|
From: | Xavier RIVIERE |
Subject: | Re: [Paparazzi-devel] I2C fault on LISA/L |
Date: | Mon, 25 Jun 2012 18:20:56 +0200 |
User-agent: | Mozilla/5.0 (Windows NT 6.1; WOW64; rv:12.0) Gecko/20120428 Thunderbird/12.0.1 |
As I have sereval board, I do a cross test... so I put the faulty aspirin on Lisa/M and I identify some CEM problems. I changed some capacitors, and the problem is solved.
So my aspirin v1.5 is working good with the Lisa/M... all signals are good... but it still not working with Lisa/L...
I did more tests : - The new I²C work ten second and stop, whatever the configuration- The board did work with the imu... but, if I disconnect the connector, start the board, and then connect (so in hot plug), the board is working...
Well, if all the code is the same, aside the baro part, I will check it. I will check my hardware on this part and in the software.
Xavier
[Prev in Thread] | Current Thread | [Next in Thread] |