Re: Windows Octave compilation

[Tatsuro MATSUOKA]

----- Original Message -----

> From: Tatsuro MATSUOKA 
> To: John D ; John W. Eaton ; "octave-maintainers <octave-maintainer>
> Cc: PhilipNienhuis ; "tomasek.jan
> Date: 2014/7/10, Thu 13:41
> Subject: Re: Windows Octave compilation
> ----- Original Message -----
>>  From: John D 
>>  To: 'Tatsuro MATSUOKA' ; 'John W. Eaton' 
> <address@hidden>; octave-maintainers
>>  Cc: 'PhilipNienhuis' ; tomasek.jan
>>  Date: 2014/7/10, Thu 12:48
>>  Subject: RE: Windows Octave compilation
>>  -----Original Message-----
>>  From: Tatsuro MATSUOKA [mailto:address@hidden 
>>  Sent: Wednesday, July 09, 2014 10:25 PM
>>  To: John D; John W. Eaton; address@hidden
>>  Cc: PhilipNienhuis; address@hidden
>>  Subject: Re: Windows Octave compilation
>>  ----- Original Message -----
>>>   From: John D
>>>   To: 'Tatsuro MATSUOKA'; 'John W. Eaton'  
> octave-maintainers
>>>   Cc: 'PhilipNienhuis' ; tomasek.jan
>>>   Date: 2014/7/9, Wed 19:20
>>>   Subject: RE: Windows Octave compilation
>>>   -----Original Message-----
>>>   From: Tatsuro MATSUOKA [mailto:address@hidden
>>>   Sent: Wednesday, July 09, 2014 5:08 AM
>>>   To: John D; John W. Eaton; address@hidden
>>>   Cc: PhilipNienhuis; address@hidden
>>>   Subject: Re: Windows Octave compilation
>>> 
>>>   ----- Original Message -----
>>> 
>>>>    From: Tatsuro MATSUOKA
>>>>    To: John D  John W. Eaton  "octave-maintainers" 
> <>
>>>>    Cc: PhilipNienhuis <"tomasek.jan
>>>>    Date: 2014/7/9, Wed 14:28
>>>>    Subject: Re: Windows Octave compilation
>>>> 
>>>>    ----- Original Message -----
>>>> 
>>>>>     From: John D > To: 'Tatsuro MATSUOKA'  'John 
> W. 
>>>   Eaton' 
>>>>    octave-maintainers
>>>>>     Cc: 'PhilipNienhuis' tomasek.jan
>>>>>     Date: 2014/7/9, Wed 14:14
>>>>>     Subject: RE: Windows Octave compilation
>>>>> 
>>>>> 
>>>>> 
>>>>>     -----Original Message-----
>>>>>     From: Tatsuro MATSUOKA [mailto:address@hidden
>>>>>     Sent: Tuesday, July 08, 2014 11:09 PM
>>>>>     To: John D; John W. Eaton; address@hidden
>>>>>     Cc: PhilipNienhuis; address@hidden
>>>>>     Subject: Re: Windows Octave compilation
>>>>> 
>>>>> 
>>>>> 
>>>>>     ----- Original Message -----
>>>>>>      -----Original Message-----
>>>>>>      From: Tatsuro MATSUOKA [mailto:address@hidden
>>>>>>      Sent: Tuesday, July 08, 2014 8:44 PM
>>>>>>      To: address@hidden; John W. Eaton; John D;
>>>>>>      address@hidden
>>>>>>      Cc: PhilipNienhuis; address@hidden
>>>>>>      Subject: Re: Windows Octave compilation
>>>>>> 
>>>>>>>       ----- Original Message -----
>>>>>> 
>>>>>>>>        From: John W. Eaton
>>>>>>>>        To: Tatsuro MATSUOKA ; John D ;
>>>>>     "address@hidden"
>>>>>>>>        Cc: jwe; PhilipNienhuis; "tomasek.jan
>>>>>>>>        Date: 2014/7/8, Tue 10:53
>>>>>>>>        Subject: Re: Windows Octave compilation
>>>>>>>> 
