[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Partysip-dev] platform support and sw requirements
From: |
Toni Barata (EPS) |
Subject: |
RE: [Partysip-dev] platform support and sw requirements |
Date: |
Thu, 23 May 2002 16:09:10 +0100 |
Hi Aymeric,
I have some problems to compile the partysip.
For the libosip-0.8.6.tar.gz installation procedure I have followed the next
steps:
$> tar -xvzf libosip-0.X.X.tar.gz
$> mkdir linux-build
$> cd linux-build
$> ../libosip-0.X.X/configure
$> make
$> make install
For the partysip-1.4.3.tar.gz installation I have tryed to run this steps:
$> tar -xvzf partysip-1.4.3.tar.gz
$> cd partysip-1.4.3
$> ./configure --disable-debug --disable-mleak
$> make
$> make install
But when I'm in the "make" step I get the folloing error:
main.o: In function `partysip_level':
main.o(.text+0x2ad): undefined reference to `trace_enable_level'
main.o(.text+0x2d7): undefined reference to `trace_enable_level'
main.o(.text+0x301): undefined reference to `trace_enable_level'
main.o(.text+0x32b): undefined reference to `trace_enable_level'
main.o(.text+0x355): undefined reference to `trace_enable_level'
main.o(.text+0x37f): more undefined references to `trace_enable_level'
follow
main.o: In function `partysip_level':
main.o(.text+0x3a9): undefined reference to `trace_disable_level'
main.o(.text+0x3b6): undefined reference to `trace_disable_level'
main.o(.text+0x3c3): undefined reference to `trace_disable_level'
main.o(.text+0x3d0): undefined reference to `trace_disable_level'
main.o(.text+0x3dd): undefined reference to `trace_disable_level'
main.o(.text+0x3ea): more undefined references to `trace_disable_level'
follow
main.o: In function `main':
main.o(.text+0xd15): undefined reference to `trace_initialize'
collect2: ld returned 1 exit status
make[2]: *** [partysip] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all-recursive-am] Error 2
Could you tell me what is needed to done here.
thanks.
Tony
-----Original Message-----
From: Aymeric Moizard [mailto:address@hidden
Sent: quinta-feira, 23 de Maio de 2002 12:58
To: Toni Barata (EPS)
Cc: 'address@hidden'
Subject: Re: [Partysip-dev] platform support and sw requirements
Not yet.
Just ask and take a look at the archive of the mailing list.
Only linux is fully supported and is the only development platform.
I will focus on a windows port as soon as all required feature
will be implemented.
A few unresolved issue are happening on solaris. (see previous
message about the pipe())
Software requirements:
partysip-0.4.3 (use the CVS if possible)
osip-0.8.6.tar.gz (0.8.5 should work fine)
libc
Aymeric
On Thu, 23 May 2002, Toni Barata (EPS) wrote:
> Hi all,
>
> Is there any documentation refering the platform support (e.g. Red Hat
7.2)
> and Software requirements before proceeding with the instalations of the
> PartySip.
>
> Regards.
> Tony
>
> _______________________________________________
> Partysip-dev mailing list
> address@hidden
> http://mail.freesoftware.fsf.org/mailman/listinfo/partysip-dev
>