[paparazzi-commits] [5514] changing names

[antoine drouin]

Revision: 5514
          http://svn.sv.gnu.org/viewvc/?view=rev&root=paparazzi&revision=5514
Author:   poine
Date:     2010-08-20 16:35:47 +0000 (Fri, 20 Aug 2010)
Log Message:
-----------
changing names

Added Paths:
-----------
    paparazzi3/trunk/conf/autopilot/subsystems/rotocraft/
    
paparazzi3/trunk/conf/autopilot/subsystems/rotocraft/radio_control_spektrum.makefile

Removed Paths:
-------------
    
paparazzi3/trunk/conf/autopilot/subsystems/rotocraft/radio_control_spektrum.makefile

Deleted: 
paparazzi3/trunk/conf/autopilot/subsystems/rotocraft/radio_control_spektrum.makefile
===================================================================
--- 
paparazzi3/trunk/conf/autopilot/subsystems/baloo/radio_control_spektrum.makefile
    2010-08-20 12:14:29 UTC (rev 5503)
+++ 
paparazzi3/trunk/conf/autopilot/subsystems/rotocraft/radio_control_spektrum.makefile
        2010-08-20 16:35:47 UTC (rev 5514)
@@ -1,19 +0,0 @@
-#
-# Autopilot
-#
-ap.CFLAGS += -DUSE_RADIO_CONTROL
-ap.CFLAGS += 
-DRADIO_CONTROL_TYPE_H=\"radio_control/booz_radio_control_spektrum.h\"
-
-ap.srcs += $(SRC_BOOZ)/booz_radio_control.c \
-           $(SRC_BOOZ)/radio_control/booz_radio_control_spektrum.c \
-          $(SRC_BOOZ_ARCH)/radio_control/booz_radio_control_spektrum_arch.c
-ifeq ($(ARCHI), arm7)
-ap.CFLAGS += -DRADIO_CONTROL_LED=1
-ap.CFLAGS += -DUSE_UART0 -DUART0_BAUD=B115200
-ap.CFLAGS += -DRADIO_CONTROL_LINK=Uart0
-else ifeq ($(ARCHI), stm32)
-ap.CFLAGS += -DRADIO_CONTROL_LED=5
-ap.CFLAGS += -DUSE_UART3 -DUART3_BAUD=B115200
-ap.CFLAGS += -DRADIO_CONTROL_LINK=Uart3
-endif
-

Copied: 
paparazzi3/trunk/conf/autopilot/subsystems/rotocraft/radio_control_spektrum.makefile
 (from rev 5512, 
paparazzi3/trunk/conf/autopilot/subsystems/baloo/radio_control_spektrum.makefile)
===================================================================
--- 
paparazzi3/trunk/conf/autopilot/subsystems/rotocraft/radio_control_spektrum.makefile
                                (rev 0)
+++ 
paparazzi3/trunk/conf/autopilot/subsystems/rotocraft/radio_control_spektrum.makefile
        2010-08-20 16:35:47 UTC (rev 5514)
@@ -0,0 +1,24 @@
+#
+# Autopilot
+#
+ifndef RADIO_CONTROL_SPEKTRUM_MODEL
+RADIO_CONTROL_SPEKTRUM_MODEL=\"booz/radio_control/booz_radio_control_spektrum_dx7se.h\"
+endif
+
+ap.CFLAGS += -DUSE_RADIO_CONTROL 
-DRADIO_CONTROL_BIND_IMPL_FUNC=radio_control_spektrum_try_bind
+ap.CFLAGS += 
-DRADIO_CONTROL_TYPE_H=\"booz/radio_control/booz_radio_control_spektrum.h\"
+ap.CFLAGS += -DRADIO_CONTROL_SPEKTRUM_MODEL_H=$(RADIO_CONTROL_SPEKTRUM_MODEL)
+
+ap.srcs += $(SRC_BOOZ)/booz_radio_control.c \
+           $(SRC_BOOZ)/radio_control/booz_radio_control_spektrum.c \
+          $(SRC_BOOZ_ARCH)/radio_control/booz_radio_control_spektrum_arch.c
+ifeq ($(ARCHI), arm7)
+ap.CFLAGS += -DRADIO_CONTROL_LED=1
+ap.CFLAGS += -DUSE_UART0 -DUART0_BAUD=B115200
+ap.CFLAGS += -DRADIO_CONTROL_LINK=Uart0
+else ifeq ($(ARCHI), stm32)
+ap.CFLAGS += -DRADIO_CONTROL_LED=5
+ap.CFLAGS += -DUSE_UART3 -DUART3_BAUD=B115200
+ap.CFLAGS += -DRADIO_CONTROL_LINK=Uart3
+endif
+