[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] Increasing PPM rate
From: |
Chris Gough |
Subject: |
Re: [Paparazzi-devel] Increasing PPM rate |
Date: |
Wed, 27 Jun 2012 11:44:05 +1000 |
Hi Gareth,
Me too, using "Cockpit SX -> IDP7 -> PPM encoder" (always has, right
back to the SVN days). It did cause me pause to wonder, but I'm not
aware of it causing a problem.
I never checked bcause I don't have a scope/logic analyser; is the PPM
signal actually a bit slow (or is it being under reported)?
Chris Gough
On Wed, Jun 27, 2012 at 9:45 AM, Gareth Roberts
<address@hidden> wrote:
> Hi all,
>
> I've got a radio conf file that seems to be working fine, except that the
> ppm_rate in messages is constantly around 47/48, rather than 50. It all
> seems to work fine, and I've flown with it quite a few times without issue.
>
> The file in question is
> https://github.com/blutack/paparazzi/blob/v3.9/conf/radios/FrSky_TFR4.xml
>
> I've searched both mailing list archives & code but can't figure out if this
> is an issue, and if so how to solve it?
> If anyone has any ideas, please let me know.
>
> Cheers,
> Gareth
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
--
.
- [Paparazzi-devel] Difference Between Fixed-point and Floating-point Schemes, Chris Wozny, 2012/06/26
- Re: [Paparazzi-devel] Difference Between Fixed-point and Floating-point Schemes, Christophe De Wagter, 2012/06/26
- Re: [Paparazzi-devel] Difference Between Fixed-point and Floating-point Schemes, Chris Wozny, 2012/06/26
- Re: [Paparazzi-devel] Difference Between Fixed-point and Floating-point Schemes, Christophe De Wagter, 2012/06/26
- Re: [Paparazzi-devel] Difference Between Fixed-point and Floating-point Schemes, Felix Ruess, 2012/06/26
- Re: [Paparazzi-devel] Difference Between Fixed-point and Floating-point Schemes, Christophe De Wagter, 2012/06/26
- Re: [Paparazzi-devel] Difference Between Fixed-point and Floating-point Schemes, Felix Ruess, 2012/06/26
- [Paparazzi-devel] Increasing PPM rate, Gareth Roberts, 2012/06/26
- Re: [Paparazzi-devel] Increasing PPM rate,
Chris Gough <=
- Re: [Paparazzi-devel] Increasing PPM rate, Stephen Dwyer, 2012/06/26
- Re: [Paparazzi-devel] Increasing PPM rate, Christophe De Wagter, 2012/06/27
- Re: [Paparazzi-devel] Increasing PPM rate, Gareth Roberts, 2012/06/27
- Re: [Paparazzi-devel] Increasing PPM rate, Stephen Dwyer, 2012/06/27
- Re: [Paparazzi-devel] Increasing PPM rate, Chris Gough, 2012/06/27
- [Paparazzi-devel] Broken package dependencies, Gabriel Fournier, 2012/06/27
- Re: [Paparazzi-devel] Broken package dependencies, Felix Ruess, 2012/06/28
- Message not available
- Re: [Paparazzi-devel] Increasing PPM rate, Gautier Hattenberger, 2012/06/28
- Re: [Paparazzi-devel] Difference Between Fixed-point and Floating-point Schemes, Prof. Dr.-Ing. Heinrich Warmers, 2012/06/26