paparazzi-commits
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[paparazzi-commits] [5172] added support for crista


From: antoine drouin
Subject: [paparazzi-commits] [5172] added support for crista
Date: Tue, 27 Jul 2010 13:33:29 +0000

Revision: 5172
          http://svn.sv.gnu.org/viewvc/?view=rev&root=paparazzi&revision=5172
Author:   poine
Date:     2010-07-27 13:33:28 +0000 (Tue, 27 Jul 2010)
Log Message:
-----------
added support for crista

Modified Paths:
--------------
    paparazzi3/trunk/conf/autopilot/lisa_test_progs.makefile
    paparazzi3/trunk/sw/airborne/lisa/test/hs_gyro.c

Modified: paparazzi3/trunk/conf/autopilot/lisa_test_progs.makefile
===================================================================
--- paparazzi3/trunk/conf/autopilot/lisa_test_progs.makefile    2010-07-26 
21:23:52 UTC (rev 5171)
+++ paparazzi3/trunk/conf/autopilot/lisa_test_progs.makefile    2010-07-27 
13:33:28 UTC (rev 5172)
@@ -1176,8 +1176,9 @@
 #
 #
 
################################################################################
+
 #
-# test IMU aspirin
+# Spits every samples of one axis of gyro on IMU aspirin
 #
 hs_gyro_aspirin.ARCHDIR = $(ARCHI)
 hs_gyro_aspirin.TARGET = hs_gyro_aspirin
@@ -1214,3 +1215,74 @@
 hs_gyro_aspirin.CFLAGS += -DUSE_EXTI9_5_IRQ    # Mag Int on PB5
 hs_gyro_aspirin.CFLAGS += -DUSE_EXTI2_IRQ      # Accel Int on PD2
 hs_gyro_aspirin.CFLAGS += -DUSE_DMA1_C4_IRQ    # SPI2 Rx DMA
+
+
+#
+# Spits every samples of one axis of gyro on IMU b2
+#
+hs_gyro_b2.ARCHDIR = $(ARCHI)
+hs_gyro_b2.TARGET = hs_gyro_b2
+hs_gyro_b2.TARGETDIR = hs_gyro_b2
+hs_gyro_b2.CFLAGS  =  -I$(SRC_LISA) -I$(ARCHI) -I$(SRC_BOOZ) 
-I$(SRC_BOOZ_ARCH) -DPERIPHERALS_AUTO_INIT
+hs_gyro_b2.CFLAGS +=  -DBOARD_CONFIG=$(BOARD_CFG)
+hs_gyro_b2.srcs += lisa/test/hs_gyro.c \
+                    $(SRC_ARCH)/stm32_exceptions.c   \
+                    $(SRC_ARCH)/stm32_vector_table.c
+
+hs_gyro_b2.CFLAGS += -DUSE_LED
+hs_gyro_b2.srcs += $(SRC_ARCH)/led_hw.c
+
+hs_gyro_b2.CFLAGS += -DUSE_SYS_TIME -DSYS_TIME_LED=1
+hs_gyro_b2.CFLAGS += -DPERIODIC_TASK_PERIOD='SYS_TICS_OF_SEC((1./512.))'
+hs_gyro_b2.srcs += sys_time.c $(SRC_ARCH)/sys_time_hw.c
+
+hs_gyro_b2.CFLAGS += -DUSE_UART2 -DUART2_BAUD=B57600
+hs_gyro_b2.srcs += $(SRC_ARCH)/uart_hw.c
+
+hs_gyro_b2.CFLAGS += -DDOWNLINK -DDOWNLINK_TRANSPORT=PprzTransport 
-DDOWNLINK_DEVICE=Uart2
+hs_gyro_b2.srcs += downlink.c pprz_transport.c
+
+hs_gyro_b2.srcs += math/pprz_trig_int.c
+
+hs_gyro_b2.CFLAGS += -DBOOZ_IMU_TYPE_H=\"imu/booz_imu_b2.h\"
+hs_gyro_b2.CFLAGS += -DIMU_B2_MAG_TYPE=IMU_B2_MAG_MS2001
+hs_gyro_b2.srcs += $(SRC_BOOZ)/booz_imu.c
+hs_gyro_b2.CFLAGS += -DUSE_SPI2 -DUSE_DMA1_C4_IRQ -DUSE_EXTI2_IRQ 
-DUSE_SPI2_IRQ
+hs_gyro_b2.srcs += $(SRC_BOOZ)/imu/booz_imu_b2.c 
$(SRC_BOOZ_ARCH)/imu/booz_imu_b2_arch.c
+hs_gyro_b2.srcs += $(SRC_BOOZ)/peripherals/booz_max1168.c 
$(SRC_BOOZ_ARCH)/peripherals/booz_max1168_arch.c
+hs_gyro_b2.srcs += $(SRC_BOOZ)/peripherals/booz_ms2001.c  
$(SRC_BOOZ_ARCH)/peripherals/booz_ms2001_arch.c
+
+#
+# Spits every samples of one axis of gyro on IMU crista
+#
+hs_gyro_crista.ARCHDIR = $(ARCHI)
+hs_gyro_crista.TARGET = hs_gyro_crista
+hs_gyro_crista.TARGETDIR = hs_gyro_crista
+hs_gyro_crista.CFLAGS  =  -I$(SRC_LISA) -I$(ARCHI) -I$(SRC_BOOZ) 
-I$(SRC_BOOZ_ARCH) -DPERIPHERALS_AUTO_INIT
+hs_gyro_crista.CFLAGS +=  -DBOARD_CONFIG=$(BOARD_CFG)
+hs_gyro_crista.srcs += lisa/test/hs_gyro.c \
+                    $(SRC_ARCH)/stm32_exceptions.c   \
+                    $(SRC_ARCH)/stm32_vector_table.c
+
+hs_gyro_crista.CFLAGS += -DUSE_LED
+hs_gyro_crista.srcs += $(SRC_ARCH)/led_hw.c
+
+hs_gyro_crista.CFLAGS += -DUSE_SYS_TIME -DSYS_TIME_LED=1
+hs_gyro_crista.CFLAGS += -DPERIODIC_TASK_PERIOD='SYS_TICS_OF_SEC((1./512.))'
+hs_gyro_crista.srcs += sys_time.c $(SRC_ARCH)/sys_time_hw.c
+
+hs_gyro_crista.CFLAGS += -DUSE_UART2 -DUART2_BAUD=B57600
+hs_gyro_crista.srcs += $(SRC_ARCH)/uart_hw.c
+
+hs_gyro_crista.CFLAGS += -DDOWNLINK -DDOWNLINK_TRANSPORT=PprzTransport 
-DDOWNLINK_DEVICE=Uart2
+hs_gyro_crista.srcs += downlink.c pprz_transport.c
+
+hs_gyro_crista.srcs += math/pprz_trig_int.c
+
+hs_gyro_crista.CFLAGS += -DBOOZ_IMU_TYPE_H=\"imu/booz_imu_crista.h\" 
-DIMU_OVERRIDE_CHANNELS
+hs_gyro_crista.srcs += $(SRC_BOOZ)/booz_imu.c             \
+                        $(SRC_BOOZ)/imu/booz_imu_crista.c \
+                        $(SRC_BOOZ_ARCH)/imu/booz_imu_crista_arch.c
+hs_gyro_crista.CFLAGS += -DUSE_DMA1_C4_IRQ
+
+hs_gyro_crista.CFLAGS += -DMEASURED_SENSOR=gyro_unscaled.p 
-DMEASURED_SENSOR_NB=0

