved in libtool wrapper scripts and
+ restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+ [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+ [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+ [[List of archive names. First name is the real one, the rest are links.
+ The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+ [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [postinstall_cmds], [2],
+ [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+ [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+ [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+ [[As "finish_cmds", except a single script fragment to be evaled but
+ not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+ [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+ [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+ [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
# --------------------------
-# implement the --with-pic flag
-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)
-])# AC_LIBTOOL_PICMODE
-
-
-# AC_PROG_EGREP
-# -------------
-# This is predefined starting with Autoconf 2.54, so this conditional
-# definition can be removed once we require Autoconf 2.54 or later.
-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
- then ac_cv_prog_egrep='grep -E'
- else ac_cv_prog_egrep='egrep'
- fi])
- EGREP=$ac_cv_prog_egrep
- AC_SUBST([EGREP])
-])])
-
-
-# AC_PATH_TOOL_PREFIX
-# -------------------
-# find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
+# find a file program which can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
[case $MAGIC_CMD in
@@ -1899,7 +2752,7 @@ AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word. This closes a longstanding sh security hole.
- ac_dummy="ifelse([$2], , $PATH, [$2])"
+ ac_dummy="m4_if([$2], , $PATH, [$2])"
for ac_dir in $ac_dummy; do
IFS="$lt_save_ifs"
test -z "$ac_dir" && ac_dir=.
@@ -1908,13 +2761,13 @@ dnl not every word. This closes a longstanding sh
security hole.
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic
\(.*\)\"`"
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
else
- cat <<EOF 1>&2
+ cat <<_LT_EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
@@ -1925,7 +2778,7 @@ dnl not every word. This closes a longstanding sh
security hole.
*** may want to report the problem to your system manager and/or to
*** address@hidden
-EOF
+_LT_EOF
fi ;;
esac
fi
@@ -1942,37 +2795,47 @@ if test -n "$MAGIC_CMD"; then
else
AC_MSG_RESULT(no)
fi
-])# AC_PATH_TOOL_PREFIX
+_LT_DECL([], [MAGIC_CMD], [0],
+ [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
-# AC_PATH_MAGIC
-# -------------
-# find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+
+# _LT_PATH_MAGIC
+# --------------
+# find a file program which can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
else
MAGIC_CMD=:
fi
fi
-])# AC_PATH_MAGIC
+])# _LT_PATH_MAGIC
-# AC_PROG_LD
+# LT_PATH_LD
# ----------
# find the pathname to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
- [AC_HELP_STRING([--with-gnu-ld],
- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
- [test "$withval" = no || with_gnu_ld=yes],
- [with_gnu_ld=no])
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+
+AC_ARG_WITH([gnu-ld],
+ [AS_HELP_STRING([--with-gnu-ld],
+ [assume the C compiler uses GNU ld @<:@default=no@:>@])],
+ [test "$withval" = no || with_gnu_ld=yes],
+ [with_gnu_ld=no])dnl
+
ac_prog=ld
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
@@ -1989,9 +2852,9 @@ if test "$GCC" = yes; then
[[\\/]]* | ?:[[\\/]]*)
re_direlt='/[[^/]][[^/]]*/\.\./'
# Canonicalize the pathname of ld
- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
@@ -2018,7 +2881,7 @@ AC_CACHE_VAL(lt_cv_path_LD,
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
+ # but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
@@ -2041,16 +2904,25 @@ else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])# AC_PROG_LD
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
-# AC_PROG_LD_GNU
-# --------------
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
@@ -2060,14 +2932,14 @@ case `$LD -v 2>&1 </dev/null` in
;;
esac])
with_gnu_ld=$lt_cv_prog_gnu_ld
-])# AC_PROG_LD_GNU
+])# _LT_PATH_LD_GNU
-# AC_PROG_LD_RELOAD_FLAG
-# ----------------------
+# _LT_CMD_RELOAD
+# --------------
# find reload flag for linker
# -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+m4_defun([_LT_CMD_RELOAD],
[AC_CACHE_CHECK([for $LD option to reload object files],
lt_cv_ld_reload_flag,
[lt_cv_ld_reload_flag='-r'])
@@ -2077,15 +2949,28 @@ case $reload_flag in
*) reload_flag=" $reload_flag" ;;
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
-])# AC_PROG_LD_RELOAD_FLAG
+case $host_os in
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_DECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
-# AC_DEPLIBS_CHECK_METHOD
-# -----------------------
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
# how to check for library dependencies
# -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependent libraries],
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
lt_cv_deplibs_check_method,
[lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
@@ -2102,7 +2987,7 @@ lt_cv_deplibs_check_method='unknown'
# whether `pass_all' will *always* work, you probably want this one.
case $host_os in
-aix4* | aix5*)
+aix[[4-9]]*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -2110,7 +2995,7 @@ beos*)
lt_cv_deplibs_check_method=pass_all
;;
-bsdi4*)
+bsdi[[45]]*)
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB
(shared object|dynamic lib)'
lt_cv_file_magic_cmd='/usr/bin/file -L'
lt_cv_file_magic_test_file=/shlib/libc.so
@@ -2124,8 +3009,20 @@ cygwin*)
mingw* | pw32*)
# Base MSYS/MinGW do not provide the 'file' command needed by
- # func_win32_libid shell function, so use a weaker test based on 'objdump'.
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture:
i386)?'
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ if ( file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ lt_cv_deplibs_check_method='file_magic file format
pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format
pe-arm-.*little(.*architecture: arm)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
;;
@@ -2133,13 +3030,13 @@ darwin* | rhapsody*)
lt_cv_deplibs_check_method=pass_all
;;
-freebsd* | kfreebsd*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
case $host_cpu in
i*86 )
# Not sure whether the presence of OpenBSD here was a mistake.
# Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86
(compact )?demand paged shared library'
+ lt_cv_deplibs_check_method='file_magic
(FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
@@ -2155,7 +3052,7 @@ gnu*)
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
- case "$host_cpu" in
+ case $host_cpu in
ia64*)
lt_cv_deplibs_check_method='file_magic
(s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
@@ -2171,6 +3068,11 @@ hpux10.20* | hpux11*)
esac
;;
+interix[[3-9]]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+ ;;
+
irix5* | irix6* | nonstopux*)
case $LD in
*-32|*"-32 ") libmagic=32-bit;;
@@ -2182,21 +3084,12 @@ irix5* | irix6* | nonstopux*)
;;
# This must be Linux ELF.
-linux*)
- case $host_cpu in
- alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*)
- lt_cv_deplibs_check_method=pass_all ;;
- *)
- # glibc up to 2.1.1 does not perform some relocations on ARM
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB
(shared object|dynamic lib )' ;;
- esac
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+linux* | k*bsd*-gnu)
lt_cv_deplibs_check_method=pass_all
;;
-netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern
/lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
@@ -2209,17 +3102,15 @@ newos6*)
lt_cv_file_magic_test_file=/usr/lib/libnls.so
;;
-nto-qnx*)
- lt_cv_deplibs_check_method=unknown
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
;;
openbsd*)
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB
shared object'
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern
/lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
else
- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+ lt_cv_deplibs_check_method='match_pattern
/lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
fi
;;
@@ -2227,7 +3118,7 @@ osf3* | osf4* | osf5*)
lt_cv_deplibs_check_method=pass_all
;;
-sco3.2v5*)
+rdos*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -2235,7 +3126,11 @@ solaris*)
lt_cv_deplibs_check_method=pass_all
;;
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
case $host_vendor in
motorola)
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB
(shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
@@ -2256,10 +3151,13 @@ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
siemens)
lt_cv_deplibs_check_method=pass_all
;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
esac
;;
-sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
+tpf*)
lt_cv_deplibs_check_method=pass_all
;;
esac
@@ -2267,58 +3165,106 @@ esac
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown
-])# AC_DEPLIBS_CHECK_METHOD
+
+_LT_DECL([], [deplibs_check_method], [1],
+ [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+ [Command to use when deplibs_check_method == "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
-# AC_PROG_NM
+# LT_PATH_NM
# ----------
-# find the pathname to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
lt_cv_path_NM="$NM"
else
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/${ac_tool_prefix}nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
- lt_cv_path_NM="$tmp_nm -B"
- break
- ;;
- *)
- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
- */dev/null*)
- lt_cv_path_NM="$tmp_nm -p"
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/$lt_tmp_nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
break
;;
*)
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
;;
esac
- esac
- fi
+ fi
+ done
+ IFS="$lt_save_ifs"
done
- IFS="$lt_save_ifs"
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+ : ${lt_cv_path_NM=no}
fi])
-NM="$lt_cv_path_NM"
-])# AC_PROG_NM
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
+ AC_SUBST([DUMPBIN])
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+ [lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\""
>&AS_MESSAGE_LOG_FD)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
+ cat conftest.out >&AS_MESSAGE_LOG_FD
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*])
+])# LT_PATH_NM
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
-# AC_CHECK_LIBM
-# -------------
+
+# LT_LIB_M
+# --------
# check for math library
-AC_DEFUN([AC_CHECK_LIBM],
+AC_DEFUN([LT_LIB_M],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case $host in
@@ -2333,2011 +3279,46 @@ case $host in
AC_CHECK_LIB(m, cos, LIBM="-lm")
;;
esac
-])# AC_CHECK_LIBM
-
-
-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL
-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
-# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will
-# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!). If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- case $enable_ltdl_convenience in
- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
- "") enable_ltdl_convenience=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
- esac
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- # For backwards non-gettext consistent compatibility...
- INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_CONVENIENCE
-
-
-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl installable library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments. Note that LIBLTDL
-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
-# DIRECTORY is not provided and an installed libltdl is not found, it is
-# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/'
-# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
-# quotes!). If your package is not flat and you're not using automake,
-# define top_builddir and top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- AC_CHECK_LIB(ltdl, lt_dlinit,
- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
- [if test x"$enable_ltdl_install" = xno; then
- AC_MSG_WARN([libltdl not installed, but installation disabled])
- else
- enable_ltdl_install=yes
- fi
- ])
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
- LTDLINCL=
- fi
- # For backwards non-gettext consistent compatibility...
- INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_INSTALLABLE
-
-
-# AC_LIBTOOL_CXX
-# --------------
-# enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX],
-[AC_REQUIRE([_LT_AC_LANG_CXX])
-])# AC_LIBTOOL_CXX
-
-
-# _LT_AC_LANG_CXX
-# ---------------
-AC_DEFUN([_LT_AC_LANG_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
-])# _LT_AC_LANG_CXX
-
-
-# AC_LIBTOOL_F77
-# --------------
-# enable support for Fortran 77 libraries
-AC_DEFUN([AC_LIBTOOL_F77],
-[AC_REQUIRE([_LT_AC_LANG_F77])
-])# AC_LIBTOOL_F77
-
-
-# _LT_AC_LANG_F77
-# ---------------
-AC_DEFUN([_LT_AC_LANG_F77],
-[AC_REQUIRE([AC_PROG_F77])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
-])# _LT_AC_LANG_F77
-
-
-# AC_LIBTOOL_GCJ
-# --------------
-# enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],
-[AC_REQUIRE([_LT_AC_LANG_GCJ])
-])# AC_LIBTOOL_GCJ
-
-
-# _LT_AC_LANG_GCJ
-# ---------------
-AC_DEFUN([_LT_AC_LANG_GCJ],
-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
-])# _LT_AC_LANG_GCJ
-
-
-# AC_LIBTOOL_RC
-# --------------
-# enable support for Windows resource files
-AC_DEFUN([AC_LIBTOOL_RC],
-[AC_REQUIRE([LT_AC_PROG_RC])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
-])# AC_LIBTOOL_RC
-
-
-# AC_LIBTOOL_LANG_C_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-[lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}\n'
-
-_LT_AC_SYS_COMPILER
-
-#
-# Check for any special shared library compilation flags.
-#
-_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
-if test "$GCC" = no; then
- case $host_os in
- sco3.2v5*)
- _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
- ;;
- esac
-fi
-if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
- AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build
shared libraries])
- if echo "$old_CC $old_CFLAGS " | grep "[[
]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ ]]" >/dev/null; then :
- else
- AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or
CFLAGS env variable and reconfigure])
- _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
- fi
-fi
-
-
-#
-# Check to make sure the static flag actually works.
-#
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag
$_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
- $_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
- [],
- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF($1)
-
-# Report which librarie types wil actually be built
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case "$host_os" in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-
-aix4* | aix5*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
- darwin* | rhapsody*)
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- case "$host_os" in
- rhapsody* | darwin1.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined
suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace
-undefined suppress'
- ;;
- 10.*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o
$lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle
$libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't
exist in older darwin ld's
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,,"
-e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag
-o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname
$verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,,"
-e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_C_CONFIG
-
-
-# AC_LIBTOOL_LANG_CXX_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-[AC_LANG_PUSH(C++)
-AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Dependencies to place before and after the object being linked:
-_LT_AC_TAGVAR(predep_objects, $1)=
-_LT_AC_TAGVAR(postdep_objects, $1)=
-_LT_AC_TAGVAR(predeps, $1)=
-_LT_AC_TAGVAR(postdeps, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
-
-# Source file extension for C++ test sources.
-ac_ext=cc
-
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
- unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
- lt_cv_path_LD=$lt_cv_path_LDCXX
-else
- unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
-
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-else
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-fi
-
-if test "$GXX" = yes; then
- # Set up default GNU C++ configuration
-
- AC_PROG_LD
-
- # Check if GNU C++ uses GNU ld as the underlying linker, since the
- # archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o
$lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
$wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
- # If archive_cmds runs LD, not CC, wlarc should be empty
- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
- # investigate it a little bit more. (MM)
- wlarc='${wl}'
-
- # ancient GNU ld didn't support --whole-archive et. al.
- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
- grep 'no-whole-archive' > /dev/null; then
- _LT_AC_TAGVAR(whole_archive_flag_spec,
$1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- else
- with_gnu_ld=no
- wlarc=
-
- # A generic and very simple default shared library creation
- # command for GNU C++ for the case where it uses the native
- # linker, instead of GNU ld. If possible, this setting should
- # overridden to take advantage of the native linker features on
- # the platform it is being used on.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- fi
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep
"\-L"'
-
-else
- GXX=no
- with_gnu_ld=no
- wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-case $host_os in
- aix3*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
- for ld_flag in $LDFLAGS; do
- case $ld_flag in
- *-brtl*)
- aix_use_runtimelinking=yes
- break
- ;;
- esac
- done
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- _LT_AC_TAGVAR(archive_cmds, $1)=''
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- if test "$GXX" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- else
- # We have old collect2
- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
- fi
- esac
- shared_flag='-shared'
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an empty
executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec,
$1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname
$libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x";
then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag
\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R
$libdir:/usr/lib:/lib'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o
$output_objdir/$soname $libobjs $deplibs $compiler_flags
${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag
\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty
executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec,
$1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # -bexpall does not export symbols beginning with underscore (_)
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- # Exported symbols can be pulled into shared objects from archives
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds it's shared libraries.
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o
$output_objdir/$soname $libobjs $deplibs $compiler_flags
${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS
$output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
- chorus*)
- case $cc_basename in
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname
${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q
$export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname
${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- darwin* | rhapsody*)
- if test "$GXX" = yes; then
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- case "$host_os" in
- rhapsody* | darwin1.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined
suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace
-undefined suppress'
- ;;
- 10.*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- lt_int_apple_cc_single_mod=no
- output_verbose_link_cmd='echo'
- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
- lt_int_apple_cc_single_mod=yes
- fi
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name
$rpath/$soname $verstring'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load
-keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib
$allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags
-install_name $rpath/$soname $verstring'
- fi
- _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load
$allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't
exist in older darwin ld's
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name
$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym
${lib}'
- else
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load
-keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib
$allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags
-install_name $rpath/$soname $verstring~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,,"
-e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- dgux*)
- case $cc_basename in
- ec++)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- ghcx)
- # Green Hills C++ Compiler
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- freebsd[12]*)
- # C++ shared libraries reported to be fairly broken before switch to ELF
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- freebsd-elf*)
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- ;;
- freebsd* | kfreebsd*-gnu)
- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
- # conventions
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
- ;;
- gnu*)
- ;;
- hpux9*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
- # but as the default
- # location of the library.
-
- case $cc_basename in
- CC)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- aCC)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b
${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib ||
mv $output_objdir/$soname $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext
2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in
conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC
-shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test
$output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- case "$host_cpu" in
- hppa*64*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
- ia64*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- ;;
- *)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- ;;
- esac
- fi
- case "$host_cpu" in
- hppa*64*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
- ia64*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
- # but as the default
- # location of the library.
- ;;
- *)
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
- # but as the default
- # location of the library.
