[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Plex86-devel] compilling plex86 2
From: |
Heiner Lamann |
Subject: |
Re: [Plex86-devel] compilling plex86 2 |
Date: |
Tue, 03 Dec 2002 15:21:55 +0100 |
Am 28 Nov 2002 um 12:15 hat Eric Laberge geschrieben:
> Aloha!
>
> This message is caused, as you might have guessed, by the kernel module not
> being OK.
>
> Could you execute the commands in the misc/load_module.sh file one by one and
> find out which is causing problem on your system?
> I suspect the permissions being wrong for the normal user.
I made my experiment as root!
so I tried it again:
The first time I load the module via ./load_module.sh it fails and
the syslog said
Dec 3 14:17:14 cserver kernel: retrieve_vm_pages returned error.
Dec 3 14:17:14 cserver kernel: retrieve_monitor_pages returned error
after that I tried to load the module by hand with
insmod plex86.o in kernel directory
Dec 3 14:20:35 cserver kernel: 3 monitor pages located
Dec 3 14:20:35 cserver kernel: host CR0=0x8005003B
Dec 3 14:20:35 cserver kernel:
Then I remove the module with rmmod plex86.
Now I try the script load_module.sh again.
It says that it successfully has load the module and
the syslog said
Dec 3 14:23:11 cserver kernel: 2 monitor pages located
Dec 3 14:23:11 cserver kernel: host CR0=0x8005003B
Dec 3 14:23:11 cserver kernel:
Now I start the plex86 -f win95
Dec 3 14:29:39 cserver kernel: plex86: vm_t size is 265320
Dec 3 14:29:39 cserver kernel: retrieve_phy_pages: PTE.P==0: i=1,
n=8192 laddr=0xf92cc000
Dec 3 14:29:39 cserver kernel: plex86: allocVmPages failed at 2
What goes wrong and how can i debug the source
I have build the 2.4.20 linux-kernel and successfully installed on my
machine. The Processor is an Intel Xeon with hyperthreading ...
maybe that's the problem?
Thanks for every tip, hint or reference ...
Heiner Lamann
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Plex86-devel] compilling plex86 2,
Heiner Lamann <=