[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] Magnetometer offset int_cmpl_quat
From: |
Romney, Jefferson S |
Subject: |
Re: [Paparazzi-devel] Magnetometer offset int_cmpl_quat |
Date: |
Tue, 5 Jun 2012 02:04:33 +0000 |
git://gist.github.com/2872011.git here is the url for my airframe file.
________________________________________
From: address@hidden address@hidden on behalf of Felix Ruess address@hidden
Sent: Monday, June 04, 2012 5:37 PM
To: address@hidden
Subject: Re: [Paparazzi-devel] Magnetometer offset int_cmpl_quat
Can you please post your full config (airframe file)? Preferrably gist or
pastebin...
Otherwise it's impossible to tell what exactly you are using....
On Tue, Jun 5, 2012 at 1:30 AM, Romney, Jefferson S
<address@hidden<mailto:address@hidden>> wrote:
This is the magnetometer calibration from my airframe file:
<section name="IMU" prefix="IMU_">
<define name="MAG_X_SIGN" value="1"/>
<define name="MAG_Y_SIGN" value="1"/>
<define name="MAG_Z_SIGN" value="1"/>
</section>
<section name="AHRS" prefix="AHRS_">
<define name="H_X" value=" 0.5189098"/>
<define name="H_Y" value="-0.0565782"/>
<define name="H_Z" value=" 0.8529546"/>
</section>
________________________________________
From: address@hidden<mailto:address@hidden>
address@hidden<mailto:address@hidden>] on behalf of Felix Ruess
address@hidden<mailto:address@hidden>]
Sent: Monday, June 04, 2012 3:28 PM
To: address@hidden<mailto:address@hidden>
Subject: Re: [Paparazzi-devel] Magnetometer offset int_cmpl_quat
If you have an offset, but a correct mag
calibration<http://paparazzi.enac.fr/wiki/ImuCalibration#Calibrating_the_Magnetometer>
and have your local magnetic field set, then the mag axes (or signs) are wrong.
Can you please post your config?
On Mon, Jun 4, 2012 at 10:41 PM, Romney, Jefferson S
<address@hidden<mailto:address@hidden><mailto:address@hidden<mailto:address@hidden>>>
wrote:
I am using the Aspirin v2.1 with a Yapa and because of the calibration problem,
I use the int_cmpl_quat AHRS algorithm. But the magnetometer is 90 degrees off.
With this AHRS algorithm, is there any offset that can change only the
orientation of the magnetometer and not the accelerometer and gyroscope? if
not, how do I fix it? Changing the IMU_BODY offsets also switches the pitch and
roll.
_______________________________________________
Paparazzi-devel mailing list
address@hidden<mailto:address@hidden><mailto:address@hidden<mailto:address@hidden>>
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden<mailto:address@hidden>
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
- [Paparazzi-devel] Magnetometer offset int_cmpl_quat, Romney, Jefferson S, 2012/06/04
- Re: [Paparazzi-devel] Magnetometer offset int_cmpl_quat, Felix Ruess, 2012/06/04
- Re: [Paparazzi-devel] Magnetometer offset int_cmpl_quat, Romney, Jefferson S, 2012/06/04
- Re: [Paparazzi-devel] Magnetometer offset int_cmpl_quat, Felix Ruess, 2012/06/04
- Re: [Paparazzi-devel] Magnetometer offset int_cmpl_quat,
Romney, Jefferson S <=
- Re: [Paparazzi-devel] Magnetometer offset int_cmpl_quat, Romney, Jefferson S, 2012/06/05
- Re: [Paparazzi-devel] Magnetometer offset int_cmpl_quat, Felix Ruess, 2012/06/05
- Re: [Paparazzi-devel] Magnetometer offset int_cmpl_quat, Christophe De Wagter, 2012/06/05
- Re: [Paparazzi-devel] Magnetometer offset int_cmpl_quat, Romney, Jefferson S, 2012/06/05
- Re: [Paparazzi-devel] Magnetometer offset int_cmpl_quat, privé, 2012/06/05
- Re: [Paparazzi-devel] Magnetometer offset int_cmpl_quat, Felix Ruess, 2012/06/05
- Re: [Paparazzi-devel] Magnetometer offset int_cmpl_quat, David Conger, 2012/06/05