- ;;
- esac
-
- case $cc_basename in
- CC)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- aCC)
- case "$host_cpu" in
- hppa*64*|ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib
$linker_flags $libobjs $deplibs'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b
${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags'
- ;;
- esac
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext
2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in
conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; echo $list'
- ;;
- *)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
- case "$host_cpu" in
- ia64*|hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib
$linker_flags $libobjs $deplibs'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC
${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- fi
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- irix5* | irix6*)
- case $cc_basename in
- CC)
- # SGI C++
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname
$soname `test -n "$verstring" && echo -set_version $verstring` -update_registry
${objdir}/so_locations -o $lib'
-
- # Archives containing C++ object files must be created using
- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
- ;;
- *)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring`
${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring`
-o $lib'
- fi
- fi
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- ;;
- esac
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
- linux*)
- case $cc_basename in
- KCC)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e
'\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e
"s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib
$lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext |
$SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED
-e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags --soname $soname -o \$templib
${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o
libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext;
list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";;
*.$objext);; *) list="$list $z";;esac; done; echo $list'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
- ;;
- icpc)
- # Intel C++
- with_gnu_ld=yes
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname
${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_AC_TAGVAR(whole_archive_flag_spec,
$1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
- ;;
- cxx)
- # Compaq C++
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o
$lib ${wl}-retain-symbols-file $wl$export_symbols'
-
- runpath_var=LD_RUN_PATH
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v
conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED
"s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in
conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; echo $list'
- ;;
- esac
- ;;
- lynxos*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- m88k*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- mvs*)
- case $cc_basename in
- cxx)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib
$predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
- wlarc=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- fi
- # Workaround some broken pre-1.5 toolchains
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 |
grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
- ;;
- osf3*)
- case $cc_basename in
- KCC)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e
'\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e
"s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib
$lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-
- ;;
- RCC)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- cxx)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved
${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
$soname `test -n "$verstring" && echo ${wl}-set_version $verstring`
-update_registry ${objdir}/so_locations -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v
conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist |
$SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z
in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; echo $list'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved
${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo
${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${objdir}/so_locations -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath
${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1
| grep "\-L"'
-
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- osf4* | osf5*)
- case $cc_basename in
- KCC)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e
'\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e
"s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib
$lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Archives containing C++ object files must be created using
- # the KAI C++ compiler.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
- ;;
- RCC)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- cxx)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym
-soname $soname `test -n "$verstring" && echo -set_version $verstring`
-update_registry ${objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`;
do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp
`test -n "$verstring" && echo -set_version $verstring` -update_registry
$objdir/so_locations -o $lib~
- $rm $lib.exp'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v
conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist |
$SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z
in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; echo $list'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved
${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" &&
echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${objdir}/so_locations -o $lib'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath
${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1
| grep "\-L"'
-
- else
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- psos*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- sco*)
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- case $cc_basename in
- CC)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- sunos4*)
- case $cc_basename in
- CC)
- # Sun C++ 4.x
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- lcc)
- # Lucid
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- solaris*)
- case $cc_basename in
- CC)
- # Sun C++ 4.2, 5.x and Centerline C++
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib
-h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" >
$lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo
"local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o
$lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm
$lib.exp'
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- # The C++ compiler is used as linker so we must use $wl
- # flag to pass the commands to the underlying system
- # linker.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z
${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- ;;
- esac
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext
2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in
conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; echo $list'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
- ;;
- gcx)
- # Green Hills C++ Compiler
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
- # The C++ compiler must be used to create the archive.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib
$oldobjs'
- ;;
- *)
- # GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
- if $CC --version | grep -v '^2\.7' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h
$wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" >
$lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo
"local: *; };" >> $lib.exp~
- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext
2>&1 | grep \"\-L\""
- else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
- # platform.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h
$wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" >
$lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo
"local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 |
grep \"\-L\""
- fi
-
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
- fi
- ;;
- esac
- ;;
- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- ;;
- tandem*)
- case $cc_basename in
- NCC)
- # NonStop-UX NCC 3.20
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
- vxworks*)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-esac
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+AC_SUBST([LIBM])
+])# LT_LIB_M
-_LT_AC_TAGVAR(GCC, $1)="$GXX"
-_LT_AC_TAGVAR(LD, $1)="$LD"
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-AC_LIBTOOL_POSTDEP_PREDEP($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF($1)
-
-AC_LIBTOOL_CONFIG($1)
-AC_LANG_POP
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-])# AC_LIBTOOL_LANG_CXX_CONFIG
-
-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-# ------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library. It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
-int a;
-void foo (void) { a = 0; }
-EOF
-],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
- Foo (void) { a = 0; }
-private:
- int a;
-};
-EOF
-],[$1],[F77],[cat > conftest.$ac_ext <<EOF
- subroutine foo
- implicit none
- integer*4 a
- a=0
- return
- end
-EOF
-],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
-public class foo {
- private int a;
- public void bar (void) {
- a = 0;
- }
-};
-EOF
-])
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
- # Parse the compiler output and extract the necessary
- # objects, libraries and library flags.
-
- # Sentinel used to keep track of whether or not we are before
- # the conftest object file.
- pre_test_object_deps_done=no
-
- # The `*' in the case matches for architectures that use `case' in
- # $output_verbose_cmd can trigger glob expansion during the loop
- # eval without this substitution.
- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e
\"$no_glob_subst\"`"
-
- for p in `eval $output_verbose_link_cmd`; do
- case $p in
-
- -L* | -R* | -l*)
- # Some compilers place space between "-{L,R}" and the path.
- # Remove the space.
- if test $p = "-L" \
- || test $p = "-R"; then
- prev=$p
- continue
- else
- prev=
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- case $p in
- -L* | -R*)
- # Internal compiler library paths should come after those
- # provided the user. The postdeps already come after the
- # user supplied libs so there is no need to process them.
- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
- else
- _LT_AC_TAGVAR(compiler_lib_search_path,
$1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
- fi
- ;;
- # The "-l" case would never come before the object being
- # linked, so don't bother handling this case.
- esac
- else
- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
- else
- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)}
${prev}${p}"
- fi
- fi
- ;;
-
- *.$objext)
- # This assumes that the test object file only shows up
- # once in the compiler output.
- if test "$p" = "conftest.$objext"; then
- pre_test_object_deps_done=yes
- continue
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
- _LT_AC_TAGVAR(predep_objects, $1)="$p"
- else
- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects,
$1) $p"
- fi
- else
- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
- _LT_AC_TAGVAR(postdep_objects, $1)="$p"
- else
- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects,
$1) $p"
- fi
- fi
- ;;
-
- *) ;; # Ignore the rest.
-
- esac
- done
-
- # Clean up.
- rm -f a.out a.exe
-else
- echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$rm -f confest.$objext
-
-case " $_LT_AC_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
-])# AC_LIBTOOL_POSTDEP_PREDEP
-
-# AC_LIBTOOL_LANG_F77_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
-AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
-[AC_REQUIRE([AC_PROG_F77])
-AC_LANG_PUSH(Fortran 77)
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code=" subroutine t\n return\n end\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code=" program t\n end\n"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
-
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case "$host_os" in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-aix4* | aix5*)
- test "$enable_shared" = yes && enable_static=no
- ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_AC_TAGVAR(GCC, $1)="$G77"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_F77_CONFIG
-
-
-# AC_LIBTOOL_LANG_GCJ_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}\n"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void
main(String[] argv) {}; }\n'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF($1)
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_GCJ_CONFIG
-
-
-# AC_LIBTOOL_LANG_RC_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the Windows resource compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_RC_CONFIG
-
-
-# AC_LIBTOOL_CONFIG([TAGNAME])
-# ----------------------------
-# If TAGNAME is not passed, then create an initial libtool script
-# with a default configuration from the untagged config vars. Otherwise
-# add code to config.status for appending the configuration named by
-# TAGNAME from the matching tagged config vars.
-AC_DEFUN([AC_LIBTOOL_CONFIG],
-[# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands
through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- _LT_AC_TAGVAR(compiler, $1) \
- _LT_AC_TAGVAR(CC, $1) \
- _LT_AC_TAGVAR(LD, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
- _LT_AC_TAGVAR(old_archive_cmds, $1) \
- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
- _LT_AC_TAGVAR(predep_objects, $1) \
- _LT_AC_TAGVAR(postdep_objects, $1) \
- _LT_AC_TAGVAR(predeps, $1) \
- _LT_AC_TAGVAR(postdeps, $1) \
- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
- _LT_AC_TAGVAR(archive_cmds, $1) \
- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
- _LT_AC_TAGVAR(postinstall_cmds, $1) \
- _LT_AC_TAGVAR(postuninstall_cmds, $1) \
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
- _LT_AC_TAGVAR(allow_undefined_flag, $1) \
- _LT_AC_TAGVAR(no_undefined_flag, $1) \
- _LT_AC_TAGVAR(export_symbols_cmds, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
- _LT_AC_TAGVAR(hardcode_automatic, $1) \
- _LT_AC_TAGVAR(module_cmds, $1) \
- _LT_AC_TAGVAR(module_expsym_cmds, $1) \
- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
- _LT_AC_TAGVAR(exclude_expsyms, $1) \
- _LT_AC_TAGVAR(include_expsyms, $1); do
-
- case $var in
- _LT_AC_TAGVAR(old_archive_cmds, $1) | \
- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
- _LT_AC_TAGVAR(archive_cmds, $1) | \
- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
- _LT_AC_TAGVAR(module_cmds, $1) | \
- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e
\"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e
\"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e
\"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\[$]0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0
--fallback-echo"[$]/[$]0 --fallback-echo"/'`
- ;;
- esac
-
-ifelse([$1], [],
- [cfgfile="${ofile}T"
- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
- $rm -f "$cfgfile"
- AC_MSG_NOTICE([creating $ofile])],
- [cfgfile="$ofile"])
-
- cat <<__EOF__ >> "$cfgfile"
-ifelse([$1], [],
-[#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building
support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <address@hidden>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG],
-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes,
$1)
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# A language-specific compiler.
-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
-
-# Is the compiler the GNU C compiler?
-with_gcc=$_LT_AC_TAGVAR(GCC, $1)
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-
-# Must we lock files when doing compilation ?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds,
$1)
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld,
$1)
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR
into the
-# resulting binary.
-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
-
-# Set to yes if building a shared library automatically hardcodes DIR into the
library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
-
-# Symbols that must always be exported.
-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-
-ifelse([$1],[],
-[# ### END LIBTOOL CONFIG],
-[# ### END LIBTOOL TAG CONFIG: $tagname])
-
-__EOF__
-
-ifelse([$1],[], [
- case $host_os in
- aix3*)
- cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program. For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
-fi
-EOF
- ;;
- esac
-
- # We use sed instead of cat because bash on DJGPP gets confused if
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
- mv -f "$cfgfile" "$ofile" || \
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
-])
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-])# AC_LIBTOOL_CONFIG
-
-
-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-
-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
if test "$GCC" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
lt_cv_prog_compiler_rtti_exceptions,
[-fno-rtti -fno-exceptions], [],
- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag,
$1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti
-fno-exceptions"])
+ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag,
$1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti
-fno-exceptions"])
fi
-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+ [Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
# Check for command to grab the raw symbol name followed by C symbol from nm.
AC_MSG_CHECKING([command to parse $NM output from $compiler object])
AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
@@ -4351,29 +3332,18 @@ symcode='[[BCDEGRST]]'
# Regexp to match symbols that can be accessed directly from C.
sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/
{\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/
{\"\2\", (lt_ptr) \&\2},/p'"
-
# Define system-specific variables.
case $host_os in
aix*)
symcode='[[BCDT]]'
;;
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
symcode='[[ABCDGISTW]]'
;;
-hpux*) # Its linker distinguishes data from code symbols
+hpux*)
if test "$host_cpu" = ia64; then
symcode='[[ABCDEGRST]]'
fi
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int
\1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/
{\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/
{\"\2\", (lt_ptr) \&\2},/p'"
;;
irix* | nonstopux*)
symcode='[[BCDEGRST]]'
@@ -4381,49 +3351,89 @@ irix* | nonstopux*)
osf*)
symcode='[[BCDEGQRST]]'
;;
-solaris* | sysv5*)
+solaris*)
symcode='[[BDRT]]'
;;
+sco3.2v5*)
+ symcode='[[DT]]'
+ ;;
+sysv4.2uw2*)
+ symcode='[[DT]]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[[ABDT]]'
+ ;;
sysv4)
symcode='[[DFNSTU]]'
;;
esac
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int
\1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/
{\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/
{\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^
]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^
]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/
{\"lib\2\", (void *) \&\2},/p'"
+
# Handle CRLF in mingw tool chain
opt_cr=
case $build_os in
mingw*)
- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
;;
esac
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
- symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Try without a prefix undercore, then with it.
+# Try without a prefix underscore, then with it.
for ac_symprfx in "" "_"; do
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
# Write the raw and C identifiers.
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[
]]\($symcode$symcode*\)[[ ]][[
]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK ['"\
+" {last_section=section; section=\$ 3};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/address@hidden/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx]"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[
]]\($symcode$symcode*\)[[ ]][[
]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
# Check to see that the pipe works correctly.
pipe_works=no
rm -f conftest*
- cat > conftest.$ac_ext <<EOF
+ cat > conftest.$ac_ext <<_LT_EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
-void nm_test_func(){}
+void nm_test_func(void);
+void nm_test_func(void){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
+_LT_EOF
if AC_TRY_EVAL(ac_compile); then
# Now try to grab the symbols.
@@ -4437,48 +3447,50 @@ EOF
fi
# Make sure that we snagged all the symbols we need.
- if grep ' nm_test_var$' "$nlist" >/dev/null; then
- if grep ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<EOF > conftest.$ac_ext
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
#ifdef __cplusplus
extern "C" {
#endif
-EOF
+_LT_EOF
# Now generate the symbol file.
- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main
>> conftest.$ac_ext'
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main
>> conftest.$ac_ext'
- cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
+ cat <<_LT_EOF >> conftest.$ac_ext
-/* The mapping between symbol names and symbols. */
+/* The mapping between symbol names and symbols. */
const struct {
const char *name;
- lt_ptr_t address;
+ void *address;
}
-lt_preloaded_symbols[[]] =
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
{
-EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t)
\&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
- cat <<\EOF >> conftest.$ac_ext
- {0, (lt_ptr_t) 0}
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *)
\&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
};
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
#ifdef __cplusplus
}
#endif
-EOF
+_LT_EOF
# Now try linking the two files.
mv conftest.$ac_objext conftstm.$ac_objext
lt_save_LIBS="$LIBS"
lt_save_CFLAGS="$CFLAGS"
LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
pipe_works=yes
fi
@@ -4497,7 +3509,7 @@ EOF
echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
cat conftest.$ac_ext >&5
fi
- rm -f conftest* conftst*
+ rm -rf conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
if test "$pipe_works" = yes; then
@@ -4515,127 +3527,162 @@ if test -z
"$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; the
else
AC_MSG_RESULT(ok)
fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+ [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+ [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+ [lt_cv_sys_global_symbol_to_c_name_address], [1],
+ [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+ [Transform the output of nm in a C name address pair when lib prefix is
needed])
+]) # _LT_CMD_GLOBAL_SYMBOLS
-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-# ---------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
AC_MSG_CHECKING([for $compiler option to produce PIC])
- ifelse([$1],[CXX],[
+m4_if([$1], [CXX], [
# C++ specific cases for pic, static, wl, etc.
if test "$GXX" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
# All AIX code is PIC.
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
;;
+
amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32
-malways-restore-a4'
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything
better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32
-malways-restore-a4'
+ ;;
+ esac
;;
- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
- mingw* | os2* | pw32*)
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
;;
*djgpp*)
# DJGPP does not support shared libraries at all
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
;;
sysv4*MP*)
if test -d /usr/nec; then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
fi
;;
hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case "$host_cpu" in
- hppa*64*|ia64*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
;;
*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
else
case $host_os in
- aix4* | aix5*)
+ aix[[4-9]]*)
# All AIX code is PIC.
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso
-bI:/lib/syscalls.exp'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
fi
;;
chorus*)
case $cc_basename in
- cxch68)
+ cxch68*)
# Green Hills C++ Compiler
- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation
-u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a
$MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u
__main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a
$MVME_DIR/lib/classix/libcx.s.a"
;;
esac
;;
dgux*)
case $cc_basename in
- ec++)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ec++*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
;;
- ghcx)
+ ghcx*)
# Green Hills C++ Compiler
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
*)
;;
esac
;;
- freebsd* | kfreebsd*-gnu)
+ freebsd* | dragonfly*)
# FreeBSD uses GNU C++
;;
hpux9* | hpux10* | hpux11*)
case $cc_basename in
- CC)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a
${ac_cv_prog_cc_wl}archive"
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
if test "$host_cpu" != ia64; then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
fi
;;
- aCC)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a
${ac_cv_prog_cc_wl}archive"
- case "$host_cpu" in
+ aCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
;;
esac
;;
@@ -4643,38 +3690,69 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
;;
esac
;;
+ interix*)
+ # This is c89, which is MS Visual C++ (no shared libs)
+ # Anyone wants to do a port?
+ ;;
irix5* | irix6* | nonstopux*)
case $cc_basename in
- CC)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
# CC pic flag -KPIC is the default.
;;
*)
;;
esac
;;
- linux*)
+ linux* | k*bsd*-gnu)
case $cc_basename in
- KCC)
+ KCC*)
# KAI C++ Compiler
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
- icpc)
- # Intel C++
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ecpc* )
+ # old Intel C++ for x86_64 which still supported -KPIC.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ icpc* )
+ # Intel C++, used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
- cxx)
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ cxx*)
# Compaq C++
# Make sure the PIC flag is empty. It appears that all Alpha
# Linux and Compaq Tru64 Unix objects are PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xlc* | xlC*)
+ # IBM XL 8.0 on PPC
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
;;
*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ esac
;;
esac
;;
@@ -4684,31 +3762,36 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
;;
mvs*)
case $cc_basename in
- cxx)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+ cxx*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
;;
*)
;;
esac
;;
- netbsd*)
+ netbsd* | netbsdelf*-gnu)
;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
osf3* | osf4* | osf5*)
case $cc_basename in
- KCC)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ KCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
;;
- RCC)
+ RCC*)
# Rational C++ 2.4.1
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
- cxx)
+ cxx*)
# Digital/Compaq C++
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# Make sure the PIC flag is empty. It appears that all Alpha
# Linux and Compaq Tru64 Unix objects are PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
*)
;;
@@ -4716,26 +3799,17 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
;;
psos*)
;;
- sco*)
- case $cc_basename in
- CC)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- *)
- ;;
- esac
- ;;
solaris*)
case $cc_basename in
- CC)
+ CC*)
# Sun C++ 4.2, 5.x and Centerline C++
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
;;
- gcx)
+ gcx*)
# Green Hills C++ Compiler
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
;;
*)
;;
@@ -4743,309 +3817,436 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
;;
sunos4*)
case $cc_basename in
- CC)
+ CC*)
# Sun C++ 4.x
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
- lcc)
+ lcc*)
# Lucid
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
*)
;;
esac
;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
tandem*)
case $cc_basename in
- NCC)
+ NCC*)
# NonStop-UX NCC 3.20
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
;;
*)
;;
esac
;;
- unixware*)
- ;;
vxworks*)
;;
*)
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
;;
esac
fi
],
[
if test "$GCC" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
# All AIX code is PIC.
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
;;
amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32
-malways-restore-a4'
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything
better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32
-malways-restore-a4'
+ ;;
+ esac
;;
- beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
- mingw* | pw32* | os2*)
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
;;
msdosdjgpp*)
# Just because we use GCC doesn't mean we suddenly get shared libraries
# on systems that don't support them.
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
enable_shared=no
;;
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
sysv4*MP*)
if test -d /usr/nec; then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
fi
;;
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case "$host_cpu" in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- ;;
-
*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
else
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
aix*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
fi
;;
- mingw* | pw32* | os2*)
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
;;
hpux9* | hpux10* | hpux11*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled
CC?