>>>>>>>>        On 07/07/2014 08:23 PM, Tatsuro MATSUOKA 
> wrote:
>>>>>>>> 
>>>>>>>>>         I have tried native build using 
> Msys+MinGW
>>>   toolchain (+
>>>>>>>>        ghostscriot+python);
>>>>>>>>> 
>>>>>>>>>         I have met following error:
>>>>>>>>> 
>>>>>>>>>         [download] gnutls
>>>>>>>>>         [build]    gnutls
>>>>>>>>> 
>>>>>>>>>         Failed to build package gnutls!
>>>>>>>>>        
>>>>    ------------------------------------------------------------
>>>>>>>>>         configure: error:
>>>>>>>>>            ***
>>>>>>>>>            *** Libnettle 2.7 was not found.
>>>>>>>>>         make[1]: *** [build-only-gnutls] Error 1
>>>>>>>>>         make[1]: Leaving directory
>>>>>>>>        
>>>   `/e/usr/Tatsu/mingw32work/octave/mxe-octave/mxe-octave'
>>>>>>>>>         real    4m18.528s
>>>>>>>>>         user    0m25.393s
>>>>>>>>>         sys     0m58.869s
>>>>>>>>>        
>>>>    ------------------------------------------------------------
>>>>>>>>>         [log]
>>>>>>>      
>>>   /e/usr/Tatsu/mingw32work/octave/mxe-octave/mxe-octave/log/gnutls
>>>>>>>>> 
>>>>>>>>>         make: ***
>>>>>>>> 
>>>>>>>      
>>>>>>>      
>>>>    
>>>>   
> [/e/usr/Tatsu/mingw32work/octave/mxe-octave/mxe-octave/installed-pack
>>>>>>>      a
>>>>>>>       ges/gnutls]
>>>>>>> 
>>>>>>>>        Error 1
>>>>>>>>> 
>>>>>>>>>         This is first time for me to see a 
> keyword 
>>  nettle.
>>>>>>>>>         Should nettle is build before gnutls on 
>>  native
>>>   windows?
>>>>>>>> 
>>>>>>>>        Did you update and build in a directory that 
>>  contained
>>>   a
>>>>    previous
>>>>>>      build?
>>>>>> 
>>>>>>>>          If so, this problem might be caused by 
> having an 
>>  old
>>>>    library
>>>>>>>>      already  installed?
>>>>>>>> 
>>>>>>>>        jwe
>>>>>>> 
>>>>>>> 
>>>>>>>       The previous build stropped due to python error 
> (python 
>>  3.4
>>>   is
>>>>    not
>>>>>>>      accepted. But I do not remember what reject python 
> 3.4). 
>>  I
>>>>>>>      uninstalled  python 3.4 and installed python 2.7. 
> After 
>>  that
>>>   I
>>>>>>>      reconfigured and
>>>>>>      executed make.
>>>>>>> 
>>>>>>>       I will try again after I clean up all directory.
>>>>>>> 
>>>>>>>       Tatsuro
>>>>>> 
>>>>>> 
>>>>>>      I deleted all components and started again: The same 
> error
>>>   happens:
>>>>>> 
>>>>>>      [build]    gnutls
>>>>>> 
>>>>>>      Failed to build package gnutls!
>>>>>>      
> ------------------------------------------------------------
>>>>>>      configure: error:
>>>>>>        ***
>>>>>>        *** Libnettle 2.7 was not found.
>>>>>>      make[1]: *** [build-only-gnutls] Error 1
>>>>>>      make[1]: Leaving directory
>>>>>>      
> `/e/usr/Tatsu/mingw32work/octave/mxe-octave/mxe-octave'
>>>>>>      real    4m1.822s
>>>>>>      user    0m25.237s
>>>>>>      sys     1m1.098s
