[Openvortex-dev] Re: problems with snd_au8830 module under mandriva 2005

[Raymond]

 Erik Wrote:
> ok here it is.
>
> address@hidden assie]# cat /proc/asound/au8830/codec97#0/ac97#0-0+regs
> 0:00 = 6940
> 0:02 = 0202
> 0:04 = 0707
> 0:06 = 0007
> 0:08 = 0000
> 0:0a = 0006
> 0:0c = 0007
> 0:0e = 0040
> 0:10 = 0707
> 0:12 = 0707
> 0:14 = 0707
> 0:16 = 0707
> 0:18 = 1d1d
> 0:1a = 0000
> 0:1c = 0a0a
> 0:1e = 0000
> 0:20 = 2000
> 0:22 = 000f
> 0:24 = 0000
> 0:26 = 800f
> 0:28 = 0080
> 0:2a = 0080
> 0:2c = 0000
> 0:2e = 0000
> 0:30 = 0000
> 0:32 = 0000
> 0:34 = 0000
> 0:36 = 0000
> 0:38 = 0404
> 0:3a = 0000
> 0:3c = 0000
> 0:3e = 0000
> 0:40 = 0000
> 0:42 = 0000
> 0:44 = 0000
> 0:46 = 0000
> 0:48 = 0000
> 0:4a = 0000
> 0:4c = 0000
> 0:4e = 0000
> 0:50 = 0000
> 0:52 = 0000
> 0:54 = 0000
> 0:56 = 0000
> 0:58 = 0000
> 0:5a = 0000
> 0:5c = 0000
> 0:5e = 0000
> 0:60 = 0000
> 0:62 = 0000
> 0:64 = 0000
> 0:66 = 0000
> 0:68 = 0000
> 0:6a = 0000
> 0:6c = 0000
> 0:6e = 000c
> 0:70 = 0000
> 0:72 = 0017
> 0:74 = 0380
> 0:76 = abba
> 0:78 = 9380
> 0:7a = 0000
> 0:7c = 8384
> 0:7e = 7608
>
>
>
> 02:08.0 Class 0401: 12eb:0002 (rev fe)
>         Subsystem: 1092:3001
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
>         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 32 (1000ns min, 3000ns max), cache line size 08
>         Interrupt: pin A routed to IRQ 209
>         Region 0: Memory at 00000000fa000000 (32-bit, non-prefetchable)
> [size=256K]
>         Region 1: I/O ports at b000 [size=8]
>         Region 2: I/O ports at b400 [size=8]
>         Capabilities: [dc] Power Management version 1
>                 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>
>
> On Wed, 2005-09-14 at 12:42 +0800, Raymond wrote:
> > Erik wrote:
> > > yup i have the first problem
> > >  1. the ones where if you get 49% it's loud and on 51% quite 
silently?
> > >
> > > but then from 51 to 100% is again soft to loud .
> > >
> > > next week i can find time to recompile the whole kernel
> > >

Have your try this switch in alsamixer ?

Simple mixer control 'Sigmatel Output Bias',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]

Do this patch fix your problem ?

http://cvs.sourceforge.net/viewcvs.py/alsa/alsa-kernel/pci/ac97/ac97_codec.c?r1=1.189&r2=1.190

If the above don't work

>>> Try the following patch to log the read/write of ac97 and post the
>>> system log using dmesg. (loading au8830 and alsactl restore)
>>>
>>>
>>> alsa-driver-1.0.9b/alsa-kernel/pci/au88x0/au88x0_core.c
>>> @@ -2520,6 +2515,7 @@
>>>     vortex_t *card = (vortex_t *) codec->private_data;
>>>     unsigned int lifeboat = 0;
>>>
>>> +    printk(KERN_INFO "ac97 write %.2x : %.4x\n",addr,data);
>>>     /* wait for transactions to clear */
>>>     while (!(hwread(card->mmio, VORTEX_CODEC_CTRL) & 0x100)) {
>>>         udelay(100);
>>> @@ -2567,6 +2563,7 @@
>>>         }
>>>     } while ((data & VORTEX_CODEC_ADDMASK) !=
>>>          (addr << VORTEX_CODEC_ADDSHIFT));
>>> +    printk(KERN_INFO "ac97 read  %.2x : %.4x\n",addr,data &
>>> VORTEX_CODEC_DATMASK);
>>>
>>>     /* return data. */
>>>     return (u16) (data & VORTEX_CODEC_DATMASK);
>>>
>>