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# PIC (with -KPIC) is the default.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
- newsos6)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- linux*)
- case $CC in
- icc* | ecc*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ linux* | k*bsd*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
ccc*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# All Alpha code is PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
+ xl*)
+ # IBM XL C 8.0/Fortran 10.1 on PPC
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ ;;
+ *Sun\ F*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+ ;;
+ esac
+ ;;
esac
;;
+ newsos6)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
osf3* | osf4* | osf5*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# All OSF/1 code is PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
- sco3.2v5*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
+ rdos*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
solaris*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+ esac
;;
sunos4*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
sysv4*MP*)
if test -d /usr/nec ;then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ unicos*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+
uts4*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
*)
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
;;
esac
fi
])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic,
$1)@&address@hidden([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+ ;;
+esac
+AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+ [How to pass a linker flag through the compiler])
#
# Check to make sure the PIC flag actually works.
#
-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag
$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
- _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[
-DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic,
$1) works],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&address@hidden([$1],[],[
-DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
"" | " "*) ;;
- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="
$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)="
$_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
esac],
- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
fi
-case "$host_os" in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic,
$1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[
-DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
- ;;
-esac
-])
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+ [Additional compiler flags for building library objects])
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval
lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+ $lt_tmp_static_flag,
+ [],
+ [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+ [Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-# ------------------------------------
+
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
# See if the linker supports building shared libraries.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared
libraries])
-ifelse([$1],[CXX],[
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience |
$global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience |
$global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
case $host_os in
- aix4* | aix5*)
+ aix[[4-9]]*)
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience |
awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) &&
([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience |
awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$
3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience
| awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) &&
([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience |
awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$
3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
;;
- cygwin* | mingw*)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience |
$global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' |
$SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+ cygwin* | mingw* | cegcc*)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience |
$global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1
DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[
]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ linux* | k*bsd*-gnu)
+ _LT_TAGVAR(link_all_deplibs, $1)=no
;;
*)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience |
$global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience |
$global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
;;
esac
-],[
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+], [
runpath_var=
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
- _LT_AC_TAGVAR(archive_cmds, $1)=
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
- _LT_AC_TAGVAR(hardcode_automatic, $1)=no
- _LT_AC_TAGVAR(module_cmds, $1)=
- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience |
$global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)=
+ _LT_TAGVAR(archive_expsym_cmds, $1)=
+ _LT_TAGVAR(compiler_needs_object, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience |
$global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(hardcode_automatic, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ _LT_TAGVAR(hardcode_minus_L, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_TAGVAR(inherit_rpath, $1)=no
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+ _LT_TAGVAR(thread_safe_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
- _LT_AC_TAGVAR(include_expsyms, $1)=
+ _LT_TAGVAR(include_expsyms, $1)=
# exclude_expsyms can be an extended regexp of symbols to exclude
# it will be wrapped by ` (' and `)$', so one must not match beginning or
# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
# as well as any symbol that contains `d'.
- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced. Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
extract_expsyms_cmds=
case $host_os in
- cygwin* | mingw* | pw32*)
+ cygwin* | mingw* | pw32* | cegcc*)
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
@@ -5053,23 +4254,51 @@ ifelse([$1],[CXX],[
with_gnu_ld=no
fi
;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
openbsd*)
with_gnu_ld=no
;;
+ linux* | k*bsd*-gnu)
+ _LT_TAGVAR(link_all_deplibs, $1)=no
+ ;;
esac
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+ _LT_TAGVAR(ld_shlibs, $1)=yes
if test "$with_gnu_ld" = yes; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec,
$1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
# See if GNU ld supports shared libraries.
case $host_os in
- aix3* | aix4* | aix5*)
+ aix[[3-9]]*)
# On AIX/PPC, the GNU linker is very broken
if test "$host_cpu" != ia64; then
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- cat <<EOF 1>&2
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
*** Warning: the GNU linker, at least up to release 2.9.1, is reported
*** to be unable to reliably create shared libraries on AIX.
@@ -5077,74 +4306,160 @@ ifelse([$1],[CXX],[
*** really care for shared libraries, you may want to modify your PATH
*** so that a non-GNU linker is found, and then restart.
-EOF
+_LT_EOF
fi
;;
amigaos*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm
$output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" >
$output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >>
$output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >>
$output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >>
$output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd
$output_objdir && a2ixlibrary -32)'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-
- # Samuel A. Falvo II <address@hidden> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM
$output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" >
$output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >>
$output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >>
$output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >>
$output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd
$output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
;;
beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <address@hidden> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname -o $lib'
else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ _LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience |
$global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' |
$SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000
${wl}--out-implib,$lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience |
$global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1
DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq >
$export_symbols'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base
-Xlinker --out-implib -Xlinker $lib'
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q
$export_symbols`" = xEXPORTS; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q
$export_symbols`" = xEXPORTS; then
cp $export_symbols $output_objdir/$soname.def;
else
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs
$compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000
${wl}--out-implib,$lib'
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs
$compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base
-Xlinker --out-implib -Xlinker $lib'
else
- ld_shlibs=no
+ _LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs
$linker_flags -o $lib'
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs
$compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2
\* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols
>$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs
$compiler_flags ${wl}-h,$soname
${wl}--retain-symbols-file,$output_objdir/$soname.expsym
${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking
(!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for
conv in $convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"`
${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for
conv in $convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"`
${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ tmp_sharedflag='--shared' ;;
+ xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf
below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ _LT_TAGVAR(whole_archive_flag_spec,
$1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do
test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO
\"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"'
$libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" >
$output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >>
$output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname ${wl}-version-script
${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience
--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs
$compiler_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" >
$output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >>
$output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname
-version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs
$linker_flags -o $lib'
wlarc=
else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file
$wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file
$wl$export_symbols -o $lib'
fi
;;
- solaris* | sysv5*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- cat <<EOF 1>&2
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems. Therefore, libtool
@@ -5153,86 +4468,87 @@ EOF
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null;
then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file
$wl$export_symbols -o $lib'
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null;
then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file
$wl$export_symbols -o $lib'
else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ _LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null;
then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file
$wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
sunos4*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o
$lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib
$libobjs $deplibs $linker_flags'
wlarc=
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
- linux*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags
${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds"
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
- if test $supports_anon_versioning = yes; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" >
$output_objdir/$libname.ver~
-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-$echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname
${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- else
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds"
- fi
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file
$wl$export_symbols -o $lib'
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file
$wl$export_symbols -o $lib'
else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ _LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
- runpath_var=LD_RUN_PATH
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- _LT_AC_TAGVAR(whole_archive_flag_spec,
$1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- fi
+ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+ runpath_var=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
case $host_os in
aix3*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname
$libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR
$AR_FLAGS $lib $output_objdir/$soname'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname
$libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR
$AR_FLAGS $lib $output_objdir/$soname'
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- if test "$GCC" = yes && test -z "$link_static_flag"; then
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
fi
;;
- aix4* | aix5*)
+ aix[[4-9]]*)
if test "$host_cpu" = ia64; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
@@ -5242,23 +4558,24 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
else
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs
$convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 ==
"B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u >
$export_symbols'
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience |
awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$
3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs
$convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 ==
"B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u >
$export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience
| awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) &&
([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
# need to do runtime linking.
- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
done
+ ;;
esac
exp_sym_flag='-bexport'
@@ -5271,174 +4588,143 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
- _LT_AC_TAGVAR(archive_cmds, $1)=''
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
- # We have reworked collect2
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ # We have reworked collect2
+ :
else
- # We have old collect2
- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
fi
+ ;;
esac
shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=no
else
# not using gcc
if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
+ if test "$aix_use_runtimelinking" = yes; then
shared_flag='${wl}-G'
else
shared_flag='${wl}-bM:SRE'
- fi
+ fi
fi
fi
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to
export.
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(always_export_symbols, $1)=yes
if test "$aix_use_runtimelinking" = yes; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an empty
executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec,
$1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o
$output_objdir/$soname $libobjs $deplibs $compiler_flags `if test
"x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}";
else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols
$shared_flag"
- else
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX
+ _LT_TAGVAR(hardcode_libdir_flag_spec,
$1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname
$libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test
"x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" |
$Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
if test "$host_cpu" = ia64; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R
$libdir:/usr/lib:/lib'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o
$output_objdir/$soname $libobjs $deplibs $compiler_flags
${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag
\${wl}$exp_sym_flag:\$export_symbols"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R
$libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o
$output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"'
$compiler_flags ${wl}${allow_undefined_flag}
'"\${wl}$exp_sym_flag:\$export_symbols"
else
- # Determine the default libpath from the value encoded in an empty
executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec,
$1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX
+ _LT_TAGVAR(hardcode_libdir_flag_spec,
$1)='${wl}-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # -bexpall does not export symbols beginning with underscore (_)
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
# Exported symbols can be pulled into shared objects from archives
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds it's shared
libraries.
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o
$output_objdir/$soname $libobjs $deplibs $compiler_flags
${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS
$output_objdir/$libname$release.a $output_objdir/$soname'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared
libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o
$output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags
${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS
$output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
;;
amigaos*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm
$output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" >
$output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >>
$output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >>
$output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >>
$output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd
$output_objdir && a2ixlibrary -32)'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- # see comment about different semantics on the GNU ld section
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM
$output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" >
$output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >>
$output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >>
$output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >>
$output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd
$output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
;;
- bsdi4*)
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+ bsdi[[45]]*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
;;
- cygwin* | mingw* | pw32*)
+ cygwin* | mingw* | pw32* | cegcc*)
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=".dll"
# FIXME: Setting linknames here is a bad hack.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags
`echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags
`$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
# FIXME: Should let the user specify the lib program.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib
/OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path='`cygpath -w "$srcfile"`'
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
darwin* | rhapsody*)
- if test "$GXX" = yes ; then
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- case "$host_os" in
- rhapsody* | darwin1.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined
suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace
-undefined suppress'
- ;;
- 10.*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- lt_int_apple_cc_single_mod=no
- output_verbose_link_cmd='echo'
- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
- lt_int_apple_cc_single_mod=yes
- fi
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name
$rpath/$soname $verstring'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load
-keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib
$allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags
-install_name $rpath/$soname $verstring'
- fi
- _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load
$allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't
exist in older darwin ld's
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name
$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym
${lib}'
- else
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load
-keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib
$allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags
-install_name $rpath/$soname $verstring~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
+ _LT_DARWIN_LINKER_FEATURES($1)
;;
dgux*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs
$deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs
$deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
freebsd1*)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ _LT_TAGVAR(ld_shlibs, $1)=no
;;
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
@@ -5446,91 +4732,106 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
# does not break anything, and helps significantly (at the cost of a little
# extra space).
freebsd2.2*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs
$deplibs $linker_flags /usr/lib/c++rt0.o'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs
$linker_flags /usr/lib/c++rt0.o'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
# Unfortunately, older versions of FreeBSD 2 do not have this feature.
freebsd2*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs
$deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs
$linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | kfreebsd*-gnu)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs
$compiler_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ freebsd* | dragonfly*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs
$compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
hpux9*)
if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared
-fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs
$compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname
$lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared
-fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs
$compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname
$lib'
else
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b
$install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test
$output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b
$install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test
$output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
;;
- hpux10* | hpux11*)
+ hpux10*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case "$host_cpu" in
- hppa*64*|ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o
$lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname
${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o
$lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o
$lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname
${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h
${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs
$compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname
${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
- case "$host_cpu" in
- hppa*64*|ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs
$deplibs $linker_flags'
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib
$libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname
${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir
-o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b
${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
fi
if test "$with_gnu_ld" = no; then
- case "$host_cpu" in
- hppa*64*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
- ia64*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
;;
esac
fi
@@ -5538,236 +4839,290 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo
${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO
"X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry
${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo
${wl}-update_registry ${wl}/dev/null"
+ AC_LINK_IFELSE(int foo(void) {},
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO
"X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry
${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o
$lib'
+ )
+ LDFLAGS="$save_LDFLAGS"
else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs
$linker_flags -soname $soname `test -n "$verstring" && echo -set_version
$verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version
$verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version
$verstring" | $Xsed` -update_registry ${output_objdir}/so_locations
-exports_file $export_symbols -o $lib'
fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
;;
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs
$deplibs $linker_flags' # a.out
+ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs
$linker_flags' # a.out
else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs
$linker_flags' # ELF
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs
$linker_flags' # ELF
fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
newsos6)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs
$deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs
$deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *nto* | *qnx*)
;;
openbsd*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs
$deplibs $compiler_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs
$deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib
$libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ else
+ case $host_os in
+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs
$deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib
$libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
else
- case $host_os in
- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs
$deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib
$libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- ;;
- esac
+ _LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
os2*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" >
$output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >>
$output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo "
SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >>
$output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC
-Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags
$output_objdir/$libname.def'
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o
$output_objdir/$libname.a $output_objdir/$libname.def'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" >
$output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >>
$output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO "
SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >>
$output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC
-Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags
$output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o
$output_objdir/$libname.a $output_objdir/$libname.def'
;;
osf3*)
if test "$GCC" = yes; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved
${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n
"$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n
"$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed`
${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag}
$libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo
-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" &&
$ECHO "X-set_version $verstring" | $Xsed` -update_registry
${output_objdir}/so_locations -o $lib'
fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved
${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n
"$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n
"$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed`
${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
else
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag}
$libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" &&
echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o
$lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`;
do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">>
$lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags
$libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version
$verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring"
&& $ECHO "X-set_version $verstring" | $Xsed` -update_registry
${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do
printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n"
"-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp
$compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" &&
$ECHO "X-set_version $verstring" | $Xsed` -update_registry
${output_objdir}/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
fi
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
-
- sco3.2v5*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs
$deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
;;
solaris*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o
$lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" >
$lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo
"local: *; };" >> $lib.exp~
- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib
$libobjs $deplibs $compiler_flags~$rm $lib.exp'
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h
${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat
$export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >>
$lib.exp~
+ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h
${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h
$soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" >
$lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo
"local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs
$deplibs $linker_flags~$rm $lib.exp'
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h
$soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat
$export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >>
$lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs
$deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h
$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat
$export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >>
$lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs
$deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience
-z defaultextract' ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z
${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z
defaultextract'
+ fi
+ ;;
esac
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
;;
sunos4*)
if test "x$host_vendor" = xsequent; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib
$libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs
$deplibs $compiler_flags'
else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib
$libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib
$libobjs $deplibs $linker_flags'
fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
sysv4)
case $host_vendor in
sni)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs
$deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs
$deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
;;
siemens)
## LD is ld it makes a PLAMLIB
## CC just makes a GrossModule.
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs
$linker_flags'
- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs
$linker_flags'
+ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+ _LT_TAGVAR(hardcode_direct, $1)=no
;;
motorola)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs
$deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but
my tests say they lie
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs
$deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my
tests say they lie
;;
esac
runpath_var='LD_RUN_PATH'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
sysv4.3*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs
$deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs
$deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
;;
sysv4*MP*)
if test -d /usr/nec; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs
$deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs
$deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+ _LT_TAGVAR(ld_shlibs, $1)=yes
fi
;;
- sysv4.2uw2*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs
$linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- hardcode_runpath_var=yes
- runpath_var=LD_RUN_PATH
- ;;
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* |
sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o
$lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib
$libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared
${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs
$compiler_flags'
else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib
$libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs
$deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G
${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs
$compiler_flags'
fi
- runpath_var='LD_RUN_PATH'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
- sysv5*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
- # $CC -shared without GNU ld will not create a library from C++
- # object files and a static libstdc++, better avoid it by now
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h
$soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat
$export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >>
$lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib
$libobjs $deplibs $linker_flags~$rm $lib.exp'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib
$libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared
${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs
$compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs
$deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G
${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs
$compiler_flags'
+ fi
;;
uts4*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs
$deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs
$deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ _LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
fi
])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX
COMPILER_PATH LIBRARY_PATH"
-fi
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+ [The commands to extract the exported symbol list from a shared archive])
#
# Do we need to explicitly link libc?
#
-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
x|xyes)
# Assume -lc should be added
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $_LT_AC_TAGVAR(archive_cmds, $1) in
+ case $_LT_TAGVAR(archive_cmds, $1) in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
;;
@@ -5776,120 +5131,1934 @@ x|xyes)
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
AC_MSG_CHECKING([whether -lc should be explicitly linked in])
- $rm conftest*
- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
soname=conftest
lib=conftest
libobjs=conftest.$ac_objext
deplibs=
- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
compiler_flags=-v
linker_flags=-v
verstring=
output_objdir=.
libname=conftest
- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc
\" \>/dev/null 2\>\&1)
+ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \"
\>/dev/null 2\>\&1)
then
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
else
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
fi
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
else
cat conftest.err 1>&5
fi
- $rm conftest*
- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
+ $RM conftest*
+ AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
;;
esac
fi
;;
esac
-])# AC_LIBTOOL_PROG_LD_SHLIBS
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+ [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+ [enable_shared_with_static_runtimes], [0],
+ [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+ [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+ [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+ [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+ [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+ [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+ [Commands used to build a loadable module if different from building
+ a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+ [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+ [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+ [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+ [Flag to hardcode $libdir into a binary during linking.
+ This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
+ [[If ld is used when linking, flag to hardcode $libdir into a binary
+ during linking. This must work even if $libdir does not exist]])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+ [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary and the resulting library dependency is
+ "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+ library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+ [Set to "yes" if building a shared library automatically hardcodes DIR
+ into the library and all subsequent libraries and executables linked
+ against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+ [Set to yes if linker adds runtime paths of dependent libraries
+ to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+ [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [fix_srcfile_path], [1],
+ [Fix the shell variable $srcfile for the compiler])
+_LT_TAGDECL([], [always_export_symbols], [0],
+ [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+ [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+ [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+ [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+ [Commands necessary for linking programs (against libraries) with
templates])
+_LT_TAGDECL([], [file_list_spec], [1],
+ [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
-# _LT_AC_FILE_LTDLL_C
-# -------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# # ifdef __CYGWIN32__
-# # define __CYGWIN__ __CYGWIN32__
-# # endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-# __hDllInstance_base = hInst;
-# return TRUE;
-# }
-# /* ltdll.c ends here */
-])# _LT_AC_FILE_LTDLL_C
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+ LT_SYS_DLOPEN_SELF
+ _LT_CMD_STRIPLIB
+
+ # Report which library types will actually be built
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_PROG_CXX
+# ------------
+# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+# compiler, we have our own version here.
