[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Partysip-dev] Problems getting started
From: |
Craig Graham |
Subject: |
[Partysip-dev] Problems getting started |
Date: |
Thu, 16 Jan 2003 21:01:14 -0000 |
I have a Linux box acting as a NAT gateway for a few Windows PCs. I am
trying to use Messenger to talk to people elsewhere via sip.
I've downloaded and installed libosip, partysip and the new version of
iptables and cannot get partysip to start if I have nat=on in the config
file. If I comment out the line or change it to nat=off then the server runs
and Messenger can sign into it but cannot connect offsite. This is the
diagnostic output with nat=on
address@hidden init.d]# /usr/local/bin/partysip -d6
Server: WellX Telecom/Partysip/0.5.3
Debug level: 6
Config name: /usr/local/etc/partysip/partysip.conf
ServerIP: 62.49.23.210
ServerName: gate.twolips-translations.co.uk,
splosh.twolips-translations.co.uk, twolips-translations.co.uk
ServerRealm: '"twolips-translations.co.uk"'
Log name: Standard output
| INFO2 | <../../src/psp_core.c: 307> serverip token 0: '62.49.23.210'
| INFO2 | <../../src/psp_core.c: 262> servername token 0:
'gate.twolips-translations.co.uk'
| INFO2 | <../../src/psp_core.c: 262> servername token 1:
'splosh.twolips-translations.co.uk'
| INFO2 | <../../src/psp_core.c: 262> servername token 2:
'twolips-translations.co.uk'
| INFO2 | <../../src/psp_osip.c: 61> osip module: Exiting!
ERROR: Could not initialize partysip!
| INFO1 | <../../src/main.c: 192> program has terminated.
I had some problems compiling; setting the shell variable "-DALPHA_FIREWALL"
did not seem to do anything, so I had to manually add it in the
config.status file after running configure and before running make. It does
not show up in partysip -V, although it does now show up in
partysip-configure. Here is the relevant output;
address@hidden init.d]# /usr/local/bin/partysip-config --cflags
-I/usr/local/include -g -O2 -DOSIP_MT -D_REENTRANT -D_THREAD_SAFE -DXOPEN_SO
URCE=500 -pedantic -DUSE_TMP_BUFFER -DALPHA_FIREWALL -DDENABLE_DEBUG -g -DEN
ABLE_TRACE -DPSP_SERVER_PREFIX="/usr/local"
address@hidden init.d]# /usr/local/bin/partysip -V
Server header: WellX/partysip-0.5.3
Server version: Partysip/0.5.3
Global Config File /usr/local
Server built: Jan 15 2003 14:49:34
Server's interface: O.1
Architecture: 32-bit
Server compiled with....
-DSTDC_HEADERS
-DHAVE_ASSERT_H
-DHAVE_CTYPE_H
-DHAVE_DLFCN_H
-DHAVE_FCNTL_H
-DHAVE_MALLOC_H
-DHAVE_SEMAPHORE_H
-DHAVE_SIGNAL_H
-DHAVE_STDARG_H
-DHAVE_STDDEF_H
-DHAVE_STDIO_H
-DHAVE_STDLIB_H
-DHAVE_STRING_H
-DHAVE_STRINGS_H
-DHAVE_SYS_SEM_H
-DHAVE_SYS_SIGNAL_H
-DHAVE_SYS_SOCKET_H
-DHAVE_SYS_TIME_H
-DHAVE_SYS_TYPES_H
-DHAVE_TIME_H
-DHAVE_UNISTD_H
-DHAVE_VARARGS_H
-DPSP_SERVER_INSTALL_DIR=/usr/local
address@hidden init.d]#
Here's the evidence that I have the latest libosip;
address@hidden init.d]# ls -l /usr/local/lib/libosip*
lrwxrwxrwx 1 root root 22 Jan 8 22:19
/usr/local/lib/libosip-0.8.8.so.0 -> libosip-0.8.8.so.0.0.0*
-rwxr-xr-x 1 root root 346785 Jan 8 22:19
/usr/local/lib/libosip-0.8.8.so.0.0.0*
lrwxrwxrwx 2 root root 22 Jan 15 07:57
/usr/local/lib/libosip-0.9.3.so.0 -> libosip-0.9.3.so.0.0.0*
-rwxr-xr-x 1 root root 373407 Jan 15 07:57
/usr/local/lib/libosip-0.9.3.so.0.0.0*
-rw-r--r-- 1 root root 1093890 Jan 15 07:57
/usr/local/lib/libosip.a
-rwxr-xr-x 1 root root 725 Jan 15 07:57
/usr/local/lib/libosip.la*
lrwxrwxrwx 1 root root 22 Jan 15 07:57
/usr/local/lib/libosip.so -> libosip-0.9.3.so.0.0.0*
I've now been through everything I can think of and hope you can suggest
something!
--
Dr. Craig Graham, Software Engineer
Advanced Analysis and Integration Limited, UK. http://www.aail.co.uk/
- [Partysip-dev] Problems getting started,
Craig Graham <=