>>>>>>      
> ------------------------------------------------------------
>>>>>>      [log]
>>>>>>      
>>  /e/usr/Tatsu/mingw32work/octave/mxe-octave/mxe-octave/log/gnutls
>>>>>> 
>>>>>>      make: ***
>>>>>>      
>>>>>> 
>>>   [/e/usr/Tatsu/mingw32work/octave/mxe-octave/mxe-octave/installed-pac
>>>>>>    ka
>>>>>>      ges/gn
>>>>>>      utls] Error 1
>>>>>> 
>>>>>>      I think that this is fault of native windows build.
>>>>>> 
>>>>>>      Tatsuro
>>>>>> 
>>>>>> 
>>>>>>      This is my first time to see about Libnettle. Perhaps 
> most
>>>   windows
>>>>>>      user do not know it.
>>>>>>      If  Libnettle 2.7 is requirements, it should also be 
> built 
>>>>>>   before
>>>>>>      gnutls build for MXE for native build.
>>>>>> 
>>>>>>      Tatsuro
>>>>>> 
>>>>>>      ---
>>>>>> 
>>>>>>      When compiling native mxe, did you source 
>>  tools/set-mxe-env.sh ?
>>>>> 
>>>>> 
>>>>>     I have executed tools/set-mxe-env.sh before "make" 
> but 
>>  the
>>>   the
>>>>    result
>>>>>     is not
>>>>>     that expected
>>>>> 
>>>>>     seeing the environmental variable list by set command.
>>>>> 
>>>>>     I have looked into mxe-octave\usr\lib and found I 
> have 
>>  found  
>>>>>   libnettle.dll.a.
>>>>> 
>>>>> 
>>>>>     I will manually execute the contents set-mxe-env.sh and see 
> the
>>>   reults.
>>>>> 
>>>>>     Thanks
>>>>> 
>>>>>     Tatsuro
>>>>> 
>>>>>     --
>>>>> 
>>>>> 
>>>>>     It needs to be 'source tools/set-mxe-env.sh' rather 
> than 
>>  just
>>>>    executing
>>>>>     tools/set-mxe-env.sh
>>>> 
>>>> 
>>>>    I have misled. Thanks! Now the make goes further after manually  
>>>>   setting environmental variables in the   tools/set-mxe-env.sh
>>>> 
>>>>    Next time I will do 'source tools/set-mxe-env.sh'.
>>>> 
>>>>    Tatsuro
>>>> 
>>>   After some proceed, I have met the following:
>>>    
>>>   :
>>>   [download] fontconfig
>>>   [build]    fontconfig
>>>   [done]     fontconfig
>>>   make: *** No rule to make target
>>>   `/e/usr/Tatsu/mingw32work/octave/mxe-octave/mxe-octave/installed-packa
>>>   ges/bu
>>>   ild-gcc', needed by
>>>   `/e/usr/Tatsu/mingw32work/octave/mxe-octave/mxe-octave/installed-packa
>>>   ges/gh
>>>   ostscript'.  Stop.
>>> 
>>>   I do not find any 'ghostscript' in
>>>   
> /e/usr/Tatsu/mingw32work/octave/mxe-octave/mxe-octave/installed-packages.
>>> 
>>>   Any suggestions?
>>> 
>>>   Tatsuro
>>> 
>>>   ----
>>>   Yeah - ghostscript is a new package - I haven’t gotten it to compile 
>>>   natively yet.
>>> 
>>>   1) change the ghostscript.mk file to not have build-gcc as a 
>>>   dependency, and
>>>   add:
>>>   ifeq ($(USE_SYSTEM_GCC),no)
>>>       $(PKG)_DEPS     += build-gcc
>>>   Endif
>>> 
>>>   2) touch installed-packages/ghostscript
>>> 
>>>   3) You will need a version of ghostscript installed on your computer 
