octave-maintainers
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fwd: Re: R: Is axes() required before plot when using child of axes on O


From: Tatsuro MATSUOKA
Subject: Fwd: Re: R: Is axes() required before plot when using child of axes on Octave 3.0.4?
Date: Sun, 22 Feb 2009 06:24:44 +0900 (JST)

Sorry I omitted the mail addredd of Rafael,Rob and Benjamin.


--- Tatsuro MATSUOKA  wrote:

> Date:Sun, 22 Feb 2009 06:21:54 +0900 (JST)
> From:Tatsuro MATSUOKA <address@hidden>
> Subject:Re: R: Is axes() required before plot when using child of axes on 
> Octave 3.0.4?
> To:address@hidden
> CC:MATSUOKA Tatsuro <address@hidden>, Jaroslav Hajek <address@hidden>,
> address@hidden
> 
> Hello Rafael,Rob and Benjamin 
> 
> It will be grateful for me you to check the below under Octave 3.0.4RC4 in 
> your built binaries.
> 
> http://www.nabble.com/forum/ViewPost.jtp?post=22130353&framed=y
> 
> Tatsuro
> 
> --- Marco Atzeri  wrote:
> 
> > 
> > --- Sab 21/2/09, Tatsuro MATSUOKA  ha scritto:
> > 
> > > Da: Tatsuro MATSUOKA <address@hidden>
> > > Oggetto: Is axes() required before plot when using child of axes on 
> > > Octave 3.0.4?
> > > A: "Jaroslav Hajek" <address@hidden>, address@hidden
> > > Cc: "MATSUOKA Tatsuro" <address@hidden>
> > > Data: Sabato 21 febbraio 2009, 00:15
> > > Hello
> > > 
> > > I have tried to use the script attached to this mail.
> > > 
> > > I add two 'axes' commands in lines 45 and 61.
> > > 
> > > For octave 3.0.2 (mingw: Bejamin), the 'axes'
> > > commands are not needed.
> > > For octave 3.0.3(MSVC and cygwin), 'hold on' was
> > > not effective without the axes command before hold
> > > on.
> > > For octave 3.0.4(mingw, Built by myself), plot did not
> > > appreared because of errors.
> > > 
> > > error: axes: expecting argument to be axes handle
> > > error: evaluating if command near line 46, column 5
> > > error: evaluating if command near line 30, column 3
> > > error: called from `axes' in file
> > > `C:\Programs\msys\1.0\local\octave-3.0.4RC4\share\octave\3.0.4\m\plot\axes.m'
> > >   :
> > >   :
> > > After I noticed 'error: axes: expecting argument to be
> > > axes handle', I add two axes commands.
> > > 
> > > Is axes() command  required to plot correctly when I would
> > > use axis and so on ?
> > > 
> > > Anyway adding axes() seems to be reuired for the
> > > octave-3.0.4 So I will rewrite scripts.
> > > 
> > > Regards
> > > 
> > > Taturo
> > 
> > 
> > Hi Tatsuro,
> > also with the second axes() the script crash on 
> > cygwin 3.0.4-rc4 while it is fine on cygwin 3.0.3
> > 
> > error: get: invalid handle (= 8.0499e-315)
> > error: evaluating assignment expression near line 1414, column 9
> > error: evaluating for command near line 1413, column 3
> > error: called from `__go_draw_axes__:__calc_dimensions__' in file
> > `/pub/cygports/octave/octave-3.0.4-2/src/octave-3.0.4/scripts/plot/__go_draw_axes__.m'
> > error: evaluating assignment expression near line 297, column 8
> > error: evaluating if command near line 25, column 3
> > error: called from `__go_draw_axes__' in file
> > `/pub/cygports/octave/octave-3.0.4-2/src/octave-3.0.4/scripts/plot/__go_draw_axes__.m'
> > error: evaluating switch command near line 58, column 4
> > error: evaluating for command near line 56, column 2
> > error: evaluating if command near line 33, column 7
> > error: evaluating if command near line 26, column 5
> > error: evaluating if command near line 25, column 3
> > error: called from `__go_draw_figure__' in file
> > `/pub/cygports/octave/octave-3.0.4-2/src/octave-3.0.4/scripts/plot/__go_draw_figure__.m'
> > error: evaluating if command near line 81, column 6
> > error: evaluating if command near line 78, column 4
> > error: evaluating if command near line 76, column 2
> > error: evaluating for command near line 75, column 7
> > error: evaluating if command near line 45, column 5
> > error: called from `drawnow' in file
> > `/pub/cygports/octave/octave-3.0.4-2/src/octave-3.0.4/scripts/plot/drawnow.m'
> > 
> > so something is creating / using wrong graphics handles
> > 
> > Regards
> > Marco
> > 
> > 
> >       Passa a Yahoo! Mail.
> > 
> > La webmail che ti offre GRATIS spazio illimitato, 
> > antispam e messenger integrato.
> > http://it.mail.yahoo.com/
> > 
> 
> 
> --------------------------------------
> Power up the Internet with Yahoo! Toolbar.
> http://pr.mail.yahoo.co.jp/toolbar/
> 


--------------------------------------
Power up the Internet with Yahoo! Toolbar.
http://pr.mail.yahoo.co.jp/toolbar/


reply via email to

[Prev in Thread] Current Thread [Next in Thread]