|
From: | Rafael Espino Gómez |
Subject: | Re: [Paparazzi-devel] BOOZ WITH Newer I2C to PWM converter for standard ESC |
Date: | Fri, 9 Dec 2011 16:54:50 +0100 |
How many escs have you ?
the converter is configured to your motor number ?
You tried
<firmware name="rotorcraft">
<define name="BOOZ_START_DELAY" value="3"/>
...
...
</firmware>
Date: Fri, 9 Dec 2011 16:26:07 +0100
From: address@hidden
To: address@hidden
Subject: Re: [Paparazzi-devel] BOOZ WITH Newer I2C to PWM converter for standard ESC
Yes, I think it's activated. In fact, now I'm using the default frame of Poine, booz2_a1.xml from the repository without any modification.
2011/12/9 Eduardo lavratti <address@hidden>
First of all ...
are your airframe configuration correct ?
its configured do mkk actuator ?
Date: Fri, 9 Dec 2011 12:16:54 +0100
From: address@hidden
To: address@hidden
Subject: [Paparazzi-devel] BOOZ WITH Newer I2C to PWM converter for standard ESC_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
Hi all,I'm trying to run standard ESC with the Booz Board. To do it, I use the newer converter I2C to PWM from Abusemark.com http://abusemark.com/store/index.php?main_page=product_info&products_id=3I have connected the GPS, and the YAI IMU working OK but the converter doesn't work. I don't know if I must put a special config frame for it, to reflash the converter, to use another address....Does anybody use it with Booz? Any recomendation?Regards,Rafael Espino.
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
[Prev in Thread] | Current Thread | [Next in Thread] |