Re: changes to graphics.cc and subplot.m

[Ben Abbott]

On Jul 22, 2013, at 3:38 AM, Ben Abbott wrote:

> On Jul 21, 2013, at 10:24 PM, Stefan Mahr wrote:
> 
>> 
>>> oops!  The test only fails for me the 1st time it is run, and only because 
>>> the axes handles are in the wrong order.
>>> 
>>> Ben
>> 
>> It's weird. With your test script I get the same results as you.
>> However, the resulting output still has different y-axis size for both
>> plots.
>> 
>> If I copy-paste your example block-wise in interactive mode, I get more
>> errors. Could it be some kind of timing problem?
> 
> The extra errors are because the test aborts after the first error.
> 
>> -----------
>> 
>> graphics_toolkit fltk
>> close all
>> hf = figure (gcf (), "__graphics_toolkit__", "fltk", "visible", "on");
>> 
>> 
>> subplot(2,1,1); plot(rand(10,1)); subplot(2,1,2); plot(rand(10,1))
>> hax = findall (gcf (), "type", "axes");
>> positions = cell2mat (get (hax, "position"));
>> outerpositions = cell2mat (get (hax, "outerposition"));
>> looseinsets = cell2mat (get (hax, "looseinset"));
>> tightinsets = cell2mat (get (hax, "tightinset"));
>> close all
>> 
>> 
>> subplot(2,1,1); plot(rand(10,1)); subplot(2,1,2); plot(rand(10,1))
>> hax = findall (gcf (), "type", "axes");
>> assert (cell2mat (get (hax, "position")), positions, 0.001)
>> assert (cell2mat (get (hax, "outerposition")), outerpositions, 0.001)
>> assert (cell2mat (get (hax, "looseinset")), looseinsets, 0.001)
>> assert (cell2mat (get (hax, "tightinset")), tightinsets, 0.001)
>> 
>> ------------------------
>> 
>>> assert (cell2mat (get (hax, "position")), positions, 0.001)
>> error: assert (cell2mat (get (hax, "position")),positions,0.001) expected
>>  0.13000   0.58384   0.77500   0.32733
>>  0.13000   0.12384   0.77500   0.32733
>> but got
>>  0.13000   0.60122   0.77500   0.30994
>>  0.13000   0.18964   0.77500   0.26152
>> maximum absolute error 0.0658047 exceeds tolerance 0.001
>> error: called from:
>> error:   /usr/share/octave/3.7.5/m/testfun/assert.m at line 235, column 5
>>> assert (cell2mat (get (hax, "outerposition")), outerpositions, 0.001)
>>> assert (cell2mat (get (hax, "looseinset")), looseinsets, 0.001)
>>> assert (cell2mat (get (hax, "tightinset")), tightinsets, 0.001)
>> error: assert (cell2mat (get (hax, "tightinset")),tightinsets,0.001)
>> expected
>>  0.042857   0.013122   0.000000   0.026316
>>  0.042857   0.013199   0.000000   0.026316
>> but got
>>  0.04286   0.09122   0.00000   0.01696
>>  0.04286   0.13964   0.00000   0.00000
>> maximum absolute error 0.126443 exceeds tolerance 0.001
>> error: called from:
>> error:   /usr/share/octave/3.7.5/m/testfun/assert.m at line 235, column 5
> 
> The second error is the one I hoped to catch.  I'll work in fixing the test.
> 
> Ben

Does the attached version isolate the second error?

Ben

stefan.m
Description: Binary data