+m4_defun([_LT_PROG_CXX],
+[
+pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+AC_PROG_CXX
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ AC_PROG_CXXCPP
+else
+ _lt_caught_CXX_error=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_CXX
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_CXX], [])
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[AC_REQUIRE([_LT_PROG_CXX])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="int some_variable = 0;"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+ lt_save_with_gnu_ld=$with_gnu_ld
+ lt_save_path_LD=$lt_cv_path_LD
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ # We don't want -fno-exception when compiling C++ code, so set the
+ # no_builtin_flag separately
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+ else
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+ fi
+
+ if test "$GXX" = yes; then
+ # Set up default GNU C++ configuration
+
+ LT_PATH_LD
+
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o
$lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
$wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='${wl}'
+
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+ $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec,
$1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 |
$GREP "\-L"'
+
+ else
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
+ fi
+
+ # PORTME: fill in a description of your system's C++ link characteristics
+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared
libraries])
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+ if test "$GXX" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to
+ # export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+ _LT_SYS_MODULE_PATH_AIX
+ _LT_TAGVAR(hardcode_libdir_flag_spec,
$1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname
$libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test
"x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" |
$Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R
$libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o
$output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"'
$compiler_flags ${wl}${allow_undefined_flag}
'"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX
+ _LT_TAGVAR(hardcode_libdir_flag_spec,
$1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared
+ # libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o
$output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags
${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS
$output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null;
then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <address@hidden> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname
${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q
$export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname
${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ freebsd[[12]]*)
+ # C++ shared libraries reported to be fairly broken before
+ # switch to ELF
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ freebsd-elf*)
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ ;;
+
+ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ gnu*)
+ ;;
+
+ hpux9*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b
${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib ||
mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v
conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z
in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; $ECHO "X$list" | $Xsed'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC
-shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test
$output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ hpux10*|hpux11*)
+ if test $with_gnu_ld = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+ esac
+ fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o
$lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname
${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname
${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v
conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z
in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; $ECHO "X$list" | $Xsed'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test $with_gnu_ld = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC
${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC
${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC
${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs
$compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2
\* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols
>$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs
$compiler_flags ${wl}-h,$soname
${wl}--retain-symbols-file,$output_objdir/$soname.expsym
${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+ CC*)
+ # SGI C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname
$soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed`
-update_registry ${output_objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib
$oldobjs'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version
${wl}$verstring" | $Xsed` ${wl}-update_registry
${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version
${wl}$verstring" | $Xsed` -o $lib'
+ fi
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+ esac
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ ;;
+
+ linux* | k*bsd*-gnu)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e
'\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e
"s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib
$lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext |
$SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED
-e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags --soname $soname -o \$templib
${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext
-o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext;
list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";;
*.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc* | ecpc* )
+ # Intel C++
+ with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o
$lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
$wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs
$deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"'
$libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname
${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec,
$1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+ *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
+ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs
$libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o |
$NL2SP`"'
+ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir
$oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name
\*.o | $NL2SP`~
+ $RANLIB $oldlib'
+ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir
$predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find
$tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname
${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir
$predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find
$tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname
${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ *) # Version 6 will use weak symbols
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath
${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for
conv in $convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"`
${wl}--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o
$lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v
conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e
"s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in
conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; $ECHO "X$list" | $Xsed'
+ ;;
+ xl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" >
$output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >>
$output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname
$wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}
-h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC
-G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(whole_archive_flag_spec,
$1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do
test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO
\"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+ output_verbose_link_cmd='echo'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ m88k*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib
$predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 |
$GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
+
+ *nto* | *qnx*)
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ openbsd2*)
+ # C++ shared libraries are fairly broken
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags
${wl}-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(whole_archive_flag_spec,
$1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=echo
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e
'\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e
"s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib
$lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ case $host in
+ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib
$oldobjs' ;;
+ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+ esac
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ cxx*)
+ case $host in
+ osf3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved
${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC
-shared${allow_undefined_flag} $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" &&
$ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry
${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath
${wl}$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC
-shared${allow_undefined_flag} $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" &&
$ECHO "X-set_version $verstring" | $Xsed` -update_registry
${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat
$export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input
${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" |
$Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+ $RM $lib.exp'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v
conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO
"X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in
$templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *)
list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved
${wl}\*'
+ case $host in
+ osf3*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO
"X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry
${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" &&
$ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry
${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath
${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext
2>&1 | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ psos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}
-h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" >
$lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local:
*; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o
$lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM
$lib.exp'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z
allextract$convenience -z defaultextract'
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+ output_verbose_link_cmd='echo'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib
$oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h
$wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" >
$lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local:
*; };" >> $lib.exp~
+ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v
conftest.$objext 2>&1 | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h
$wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" >
$lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local:
*; };" >> $lib.exp~
+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext
2>&1 | $GREP "\-L"'
+ fi
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z
${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* |
sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs
$deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G
${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs
$compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib
$libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared
${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs
$compiler_flags'
+ ;;
+ esac
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib
$libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G
${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs
$compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib
$libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared
${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs
$compiler_flags'
+ ;;
+ esac
+ ;;
+
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ vxworks*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+ _LT_TAGVAR(GCC, $1)="$GXX"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+ with_gnu_ld=$lt_save_with_gnu_ld
+ lt_cv_path_LDCXX=$lt_cv_path_LD
+ lt_cv_path_LD=$lt_save_path_LD
+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
# ---------------------------------
-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library. It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer*4 a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+ private int a;
+ public void bar (void) {
+ a = 0;
+ }
+};
+_LT_EOF
+])
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
-# old names
-AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
-# This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])
+ for p in `eval "$output_verbose_link_cmd"`; do
+ case $p in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test $p = "-L" ||
+ test $p = "-R"; then
+ prev=$p
+ continue
+ else
+ prev=
+ fi
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
- AC_SUBST(GCJFLAGS)
+ if test "$pre_test_object_deps_done" = no; then
+ case $p in
+ -L* | -R*)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(compiler_lib_search_path,
$1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+ _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ fi
+ fi
+ ;;
+
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+ _LT_TAGVAR(predep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+ fi
+ else
+ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+ _LT_TAGVAR(postdep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+ fi
+ fi
+ ;;
+
+ *) ;; # Ignore the rest.
+
+ esac
+ done
+
+ # Clean up.
+ rm -f a.out a.exe
+else
+ echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
+ # hack all around it, let's just trust "g++" to DTRT.
+ _LT_TAGVAR(predep_objects,$1)=
+ _LT_TAGVAR(postdep_objects,$1)=
+ _LT_TAGVAR(postdeps,$1)=
+ ;;
+
+linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+solaris*)
+ case $cc_basename in
+ CC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ # Adding this requires a known-good setup of shared libraries for
+ # Sun compiler versions before 5.6, else PIC objects from an old
+ # archive will be linked into the output, leading to subtle bugs.
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+esac
])
-AC_DEFUN([LT_AC_PROG_RC],
-[AC_CHECK_TOOL(RC, windres, no)
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo "
${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^
!!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+ [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+ [Dependencies to place before and after the objects being linked to
+ create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+ [The library search path used internally by the compiler when linking
+ a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_PROG_F77
+# ------------
+# Since AC_PROG_F77 is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_F77],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+AC_PROG_F77
+if test -z "$F77" || test "X$F77" = "Xno"; then
+ _lt_disable_F77=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_F77
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_F77], [])
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_REQUIRE([_LT_PROG_F77])dnl
+AC_LANG_PUSH(Fortran 77)
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ CC=${F77-"f77"}
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+ GCC=$G77
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ;
then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)="$G77"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
+fi # test "$_lt_disable_F77" != yes
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_PROG_FC
+# -----------
+# Since AC_PROG_FC is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_FC],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+AC_PROG_FC
+if test -z "$FC" || test "X$FC" = "Xno"; then
+ _lt_disable_FC=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_FC
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_FC], [])
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_REQUIRE([_LT_PROG_FC])dnl
+AC_LANG_PUSH(Fortran)
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ CC=${FC-"f95"}
+ compiler=$CC
+ GCC=$ac_cv_fc_compiler_gnu
+
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ;
then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void
main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC="$lt_save_CC"
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+ :
+ _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+ [AC_CHECK_TOOL(GCJ, gcj,)
+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ AC_SUBST(GCJFLAGS)])])[]dnl
])
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible. Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+ [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
############################################################
# NOTE: This macro has been submitted for inclusion into #
# GNU Autoconf as AC_PROG_SED. When it is available in #
# a released version of Autoconf we should remove this #
# macro and use it instead. #
############################################################
-# LT_AC_PROG_SED
-# --------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible. Prefer GNU sed if found.
-AC_DEFUN([LT_AC_PROG_SED],
+
+m4_defun([AC_PROG_SED],
[AC_MSG_CHECKING([for a sed that does not truncate output])
AC_CACHE_VAL(lt_cv_path_SED,
[# Loop through the user's path and test for sed and gsed.
@@ -5907,12 +7076,13 @@ do
done
done
done
+IFS=$as_save_IFS
lt_ac_max=0
lt_ac_count=0
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && break
+ test ! -f $lt_ac_sed && continue
cat /dev/null > conftest.in
lt_ac_count=0
echo $ECHO_N "0123456789$ECHO_C" >conftest.in
@@ -5937,7 +7107,270 @@ for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
fi
done
done
-SED=$lt_cv_path_SED
])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PROG_XSI_SHELLFNS
+# ---------------------
+# Bourne and XSI compatible variants of some useful shell functions.
+m4_defun([_LT_PROG_XSI_SHELLFNS],
+[case $xsi_shell in
+ yes)
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+}
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result="${1##*/}"
+}
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+ func_basename_result="${1##*/}"
+}
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary parameter first.
+ func_stripname_result=${3}
+ func_stripname_result=${func_stripname_result#"${1}"}
+ func_stripname_result=${func_stripname_result%"${2}"}
+}
+
+# func_opt_split
+func_opt_split ()
+{
+ func_opt_split_opt=${1%%=*}
+ func_opt_split_arg=${1#*=}
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+ case ${1} in
+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+ *) func_lo2o_result=${1} ;;
+ esac
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=${1%.*}.lo
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=$(( $[*] ))
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=${#1}
+}
+
+_LT_EOF
+ ;;
+ *) # Bourne compatible functions.
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+}
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+dnl func_dirname_and_basename
+dnl A portable version of this function is already defined in general.m4sh
+dnl so there is no need for it here.
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "X${3}" \
+ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "X${3}" \
+ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+ esac
+}
+
+# sed scripts:
+my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[[^=]]*=//'
+
+# func_opt_split
+func_opt_split ()
+{
+ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=`expr "address@hidden"`
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+}
+
+_LT_EOF
+esac
+
+case $lt_shell_append in
+ yes)
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "$[1]+=\$[2]"
+}
+_LT_EOF
+ ;;
+ *)
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "$[1]=\$$[1]\$[2]"
+}
+
+_LT_EOF
+ ;;
+ esac
])
diff --git a/myserver/m4/libxml.m4 b/myserver/m4/libxml.m4
deleted file mode 100644
index 68cd824..0000000
--- a/myserver/m4/libxml.m4
+++ /dev/null
@@ -1,188 +0,0 @@
-# Configure paths for LIBXML2
-# Mike Hommey 2004-06-19
-# use CPPFLAGS instead of CFLAGS
-# Toshio Kuratomi 2001-04-21
-# Adapted from:
-# Configure paths for GLIB
-# Owen Taylor 97-11-3
-
-dnl AM_PATH_XML2([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl Test for XML, and define XML_CPPFLAGS and XML_LIBS
-dnl
-AC_DEFUN([AM_PATH_XML2],[
-AC_ARG_WITH(xml-prefix,
- [ --with-xml-prefix=PFX Prefix where libxml is installed
(optional)],
- xml_config_prefix="$withval", xml_config_prefix="")
-AC_ARG_WITH(xml-exec-prefix,
- [ --with-xml-exec-prefix=PFX Exec prefix where libxml is
installed (optional)],
- xml_config_exec_prefix="$withval", xml_config_exec_prefix="")
-AC_ARG_ENABLE(xmltest,
- [ --disable-xmltest Do not try to compile and run a test
LIBXML program],,
- enable_xmltest=yes)
-
- if test x$xml_config_exec_prefix != x ; then
- xml_config_args="$xml_config_args"
- if test x${XML2_CONFIG+set} != xset ; then
- XML2_CONFIG=$xml_config_exec_prefix/bin/xml2-config
- fi
- fi
- if test x$xml_config_prefix != x ; then
- xml_config_args="$xml_config_args --prefix=$xml_config_prefix"
- if test x${XML2_CONFIG+set} != xset ; then
- XML2_CONFIG=$xml_config_prefix/bin/xml2-config
- fi
- fi
-
- AC_PATH_PROG(XML2_CONFIG, xml2-config, no)
- min_xml_version=ifelse([$1], ,2.0.0,[$1])
- AC_MSG_CHECKING(for libxml - version >= $min_xml_version)
- no_xml=""
- if test "$XML2_CONFIG" = "no" ; then
- no_xml=yes
- else
- XML_CPPFLAGS=`$XML2_CONFIG $xml_config_args --cflags`
- XML_LIBS=`$XML2_CONFIG $xml_config_args --libs`
- xml_config_major_version=`$XML2_CONFIG $xml_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- xml_config_minor_version=`$XML2_CONFIG $xml_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- xml_config_micro_version=`$XML2_CONFIG $xml_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
- if test "x$enable_xmltest" = "xyes" ; then
- ac_save_CPPFLAGS="$CPPFLAGS"
- ac_save_LIBS="$LIBS"
- CPPFLAGS="$CPPFLAGS $XML_CPPFLAGS"
- LIBS="$XML_LIBS $LIBS"
-dnl
-dnl Now check if the installed libxml is sufficiently new.
-dnl (Also sanity checks the results of xml2-config to some extent)
-dnl
- rm -f conf.xmltest
- AC_TRY_RUN([
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <libxml/xmlversion.h>
-
-int
-main()
-{
- int xml_major_version, xml_minor_version, xml_micro_version;
- int major, minor, micro;
- char *tmp_version;
-
- system("touch conf.xmltest");
-
- /* Capture xml2-config output via autoconf/configure variables */
- /* HP/UX 9 (address@hidden) writes to sscanf strings */
- tmp_version = (char *)strdup("$min_xml_version");
- if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
- printf("%s, bad version string from xml2-config\n", "$min_xml_version");
- exit(1);
- }
- free(tmp_version);
-
- /* Capture the version information from the header files */
- tmp_version = (char *)strdup(LIBXML_DOTTED_VERSION);
- if (sscanf(tmp_version, "%d.%d.%d", &xml_major_version, &xml_minor_version,
&xml_micro_version) != 3) {
- printf("%s, bad version string from libxml includes\n",
"LIBXML_DOTTED_VERSION");
- exit(1);
- }
- free(tmp_version);
-
- /* Compare xml2-config output to the libxml headers */
- if ((xml_major_version != $xml_config_major_version) ||
- (xml_minor_version != $xml_config_minor_version) ||
- (xml_micro_version != $xml_config_micro_version))
- {
- printf("*** libxml header files (version %d.%d.%d) do not match\n",
- xml_major_version, xml_minor_version, xml_micro_version);
- printf("*** xml2-config (version %d.%d.%d)\n",
- $xml_config_major_version, $xml_config_minor_version,
$xml_config_micro_version);
- return 1;
- }
-/* Compare the headers to the library to make sure we match */
- /* Less than ideal -- doesn't provide us with return value feedback,
- * only exits if there's a serious mismatch between header and library.
- */
- LIBXML_TEST_VERSION;
-
- /* Test that the library is greater than our minimum version */
- if ((xml_major_version > major) ||
- ((xml_major_version == major) && (xml_minor_version > minor)) ||
- ((xml_major_version == major) && (xml_minor_version == minor) &&
- (xml_micro_version >= micro)))
- {
- return 0;
- }
- else
- {
- printf("\n*** An old version of libxml (%d.%d.%d) was found.\n",
- xml_major_version, xml_minor_version, xml_micro_version);
- printf("*** You need a version of libxml newer than %d.%d.%d. The
latest version of\n",
- major, minor, micro);
- printf("*** libxml is always available from ftp://ftp.xmlsoft.org.\n";);
- printf("***\n");
- printf("*** If you have already installed a sufficiently new version,
this error\n");
- printf("*** probably means that the wrong copy of the xml2-config
shell script is\n");
- printf("*** being found. The easiest way to fix this is to remove the
old version\n");
- printf("*** of LIBXML, but you can also set the XML2_CONFIG
environment to point to the\n");
- printf("*** correct copy of xml2-config. (In this case, you will have
to\n");
- printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit
/etc/ld.so.conf\n");
- printf("*** so that the correct libraries are found at run-time))\n");
- }
- return 1;
-}
-],, no_xml=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
- CPPFLAGS="$ac_save_CPPFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
-
- if test "x$no_xml" = x ; then
- AC_MSG_RESULT(yes (version
$xml_config_major_version.$xml_config_minor_version.$xml_config_micro_version))
- ifelse([$2], , :, [$2])
- else
- AC_MSG_RESULT(no)
- if test "$XML2_CONFIG" = "no" ; then
- echo "*** The xml2-config script installed by LIBXML could not be found"
- echo "*** If libxml was installed in PREFIX, make sure PREFIX/bin is in"
- echo "*** your path, or set the XML2_CONFIG environment variable to the"
- echo "*** full path to xml2-config."
- else
- if test -f conf.xmltest ; then
- :
- else
- echo "*** Could not run libxml test program, checking why..."
- CPPFLAGS="$CPPFLAGS $XML_CPPFLAGS"
- LIBS="$LIBS $XML_LIBS"
- AC_TRY_LINK([
-#include <libxml/xmlversion.h>
-#include <stdio.h>
-], [ LIBXML_TEST_VERSION; return 0;],
- [ echo "*** The test program compiled, but did not run. This usually
means"
- echo "*** that the run-time linker is not finding LIBXML or finding
the wrong"
- echo "*** version of LIBXML. If it is not finding LIBXML, you'll
need to set your"
- echo "*** LD_LIBRARY_PATH environment variable, or edit
/etc/ld.so.conf to point"
- echo "*** to the installed location Also, make sure you have run
ldconfig if that"
- echo "*** is required on your system"
- echo "***"
- echo "*** If you have an old version installed, it is best to remove
it, although"
- echo "*** you may also be able to get things to work by modifying
LD_LIBRARY_PATH" ],
- [ echo "*** The test program failed to compile or link. See the file
config.log for the"
- echo "*** exact error that occured. This usually means LIBXML was
incorrectly installed"
- echo "*** or that you have moved LIBXML since it was installed. In
the latter case, you"
- echo "*** may want to edit the xml2-config script: $XML2_CONFIG" ])
- CPPFLAGS="$ac_save_CPPFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
-
- XML_CPPFLAGS=""
- XML_LIBS=""
- ifelse([$3], , :, [$3])
- fi
- AC_SUBST(XML_CPPFLAGS)
- AC_SUBST(XML_LIBS)
- rm -f conf.xmltest
-])
diff --git a/myserver/m4/progtest.m4 b/myserver/m4/progtest.m4
deleted file mode 100644
index a56365c..0000000
--- a/myserver/m4/progtest.m4
+++ /dev/null
@@ -1,92 +0,0 @@
-# progtest.m4 serial 4 (gettext-0.14.2)
-dnl Copyright (C) 1996-2003, 2005 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <address@hidden>, 1996.
-
-AC_PREREQ(2.50)
-
-# Search path for a program which passes the given test.
-
-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN([AM_PATH_PROG_WITH_TEST],
-[
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL(ac_cv_path_$1,
-[case "[$]$1" in
- [[\\/]]* | ?:[[\\/]]*)
- ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in ifelse([$5], , $PATH, [$5]); do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD
- if [$3]; then
- ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
- ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
- AC_MSG_RESULT([$]$1)
-else
- AC_MSG_RESULT(no)
-fi
-AC_SUBST($1)dnl
-])
diff --git a/myserver/missing b/myserver/missing
deleted file mode 100755
index 1c8ff70..0000000
--- a/myserver/missing
+++ /dev/null
@@ -1,367 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2006-05-10.23
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <address@hidden>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- # Exit code 63 means version mismatch. This often happens
- # when the user try to use an ancient version of a tool on
- # a file that requires a minimum version. In this case we
- # we should proceed has if the program had been absent, or
- # if --run hadn't been passed.
