Re: [Paparazzi-devel] Configuration for apogee quadrotor.
From:
Sergey Krukowski
Subject:
Re: [Paparazzi-devel] Configuration for apogee quadrotor.
Date:
Mon, 01 Dec 2014 15:53:00 +0100
It is normal for fotorcraft firmware to display the height only after gpa fix. Afaik it's because of using absolute altitude instead of height.
-------- Исходное сообщение -------- От: "Prof. Dr.-Ing. Heinrich Warmers" <address@hidden> Дата: 01.12.2014 14:37 (GMT+01:00) Кому: Paparazzi UAV devel list <address@hidden> Тема: Re: [Paparazzi-devel] Configuration for apogee quadrotor.
Hi, can you see the raw pressure value in the messages? If no have a look between the differences in makefiles of mukticopter and normal wing aircraft.
Regads Heinrich
liangchao schrieb:
><http://lists.paparazziuav.org/file/n16452/57.png> > >I found that the vertical speed is not stable, move around from 0, while >airframe laid on the table. > >And alt is always 0. > > > >-- >View this message in context: http://lists.paparazziuav.org/Configuration-for-apogee-quadrotor-tp16439p16452.html >Sent from the paparazzi-devel mailing list archive at Nabble.com. > >_______________________________________________ >Paparazzi-devel mailing list >address@hidden >https://lists.nongnu.org/mailman/listinfo/paparazzi-devel > > >
_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel