[mxe-octave] dev branch: build failure in documentation stage? (was Re: [mxe-octave] dev branch: build failure in install stage?)

[Tatsuro MATSUOKA]

----- Original Message -----

> From: Mike Miller 
> To: Tatsuro MATSUOKA 
> Cc: "octave-maintainers> Date: 2016/7/20, Wed 03:31
> Subject: Re: [mxe-octave] dev branch: build failure in install stage?
> 
> On Tue, Jul 19, 2016 at 12:48:10 +0900, Tatsuro MATSUOKA wrote:
>>  [mxe-octave] dev branch: build failure in install stage?
>> 
>> 
>>  revision of mxe octave 4172:4117faf76988
>> 
>> 
>>  --enable-windows64
>> 
>> 
>> 
>>    /usr/bin/install -c -m 644 libinterp/dldfcn/PKG_ADD 
> /home/tatsuro/work/octave/mxe-octave/mxe-octave-dev-w64/tmp-default-octave-install/home/tatsuro/work/octave/mxe-octave/mxe-octave-dev-w64/usr/x86_64-w64-mingw32/lib/octave/4.1.0+/oct/x86_64-w64-mingw32/PKG_ADD;
>  
> \
>>  fi
>>  cd 
> /home/tatsuro/work/octave/mxe-octave/mxe-octave-dev-w64/tmp-default-octave-install/home/tatsuro/work/octave/mxe-octave/mxe-octave-dev-w64/usr/x86_64-w64-mingw32/lib/octave/4.1.0+
>  
> && \
>>  for ltlib in libinterp/dldfcn/__delaunayn__.la libinterp/dldfcn/__eigs__.la 
> libinterp/dldfcn/__fltk_uigetfile__.la libinterp/dldfcn/__glpk__.la 
> libinterp/dldfcn/__init_fltk__.la libinterp/dldfcn/__init_gnuplot__.la 
> libinterp/dldfcn/__osmesa_print__.la libinterp/dldfcn/__voronoi__.la 
> libinterp/dldfcn/amd.la libinterp/dldfcn/audiodevinfo.la 
> libinterp/dldfcn/audioread.la libinterp/dldfcn/ccolamd.la 
> libinterp/dldfcn/chol.la libinterp/dldfcn/colamd.la 
> libinterp/dldfcn/convhulln.la libinterp/dldfcn/dmperm.la 
> libinterp/dldfcn/fftw.la libinterp/dldfcn/qr.la libinterp/dldfcn/symbfact.la 
> libinterp/dldfcn/symrcm.la; do \
>>    f=`echo $ltlib | /bin/sed 's,.*/,,'`; \
>>    dl=`/bin/sed -n -e 
> "s/dlname='\([^']*\)'/\1/p" < $f`; \
>>    if [ -n "$dl" ]; then \
>>      /usr/bin/install -c $dl 
> /home/tatsuro/work/octave/mxe-octave/mxe-octave-dev-w64/tmp-default-octave-install/home/tatsuro/work/octave/mxe-octave/mxe-octave-dev-w64/usr/x86_64-w64-mingw32/lib/octave/4.1.0+/oct/x86_64-w64-mingw32/`echo
>  
> $f | /bin/sed 's,^lib,,; s,\.la$,.oct,'`; \
>>    else \
>>      echo "error: dlname is empty in $ltlib!"; \
>>      exit 1; \
>>    fi; \
>>    lnames=`/bin/sed -n -e 
> "s/library_names='\([^']*\)'/\1/p" < $f`; 
> \
>>    if [ -n "$lnames" ]; then \
>>      rm -f $f $lnames $dl; \
>>    fi \
>>  done
>>  /bin/mkdir -p 
> /home/tatsuro/work/octave/mxe-octave/mxe-octave-dev-w64/tmp-default-octave-install/home/tatsuro/work/octave/mxe-octave/mxe-octave-dev-w64/usr/x86_64-w64-mingw32/share/octave/4.1.0+/etc
>>  f=libinterp/DOCSTRINGS; \
>>    if test -f $f; then d=; else 
> d="/home/tatsuro/work/octave/mxe-octave/mxe-octave-dev-w64/tmp-default-octave/octave-4.1.0+/";
>  
> fi; \
>>    /usr/bin/install -c -m 644 "$d$f" 
> /home/tatsuro/work/octave/mxe-octave/mxe-octave-dev-w64/tmp-default-octave-install/home/tatsuro/work/octave/mxe-octave/mxe-octave-dev-w64/usr/x86_64-w64-mingw32/share/octave/4.1.0+/etc/built-in-docstrings
>>  make[6]: *** No rule to make target `libinterp/deprecated-config.h', 
> needed by `install-deprecated-config-h'.  Stop.
>> 
>>  Is the above known issue?
> 
> No, but this should be fixed now with
> 
> http://hg.savannah.gnu.org/hgweb/octave/rev/da413c03920c
> 
> Thanks!
> 
> -- 
> mike
Perhaps time lag exists between mercurial repo. and hrdra site, I have met the 
same error using default branch source download by 
mxe-octave system.

I then cloned mecurial repo and executed ./bootstrap and archived as 
octave-4.1.0+.tar.gz
and executed make zip-dist.

I have met another error on documentation.


/bin/bash run-octave --norc --silent --no-history --path 
/home/tatsuro/work/octave/mxe-octave/mxe-octave-dev-w64/tmp-default-octave/octave-4.1.0+/doc/interpreter/
 --eval "geometryimages ('doc/interpreter/', 'voronoi', 'txt');"
/home/tatsuro/work/octave/mxe-octave/mxe-octave-dev-w64/tmp-default-octave/octave-4.1.0+/.build/libtool:
 line 11645: 
/home/tatsuro/work/octave/mxe-octave/mxe-octave-dev-w64/tmp-default-octave/octave-4.1.0+/.build/src/octave:
 No such file or directory
make[4]: *** [doc/interpreter/voronoi.txt] Error 127
make[4]: Leaving directory 
`/home/tatsuro/work/octave/mxe-octave/mxe-octave-dev-w64/tmp-default-octave/octave-4.1.0+/.build'
make[3]: *** [install-recursive] Error 1
make[3]: Leaving directory 
`/home/tatsuro/work/octave/mxe-octave/mxe-octave-dev-w64/tmp-default-octave/octave-4.1.0+/.build'
make[2]: *** [install] Error 2
make[2]: Leaving directory 
`/home/tatsuro/work/octave/mxe-octave/mxe-octave-dev-w64/tmp-default-octave/octave-4.1.0+/.build'
make[1]: *** [build-only-default-octave] Error 2
make[1]: Leaving directory 
`/home/tatsuro/work/octave/mxe-octave/mxe-octave-dev-w64'

Any suggestion?