- if test $? = 63; then
- run=:
- msg="probably too old"
- fi
- ;;
-
- -h|--h|--he|--hel|--help)
- echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
- -h, --help display this help and exit
- -v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
- aclocal touch file \`aclocal.m4'
- autoconf touch file \`configure'
- autoheader touch file \`config.h.in'
- autom4te touch the output file, or create a stub one
- automake touch all \`Makefile.in' files
- bison create \`y.tab.[ch]', if possible, from existing .[ch]
- flex create \`lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create \`lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- tar try tar, gnutar, gtar, then tar without non-portable flags
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Send bug reports to <address@hidden>."
- exit $?
- ;;
-
- -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing $scriptversion (GNU Automake)"
- exit $?
- ;;
-
- -*)
- echo 1>&2 "$0: Unknown \`$1' option"
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
- ;;
-
-esac
-
-# Now exit if we have it, but it failed. Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).
-case $1 in
- lex|yacc)
- # Not GNU programs, they don't have --version.
- ;;
-
- tar)
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- exit 1
- fi
- ;;
-
- *)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- # Could not run --version or --help. This is probably someone
- # running `$TOOL --version' or `$TOOL --help' to check whether
- # $TOOL exists and not knowing $TOOL uses missing.
- exit 1
- fi
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $1 in
- aclocal*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p'
${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case $f in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te)
- echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
- You might have modified some files without having the
- proper tools for further handling them.
- You can get \`$1' as part of \`Autoconf' from any GNU
- archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison|yacc)
- echo 1>&2 "\
-WARNING: \`$1' $msg. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
- in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
- eval LASTARG="\${$#}"
- case $LASTARG in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if test ! -f y.tab.h; then
- echo >y.tab.h
- fi
- if test ! -f y.tab.c; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex|flex)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
- in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
- rm -f lex.yy.c
- if test $# -ne 1; then
- eval LASTARG="\${$#}"
- case $LASTARG in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if test ! -f lex.yy.c; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit 1
- fi
- ;;
-
- makeinfo)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy \`make' (AIX,
- DU, IRIX). You might want to install the \`Texinfo' package or
- the \`GNU make' package. Grab either from any GNU archive site."
- # The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -z "$file"; then
- # ... or it is the one specified with @setfilename ...
- infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /address@hidden/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
- # ... or it is derived from the source name (dir/f.texi becomes f.info)
- test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
- fi
- # If the file does not exist, the user really needs makeinfo;
- # let's fail without touching anything.
- test -f $file || exit 1
- touch $file
- ;;
-
- tar)
- shift
-
- # We have already tried tar in the generic part.
- # Look for gnutar/gtar before invocation to avoid ugly error
- # messages.
- if (gnutar --version > /dev/null 2>&1); then
- gnutar "$@" && exit 0
- fi
- if (gtar --version > /dev/null 2>&1); then
- gtar "$@" && exit 0
- fi
- firstarg="$1"
- if shift; then
- case $firstarg in
- *o*)
- firstarg=`echo "$firstarg" | sed s/o//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- case $firstarg in
- *h*)
- firstarg=`echo "$firstarg" | sed s/h//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- fi
-
- echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
- You may want to install GNU tar or Free paxutils, or check the
- command line arguments."
- exit 1
- ;;
-
- *)
- echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
- You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
diff --git a/myserver/src/Makefile.am b/myserver/src/Makefile.am
index c12a693..d130cd5 100644
--- a/myserver/src/Makefile.am
+++ b/myserver/src/Makefile.am
@@ -1,7 +1,7 @@
# Makefile for MyServer (./src)
SUBDIRS = base conf connection connections_scheduler filter http_handler \
log plugin protocol server
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
bin_PROGRAMS = myserver
myserver_SOURCES = myserver.cpp
myserver_CXXFLAGS = $(CXXFLAGS) $(XML_CFLAGS) -DHOST_STR=\"$(build)\"
-DPREFIX=\"$(prefix)\"
diff --git a/myserver/src/base/Makefile.am b/myserver/src/base/Makefile.am
index aa8e6f4..7e6f1df 100644
--- a/myserver/src/base/Makefile.am
+++ b/myserver/src/base/Makefile.am
@@ -1,7 +1,7 @@
lib_LIBRARIES = libbase.a
libbase_a_SOURCES = utility.cpp
SUBDIRS = base64 bitvec dynamic_lib file files_cache find_data hash_map
home_dir md5 mem_buff multicast pipe process regex safetime slab socket
socket_pair ssl string sync thread xml unix_socket
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
install:
# Do not do anything.
diff --git a/myserver/src/base/base64/Makefile.am
b/myserver/src/base/base64/Makefile.am
index 143cdcf..27f66c7 100644
--- a/myserver/src/base/base64/Makefile.am
+++ b/myserver/src/base/base64/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libbase64.a
libbase64_a_SOURCES = mime_utils.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/bitvec/Makefile.am
b/myserver/src/base/bitvec/Makefile.am
index 1475674..09724ff 100644
--- a/myserver/src/base/bitvec/Makefile.am
+++ b/myserver/src/base/bitvec/Makefile.am
@@ -1,4 +1,4 @@
lib_LIBRARIES = libbitvec.a
libbitvec_a_SOURCES = bitvec.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/dynamic_lib/Makefile.am
b/myserver/src/base/dynamic_lib/Makefile.am
index 9d21ff9..3820ed3 100644
--- a/myserver/src/base/dynamic_lib/Makefile.am
+++ b/myserver/src/base/dynamic_lib/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libdynamic_lib.a
libdynamic_lib_a_SOURCES = dynamiclib.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/file/Makefile.am
b/myserver/src/base/file/Makefile.am
index c8f5f06..5128274 100644
--- a/myserver/src/base/file/Makefile.am
+++ b/myserver/src/base/file/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libfile.a
libfile_a_SOURCES = file.cpp files_utility.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/files_cache/Makefile.am
b/myserver/src/base/files_cache/Makefile.am
index 108995e..0e78be2 100644
--- a/myserver/src/base/files_cache/Makefile.am
+++ b/myserver/src/base/files_cache/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libfiles_cache.a
libfiles_cache_a_SOURCES = cached_file_buffer.cpp cached_file.cpp
cached_file_factory.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/find_data/Makefile.am
b/myserver/src/base/find_data/Makefile.am
index 10ef03c..1e44764 100644
--- a/myserver/src/base/find_data/Makefile.am
+++ b/myserver/src/base/find_data/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libfind_data.a
libfind_data_a_SOURCES = find_data.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/hash_map/Makefile.am
b/myserver/src/base/hash_map/Makefile.am
index 5675a35..57daef1 100644
--- a/myserver/src/base/hash_map/Makefile.am
+++ b/myserver/src/base/hash_map/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libhash_map.a
libhash_map_a_SOURCES = hash_map.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/home_dir/Makefile.am
b/myserver/src/base/home_dir/Makefile.am
index cfa3bcb..5a5f4be 100644
--- a/myserver/src/base/home_dir/Makefile.am
+++ b/myserver/src/base/home_dir/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libhome_dir.a
libhome_dir_a_SOURCES = home_dir.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/md5/Makefile.am
b/myserver/src/base/md5/Makefile.am
index 6850212..ac10bc8 100644
--- a/myserver/src/base/md5/Makefile.am
+++ b/myserver/src/base/md5/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libmd5.a
libmd5_a_SOURCES = md5.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/mem_buff/Makefile.am
b/myserver/src/base/mem_buff/Makefile.am
index 6e400fa..a33e97e 100644
--- a/myserver/src/base/mem_buff/Makefile.am
+++ b/myserver/src/base/mem_buff/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libmem_buff.a
libmem_buff_a_SOURCES = mem_buff.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/multicast/Makefile.am
b/myserver/src/base/multicast/Makefile.am
index ad0e06e..f6e3bd8 100644
--- a/myserver/src/base/multicast/Makefile.am
+++ b/myserver/src/base/multicast/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libmulticast.a
libmulticast_a_SOURCES = multicast.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/pipe/Makefile.am
b/myserver/src/base/pipe/Makefile.am
index ac85046..74a5394 100644
--- a/myserver/src/base/pipe/Makefile.am
+++ b/myserver/src/base/pipe/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libpipe.a
libpipe_a_SOURCES = pipe.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/process/Makefile.am
b/myserver/src/base/process/Makefile.am
index 4b04628..72f1ad2 100644
--- a/myserver/src/base/process/Makefile.am
+++ b/myserver/src/base/process/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libprocess.a
libprocess_a_SOURCES = fork_server.cpp process.cpp process_server_manager.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/regex/Makefile.am
b/myserver/src/base/regex/Makefile.am
index 3d962f2..2c5a53b 100644
--- a/myserver/src/base/regex/Makefile.am
+++ b/myserver/src/base/regex/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libregex.a
libregex_a_SOURCES = myserver_regex.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/safetime/Makefile.am
b/myserver/src/base/safetime/Makefile.am
index 7a4dce4..023c390 100644
--- a/myserver/src/base/safetime/Makefile.am
+++ b/myserver/src/base/safetime/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libsafetime.a
libsafetime_a_SOURCES = safetime.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/slab/Makefile.am
b/myserver/src/base/slab/Makefile.am
index d8df8f4..d6129fa 100644
--- a/myserver/src/base/slab/Makefile.am
+++ b/myserver/src/base/slab/Makefile.am
@@ -1,4 +1,4 @@
lib_LIBRARIES = libslab.a
libslab_a_SOURCES = slab.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/socket/Makefile.am
b/myserver/src/base/socket/Makefile.am
index d8fd8ad..cddd4d7 100644
--- a/myserver/src/base/socket/Makefile.am
+++ b/myserver/src/base/socket/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libsocket.a
libsocket_a_SOURCES = socket.cpp ssl_socket.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/socket_pair/Makefile.am
b/myserver/src/base/socket_pair/Makefile.am
index 0f38c23..30c3ec8 100644
--- a/myserver/src/base/socket_pair/Makefile.am
+++ b/myserver/src/base/socket_pair/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libsocket_pair.a
libsocket_pair_a_SOURCES = socket_pair.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/ssl/Makefile.am
b/myserver/src/base/ssl/Makefile.am
index 31aa370..da79543 100644
--- a/myserver/src/base/ssl/Makefile.am
+++ b/myserver/src/base/ssl/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libssl.a
libssl_a_SOURCES = ssl.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/string/Makefile.am
b/myserver/src/base/string/Makefile.am
index 2edd1d4..665bb06 100644
--- a/myserver/src/base/string/Makefile.am
+++ b/myserver/src/base/string/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libstring.a
libstring_a_SOURCES = securestr.cpp stringutils.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/sync/Makefile.am
b/myserver/src/base/sync/Makefile.am
index a93e94d..d3bc558 100644
--- a/myserver/src/base/sync/Makefile.am
+++ b/myserver/src/base/sync/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libsync.a
libsync_a_SOURCES = event.cpp mutex.cpp read_write_lock.cpp
recursive_mutex.cpp semaphore.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/thread/Makefile.am
b/myserver/src/base/thread/Makefile.am
index 02f0130..44a7710 100644
--- a/myserver/src/base/thread/Makefile.am
+++ b/myserver/src/base/thread/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libthread.a
libthread_a_SOURCES = thread.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/unix_socket/Makefile.am
b/myserver/src/base/unix_socket/Makefile.am
index b0d6fc4..7aaed0d 100644
--- a/myserver/src/base/unix_socket/Makefile.am
+++ b/myserver/src/base/unix_socket/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libunix_socket.a
libunix_socket_a_SOURCES = unix_socket.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/base/xml/Makefile.am
b/myserver/src/base/xml/Makefile.am
index 446cf6e..05aea1d 100644
--- a/myserver/src/base/xml/Makefile.am
+++ b/myserver/src/base/xml/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libxml.a
libxml_a_SOURCES = xml_parser.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/conf/Makefile.am b/myserver/src/conf/Makefile.am
index daf1b1e..00cd655 100644
--- a/myserver/src/conf/Makefile.am
+++ b/myserver/src/conf/Makefile.am
@@ -1,7 +1,7 @@
lib_LIBRARIES = libconf.a
libconf_a_SOURCES = nodetree.cpp xml_conf.cpp
SUBDIRS = mime security vhost
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
install:
# Do not do anything.
diff --git a/myserver/src/conf/mime/Makefile.am
b/myserver/src/conf/mime/Makefile.am
index 6dc4baf..a05690f 100644
--- a/myserver/src/conf/mime/Makefile.am
+++ b/myserver/src/conf/mime/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libmime.a
libmime_a_SOURCES = mime_manager.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/conf/security/Makefile.am
b/myserver/src/conf/security/Makefile.am
index 935b9ee..ade38ec 100644
--- a/myserver/src/conf/security/Makefile.am
+++ b/myserver/src/conf/security/Makefile.am
@@ -1,4 +1,4 @@
lib_LIBRARIES = libsecurity.a
libsecurity_a_SOURCES = auth_domain.cpp auth_method.cpp
auth_method_factory.cpp security_cache.cpp security_domain.cpp
security_manager.cpp security_token.cpp validator.cpp validator_factory.cpp
xml_validator.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/conf/vhost/Makefile.am
b/myserver/src/conf/vhost/Makefile.am
index 500358d..eae6e17 100644
--- a/myserver/src/conf/vhost/Makefile.am
+++ b/myserver/src/conf/vhost/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libvhost.a
libvhost_a_SOURCES = vhost.cpp vhost_manager.cpp ip.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/connection/Makefile.am
b/myserver/src/connection/Makefile.am
index 62368ae..41c9695 100644
--- a/myserver/src/connection/Makefile.am
+++ b/myserver/src/connection/Makefile.am
@@ -1,7 +1,7 @@
lib_LIBRARIES = libconnection.a
libconnection_a_SOURCES = connection.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
install:
# Do not do anything.
diff --git a/myserver/src/connections_scheduler/Makefile.am
b/myserver/src/connections_scheduler/Makefile.am
index 5fde48a..ebcdf2e 100644
--- a/myserver/src/connections_scheduler/Makefile.am
+++ b/myserver/src/connections_scheduler/Makefile.am
@@ -1,7 +1,7 @@
lib_LIBRARIES = libconnections_scheduler.a
libconnections_scheduler_a_SOURCES = connections_scheduler.cpp
listen_threads.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
install:
# Do not do anything.
diff --git a/myserver/src/filter/Makefile.am b/myserver/src/filter/Makefile.am
index f877709..fdc8b39 100644
--- a/myserver/src/filter/Makefile.am
+++ b/myserver/src/filter/Makefile.am
@@ -2,7 +2,7 @@ lib_LIBRARIES = libfilter.a
libfilter_a_SOURCES = filter.cpp filters_chain.cpp filters_factory.cpp
memory_stream.cpp stream.cpp \
console.cpp
SUBDIRS = gzip
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
install:
# Do not do anything.
diff --git a/myserver/src/filter/gzip/Makefile.am
b/myserver/src/filter/gzip/Makefile.am
index ab72823..8a6f8a7 100644
--- a/myserver/src/filter/gzip/Makefile.am
+++ b/myserver/src/filter/gzip/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libgzip.a
libgzip_a_SOURCES = gzip.cpp gzip_decompress.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/http_handler/Makefile.am
b/myserver/src/http_handler/Makefile.am
index 88924f6..768d3ae 100644
--- a/myserver/src/http_handler/Makefile.am
+++ b/myserver/src/http_handler/Makefile.am
@@ -1,7 +1,7 @@
lib_LIBRARIES = libhttp_handler.a
libhttp_handler_a_SOURCES =
SUBDIRS = cgi fastcgi http_dir http_file isapi mscgi proxy scgi wincgi
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
install:
# Do not do anything.
diff --git a/myserver/src/http_handler/cgi/Makefile.am
b/myserver/src/http_handler/cgi/Makefile.am
index bfdca15..29f3ce9 100644
--- a/myserver/src/http_handler/cgi/Makefile.am
+++ b/myserver/src/http_handler/cgi/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libcgi.a
libcgi_a_SOURCES = cgi.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/http_handler/fastcgi/Makefile.am
b/myserver/src/http_handler/fastcgi/Makefile.am
index 1abe196..9050525 100644
--- a/myserver/src/http_handler/fastcgi/Makefile.am
+++ b/myserver/src/http_handler/fastcgi/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libfastcgi.a
libfastcgi_a_SOURCES = fastcgi.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/http_handler/http_dir/Makefile.am
b/myserver/src/http_handler/http_dir/Makefile.am
index 29be925..1847a1a 100644
--- a/myserver/src/http_handler/http_dir/Makefile.am
+++ b/myserver/src/http_handler/http_dir/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libhttp_dir.a
libhttp_dir_a_SOURCES = http_dir.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/http_handler/http_file/Makefile.am
b/myserver/src/http_handler/http_file/Makefile.am
index bdd220f..faa8264 100644
--- a/myserver/src/http_handler/http_file/Makefile.am
+++ b/myserver/src/http_handler/http_file/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libhttp_file.a
libhttp_file_a_SOURCES = http_file.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/http_handler/isapi/Makefile.am
b/myserver/src/http_handler/isapi/Makefile.am
index 182b265..44e5b1c 100644
--- a/myserver/src/http_handler/isapi/Makefile.am
+++ b/myserver/src/http_handler/isapi/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libisapi.a
libisapi_a_SOURCES = isapi.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/http_handler/mscgi/Makefile.am
b/myserver/src/http_handler/mscgi/Makefile.am
index 11754cb..30ba86f 100644
--- a/myserver/src/http_handler/mscgi/Makefile.am
+++ b/myserver/src/http_handler/mscgi/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libmscgi.a
libmscgi_a_SOURCES = mscgi.cpp mscgi_manager.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/http_handler/proxy/Makefile.am
b/myserver/src/http_handler/proxy/Makefile.am
index 0988911..c36f808 100644
--- a/myserver/src/http_handler/proxy/Makefile.am
+++ b/myserver/src/http_handler/proxy/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libproxy.a
libproxy_a_SOURCES = proxy.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/http_handler/scgi/Makefile.am
b/myserver/src/http_handler/scgi/Makefile.am
index 5837f96..667faf5 100644
--- a/myserver/src/http_handler/scgi/Makefile.am
+++ b/myserver/src/http_handler/scgi/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libscgi.a
libscgi_a_SOURCES = scgi.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/http_handler/wincgi/Makefile.am
b/myserver/src/http_handler/wincgi/Makefile.am
index 4d9e0c7..ae01189 100644
--- a/myserver/src/http_handler/wincgi/Makefile.am
+++ b/myserver/src/http_handler/wincgi/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libwincgi.a
libwincgi_a_SOURCES = wincgi.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/log/Makefile.am b/myserver/src/log/Makefile.am
index d151f4b..62c95d1 100644
--- a/myserver/src/log/Makefile.am
+++ b/myserver/src/log/Makefile.am
@@ -1,7 +1,7 @@
lib_LIBRARIES = liblog.a
liblog_a_SOURCES = log_manager.cpp
SUBDIRS = stream
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
install:
