[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] Macports install of paparazzi failing
From: |
Chris Robson |
Subject: |
Re: [Paparazzi-devel] Macports install of paparazzi failing |
Date: |
Wed, 27 Jun 2012 21:55:57 +0100 |
Hi Chris,
Thanks for the help, I've just tried this now but unfortunately it hasn't
helped.
I still get the same error.
Chris
On 27 Jun 2012, at 21:45, Chris Wozny wrote:
> Chris,
>
> I know I was racking my brain a few months ago as to why mine wouldn't
> work until I realized I hadn't done a "make clean" before my "make".
> That solved my problems.
>
> - Chris
>
> On Wed, Jun 27, 2012 at 4:42 PM, Chris Robson
> <address@hidden> wrote:
>> Hi again, I did reply to you Bernie about getting it working, but I've come
>> up against another hurdle.
>>
>> Steps I have taken:
>> installed paparazzi tools with macports
>>
>> downloaded the source code from github
>>
>> tried the make command, which results in this:
>>
>> OC gen_aircraft.ml
>> File "gen_aircraft.ml", line 1, characters 0-1:
>> Error: Error on dynamically loaded library:
>> /opt/local/lib/ocaml/dllivy-ocaml.so:
>> dlopen(/opt/local/lib/ocaml/dllivy-ocaml.so, 138): Symbol not found:
>> _IvyBindMsg
>> Referenced from: /opt/local/lib/ocaml/dllivy-ocaml.so
>> Expected in: flat namespace
>> in /opt/local/lib/ocaml/dllivy-ocaml.so
>> make[1]: *** [gen_aircraft.out] Error 2
>> make: *** [tools] Error 2
>> mmmacbook:paparazzi chrisrobson$
>>
>>
>> Any help is greatly appreciated
>> Chris
>>
>>
>> On 27 Jun 2012, at 08:39, Bernard Davison wrote:
>>
>> Have you tried the binary install? Or do you need to use MacPorts for some
>> other reason?
>>
>> You only need to install paparazzi-tools.
>> I'd ignore the paparazzi port since it hasn't been looked at for quite a
>> while.
>> I'll take a look now (and probably remove it)
>>
>> Cheers,
>> Bernie.
>>
>> On 27/06/2012, at 4:46 PM, Chris Robson wrote:
>>
>> Hi everyone,
>>
>> I tried installing paparazzi on my mac via macports. Every time I get the
>> same error, I have attached the main.log file. I followed these steps:
>> <main.log>
>> The tools that are required to work with paparazzi on a Mac are installed
>> from MacPorts. All of the commands are given by terminal commands, please
>> open your terminal first.
>> In case you already have MacPorts installed, it is advised to run the
>> following steps before proceeding:
>>
>> check that /opt/local/bin is the first entry in your PATH, easy to check by
>> giving the following command
>>
>> env
>>
>> Then give the following command to make sure your ports are up-to-date
>>
>> sudo port selfupdate && sudo port upgrade outdated
>>
>> ..great,
>>
>> you now can run the installation steps starting from step 3 below.
>>
>> Edit the file
>>
>> /opt/local/etc/macports/sources.conf
>>
>> and above the
>>
>> rsync://...
>>
>> line add
>>
>> rsync://rsync.paparazziuav.org/macports/ports/
>>
>> It is important that this line comes before the path to the standard ports
>> as some of the Paparazzi ports are intended to replace the standard
>> versions. The file is write protected so it will be necessary to be root in
>> order to edit it. The simplest way is to open a terminal window and use nano
>> thus:
>>
>> sudo nano /opt/local/etc/macports/sources.conf
>>
>> Now update the available ports with the command:
>>
>> sudo port selfupdate
>>
>> If you do not have your own copy of the paparazzi source then you now need
>> to install paparazzi:
>>
>> sudo port install paparazzi
>>
>> OR if you do already have your own copy of the paparazzi source and you want
>> to keep in then the tools required by paparazzi can be installed with the
>> command
>>
>> sudo port install paparazzi-tools
>>
>> ...Then go and have lunch, get a coffee, get some sleep. This will probably
>> take a long time.
>>
>>
>> When this didn't work I tried
>>
>> sudo port -f uninstall installed
>>
>> sudo port clean --all uninstalled
>>
>> sudo port selfupdate
>>
>> sudo port install paparazzi-tools
>>
>> or
>>
>> sudo port install paparazzi
>>
>>
>> I still get the same error. I have OSX 10.6.8, Xcode 3.2.6.
>>
>> Any help with this would be greatly appreciated.
>>
>> Chris
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
- [Paparazzi-devel] Macports install of paparazzi failing, Chris Robson, 2012/06/27
- Re: [Paparazzi-devel] Macports install of paparazzi failing, Bernard Davison, 2012/06/27
- Re: [Paparazzi-devel] Macports install of paparazzi failing, Chris Robson, 2012/06/27
- Re: [Paparazzi-devel] Macports install of paparazzi failing, Chris Robson, 2012/06/27
- Re: [Paparazzi-devel] Macports install of paparazzi failing, Bernard Davison, 2012/06/27
- Re: [Paparazzi-devel] Macports install of paparazzi failing, Chris Robson, 2012/06/27
- Re: [Paparazzi-devel] Macports install of paparazzi failing, Bernard Davison, 2012/06/27
- Re: [Paparazzi-devel] Macports install of paparazzi failing, Chris Robson, 2012/06/27
- Re: [Paparazzi-devel] Macports install of paparazzi failing, Chris Robson, 2012/06/29