[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: octave 4.0.3 - win 10
From: |
Tatsuro MATSUOKA |
Subject: |
Re: octave 4.0.3 - win 10 |
Date: |
Mon, 4 Jul 2016 08:54:07 +0900 (JST) |
----- Original Message -----
> From: PhilipNienhuis
> To: octave-maintainers
> Cc:
> Date: 2016/7/3, Sun 19:38
> Subject: Re: octave 4.0.3 - win 10
>
>t macchant wrote
>>> From: JohnD
>>
>>> To: octave-maintainers
>>> Cc:
>>> Date: 2016/7/3, Sun 10:14
>>> Subject: octave 4.0.3 - win 10
>>>
>>> On my 64 bit machine using the official installer:
>>>
>>> PASS 13022
>>> FAIL 0
>>> XFAIL 27
>>> SKIPPED 54
>>
>>
>> I have gotten slightly different results (win 10 64bit) but
>> I do not think it is serious.
>>
>>
>>
>> PASS 13023
>> FAIL 0
>> XFAIL 26
>> SKIPPED 54
>
> Hmmm, with an --enable-windows-64 cross-build I get 3 FAILs on Windows 10:
> - axis.m
> - assert.m
> (both the "usual" tolerance errors for these functions)
> and
> - ichol.m:
>>>>>> processing
>>>>>>
> C:\Programs\Octave\Octave-4.0.3_w64\share\octave\4.0.3\m\sparse\ichol.m
> ***** error <pivot equal to 0> ichol (sparse (-0))
> !!!!! error failed.
> Expected <pivot equal to 0>, but got no error
>
>
> Philip
With --enable-windows-64 cross-build I get 2 FAILs on Windows 10
PASS 13021
FAIL 2
XFAIL 26
SKIPPED 54
For axis.m and assert.m, perhaps the same tolerance errors occured as those by
Philip.
>>>>> processing
>>>>> C:\octave\Octave-4.0.3-x64\share\octave\4.0.3\m\plot\appearance\axis.m
***** test
hf = figure ("visible", "off");
unwind_protect
a = logspace (-5, 1, 10);
loglog (a, -a);
axis tight;
assert (axis (), [1e-5, 10, -10, -1e-5]);
unwind_protect_cleanup
close (hf);
end_unwind_protect
!!!!! test failed
ASSERT errors for: assert (axis (),[1e-5, 10, -10, -1e-5])
Location | Observed | Expected | Reason
(1) 1e-005 1e-005 Abs err 5.0822e-021 exceeds tol 0
(4) -1e-005 -1e-005 Abs err 5.0822e-021 exceeds tol 0
>>>>> processing
>>>>> C:\octave\Octave-4.0.3-x64\share\octave\4.0.3\m\testfun\assert.m
***** test
x = [-40:0];
y1 = (10.^x).*(10.^x);
y2 = 10.^(2*x);
assert (y1, y2, eps (y1));
fail ("assert (y1, y2 + eps*1e-70, eps (y1))");
!!!!! test failed
ASSERT errors for: assert (y1,y2,eps (y1))
Location | Observed | Expected | Reason
(11) 1e-060 1e-060 Abs err 4.1454e-076 exceeds tol
1.3818e-076
(13) 1e-056 1e-056 Abs err 3.3959e-072 exceeds tol
1.132e-072
(14) 1e-054 1e-054 Abs err 4.3467e-070 exceeds tol
1.4489e-070
(19) 1e-044 1e-044 Abs err 3.7338e-060 exceeds tol
1.2446e-060
(22) 1e-038 1e-038 Abs err 2.6101e-054 exceeds tol
1.3051e-054
(23) 1e-036 1e-036 Abs err 3.341e-052 exceeds tol
1.6705e-052
(27) 1e-028 1e-028 Abs err 2.2421e-044 exceeds tol
1.121e-044
(29) 1e-024 1e-024 Abs err 3.6734e-040 exceeds tol
1.8367e-040
I do not see FAIL on ichol.m.
Tatsuro