# Do not do anything.
diff --git a/myserver/src/plugin/Makefile.am b/myserver/src/plugin/Makefile.am
index b14f28b..7638bc5 100644
--- a/myserver/src/plugin/Makefile.am
+++ b/myserver/src/plugin/Makefile.am
@@ -1,6 +1,6 @@
lib_LIBRARIES = libplugin.a
libplugin_a_SOURCES = plugin.cpp plugin_info.cpp plugins_manager.cpp
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
install:
# Do not do anything.
diff --git a/myserver/src/protocol/Makefile.am
b/myserver/src/protocol/Makefile.am
index 6ff0348..c6faa03 100644
--- a/myserver/src/protocol/Makefile.am
+++ b/myserver/src/protocol/Makefile.am
@@ -1,7 +1,7 @@
lib_LIBRARIES = libprotocol.a
libprotocol_a_SOURCES = protocol_buffer.cpp protocol.cpp protocols_manager.cpp
url.cpp
SUBDIRS = control ftp http https
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
install:
# Do not do anything.
diff --git a/myserver/src/protocol/control/Makefile.am
b/myserver/src/protocol/control/Makefile.am
index 730e575..aae9807 100644
--- a/myserver/src/protocol/control/Makefile.am
+++ b/myserver/src/protocol/control/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libcontrol.a
libcontrol_a_SOURCES = control_header.cpp control_protocol.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/protocol/ftp/Makefile.am
b/myserver/src/protocol/ftp/Makefile.am
index 0f473d0..bb36ba7 100644
--- a/myserver/src/protocol/ftp/Makefile.am
+++ b/myserver/src/protocol/ftp/Makefile.am
@@ -1,7 +1,7 @@
lib_LIBRARIES = libftp.a
libftp_a_SOURCES = ftp.cpp ftp_lexer.cpp ftp_parser.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
build_parser: ftp_lexer.lpp ftp_parser.ypp
$(YACC) $(YFLAGS) --defines=../../../include/protocol/ftp/ftp_parser.h \
diff --git a/myserver/src/protocol/http/Makefile.am
b/myserver/src/protocol/http/Makefile.am
index 41a3c10..98b480d 100644
--- a/myserver/src/protocol/http/Makefile.am
+++ b/myserver/src/protocol/http/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libhttp.a
libhttp_a_SOURCES = http.cpp http_data_handler.cpp http_data_read.cpp
http_errors.cpp http_headers.cpp http_request.cpp http_req_security_domain.cpp
http_response.cpp http_thread_context.cpp dyn_http_manager.cpp
dyn_http_manager_list.cpp dyn_http_command.cpp dyn_http_command_manager.cpp
SUBDIRS = env
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/protocol/http/env/Makefile.am
b/myserver/src/protocol/http/env/Makefile.am
index db91f24..c8a1d92 100644
--- a/myserver/src/protocol/http/env/Makefile.am
+++ b/myserver/src/protocol/http/env/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libenv.a
libenv_a_SOURCES = env.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/protocol/https/Makefile.am
b/myserver/src/protocol/https/Makefile.am
index 0930872..9e05691 100644
--- a/myserver/src/protocol/https/Makefile.am
+++ b/myserver/src/protocol/https/Makefile.am
@@ -1,5 +1,5 @@
lib_LIBRARIES = libhttps.a
libhttps_a_SOURCES = https.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
diff --git a/myserver/src/server/Makefile.am b/myserver/src/server/Makefile.am
index fba8cf5..d74c9c6 100644
--- a/myserver/src/server/Makefile.am
+++ b/myserver/src/server/Makefile.am
@@ -1,7 +1,7 @@
lib_LIBRARIES = libserver.a
libserver_a_SOURCES = clients_thread.cpp server.cpp
SUBDIRS =
-INCLUDES = $(all_includes)
+AM_CPPFLAGS = $(all_includes)
install:
# Do not do anything.
commit f42d766aca5c956573d6b9ec186e0bf4b6ef8d24
Author: Giuseppe Scrivano <address@hidden>
Date: Fri Aug 21 14:46:07 2009 +0200
Added missing files ABOUT-NLS and config.rpath
diff --git a/myserver/ABOUT-NLS b/myserver/ABOUT-NLS
new file mode 100644
index 0000000..83bc72e
--- /dev/null
+++ b/myserver/ABOUT-NLS
@@ -0,0 +1,1068 @@
+1 Notes on the Free Translation Project
+***************************************
+
+Free software is going international! The Free Translation Project is
+a way to get maintainers of free software, translators, and users all
+together, so that free software will gradually become able to speak many
+languages. A few packages already provide translations for their
+messages.
+
+ If you found this `ABOUT-NLS' file inside a distribution, you may
+assume that the distributed package does use GNU `gettext' internally,
+itself available at your nearest GNU archive site. But you do _not_
+need to install GNU `gettext' prior to configuring, installing or using
+this package with messages translated.
+
+ Installers will find here some useful hints. These notes also
+explain how users should proceed for getting the programs to use the
+available translations. They tell how people wanting to contribute and
+work on translations can contact the appropriate team.
+
+ When reporting bugs in the `intl/' directory or bugs which may be
+related to internationalization, you should tell about the version of
+`gettext' which is used. The information can be found in the
+`intl/VERSION' file, in internationalized packages.
+
+1.1 Quick configuration advice
+==============================
+
+If you want to exploit the full power of internationalization, you
+should configure it using
+
+ ./configure --with-included-gettext
+
+to force usage of internationalizing routines provided within this
+package, despite the existence of internationalizing capabilities in the
+operating system where this package is being installed. So far, only
+the `gettext' implementation in the GNU C library version 2 provides as
+many features (such as locale alias, message inheritance, automatic
+charset conversion or plural form handling) as the implementation here.
+It is also not possible to offer this additional functionality on top
+of a `catgets' implementation. Future versions of GNU `gettext' will
+very likely convey even more functionality. So it might be a good idea
+to change to GNU `gettext' as soon as possible.
+
+ So you need _not_ provide this option if you are using GNU libc 2 or
+you have installed a recent copy of the GNU gettext package with the
+included `libintl'.
+
+1.2 INSTALL Matters
+===================
+
+Some packages are "localizable" when properly installed; the programs
+they contain can be made to speak your own native language. Most such
+packages use GNU `gettext'. Other packages have their own ways to
+internationalization, predating GNU `gettext'.
+
+ By default, this package will be installed to allow translation of
+messages. It will automatically detect whether the system already
+provides the GNU `gettext' functions. If not, the included GNU
+`gettext' library will be used. This library is wholly contained
+within this package, usually in the `intl/' subdirectory, so prior
+installation of the GNU `gettext' package is _not_ required.
+Installers may use special options at configuration time for changing
+the default behaviour. The commands:
+
+ ./configure --with-included-gettext
+ ./configure --disable-nls
+
+will, respectively, bypass any pre-existing `gettext' to use the
+internationalizing routines provided within this package, or else,
+_totally_ disable translation of messages.
+
+ When you already have GNU `gettext' installed on your system and run
+configure without an option for your new package, `configure' will
+probably detect the previously built and installed `libintl.a' file and
+will decide to use this. This might not be desirable. You should use
+the more recent version of the GNU `gettext' library. I.e. if the file
+`intl/VERSION' shows that the library which comes with this package is
+more recent, you should use
+
+ ./configure --with-included-gettext
+
+to prevent auto-detection.
+
+ The configuration process will not test for the `catgets' function
+and therefore it will not be used. The reason is that even an
+emulation of `gettext' on top of `catgets' could not provide all the
+extensions of the GNU `gettext' library.
+
+ Internationalized packages usually have many `po/LL.po' files, where
+LL gives an ISO 639 two-letter code identifying the language. Unless
+translations have been forbidden at `configure' time by using the
+`--disable-nls' switch, all available translations are installed
+together with the package. However, the environment variable `LINGUAS'
+may be set, prior to configuration, to limit the installed set.
+`LINGUAS' should then contain a space separated list of two-letter
+codes, stating which languages are allowed.
+
+1.3 Using This Package
+======================
+
+As a user, if your language has been installed for this package, you
+only have to set the `LANG' environment variable to the appropriate
+`LL_CC' combination. If you happen to have the `LC_ALL' or some other
+`LC_xxx' environment variables set, you should unset them before
+setting `LANG', otherwise the setting of `LANG' will not have the
+desired effect. Here `LL' is an ISO 639 two-letter language code, and
+`CC' is an ISO 3166 two-letter country code. For example, let's
+suppose that you speak German and live in Germany. At the shell
+prompt, merely execute `setenv LANG de_DE' (in `csh'),
+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
+This can be done from your `.login' or `.profile' file, once and for
+all.
+
+ You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries. For
+example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The
+country code serves to distinguish the dialects.
+
+ The locale naming convention of `LL_CC', with `LL' denoting the
+language and `CC' denoting the country, is the one use on systems based
+on GNU libc. On other systems, some variations of this scheme are
+used, such as `LL' or `LL_CC.ENCODING'. You can get the list of
+locales supported by your system for your language by running the
+command `locale -a | grep '^LL''.
+
+ Not all programs have translations for all languages. By default, an
+English message is shown in place of a nonexistent translation. If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG'
+for the purpose of message handling, but you still need to have `LANG'
+set to the primary language; this is required by other parts of the
+system libraries. For example, some Swedish users who would rather
+read translations in German than English for when Swedish is not
+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+
+ Special advice for Norwegian users: The language code for Norwegian
+bokma*l changed from `no' to `nb' recently (in 2003). During the
+transition period, while some message catalogs for this language are
+installed under `nb' and some older ones under `no', it's recommended
+for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
+older translations are used.
+
+ In the `LANGUAGE' environment variable, but not in the `LANG'
+environment variable, `LL_CC' combinations can be abbreviated as `LL'
+to denote the language's main dialect. For example, `de' is equivalent
+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
+(Portuguese as spoken in Portugal) in this context.
+
+1.4 Translating Teams
+=====================
+
+For the Free Translation Project to be a success, we need interested
+people who like their own language and write it well, and who are also
+able to synergize with other translators speaking the same language.
+Each translation team has its own mailing list. The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+`http://translationproject.org/', in the "Teams" area.
+
+ If you'd like to volunteer to _work_ at translating messages, you
+should become a member of the translating team for your own language.
+The subscribing address is _not_ the same as the list itself, it has
+`-request' appended. For example, speakers of Swedish can send a
+message to address@hidden', having this message body:
+
+ subscribe
+
+ Keep in mind that team members are expected to participate
+_actively_ in translations, or at solving translational difficulties,
+rather than merely lurking around. If your team does not exist yet and
+you want to start one, or if you are unsure about what to do or how to
+get started, please write to address@hidden' to
+reach the coordinator for all translator teams.
+
+ The English team is special. It works at improving and uniformizing
+the terminology in use. Proven linguistic skills are praised more than
+programming skills, here.
+
+1.5 Available Packages
+======================
+
+Languages are not equally supported in all packages. The following
+matrix shows the current state of internationalization, as of November
+2007. The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
+
+ Ready PO files af am ar az be bg bs ca cs cy da de el en en_GB eo
+ +----------------------------------------------------+
+ Compendium | [] [] [] [] |
+ a2ps | [] [] [] [] [] |
+ aegis | () |
+ ant-phone | () |
+ anubis | [] |
+ ap-utils | |
+ aspell | [] [] [] [] [] |
+ bash | [] |
+ bfd | |
+ bibshelf | [] |
+ binutils | |
+ bison | [] [] |
+ bison-runtime | [] |
+ bluez-pin | [] [] [] [] [] |
+ cflow | [] |
+ clisp | [] [] [] |
+ console-tools | [] [] |
+ coreutils | [] [] [] [] |
+ cpio | |
+ cpplib | [] [] [] |
+ cryptonit | [] |
+ dialog | |
+ diffutils | [] [] [] [] [] [] |
+ doodle | [] |
+ e2fsprogs | [] [] |
+ enscript | [] [] [] [] |
+ fetchmail | [] [] () [] [] |
+ findutils | [] |
+ findutils_stable | [] [] [] |
+ flex | [] [] [] |
+ fslint | |
+ gas | |
+ gawk | [] [] [] |
+ gcal | [] |
+ gcc | [] |
+ gettext-examples | [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] |
+ gettext-tools | [] [] |
+ gip | [] |
+ gliv | [] [] |
+ glunarclock | [] |
+ gmult | [] [] |
+ gnubiff | () |
+ gnucash | [] [] () () [] |
+ gnuedu | |
+ gnulib | [] |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | [] |
+ gpe-aerial | [] [] |
+ gpe-beam | [] [] |
+ gpe-calendar | |
+ gpe-clock | [] [] |
+ gpe-conf | [] [] |
+ gpe-contacts | |
+ gpe-edit | [] |
+ gpe-filemanager | |
+ gpe-go | [] |
+ gpe-login | [] [] |
+ gpe-ownerinfo | [] [] |
+ gpe-package | |
+ gpe-sketchbook | [] [] |
+ gpe-su | [] [] |
+ gpe-taskmanager | [] [] |
+ gpe-timesheet | [] |
+ gpe-today | [] [] |
+ gpe-todo | |
+ gphoto2 | [] [] [] [] |
+ gprof | [] [] |
+ gpsdrive | |
+ gramadoir | [] [] |
+ grep | [] [] |
+ gretl | () |
+ gsasl | |
+ gss | |
+ gst-plugins-bad | [] [] |
+ gst-plugins-base | [] [] |
+ gst-plugins-good | [] [] [] |
+ gst-plugins-ugly | [] [] |
+ gstreamer | [] [] [] [] [] [] [] |
+ gtick | () |
+ gtkam | [] [] [] [] |
+ gtkorphan | [] [] |
+ gtkspell | [] [] [] [] |
+ gutenprint | [] |
+ hello | [] [] [] [] [] |
+ herrie | [] |
+ hylafax | |
+ idutils | [] [] |
+ indent | [] [] [] [] |
+ iso_15924 | |
+ iso_3166 | [] [] [] [] [] [] [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_4217 | [] [] [] |
+ iso_639 | [] [] [] [] |
+ jpilot | [] |
+ jtag | |
+ jwhois | |
+ kbd | [] [] [] [] |
+ keytouch | [] [] |
+ keytouch-editor | [] |
+ keytouch-keyboa... | [] |
+ latrine | () |
+ ld | [] |
+ leafpad | [] [] [] [] [] |
+ libc | [] [] [] [] |
+ libexif | [] |
+ libextractor | [] |
+ libgpewidget | [] [] [] |
+ libgpg-error | [] |
+ libgphoto2 | [] [] |
+ libgphoto2_port | [] [] |
+ libgsasl | |
+ libiconv | [] [] |
+ libidn | [] [] [] |
+ lifelines | [] () |
+ lilypond | [] |
+ lingoteach | |
+ lprng | |
+ lynx | [] [] [] [] |
+ m4 | [] [] [] [] |
+ mailfromd | |
+ mailutils | [] |
+ make | [] [] |
+ man-db | [] [] [] |
+ minicom | [] [] [] |
+ nano | [] [] [] |
+ opcodes | [] |
+ parted | [] [] |
+ pilot-qof | |
+ popt | [] [] [] |
+ psmisc | [] |
+ pwdutils | |
+ qof | |
+ radius | [] |
+ recode | [] [] [] [] [] [] |
+ rpm | [] |
+ screem | |
+ scrollkeeper | [] [] [] [] [] [] [] [] |
+ sed | [] [] [] |
+ shared-mime-info | [] [] [] [] () [] [] [] |
+ sharutils | [] [] [] [] [] [] |
+ shishi | |
+ skencil | [] () |
+ solfege | |
+ soundtracker | [] [] |
+ sp | [] |
+ system-tools-ba... | [] [] [] [] [] [] [] [] [] |
+ tar | [] [] |
+ texinfo | [] [] [] |
+ tin | () () |
+ tuxpaint | [] [] [] [] [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux | [] [] [] [] |
+ util-linux-ng | [] [] [] [] |
+ vorbis-tools | [] |
+ wastesedge | () |
+ wdiff | [] [] [] [] |
+ wget | [] [] [] |
+ xchat | [] [] [] [] [] [] [] |
+ xkeyboard-config | [] |
+ xpad | [] [] [] |
+ +----------------------------------------------------+
+ af am ar az be bg bs ca cs cy da de el en en_GB eo
+ 6 0 2 1 8 26 2 40 48 2 56 88 15 1 15 18
+
+ es et eu fa fi fr ga gl gu he hi hr hu id is it
+ +--------------------------------------------------+
+ Compendium | [] [] [] [] [] |
+ a2ps | [] [] [] () |
+ aegis | |
+ ant-phone | [] |
+ anubis | [] |
+ ap-utils | [] [] |
+ aspell | [] [] [] |
+ bash | [] |
