|
From: | Stephen L Hulme |
Subject: | RE: [Paparazzi-devel] Talking about Camreras and Wind- Mark Griffin |
Date: | Sat, 31 Jul 2010 00:53:42 +1200 |
Hi Mark
Thanks for pointer.
I now have constant live video feed and
remote USB button shutter control.
Both operating under <Alt> CHDK status.
Just a small amount of unavoidable text at the
bottom of the transmitted video picture.
The problems others are experiencing with
cameras are all to familiar to me.
The cheapish micro /mini board cameras are
hardly ever offered with well defined
specifications and are usually designed for
security work and lack IR filters.
Hence the problems being experienced by
C.KUO.
And those that do are extremely
expensive.
That is why I am testing the small Canon with
the hope of lifting it comfortably.
Regards
Stephen
On Wed, 28 Jul 2010 10:57:17 +0200 Mark Griffin wrote: Hi
Stephen, I
have successfully used CHDK on a Canon Ixus 80-IS. I
found that I had to disable all power save options so that the camera would
always stay on fully awake and not go to sleep. Hope
this helps. Regards,
Mark From: address@hidden
[mailto:address@hidden On Behalf Of Stephen L Hulme Hi
Everyone Re:
Camera: I have a similar
software problem with a Canon IXUS 80IS and CHDK. Following a very kind
donation from John Stowers of a Booz main, IMU and power board I have
successfully launched a 40cm MK quadrotor. I wish to carry
the mentioned cradled Canon camera and remotely trigger still shots
using the USB remote configuration.while simultaneously transmitting video
over a 5.8 GHz transmitter. To date I am having
great difficulty getting the video to display beyond three minutes without the
default script appearing on the video image. Any help with a
working script would be appreciated. Pascal previously
indicated in a PM that one of Antoine's quadrotors was running this
setup. Re :Wind
After crashing my
Funjet last summer I came back to test my old the airframe.xml code for a
rebuilt version and found the settings file wind.xml has been
removed. Christophe De Wagter maybe you could kindly set out the
proper procedure to run the strong wind
function? Regards Stephen
|
[Prev in Thread] | Current Thread | [Next in Thread] |