Re: Octave on Windows with large arrays ?

[Tatsuro MATSUOKA]

----- Original Message -----

> From: Tatsuro MATSUOKA 
> To: tmacchant Julien Bect "octave-maintainers
> Cc: 
> Date: 2017/3/16, Thu 16:11
> Subject: Re: Octave on Windows with large arrays ?
> 
> 
> 
> 
> 
> ----- Original Message -----
>>  From: Tatsuro MATSUOKA
>>  To: Julien Bect  "octave-maintainers
>>  Cc: 
>>  Date: 2017/3/16, Thu 15:37
>>  Subject: Re: Octave on Windows with large arrays ?
>> 
>>  ----- Original Message -----
>>>  From: Julien Bect 
>>>  To: octave-maintainers
>>>  Date: 2017/3/16, Thu 14:51
>>>  Subject: Re: Octave on Windows with large arrays ?
>>> 
>>>  Le 16/03/2017 à 03:53, Tatsuro MATSUOKA a écrit :
>>>>   @Julien
>>>> 
>>>>   I have built octave-4.2.1 for windows with 64 bits indexing.
>>>> 
>>>>   http://www.tatsuromatsuoka.com/octave/Eng/Win/octave-4.2.1-LA-0.7z
>>>>   size  256,085,305 byte
>>>> 
>>>>   sha1sum 62e50e31a0b3c2fe9e570958accd7be91e9f9529
>>>> 
>>>>   Source
>>>>   http://www.tatsuromatsuoka.com/octave/Eng/Win/octave-4.2.1.tar.lz
>>>>   size 15,826,565
>>>>   sha1sum 057dbaa30d0ef75e84db30aeda623a2561b0d547
>>>> 
>>>>   Note that this build does not include pre-build octave-forge 
> packages.
>>>> 
>>>>   To install octave-forge packages
>>>> 
>>>>    From octave prompt, execute
>>>>   cd <install dir>/src
>>>>   build_packages
>>>> 
>>>>   you can install octave-forge packages but I have not tested yet.
>>>> 
>>>>   At this moment, this is temporal and not described in my web site.
>>>>   http://www.tatsuromatsuoka.com/octave/Eng/Win/
>>> 
>>> 
>>>  Thanks a lot Tatsuro.
>>> 
>>>  I will forward your email to my colleague who needed this.
>>> 
>>>  @++
>>>  Julien
>>> 
>> 
>> 
>>  @Julien
>> 
>> 
> 
> Correction
>>  Excuse me I have forgotten to clean up the directory so that some files and 
> 
>>  directory for 4.2.0 remains.
>>  Perhaps this will have side effect other than sizes
> 
> 
> Perhaps this will *not* have side effect other than sizes
> 
> 
>>  But I am building again after clean up.
>> 
>>  Tatsuro
> 
> 
> Tatsuro


I manually remove 4.2.0 related files and directories from archived directory 
and re-compress it on windows.

New binary (....LA-0.7z => .....LA-1.7z)
http://www.tatsuromatsuoka.com/octave/Eng/Win/octave-4.2.1-LA-1.7z
size  209,082,028 byte
sha1sum 5ec10ea6c1fe4023e785d5eaecfa6b289684bddb


Source
http://www.tatsuromatsuoka.com/octave/Eng/Win/octave-4.2.1.tar.lz
size 15,826,565
sha1sum 057dbaa30d0ef75e84db30aeda623a2561b0d547



I have executed __run_test_suite__ but hangs.

  libinterp\corefcn\lsode.cc-tst .............................. LSODE--  AT T 
(=R1) AND STEP SIZE H (=R2), THE
       CORRECTOR CONVERGENCE FAILED REPEATEDLY
       OR WITH ABS(H) = HMIN
      In above,  R1 =  0.0000000000000D+00   R2 =  0.3802108489572D-09
 LSODE--  AT T (=R1) AND STEP SIZE H (=R2), THE
       CORRECTOR CONVERGENCE FAILED REPEATEDLY
       OR WITH ABS(H) = HMIN
      In above,  R1 =  0.0000000000000D+00   R2 =  0.6424715644617D-09
 LSODE--  AT T (=R1) AND STEP SIZE H (=R2), THE
       CORRECTOR CONVERGENCE FAILED REPEATEDLY
       OR WITH ABS(H) = HMIN
      In above,  R1 =  0.0000000000000D+00   R2 =  0.4165001171641D-09
 PASS      2/5
                                                                  FAIL    3
  libinterp\corefcn\lu.cc-tst .................................panic: 
Segmentation fault -- stopping myself...


Mmmmmmmm.

Anyway I will test again against binary I am now re-building after clean up.

Tatsuro