+ bfd | [] [] |
+ bibshelf | [] [] [] |
+ binutils | [] [] [] |
+ bison | [] [] [] [] [] [] |
+ bison-runtime | [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] |
+ cflow | [] |
+ clisp | [] [] |
+ console-tools | |
+ coreutils | [] [] [] [] [] [] |
+ cpio | [] [] [] |
+ cpplib | [] [] |
+ cryptonit | [] |
+ dialog | [] [] [] |
+ diffutils | [] [] [] [] [] [] [] [] [] |
+ doodle | [] [] |
+ e2fsprogs | [] [] [] |
+ enscript | [] [] [] |
+ fetchmail | [] |
+ findutils | [] [] [] |
+ findutils_stable | [] [] [] [] |
+ flex | [] [] [] |
+ fslint | |
+ gas | [] [] |
+ gawk | [] [] [] [] () |
+ gcal | [] [] |
+ gcc | [] |
+ gettext-examples | [] [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] |
+ gettext-tools | [] [] [] [] |
+ gip | [] [] [] [] |
+ gliv | () |
+ glunarclock | [] [] [] |
+ gmult | [] [] [] |
+ gnubiff | () () |
+ gnucash | () () () |
+ gnuedu | [] |
+ gnulib | [] [] [] |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | |
+ gpe-aerial | [] [] |
+ gpe-beam | [] [] |
+ gpe-calendar | |
+ gpe-clock | [] [] [] [] |
+ gpe-conf | [] |
+ gpe-contacts | [] [] |
+ gpe-edit | [] [] [] [] |
+ gpe-filemanager | [] |
+ gpe-go | [] [] [] |
+ gpe-login | [] [] [] |
+ gpe-ownerinfo | [] [] [] [] [] |
+ gpe-package | [] |
+ gpe-sketchbook | [] [] |
+ gpe-su | [] [] [] [] |
+ gpe-taskmanager | [] [] [] |
+ gpe-timesheet | [] [] [] [] |
+ gpe-today | [] [] [] [] |
+ gpe-todo | [] |
+ gphoto2 | [] [] [] [] [] |
+ gprof | [] [] [] [] [] |
+ gpsdrive | [] |
+ gramadoir | [] [] |
+ grep | [] [] [] |
+ gretl | [] [] [] () |
+ gsasl | [] [] |
+ gss | [] [] |
+ gst-plugins-bad | [] [] [] [] |
+ gst-plugins-base | [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] |
+ gstreamer | [] [] [] |
+ gtick | [] [] [] |
+ gtkam | [] [] [] [] |
+ gtkorphan | [] [] |
+ gtkspell | [] [] [] [] [] [] [] |
+ gutenprint | [] |
+ hello | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ herrie | [] |
+ hylafax | |
+ idutils | [] [] [] [] [] |
+ indent | [] [] [] [] [] [] [] [] [] [] |
+ iso_15924 | [] |
+ iso_3166 | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ iso_3166_2 | [] |
+ iso_4217 | [] [] [] [] [] [] |
+ iso_639 | [] [] [] [] [] [] |
+ jpilot | [] [] |
+ jtag | [] |
+ jwhois | [] [] [] [] [] |
+ kbd | [] [] |
+ keytouch | [] [] [] |
+ keytouch-editor | [] |
+ keytouch-keyboa... | [] [] |
+ latrine | [] [] |
+ ld | [] [] [] [] |
+ leafpad | [] [] [] [] [] [] |
+ libc | [] [] [] [] [] |
+ libexif | [] |
+ libextractor | [] |
+ libgpewidget | [] [] [] [] [] |
+ libgpg-error | [] |
+ libgphoto2 | [] [] [] |
+ libgphoto2_port | [] [] |
+ libgsasl | [] [] |
+ libiconv | [] [] [] |
+ libidn | [] [] |
+ lifelines | () |
+ lilypond | [] [] [] |
+ lingoteach | [] [] [] |
+ lprng | |
+ lynx | [] [] [] |
+ m4 | [] [] [] [] |
+ mailfromd | |
+ mailutils | [] [] |
+ make | [] [] [] [] [] [] [] [] |
+ man-db | [] |
+ minicom | [] [] [] [] |
+ nano | [] [] [] [] [] [] [] |
+ opcodes | [] [] [] [] |
+ parted | [] [] [] |
+ pilot-qof | |
+ popt | [] [] [] [] |
+ psmisc | [] [] |
+ pwdutils | |
+ qof | [] |
+ radius | [] [] |
+ recode | [] [] [] [] [] [] [] [] |
+ rpm | [] [] |
+ screem | |
+ scrollkeeper | [] [] [] |
+ sed | [] [] [] [] [] |
+ shared-mime-info | [] [] [] [] [] [] |
+ sharutils | [] [] [] [] [] [] [] [] |
+ shishi | [] |
+ skencil | [] [] |
+ solfege | [] |
+ soundtracker | [] [] [] |
+ sp | [] |
+ system-tools-ba... | [] [] [] [] [] [] [] [] [] |
+ tar | [] [] [] [] [] |
+ texinfo | [] [] [] |
+ tin | [] () |
+ tuxpaint | [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | [] [] |
+ util-linux | [] [] [] [] [] [] [] |
+ util-linux-ng | [] [] [] [] [] [] [] |
+ vorbis-tools | |
+ wastesedge | () |
+ wdiff | [] [] [] [] [] [] [] [] |
+ wget | [] [] [] [] [] [] [] [] |
+ xchat | [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] [] |
+ xpad | [] [] [] |
+ +--------------------------------------------------+
+ es et eu fa fi fr ga gl gu he hi hr hu id is it
+ 85 22 14 2 48 101 61 12 2 8 2 6 53 29 1 52
+
+ ja ka ko ku ky lg lt lv mk mn ms mt nb ne nl nn
+ +--------------------------------------------------+
+ Compendium | [] |
+ a2ps | () [] [] |
+ aegis | () |
+ ant-phone | [] |
+ anubis | [] [] [] |
+ ap-utils | [] |
+ aspell | [] [] |
+ bash | [] |
+ bfd | |
+ bibshelf | [] |
+ binutils | |
+ bison | [] [] [] |
+ bison-runtime | [] [] [] |
+ bluez-pin | [] [] [] |
+ cflow | |
+ clisp | [] |
+ console-tools | |
+ coreutils | [] |
+ cpio | [] |
+ cpplib | [] |
+ cryptonit | [] |
+ dialog | [] [] |
+ diffutils | [] [] [] |
+ doodle | |
+ e2fsprogs | [] |
+ enscript | [] |
+ fetchmail | [] [] |
+ findutils | [] |
+ findutils_stable | [] |
+ flex | [] [] |
+ fslint | |
+ gas | |
+ gawk | [] [] |
+ gcal | |
+ gcc | |
+ gettext-examples | [] [] [] |
+ gettext-runtime | [] [] [] |
+ gettext-tools | [] [] |
+ gip | [] [] |
+ gliv | [] |
+ glunarclock | [] [] |
+ gmult | [] [] [] |
+ gnubiff | |
+ gnucash | () () () |
+ gnuedu | |
+ gnulib | [] [] |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | [] |
+ gpe-aerial | [] |
+ gpe-beam | [] |
+ gpe-calendar | [] |
+ gpe-clock | [] [] [] |
+ gpe-conf | [] [] [] |
+ gpe-contacts | [] |
+ gpe-edit | [] [] [] |
+ gpe-filemanager | [] [] |
+ gpe-go | [] [] [] |
+ gpe-login | [] [] [] |
+ gpe-ownerinfo | [] [] |
+ gpe-package | [] [] |
+ gpe-sketchbook | [] [] |
+ gpe-su | [] [] [] |
+ gpe-taskmanager | [] [] [] [] |
+ gpe-timesheet | [] |
+ gpe-today | [] [] |
+ gpe-todo | [] |
+ gphoto2 | [] [] |
+ gprof | [] |
+ gpsdrive | [] |
+ gramadoir | () |
+ grep | [] [] |
+ gretl | |
+ gsasl | [] |
+ gss | |
+ gst-plugins-bad | [] |
+ gst-plugins-base | [] |
+ gst-plugins-good | [] |
+ gst-plugins-ugly | [] |
+ gstreamer | [] |
+ gtick | [] |
+ gtkam | [] [] |
+ gtkorphan | [] |
+ gtkspell | [] [] |
+ gutenprint | [] |
+ hello | [] [] [] [] [] [] [] |
+ herrie | [] |
+ hylafax | |
+ idutils | [] |
+ indent | [] [] |
+ iso_15924 | [] |
+ iso_3166 | [] [] [] [] [] [] [] [] |
+ iso_3166_2 | [] |
+ iso_4217 | [] [] [] |
+ iso_639 | [] [] [] [] |
+ jpilot | () () |
+ jtag | |
+ jwhois | [] |
+ kbd | [] |
+ keytouch | [] |
+ keytouch-editor | [] |
+ keytouch-keyboa... | |
+ latrine | [] |
+ ld | |
+ leafpad | [] [] |
+ libc | [] [] [] |
+ libexif | |
+ libextractor | |
+ libgpewidget | [] |
+ libgpg-error | |
+ libgphoto2 | [] |
+ libgphoto2_port | [] |
+ libgsasl | [] |
+ libiconv | [] |
+ libidn | [] [] |
+ lifelines | [] |
+ lilypond | [] |
+ lingoteach | [] |
+ lprng | |
+ lynx | [] [] |
+ m4 | [] [] |
+ mailfromd | |
+ mailutils | |
+ make | [] [] [] |
+ man-db | |
+ minicom | [] |
+ nano | [] [] [] |
+ opcodes | [] |
+ parted | [] [] |
+ pilot-qof | |
+ popt | [] [] [] |
+ psmisc | [] [] [] |
+ pwdutils | |
+ qof | |
+ radius | |
+ recode | [] |
+ rpm | [] [] |
+ screem | [] |
+ scrollkeeper | [] [] [] [] |
+ sed | [] [] |
+ shared-mime-info | [] [] [] [] [] [] [] |
+ sharutils | [] [] |
+ shishi | |
+ skencil | |
+ solfege | () () |
+ soundtracker | |
+ sp | () |
+ system-tools-ba... | [] [] [] [] |
+ tar | [] [] [] |
+ texinfo | [] [] |
+ tin | |
+ tuxpaint | () [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux | [] [] |
+ util-linux-ng | [] [] |
+ vorbis-tools | |
+ wastesedge | [] |
+ wdiff | [] [] |
+ wget | [] [] |
+ xchat | [] [] [] [] |
+ xkeyboard-config | [] [] [] |
+ xpad | [] [] [] |
+ +--------------------------------------------------+
+ ja ka ko ku ky lg lt lv mk mn ms mt nb ne nl nn
+ 51 2 25 3 2 0 6 0 2 2 20 0 11 1 103 6
+
+ or pa pl pt pt_BR rm ro ru rw sk sl sq sr sv ta
+ +--------------------------------------------------+
+ Compendium | [] [] [] [] [] |
+ a2ps | () [] [] [] [] [] [] |
+ aegis | () () |
+ ant-phone | [] [] |
+ anubis | [] [] [] |
+ ap-utils | () |
+ aspell | [] [] [] |
+ bash | [] [] |
+ bfd | |
+ bibshelf | [] |
+ binutils | [] [] |
+ bison | [] [] [] [] [] |
+ bison-runtime | [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] [] [] [] [] |
+ cflow | [] |
+ clisp | [] |
+ console-tools | [] |
+ coreutils | [] [] [] [] |
+ cpio | [] [] [] |
+ cpplib | [] |
+ cryptonit | [] [] |
+ dialog | [] |
+ diffutils | [] [] [] [] [] [] |
+ doodle | [] [] |
+ e2fsprogs | [] [] |
+ enscript | [] [] [] [] [] |
+ fetchmail | [] [] [] |
+ findutils | [] [] [] |
+ findutils_stable | [] [] [] [] [] [] |
+ flex | [] [] [] [] [] |
+ fslint | [] |
+ gas | |
+ gawk | [] [] [] [] |
+ gcal | [] |
+ gcc | [] [] |
+ gettext-examples | [] [] [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] [] [] |
+ gettext-tools | [] [] [] [] [] [] [] |
+ gip | [] [] [] [] |
+ gliv | [] [] [] [] [] [] |
+ glunarclock | [] [] [] [] [] [] |
+ gmult | [] [] [] [] |
+ gnubiff | () [] |
+ gnucash | () [] |
+ gnuedu | |
+ gnulib | [] [] [] |
+ gnunet | |
+ gnunet-gtk | [] |
+ gnutls | [] [] |
+ gpe-aerial | [] [] [] [] [] [] [] |
+ gpe-beam | [] [] [] [] [] [] [] |
+ gpe-calendar | [] [] [] [] |
+ gpe-clock | [] [] [] [] [] [] [] [] |
+ gpe-conf | [] [] [] [] [] [] [] |
+ gpe-contacts | [] [] [] [] [] |
+ gpe-edit | [] [] [] [] [] [] [] [] [] |
+ gpe-filemanager | [] [] |
+ gpe-go | [] [] [] [] [] [] [] [] |
+ gpe-login | [] [] [] [] [] [] [] [] |
+ gpe-ownerinfo | [] [] [] [] [] [] [] [] |
+ gpe-package | [] [] |
+ gpe-sketchbook | [] [] [] [] [] [] [] [] |
+ gpe-su | [] [] [] [] [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] [] [] [] [] |
+ gpe-timesheet | [] [] [] [] [] [] [] [] |
+ gpe-today | [] [] [] [] [] [] [] [] |
+ gpe-todo | [] [] [] [] |
+ gphoto2 | [] [] [] [] [] [] |
+ gprof | [] [] [] |
+ gpsdrive | [] [] |
+ gramadoir | [] [] |
+ grep | [] [] [] [] |
+ gretl | [] [] [] |
+ gsasl | [] [] [] |
+ gss | [] [] [] [] |
+ gst-plugins-bad | [] [] [] |
+ gst-plugins-base | [] [] |
+ gst-plugins-good | [] [] |
+ gst-plugins-ugly | [] [] [] |
+ gstreamer | [] [] [] [] |
+ gtick | [] |
+ gtkam | [] [] [] [] [] |
+ gtkorphan | [] |
+ gtkspell | [] [] [] [] [] [] [] [] |
+ gutenprint | [] |
+ hello | [] [] [] [] [] [] [] [] |
+ herrie | [] [] [] |
+ hylafax | |
+ idutils | [] [] [] [] [] |
+ indent | [] [] [] [] [] [] [] |
+ iso_15924 | |
+ iso_3166 | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_4217 | [] [] [] [] [] [] [] |
+ iso_639 | [] [] [] [] [] [] [] |
+ jpilot | |
+ jtag | [] |
+ jwhois | [] [] [] [] |
+ kbd | [] [] [] |
+ keytouch | [] |
+ keytouch-editor | [] |
+ keytouch-keyboa... | [] |
+ latrine | |
+ ld | [] |
+ leafpad | [] [] [] [] [] [] |
+ libc | [] [] [] [] |
+ libexif | [] [] |
+ libextractor | [] [] |
+ libgpewidget | [] [] [] [] [] [] [] [] |
+ libgpg-error | [] [] [] |
+ libgphoto2 | [] |
+ libgphoto2_port | [] [] [] |
+ libgsasl | [] [] [] [] |
+ libiconv | [] [] [] |
+ libidn | [] [] () |
+ lifelines | [] [] |
+ lilypond | |
+ lingoteach | [] |
+ lprng | [] |
+ lynx | [] [] [] |
+ m4 | [] [] [] [] [] |
+ mailfromd | [] |
+ mailutils | [] [] [] |
+ make | [] [] [] [] |
+ man-db | [] [] [] [] |
+ minicom | [] [] [] [] [] |
+ nano | [] [] [] [] |
+ opcodes | [] [] |
+ parted | [] |
+ pilot-qof | |
+ popt | [] [] [] [] |
+ psmisc | [] [] |
+ pwdutils | [] [] |
+ qof | [] [] |
+ radius | [] [] |
+ recode | [] [] [] [] [] [] [] |
+ rpm | [] [] [] [] |
+ screem | |
+ scrollkeeper | [] [] [] [] [] [] [] |
+ sed | [] [] [] [] [] [] [] [] [] |
+ shared-mime-info | [] [] [] [] [] [] |
+ sharutils | [] [] [] [] |
+ shishi | [] |
+ skencil | [] [] [] |
+ solfege | [] |
+ soundtracker | [] [] |
+ sp | |
+ system-tools-ba... | [] [] [] [] [] [] [] [] [] |
+ tar | [] [] [] [] |
+ texinfo | [] [] [] [] |
+ tin | () |
+ tuxpaint | [] [] [] [] [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux | [] [] [] [] |
+ util-linux-ng | [] [] [] [] |
+ vorbis-tools | [] |
+ wastesedge | |
+ wdiff | [] [] [] [] [] [] [] |
+ wget | [] [] [] [] |
+ xchat | [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] |
+ xpad | [] [] [] |
+ +--------------------------------------------------+
+ or pa pl pt pt_BR rm ro ru rw sk sl sq sr sv ta
+ 0 5 77 31 53 4 58 72 3 45 46 9 45 122 3
+
+ tg th tk tr uk ven vi wa xh zh_CN zh_HK zh_TW zu
+ +---------------------------------------------------+
+ Compendium | [] [] [] [] |
19
+ a2ps | [] [] [] |
19
+ aegis | [] |
1
+ ant-phone | [] [] |
6
+ anubis | [] [] [] |
11
+ ap-utils | () [] |
4
+ aspell | [] [] [] |
16
+ bash | [] |
6
+ bfd | |
2
+ bibshelf | [] |
7
+ binutils | [] [] [] [] |
9
+ bison | [] [] [] [] |
20
+ bison-runtime | [] [] [] [] |
18
+ bluez-pin | [] [] [] [] [] [] |
28
+ cflow | [] [] |
5
+ clisp | |
9
+ console-tools | [] [] |
5
+ coreutils | [] [] [] |
18
+ cpio | [] [] [] [] |
11
+ cpplib | [] [] [] [] [] |
12
+ cryptonit | [] |
6
+ dialog | [] [] [] |
9
+ diffutils | [] [] [] [] [] |
29
+ doodle | [] |
6
+ e2fsprogs | [] [] |
10
+ enscript | [] [] [] |
16
+ fetchmail | [] [] |
12
+ findutils | [] [] [] |
11
+ findutils_stable | [] [] [] [] |
18
+ flex | [] [] |
15
+ fslint | [] |
2
+ gas | [] |
3
+ gawk | [] [] [] |
16
+ gcal | [] |
5
+ gcc | [] [] [] |
7
+ gettext-examples | [] [] [] [] [] [] |
29
+ gettext-runtime | [] [] [] [] [] [] |
28
+ gettext-tools | [] [] [] [] [] |
20
+ gip | [] [] |
13
+ gliv | [] [] |
11
+ glunarclock | [] [] [] |
15
+ gmult | [] [] [] [] |
16
+ gnubiff | [] |
2
+ gnucash | () [] |
5
+ gnuedu | [] |
2
+ gnulib | [] |
10
+ gnunet | | 0
+ gnunet-gtk | [] [] |
3
+ gnutls | |
4
+ gpe-aerial | [] [] |
14
+ gpe-beam | [] [] |
14
+ gpe-calendar | [] [] |
7
+ gpe-clock | [] [] [] [] |
21
+ gpe-conf | [] [] [] |
16
+ gpe-contacts | [] [] |
10
+ gpe-edit | [] [] [] [] [] |
22
+ gpe-filemanager | [] [] |
7
+ gpe-go | [] [] [] [] |
19
+ gpe-login | [] [] [] [] [] |
21
+ gpe-ownerinfo | [] [] [] [] |
21
+ gpe-package | [] |
6
+ gpe-sketchbook | [] [] |
16
+ gpe-su | [] [] [] [] |
21
+ gpe-taskmanager | [] [] [] [] |
21
+ gpe-timesheet | [] [] [] [] |
18
+ gpe-today | [] [] [] [] [] |
21
+ gpe-todo | [] [] |
8
+ gphoto2 | [] [] [] [] |
21
+ gprof | [] [] |
13
+ gpsdrive | [] |
5
+ gramadoir | [] |
7
+ grep | [] |
12
+ gretl | |
6
+ gsasl | [] [] [] |
9
+ gss | [] |
7
+ gst-plugins-bad | [] [] [] |
13
+ gst-plugins-base | [] [] |
11
+ gst-plugins-good | [] [] [] [] [] |
16
+ gst-plugins-ugly | [] [] [] |
13
+ gstreamer | [] [] [] |
18
+ gtick | [] [] |
7
+ gtkam | [] |
16
+ gtkorphan | [] |
7
+ gtkspell | [] [] [] [] [] [] |
27
+ gutenprint | |
4
+ hello | [] [] [] [] [] |
38
+ herrie | [] [] |
8
+ hylafax | | 0
+ idutils | [] [] |
15
+ indent | [] [] [] [] [] |
28
+ iso_15924 | [] [] |
4
+ iso_3166 | [] [] [] [] [] [] [] [] [] |
54
+ iso_3166_2 | [] [] |
4
+ iso_4217 | [] [] [] [] [] |
24
+ iso_639 | [] [] [] [] [] |
26
+ jpilot | [] [] [] [] |
7
+ jtag | [] |
3
+ jwhois | [] [] [] |
13
+ kbd | [] [] [] |
13
+ keytouch | [] |
8
+ keytouch-editor | [] |
5
+ keytouch-keyboa... | [] |
5
+ latrine | [] [] |
5
+ ld | [] [] [] [] |
10
+ leafpad | [] [] [] [] [] |
24
+ libc | [] [] [] |
19
+ libexif | [] |
5
+ libextractor | [] |
5
+ libgpewidget | [] [] [] |
20
+ libgpg-error | [] |
6
+ libgphoto2 | [] [] |
9
+ libgphoto2_port | [] [] [] |
11
+ libgsasl | [] |
8
+ libiconv | [] [] |
11
+ libidn | [] [] |
11
+ lifelines | |
4
+ lilypond | [] |
6
+ lingoteach | [] |
6
+ lprng | [] |
2
+ lynx | [] [] [] |
15
+ m4 | [] [] [] |
18
+ mailfromd | [] [] |
3
+ mailutils | [] [] |
8
+ make | [] [] [] |
20
+ man-db | [] |
9
+ minicom | [] |
14
+ nano | [] [] [] |
20
+ opcodes | [] [] |
10
+ parted | [] [] [] |
11
+ pilot-qof | [] |
1
+ popt | [] [] [] [] |
18
+ psmisc | [] [] |
10
+ pwdutils | [] |
3
+ qof | [] |
4
+ radius | [] [] |
7
+ recode | [] [] [] |
25
+ rpm | [] [] [] [] |
13
+ screem | [] |
2
+ scrollkeeper | [] [] [] [] |
26
+ sed | [] [] [] [] |
23
+ shared-mime-info | [] [] [] |
29
+ sharutils | [] [] [] |
23
+ shishi | [] |
3
+ skencil | [] |
7
+ solfege | [] |
3
+ soundtracker | [] [] |
9
+ sp | [] |
3
+ system-tools-ba... | [] [] [] [] [] [] [] |
38
+ tar | [] [] [] |
17
+ texinfo | [] [] [] |
15
+ tin | |
1
+ tuxpaint | [] [] [] |
19
+ unicode-han-tra... | | 0
+ unicode-transla... | |
2
+ util-linux | [] [] [] |
20
+ util-linux-ng | [] [] [] |
20
+ vorbis-tools | [] [] |
4
+ wastesedge | |
1
+ wdiff | [] [] |
23
+ wget | [] [] [] |
20
+ xchat | [] [] [] [] |
29
+ xkeyboard-config | [] [] [] |
14
+ xpad | [] [] [] |
15
+ +---------------------------------------------------+
+ 76 teams tg th tk tr uk ven vi wa xh zh_CN zh_HK zh_TW zu
+ 163 domains 0 3 1 74 51 0 143 21 1 57 7 45 0
2036
+
+ Some counters in the preceding matrix are higher than the number of
+visible blocks let us expect. This is because a few extra PO files are
+used for implementing regional variants of languages, or language
+dialects.