Modified: paparazzi3/trunk/sw/airborne/lisa/test/hs_gyro.c
===================================================================
--- paparazzi3/trunk/sw/airborne/lisa/test/hs_gyro.c    2010-07-26 21:23:52 UTC 
(rev 5171)
+++ paparazzi3/trunk/sw/airborne/lisa/test/hs_gyro.c    2010-07-27 13:33:28 UTC 
(rev 5172)
@@ -35,7 +35,12 @@
 
 #include "interrupt_hw.h"
 
+#ifndef MEASURED_SENSOR
+#define MEASURED_SENSOR gyro_unscaled.p
+#define MEASURED_SENSOR_NB 0
+#endif
 
+
 static inline void main_init( void );
 static inline void main_periodic_task( void );
 static inline void main_event_task( void );
@@ -87,10 +92,10 @@
   
   static uint8_t cnt;
   static int32_t samples[NB_SAMPLES];
-  const uint8_t axis = 2;
+  const uint8_t axis = MEASURED_SENSOR_NB;
   cnt++;
   if (cnt > NB_SAMPLES) cnt = 0;
-  samples[cnt] = booz_imu.gyro_unscaled.r;
+  samples[cnt] = booz_imu.MEASURED_SENSOR;
   if (cnt == 19) {
     DOWNLINK_SEND_IMU_HS_GYRO(DefaultChannel, &axis, NB_SAMPLES, samples);
   }




reply via email to

[Prev in Thread] Current Thread [Next in Thread]