>>>   and include the pathtoghostscript/bin in your path.
>>> 
>> 
>>  I changed the ghostscript.mk file and try to build again:
>> 
>> 
>>  Failed to build package ghostscript!
>>  ------------------------------------------------------------
>>  ./obj/gscdefs.c:84:41: warning: unknown escape sequence: '\X' 
>>  [enabled by default]
>>  ./obj/gscdefs.c:84:41: warning: unknown escape sequence: '\T' 
>>  [enabled by default]
>>  make[2]: *** [obj/gscdefs.o] Error 1
>>  make[2]: Leaving directory 
>> 
> `/e/usr/Tatsu/mingw32work/octave/mxe-octave/mxe-octave/tmp-ghostscript/ghostscript-9.07'
>>  make[1]: *** [build-only-ghostscript] Error 2
>>  make[1]: Leaving directory 
>>  `/e/usr/Tatsu/mingw32work/octave/mxe-octave/mxe-octave'
>> 
>>  I looked into the log file
>>  (Waring ignored)
>>  gcc  -DHAVE_FILE64 -DHAVE_FSEEKO  -DHAVE_FONTCONFIG -DHAVE_LIBIDN 
>>  -DHAVE_SETLOCALE   -DHAVE_BSWAP32  -DHAVE_STRERROR -O 
>>  -I/e/usr/Tatsu/mingw32work/octave/mxe-octave/mxe-octave/usr/include  -Wall 
>>  -Wstrict-prototypes -Wundef -Wmissing-declarations -Wmissing-prototypes 
>>  -Wwrite-strings -Wno-strict-aliasing -Wdeclaration-after-statement 
> -fno-builtin 
>>  -fno-common -DHAVE_STDINT_H=1 -DHAVE_DIRENT_H=1 -DHAVE_SYS_TIME_H=1 
>>  -DHAVE_INTTYPES_H=1 -DGX_COLOR_INDEX_TYPE="unsigned long long"  
>>  -DNOCONTRIB -DUSE_LIBICONV_GNU 
>>  -Ie:/usr/Tatsu/mingw32work/octave/mxe-octave/mxe-octave/usr/include    
> -I./obj 
>>  -I./base  -DWHICH_CMS="lcms2" -o ./obj/gscdefs.o -c 
> ./obj/gscdefs.c
>> 
>>  ./obj/gscdefs.c:84:41: error: incomplete universal character name \u
>> 
>> 
>>  The ghostscript binary for windows is easily available.
>>  What is the reason ghostscript is built from source?
>> 
>>  Tatsuro
>> 
>>  ---
>> 
>>  I pushed a change up a couple of hours ago for ghostscipt to compile ok in 
>>  Windows
> 
> 
> Thanks!
> I erased all components, cloned repository and started build.
> Now I am in early stage for build. 
> After build will be finished or stopped, I will report here.
> 
> Tatsuro 


The build was stopped at early stage.(gawk that was built successfully in the 
previous try.)

Failed to build package build-gawk!
------------------------------------------------------------
make[3]: *** [gawkmisc.o] Error 1
make[3]: Leaving directory 
`/e/usr/Tatsu/mingw32work/octave/mxe-octave/mxe-octae/tmp-build-gawk/gawk-4.1.1'
make[2]: *** [mingw32] Error 2
make[2]: Leaving directory 
`/e/usr/Tatsu/mingw32work/octave/mxe-octave/mxe-octae/tmp-build-gawk/gawk-4.1.1'
make[1]: *** [build-only-build-gawk] Error 2

log:(related error)
gcc -c -D__USE_MINGW_ANSI_STDIO -O2 -gdwarf-2 -g3 -DGAWK -I. -DHAVE_CONFIG_H 
-DDEFLIBPATH="\"c:/gnu/lib/gawk\"" -DSHLIBEXT="\"dll\"" gawkmisc.c

In file included from gawkmisc.c:36:0:

pc/gawkmisc.pc:625:5: error: conflicting types for 'execvp'
 int execvp(const char *file, const char *const *argv)
     ^

Tatsuro