+
+ For a PO file in the matrix above to be effective, the package to
+which it applies should also have been internationalized and
+distributed as such by its maintainer. There might be an observable
+lag between the mere existence a PO file and its wide availability in a
+distribution.
+
+ If November 2007 seems to be old, you may fetch a more recent copy
+of this `ABOUT-NLS' file on most GNU archive sites. The most
+up-to-date matrix with full percentage details can be found at
+`http://translationproject.org/extra/matrix.html'.
+
+1.6 Using `gettext' in new packages
+===================================
+
+If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU `gettext' in your
+package. Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library. This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
+
+ Once the sources are changed appropriately and the setup can handle
+the use of `gettext' the only thing missing are the translations. The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project. Therefore the information given above
+applies also for every other Free Software Project. Contact
address@hidden' to make the `.pot' files available
+to the translation teams.
+
diff --git a/myserver/config.rpath b/myserver/config.rpath
new file mode 100755
index 0000000..c547c68
--- /dev/null
+++ b/myserver/config.rpath
@@ -0,0 +1,666 @@
+#! /bin/sh
+# Output a system dependent set of variables, describing how to set the
+# run time search path of shared libraries in an executable.
+#
+# Copyright 1996-2007 Free Software Foundation, Inc.
+# Taken from GNU libtool, 2001
+# Originally by Gordon Matzigkeit <address@hidden>, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+#
+# The first argument passed to this file is the canonical host specification,
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
+# should be set by the caller.
+#
+# The set of defined variables is at the end of this script.
+
+# Known limitations:
+# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
+# than 256 bytes, otherwise the compiler driver will dump core. The only
+# known workaround is to choose shorter directory names for the build
+# directory and/or the installation directory.
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+shrext=.so
+
+host="$1"
+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+# Code taken from libtool.m4's _LT_CC_BASENAME.
+
+for cc_temp in $CC""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
+
+# Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC.
+
+wl=
+if test "$GCC" = yes; then
+ wl='-Wl,'
+else
+ case "$host_os" in
+ aix*)
+ wl='-Wl,'
+ ;;
+ darwin*)
+ case $cc_basename in
+ xlc*)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
+ mingw* | cygwin* | pw32* | os2*)
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ wl='-Wl,'
+ ;;
+ irix5* | irix6* | nonstopux*)
+ wl='-Wl,'
+ ;;
+ newsos6)
+ ;;
+ linux* | k*bsd*-gnu)
+ case $cc_basename in
+ icc* | ecc*)
+ wl='-Wl,'
+ ;;
+ pgcc | pgf77 | pgf90)
+ wl='-Wl,'
+ ;;
+ ccc*)
+ wl='-Wl,'
+ ;;
+ como)
+ wl='-lopt='
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ osf3* | osf4* | osf5*)
+ wl='-Wl,'
+ ;;
+ rdos*)
+ ;;
+ solaris*)
+ wl='-Wl,'
+ ;;
+ sunos4*)
+ wl='-Qoption ld '
+ ;;
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ wl='-Wl,'
+ ;;
+ sysv4*MP*)
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ wl='-Wl,'
+ ;;
+ unicos*)
+ wl='-Wl,'
+ ;;
+ uts4*)
+ ;;
+ esac
+fi
+
+# Code taken from libtool.m4's AC_LIBTOOL_PROG_LD_SHLIBS.
+
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+
+case "$host_os" in
+ cygwin* | mingw* | pw32*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ # Unlike libtool, we use -rpath here, not --rpath, since the documented
+ # option of GNU ld is called -rpath, not --rpath.
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ case "$host_os" in
+ aix3* | aix4* | aix5*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ fi
+ ;;
+ amigaos*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # Samuel A. Falvo II <address@hidden> reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we cannot use
+ # them.
+ ld_shlibs=no
+ ;;
+ beos*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ cygwin* | mingw* | pw32*)
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ gnu* | linux* | k*bsd*-gnu)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ netbsd*)
+ ;;
+ solaris*)
+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null;
then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null;
then
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo
${wl}-rpath,$libdir`'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+ sunos4*)
+ hardcode_direct=yes
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ if test "$ld_shlibs" = no; then
+ hardcode_libdir_flag_spec=
+ fi
+else
+ case "$host_os" in
+ aix3*)
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+ aix4* | aix5*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ else
+ aix_use_runtimelinking=no
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+ fi
+ hardcode_direct=yes
+ hardcode_libdir_separator=':'
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ fi
+ # Begin _LT_AC_SYS_LIBPATH_AIX.
+ echo 'int main () { return 0; }' > conftest.c
+ ${CC} ${LDFLAGS} conftest.c -o conftest
+ aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File
Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File
Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ fi
+ if test -z "$aix_libpath"; then
+ aix_libpath="/usr/lib:/lib"
+ fi
+ rm -f conftest.c conftest
+ # End _LT_AC_SYS_LIBPATH_AIX.
+ if test "$aix_use_runtimelinking" = yes; then
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ else
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ fi
+ fi
+ ;;
+ amigaos*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # see comment about different semantics on the GNU ld section
+ ld_shlibs=no
+ ;;
+ bsdi[45]*)
+ ;;
+ cygwin* | mingw* | pw32*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ libext=lib
+ ;;
+ darwin* | rhapsody*)
+ hardcode_direct=no
+ if test "$GCC" = yes ; then
+ :
+ else
+ case $cc_basename in
+ xlc*)
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+ fi
+ ;;
+ dgux*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+ freebsd2.2*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ freebsd2*)
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ freebsd* | dragonfly*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ hpux9*)
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ hpux10*)
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+ hpux11*)
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ ;;
+ *)
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+ irix5* | irix6* | nonstopux*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ netbsd*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ newsos6)
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct=yes
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ else
+ case "$host_os" in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ osf3*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ osf4* | osf5*)
+ if test "$GCC" = yes; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ # Both cc and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ hardcode_libdir_separator=:
+ ;;
+ solaris*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ sunos4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ sysv4)
+ case $host_vendor in
+ sni)
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ hardcode_direct=no
+ ;;
+ motorola)
+ hardcode_direct=no #Motorola manual says yes, but my tests say they
lie
+ ;;
+ esac
+ ;;
+ sysv4.3*)
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ ld_shlibs=yes
+ fi
+ ;;
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* |
sco3.2v5.0.[024]*)
+ ;;
+ sysv5* | sco3.2v5* | sco5v6*)
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo
${wl}-R,$libdir`'
+ hardcode_libdir_separator=':'
+ ;;
+ uts4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+fi
+
+# Check dynamic linker characteristics
+# Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER.
+# Unlike libtool.m4, here we don't care about _all_ names of the library, but
+# only about the one the linker finds when passed -lNAME. This is the last
+# element of library_names_spec in libtool.m4, or possibly two of them if the
+# linker has special search rules.
+library_names_spec= # the last element of library_names_spec in libtool.m4
+libname_spec='lib$name'
+case "$host_os" in
+ aix3*)
+ library_names_spec='$libname.a'
+ ;;
+ aix4* | aix5*)
+ library_names_spec='$libname$shrext'
+ ;;
+ amigaos*)
+ library_names_spec='$libname.a'
+ ;;
+ beos*)
+ library_names_spec='$libname$shrext'
+ ;;
+ bsdi[45]*)
+ library_names_spec='$libname$shrext'
+ ;;
+ cygwin* | mingw* | pw32*)
+ shrext=.dll
+ library_names_spec='$libname.dll.a $libname.lib'
+ ;;
+ darwin* | rhapsody*)
+ shrext=.dylib
+ library_names_spec='$libname$shrext'
+ ;;
+ dgux*)
+ library_names_spec='$libname$shrext'
+ ;;
+ freebsd1*)
+ ;;
+ freebsd* | dragonfly*)
+ case "$host_os" in
+ freebsd[123]*)
+ library_names_spec='$libname$shrext$versuffix' ;;
+ *)
+ library_names_spec='$libname$shrext' ;;
+ esac
+ ;;
+ gnu*)
+ library_names_spec='$libname$shrext'
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $host_cpu in
+ ia64*)
+ shrext=.so
+ ;;
+ hppa*64*)
+ shrext=.sl
+ ;;
+ *)
+ shrext=.sl
+ ;;
+ esac
+ library_names_spec='$libname$shrext'
+ ;;
+ interix[3-9]*)
+ library_names_spec='$libname$shrext'
+ ;;
+ irix5* | irix6* | nonstopux*)
+ library_names_spec='$libname$shrext'
+ case "$host_os" in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32
shlibsuff=N32 ;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
+ *) libsuff= shlibsuff= ;;
+ esac
+ ;;
+ esac
+ ;;
+ linux*oldld* | linux*aout* | linux*coff*)
+ ;;
+ linux* | k*bsd*-gnu)
+ library_names_spec='$libname$shrext'
+ ;;
+ knetbsd*-gnu)
+ library_names_spec='$libname$shrext'
+ ;;
+ netbsd*)
+ library_names_spec='$libname$shrext'
+ ;;
+ newsos6)
+ library_names_spec='$libname$shrext'
+ ;;
+ nto-qnx*)
+ library_names_spec='$libname$shrext'
+ ;;
+ openbsd*)
+ library_names_spec='$libname$shrext$versuffix'
+ ;;
+ os2*)
+ libname_spec='$name'
+ shrext=.dll
+ library_names_spec='$libname.a'
+ ;;
+ osf3* | osf4* | osf5*)
+ library_names_spec='$libname$shrext'
+ ;;
+ rdos*)
+ ;;
+ solaris*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sunos4*)
+ library_names_spec='$libname$shrext$versuffix'
+ ;;
+ sysv4 | sysv4.3*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sysv4*MP*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ library_names_spec='$libname$shrext'
+ ;;
+ uts4*)
+ library_names_spec='$libname$shrext'
+ ;;
+esac
+
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
+shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
+escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e
"$sed_quote_subst"`
+escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e
"$sed_quote_subst"`
+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e
's/^X//' -e "$sed_quote_subst"`
+
+LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
+
+# How to pass a linker flag through the compiler.
+wl="$escaped_wl"
+
+# Static library suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally "so").
+shlibext="$shlibext"
+
+# Format of library name prefix.
+libname_spec="$escaped_libname_spec"
+
+# Library names that the linker finds when passed -lNAME.
+library_names_spec="$escaped_library_names_spec"
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator="$hardcode_libdir_separator"
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct="$hardcode_direct"
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L="$hardcode_minus_L"
+
+EOF
-----------------------------------------------------------------------
Summary of changes:
myserver/ABOUT-NLS | 1068 +++
myserver/INSTALL | 316 +-
myserver/Makefile.am | 8 +-
myserver/autogen.sh | 39 +-
myserver/binaries/Makefile.am | 2 +-
myserver/binaries/certificates/Makefile.am | 4 +-
myserver/binaries/logs/Makefile.am | 2 +-
myserver/binaries/web/Makefile.am | 2 +-
myserver/binaries/web/cgi-bin/Makefile.am | 3 +-
myserver/binaries/web/cgi-src/math_sum/Makefile.am | 4 +-
myserver/binaries/web/cgi-src/post/Makefile.am | 4 +-
myserver/config.guess | 1516 ----
myserver/config.rpath | 666 ++
myserver/config.sub | 1626 ----
myserver/{configure.in => configure.ac} | 48 +-
myserver/depcomp | 423 -
myserver/install-sh | 507 --
myserver/ltmain.sh | 6928 ---------------
myserver/m4/gnome-pthread-check.m4 | 17 -
myserver/m4/iconv.m4 | 180 -
myserver/m4/lib-ld.m4 | 110 -
myserver/m4/lib-link.m4 | 709 --
myserver/m4/lib-prefix.m4 | 185 -
myserver/m4/libtool.m4 | 8831 ++++++++++++--------
myserver/m4/libxml.m4 | 188 -
myserver/m4/progtest.m4 | 92 -
myserver/missing | 367 -
myserver/src/Makefile.am | 2 +-
myserver/src/base/Makefile.am | 2 +-
myserver/src/base/base64/Makefile.am | 2 +-
myserver/src/base/bitvec/Makefile.am | 2 +-
myserver/src/base/dynamic_lib/Makefile.am | 2 +-
myserver/src/base/file/Makefile.am | 2 +-
myserver/src/base/files_cache/Makefile.am | 2 +-
myserver/src/base/find_data/Makefile.am | 2 +-
myserver/src/base/hash_map/Makefile.am | 2 +-
myserver/src/base/home_dir/Makefile.am | 2 +-
myserver/src/base/md5/Makefile.am | 2 +-
myserver/src/base/mem_buff/Makefile.am | 2 +-
myserver/src/base/multicast/Makefile.am | 2 +-
myserver/src/base/pipe/Makefile.am | 2 +-
myserver/src/base/process/Makefile.am | 2 +-
myserver/src/base/regex/Makefile.am | 2 +-
myserver/src/base/safetime/Makefile.am | 2 +-
myserver/src/base/slab/Makefile.am | 2 +-
myserver/src/base/socket/Makefile.am | 2 +-
myserver/src/base/socket_pair/Makefile.am | 2 +-
myserver/src/base/ssl/Makefile.am | 2 +-
myserver/src/base/string/Makefile.am | 2 +-
myserver/src/base/sync/Makefile.am | 2 +-
myserver/src/base/thread/Makefile.am | 2 +-
myserver/src/base/unix_socket/Makefile.am | 2 +-
myserver/src/base/xml/Makefile.am | 2 +-
myserver/src/conf/Makefile.am | 2 +-
myserver/src/conf/mime/Makefile.am | 2 +-
myserver/src/conf/security/Makefile.am | 2 +-
myserver/src/conf/vhost/Makefile.am | 2 +-
myserver/src/connection/Makefile.am | 2 +-
myserver/src/connections_scheduler/Makefile.am | 2 +-
myserver/src/filter/Makefile.am | 2 +-
myserver/src/filter/gzip/Makefile.am | 2 +-
myserver/src/http_handler/Makefile.am | 2 +-
myserver/src/http_handler/cgi/Makefile.am | 2 +-
myserver/src/http_handler/fastcgi/Makefile.am | 2 +-
myserver/src/http_handler/http_dir/Makefile.am | 2 +-
myserver/src/http_handler/http_file/Makefile.am | 2 +-
myserver/src/http_handler/isapi/Makefile.am | 2 +-
myserver/src/http_handler/mscgi/Makefile.am | 2 +-
myserver/src/http_handler/proxy/Makefile.am | 2 +-
myserver/src/http_handler/scgi/Makefile.am | 2 +-
myserver/src/http_handler/wincgi/Makefile.am | 2 +-
myserver/src/log/Makefile.am | 2 +-
myserver/src/plugin/Makefile.am | 2 +-
myserver/src/protocol/Makefile.am | 2 +-
myserver/src/protocol/control/Makefile.am | 2 +-
myserver/src/protocol/ftp/Makefile.am | 2 +-
myserver/src/protocol/http/Makefile.am | 2 +-
myserver/src/protocol/http/env/Makefile.am | 2 +-
myserver/src/protocol/https/Makefile.am | 2 +-
myserver/src/server/Makefile.am | 2 +-
80 files changed, 7246 insertions(+), 16705 deletions(-)
create mode 100644 myserver/ABOUT-NLS
delete mode 100755 myserver/config.guess
create mode 100755 myserver/config.rpath
delete mode 100755 myserver/config.sub
rename myserver/{configure.in => configure.ac} (96%)
delete mode 100755 myserver/depcomp
delete mode 100755 myserver/install-sh
delete mode 100755 myserver/ltmain.sh
delete mode 100644 myserver/m4/gnome-pthread-check.m4
delete mode 100644 myserver/m4/iconv.m4
delete mode 100644 myserver/m4/lib-ld.m4
delete mode 100644 myserver/m4/lib-link.m4
delete mode 100644 myserver/m4/lib-prefix.m4
delete mode 100644 myserver/m4/libxml.m4
delete mode 100644 myserver/m4/progtest.m4
delete mode 100755 myserver/missing
hooks/post-receive
--
GNU MyServer
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [myserver-commit] [SCM] GNU MyServer branch, master, updated. 2b2688341a4c6138b6ee3856b2456e95818505db,
Giuseppe Scrivano <=